1. 04 Jun, 2012 3 commits
  2. 02 Jun, 2012 1 commit
    • Daniel Vetter's avatar
      drm/i915: extract object active state flushing code · 30dfebf3
      Daniel Vetter authored
      Both busy_ioctl and the new wait_ioct need to do the same dance (or at
      least should). Some slight changes:
      - busy_ioctl now unconditionally checks for olr. Before emitting a
        require flush would have prevent the olr check and hence required a
        second call to the busy ioctl to really emit the request.
      - the timeout wait now also retires request. Not really required for
        abi-reasons, but makes a notch more sense imo.
      
      I've tested this by pimping the i-g-t test some more and also checking
      the polling behviour of the wait_rendering_timeout ioctl versus what
      busy_ioctl returns.
      
      v2: Too many people complained about unplug, new color is
      flush_active.
      
      v3: Kill the comment about the unplug moniker.
      
      v4: s/un-active/inactive/
      Reviewed-by: default avatarBen Widawsky <ben@bwidawsk.net>
      Signed-Off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      30dfebf3
  3. 01 Jun, 2012 5 commits
  4. 31 May, 2012 14 commits
  5. 30 May, 2012 17 commits
    • Paulo Zanoni's avatar
      drm/i915: add some barriers when changing DIPs · 9d9740f0
      Paulo Zanoni authored
      On IVB and older, we basically have two registers: the control and the
      data register. We write a few consecutitve times to the control
      register, and we need these writes to arrive exactly in the specified
      order.
      
      Also, when we're changing the data register, we need to guarantee that
      anything written to the control register already arrived (since
      changing the control register can change where the data register
      points to). Also, we need to make sure all the writes to the data
      register happen exactly in the specified order, and we also *can't*
      read the data register during this process, since reading and/or
      writing it will change the place it points to.
      
      So invoke the "better safe than sorry" rule and just be careful and
      put barriers everywhere :)
      
      On HSW we still have a control register that we write many times, but
      we have many data registers.
      Demanded-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      9d9740f0
    • Paulo Zanoni's avatar
      drm/i915: remove comment about HSW HDMI DIPs · c30b6110
      Paulo Zanoni authored
      HSW support is now just like all the other generations: we send AVI
      and SPD InfoFrames. There are other DIPs for HSW, but there are other
      DIPs for the previous generations too. For each gen, we can see which
      DIPs are missing by looking at the 'set_infoframes' function: we
      explicitly disable the DIPs we're not using.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      c30b6110
    • Paulo Zanoni's avatar
      drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI · b659c3db
      Paulo Zanoni authored
      The register that controls the HDMI port can be used to control the
      sDVO port. Some bits are defined only for sDVO, and SDVO_BORDER_ENABLE
      is one of those: HDMI ports that can't be used in sDVO mode don't even
      have this bit defined in their specifications.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      b659c3db
    • Paulo Zanoni's avatar
      drm/i915: don't write 0 to DIP control at HDMI init · 9d32d165
      Paulo Zanoni authored
      At this time, the HDMI port is enabled, and the DIP control register
      specification says we need to disable the port *before* disabling the
      DIPs. Also, while doing this we risk telling the HW to send the AVI
      DIPs once (not every VSync), which really seems to confuse the HW and
      trigger bugs where the DIPs are not sent.
      
      This code was here just to set the DIP register to a 'known state'
      before using it, but since now the set_infoframes functions already
      set the control registers to a known state, this code can go away.
      
      Also, the previous code disables *all* the DIP registers for *each*
      HDMI port, so we end disabling each DIP register more than once.
      
      This patch solves a problem I can reproduce on my IVB machine. When I
      boot it with just a single HDMI monitor, the AVI InfoFrames are not
      sent. With this patch, the InfoFrames are sent. Previously, I wrote a
      patch to 'touch the DIP registers after we enable the HDMI port' to
      solve this same problem, but that patch doesn't seem to be needed
      anymore after this patch.
      
      All this patch does is revert a chunk of the following commit:
      
          commit 64a8fc01
          Author: Jesse Barnes <jbarnes@virtuousgeek.org>
          Date:   Thu Sep 22 11:16:00 2011 +0530
      
              drm/i915: fix ILK+ infoframe support
      
      So bugs that can be bisected to that commit may be fixed now.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43256Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      9d32d165
    • Paulo Zanoni's avatar
      drm/i915: disable DIP while changing the port · 72b78c9d
      Paulo Zanoni authored
      The register specification says we need to do this.
      
      V2: Only write the register if the port is enabled.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      72b78c9d
    • Paulo Zanoni's avatar
      drm/i915: explicitly disable the DIPs we're not using · 0dd87d20
      Paulo Zanoni authored
      From this point on, the 'set_infoframe' functions always set the DIP
      registers to a known state, so anything done will always be undone at
      the modeset.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      0dd87d20
    • Paulo Zanoni's avatar
      drm/i915: don't wait for vblank while writing InfoFrames · 5cde2a62
      Paulo Zanoni authored
      This function is called when the pipe is disabled, so it always gets
      the 50ms timeout.
      
      This function is called once for each InfoFrame, so we actually get a
      100ms timeout. Will be more if we add more InfoFrames.
      
      Also, the spec says we need to "wait for a VSync to ensure completion
      of any pending DIP transmissions", not for a VBlank. OTOH, the
      register documentation suggests that the DIPs are sent *during* the
      VSync, so shouldn't we be waiting until *after* the VSync to ensure
      all DIPs are sent?
      
      So this wait_for_vblank seems, besides useless, totally wrong.
      
      If we ever want to change some specific InfoFrame on-the-fly (outside
      of the modeset code), the code that changes the InfoFrame will have to
      do the waiting itself, and properly.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      5cde2a62
    • Paulo Zanoni's avatar
      drm/i915: enable DIP before enabling each InfoFrame · 822974ae
      Paulo Zanoni authored
      So the write_infoframe function can assume the DIP is on.
      
      V2: Be more defensive and add WARN().
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      822974ae
    • Paulo Zanoni's avatar
      drm/i915: only set the HDMI port on the DIP once · f278d972
      Paulo Zanoni authored
      Not once for each InfoFrame. Now we have a function that allows us to
      do this.
      
      [danvet: Paulo clarified on irc that a later bugfix patch needs this
      cleanup.]
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      f278d972
    • Paulo Zanoni's avatar
      drm/i915: properly alternate between DVI and HDMI · 0c14c7f9
      Paulo Zanoni authored
      This solves problems that happen when you alternate between HDMI and
      DVI on the same port. I can reproduce these problems using DP->HDMI
      and DP->DVI adapters on a DP port.
      
      When you first plug HDMI and then plug DVI, you need to stop sending
      DIPs, even if the port is in DVI mode (see the HDMI register spec). If
      you don't stop sending DIPs, you'll see a pink vertical line on the
      left side of the screen, some modes will give you a black screen, some
      modes won't work correctly.
      
      When you first plug DVI and then plug HDMI, you need to properly
      enable the DIPs, otherwise the HW won't send them. After spending a
      lot of time investigating this, I concluded that if the DIPs are
      disabled, we should not write to the DIP register again because when
      we do this, we also set the AVI InfoFrame frequency to "once", and
      this seems to really confuse our hardware. Since this problem was not
      exactly easy to debug, I'm adopting the defensive behavior and not
      just avoing the "disable twice" sequence, but also explicitly
      selecting the AVI InfoFrame and setting its frequency to a correct
      one.
      
      Also, move the "is_dvi" check from intel_set_infoframe to the
      set_infoframes functions since now they're going to be the first ones
      to deal with the DIP registers.
      
      This patch adds the code to fix the problem, but it depends on the
      removal of some code that can't be removed right now and will come
      later in the patch series. The patch that we need is:
        - drm/i915: don't write 0 to DIP control at HDMI init
      
      [danvet: Paulo clarified that this additional patch is only required
      to make the fix complete, this patch here alone doesn't introduce a
      regression but only partially solves the problem of randomly clearing
      the dip registers.]
      
      V2: Be even more defensive by selecting AVI and setting its frequency
      outside the "is_dvi" check.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      0c14c7f9
    • Paulo Zanoni's avatar
      drm/i915: add set_infoframes to struct intel_hdmi · 687f4d06
      Paulo Zanoni authored
      We need a function that is able to fully 'set' the state of the DIP
      registers to a known state.
      
      Currently, we have the write_infoframe function that is called twice:
      once for AVI and once for SPD. The problem is that write_infoframe
      tries to keep the state of the DIP register as it is, changing only
      the minimum necessary bits. The second problem is that
      write_infoframe does twice (once for each time it is called) some
      work that should be done only once (like waiting for vblank and
      setting the port). If we add even more DIPs, it will do even more
      repeated work.
      
      This patch only adds the infrastructure keeping the code behavior the
      same as before.
      
      v2: add static keywords
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      687f4d06
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · af56e0aa
      Linus Torvalds authored
      Pull ceph updates from Sage Weil:
       "There are some updates and cleanups to the CRUSH placement code, a bug
        fix with incremental maps, several cleanups and fixes from Josh Durgin
        in the RBD block device code, a series of cleanups and bug fixes from
        Alex Elder in the messenger code, and some miscellaneous bounds
        checking and gfp cleanups/fixes."
      
      Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the
      networking people preferring "unsigned int" over just "unsigned".
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits)
        libceph: fix pg_temp updates
        libceph: avoid unregistering osd request when not registered
        ceph: add auth buf in prepare_write_connect()
        ceph: rename prepare_connect_authorizer()
        ceph: return pointer from prepare_connect_authorizer()
        ceph: use info returned by get_authorizer
        ceph: have get_authorizer methods return pointers
        ceph: ensure auth ops are defined before use
        ceph: messenger: reduce args to create_authorizer
        ceph: define ceph_auth_handshake type
        ceph: messenger: check return from get_authorizer
        ceph: messenger: rework prepare_connect_authorizer()
        ceph: messenger: check prepare_write_connect() result
        ceph: don't set WRITE_PENDING too early
        ceph: drop msgr argument from prepare_write_connect()
        ceph: messenger: send banner in process_connect()
        ceph: messenger: reset connection kvec caller
        libceph: don't reset kvec in prepare_write_banner()
        ceph: ignore preferred_osd field
        ceph: fully initialize new layout
        ...
      af56e0aa
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 65a50c95
      Linus Torvalds authored
      Pull perf updates from Ingo Molnar.
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
        perf ui browser: Stop using 'self'
        perf annotate browser: Read perf config file for settings
        perf config: Allow '_' in config file variable names
        perf annotate browser: Make feature toggles global
        perf annotate browser: The idx_asm field should be used in asm only view
        perf tools: Convert critical messages to ui__error()
        perf ui: Make --stdio default when TUI is not supported
        tools lib traceevent: Silence compiler warning on 32bit build
        perf record: Fix branch_stack type in perf_record_opts
        perf tools: Reconstruct event with modifiers from perf_event_attr
        perf top: Fix counter name fixup when fallbacking to cpu-clock
        perf tools: fix thread_map__new_by_pid_str() memory leak in error path
        perf tools: Do not use _FORTIFY_SOURCE when DEBUG=1 is specified
        tools lib traceevent: Fix signature of create_arg_item()
        tools lib traceevent: Use proper function parameter type
        tools lib traceevent: Fix freeing arg on process_dynamic_array()
        tools lib traceevent: Fix a possibly wrong memory dereference
        tools lib traceevent: Fix a possible memory leak
        tools lib traceevent: Allow expressions in __print_symbolic() fields
        perf evlist: Explicititely initialize input_name
        ...
      65a50c95
    • Linus Torvalds's avatar
      Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging · 42fe55ce
      Linus Torvalds authored
      Pull i2c updates from Jean Delvare.
      
      * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
        i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING
        i2c-dev: Add support for I2C_M_RECV_LEN
      42fe55ce
    • Linus Torvalds's avatar
      Merge git://www.linux-watchdog.org/linux-watchdog · 19ce0a99
      Linus Torvalds authored
      Pull second set of watchdog updates from Wim Van Sebroeck:
       "This changeset contains following changes:
         * Add support for multiple watchdog devices.  We use dynamically
           allocated device id's for this.
         * Add locking into the generic watchdog infrastructure.
         * Add support for dynamically allocated watchdog_device structs so
           that we can deal with devices that get unbound.
         * convert following drivers to the generic watchdog framework:
           sch5627, sch5636 and sp805_wdt.
         * Add DA9052/53 PMIC watchdog support
         * Fix printk format warnings for iTCO_wdt.c"
      
      * git://www.linux-watchdog.org/linux-watchdog:
        watchdog: iTCO_wdt.c: fix printk format warnings
        watchdog: sp805_wdt: Add clk_{un}prepare support
        watchdog: sp805_wdt: convert to watchdog core
        hwmon/sch56xx: Depend on watchdog for watchdog core functions
        watchdog: sch56xx-common: set correct bits in register()
        Watchdog: DA9052/53 PMIC watchdog support
        watchdog: sch56xx-common: Add proper ref-counting of watchdog data
        watchdog: sch56xx: Remove unnecessary checks for register changes
        watchdog: sch56xx: Use watchdog core
        watchdog: Add support for dynamically allocated watchdog_device structs
        watchdog: Add Locking support
        watchdog: watchdog_dev: Rewrite wrapper code
        watchdog: use dev_ functions
        watchdog: create all the proper device files
        watchdog: Add a flag to indicate the watchdog doesn't reboot things
        watchdog: Add multiple device support
        watchdog: watchdog_core.h: make functions extern
        watchdog: correct the name of the watchdog_core inlude file
        watchdog: Add watchdog_active() routine
        watchdog: watchdog_dev: include private header to pickup global symbol prototypes
      19ce0a99
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 6bb340c7
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Just regular fixes, bunch from intel, quieting some of the over
        zealous power warnings, and the rest just misc.
      
        I've got another pull with the remaining dma-buf bits, since the vmap
        bits are in your tree now.  I'll send tomorrow just to space things
        out a bit."
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
        drm/edid/quirks: ViewSonic VA2026w
        drm/udl: remove unused variables.
        drm/radeon: fix XFX quirk
        drm: Use stdint types for consistency
        drm: Constify params to format_check() and framebuffer_checks()
        drm/radeon: fix typo in trinity tiling setup
        drm/udl: unlock before returning in udl_gem_mmap()
        radeon: make radeon_cs_update_pages static.
        drm/i915: tune down the noise of the RP irq limit fail
        drm/i915: Remove the error message for unbinding pinned buffers
        drm/i915: Limit page allocations to lowmem (dma32) for i965
        drm/i915: always use RPNSWREQ for turbo change requests
        drm/i915: reject doubleclocked cea modes on dp
        drm/i915: Adding TV Out Missing modes.
        drm/i915: wait for a vblank to pass after tv detect
        drm/i915: no lvds quirk for HP t5740e Thin Client
        drm/i915: enable vdd when switching off the eDP panel
        drm/i915: Fix PCH PLL assertions to not assume CRTC:PLL relationship
        drm/i915: Always update RPS interrupts thresholds along with frequency
        drm/i915: properly handle interlaced bit for sdvo dtd conversion
        ...
      6bb340c7
    • Linus Torvalds's avatar
      Merge branch 'for-3.5/drivers' of git://git.kernel.dk/linux-block · a70f35af
      Linus Torvalds authored
      Pull block driver updates from Jens Axboe:
       "Here are the driver related changes for 3.5.  It contains:
      
         - The floppy changes from Jiri.  Jiri is now also marked as the
           maintainer of floppy.c, I shall be publically branding his forehead
           with red hot iron at the next opportune moment.
      
         - A batch of drbd updates and fixes from the linbit crew, as well as
           fixes from others.
      
         - Two small fixes for xen-blkfront courtesy of Jan."
      
      * 'for-3.5/drivers' of git://git.kernel.dk/linux-block: (70 commits)
        floppy: take over maintainership
        floppy: remove floppy-specific O_EXCL handling
        floppy: convert to delayed work and single-thread wq
        xen-blkfront: module exit handling adjustments
        xen-blkfront: properly name all devices
        drbd: grammar fix in log message
        drbd: check MODULE for THIS_MODULE
        drbd: Restore the request restart logic
        drbd: introduce a bio_set to allocate housekeeping bios from
        drbd: remove unused define
        drbd: bm_page_async_io: properly initialize page->private
        drbd: use the newly introduced page pool for bitmap IO
        drbd: add page pool to be used for meta data IO
        drbd: allow bitmap to change during writeout from resync_finished
        drbd: fix race between drbdadm invalidate/verify and finishing resync
        drbd: fix resend/resubmit of frozen IO
        drbd: Ensure that data_size is not 0 before using data_size-1 as index
        drbd: Delay/reject other state changes while establishing a connection
        drbd: move put_ldev from __req_mod() to the endio callback
        drbd: fix WRITE_ACKED_BY_PEER_AND_SIS to not set RQ_NET_DONE
        ...
      a70f35af