Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/chelsio/chtls/chtls_cm.c: In function 'chtls_disconnect':
drivers/crypto/chelsio/chtls/chtls_cm.c:408:21: warning:
 variable 'csk' set but not used [-Wunused-but-set-variable]

drivers/crypto/chelsio/chtls/chtls_cm.c: In function 'chtls_recv_sock':
drivers/crypto/chelsio/chtls/chtls_cm.c:1016:23: warning:
 variable 'tcph' set but not used [-Wunused-but-set-variable]

'csk' and 'tcph' are never used since introduce
in commit cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

aesni-intel_glue.c still calls crypto_fpu_init() and crypto_fpu_exit()
to register/unregister the "fpu" template.  But these functions don't
exist anymore, causing a build error.  Remove the calls to them.

Fixes: 944585a6 ("crypto: x86/aes-ni - remove special handling of AES in PCBC mode")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the new arm64 CTS-CBC implementation, return an error code rather
than crashing on inputs shorter than AES_BLOCK_SIZE bytes.  Also set
cra_blocksize to AES_BLOCK_SIZE (like is done in the cts template) to
indicate the minimum input size.

Fixes: dd597fb3 ("crypto: arm64/aes-blk - add support for CTS-CBC mode")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Both the caam ctrl file and dpaa2_caam export a couple of flags. They
use an #ifdef check to make sure that each flag is only built once,
but this fails if they are both loadable modules:

WARNING: drivers/crypto/caam/dpaa2_caam: 'caam_little_end' exported twice. Previous export was in drivers/crypto/caam/caam.ko
WARNING: drivers/crypto/caam/dpaa2_caam: 'caam_imx' exported twice. Previous export was in drivers/crypto/caam/caam.ko

Change the #ifdef to an IS_ENABLED() check in order to make it work in
all configurations. It may be better to redesign this aspect of the
two drivers in a cleaner way.

Fixes: 8d818c10 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.

Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.

Also properly copy-out the IV for chaining.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.

When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mxs-dcp driver fails to probe if sha1/sha256 are supported:

[    2.455404] mxs-dcp 80028000.dcp: Failed to register sha1 hash!
[    2.464042] mxs-dcp: probe of 80028000.dcp failed with error -22

This happens because since commit 8996eafd ("crypto: ahash - ensure
statesize is non-zero") import/export is mandatory and ahash_prepare_alg
fails on statesize == 0.

A set of dummy import/export functions were implemented in commit
9190b6fd ("crypto: mxs-dcp - Add empty hash export and import") but
statesize is still zero and the driver fails to probe. That change was
apparently part of some unrelated refactoring.

Fix by actually implementing import/export.
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the correct __le32 annotation and accessors to perform the
single round of AES encryption performed inside the AEGIS transform.
Otherwise, tcrypt reports:

  alg: aead: Test 1 failed on encryption for aegis128-generic
  00000000: 6c 25 25 4a 3c 10 1d 27 2b c1 d4 84 9a ef 7f 6e
  alg: aead: Test 1 failed on encryption for aegis128l-generic
  00000000: cd c6 e3 b8 a0 70 9d 8e c2 4f 6f fe 71 42 df 28
  alg: aead: Test 1 failed on encryption for aegis256-generic
  00000000: aa ed 07 b1 96 1d e9 e6 f2 ed b5 8e 1c 5f dc 1c

Fixes: f606a88e ("crypto: aegis - Add generic AEGIS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Omit the endian swabbing when folding the lengths of the assoc and
crypt input buffers into the state to finalize the tag. This is not
necessary given that the memory representation of the state is in
machine native endianness already.

This fixes an error reported by tcrypt running on a big endian system:

  alg: aead: Test 2 failed on encryption for morus640-generic
  00000000: a8 30 ef fb e6 26 eb 23 b0 87 dd 98 57 f3 e1 4b
  00000010: 21
  alg: aead: Test 2 failed on encryption for morus1280-generic
  00000000: 88 19 1b fb 1c 29 49 0e ee 82 2f cb 97 a6 a5 ee
  00000010: 5f

Fixes: 396be41f ("crypto: morus - Add generic MORUS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Due to an unfortunate interaction between commit fbe1a850
("crypto: lrw - Fix out-of bounds access on counter overflow") and
commit c778f96b ("crypto: lrw - Optimize tweak computation"),
we ended up with a version of next_index() that always returns 127.

Fixes: c778f96b ("crypto: lrw - Optimize tweak computation")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

replace pci_enable_msix_exact() with pci_alloc_irq_vectors(). get the
required vector count from pci_msix_vec_count().
use struct nitrox_q_vector as the argument to tasklets.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use node based allocations for queues. consider the dma address
alignment changes, while calculating the queue base address.
added checks in cleanup functions. Minor changes to queue variable names
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

check the flr capability using pcie_has_flr() and do the flr.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

fix compilation warnings with nitrox_debugfs.c while printing
atomic64_t types on arm64. typecast the atomic64_read() value to u64

This issue is reported by Ard Biesheuvel

drivers/crypto/cavium/nitrox/nitrox_debugfs.c:62:30:
warning: format ‘%lld’ expects argument of type ‘long long int’,
         but argument 3 has type ‘long int’ [-Wformat=]
  seq_printf(s, "  Posted: %lld\n", atomic64_read(&ndev->stats.posted));
                              ^
Fixes: 2a8780be (crypto: cavium/nitrox - updated debugfs information)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sparse complains thusly:

  CHECK   arch/x86/crypto/morus640-sse2-glue.c
arch/x86/crypto/morus640-sse2-glue.c:38:1: warning: symbol 'crypto_morus640_sse2_algs' was not declared. Should it be static?
  CHECK   arch/x86/crypto/morus1280-sse2-glue.c
arch/x86/crypto/morus1280-sse2-glue.c:38:1: warning: symbol 'crypto_morus1280_sse2_algs' was not declared. Should it be static?
  CHECK   arch/x86/crypto/morus1280-avx2-glue.c
arch/x86/crypto/morus1280-avx2-glue.c:38:1: warning: symbol 'crypto_morus1280_avx2_algs' was not declared. Should it be static?

and sparse is correct - these don't need to be global and polluting the namespace.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This driver implements a (part of a) network driver, and fails to
build if we have turned off networking support:

drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_fqdan_cb':
caamalg_qi2.c:(.text+0x577c): undefined reference to `napi_schedule_prep'
caamalg_qi2.c:(.text+0x578c): undefined reference to `__napi_schedule_irqoff'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_poll':
caamalg_qi2.c:(.text+0x59b8): undefined reference to `napi_complete_done'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_remove':
caamalg_qi2.c:(.text.unlikely+0x4e0): undefined reference to `napi_disable'
caamalg_qi2.c:(.text.unlikely+0x4e8): undefined reference to `netif_napi_del'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_setup':
caamalg_qi2.c:(.text.unlikely+0xc98): undefined reference to `netif_napi_add'

From what I can tell, CONFIG_NETDEVICES is the correct dependency here,
and adding it fixes the randconfig failures.

Fixes: 8d818c10 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Arnd reports that with Kees's latest VLA patches applied, the HMAC
handling in the QAT driver uses a worst case estimate of 160 bytes
for the SHA blocksize, allowing the compiler to determine the size
of the stack frame at compile time and throw a warning:

  drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_do_precomputes':
  drivers/crypto/qat/qat_common/qat_algs.c:257:1: error: the frame size
  of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Given that this worst case estimate is only 32 bytes larger than the
actual block size of SHA-512, the use of a VLA here was hiding the
excessive size of the stack frame from the compiler, and so we should
try to move these buffers off the stack.

So move the ipad/opad buffers and the various SHA state descriptors
into the tfm context struct. Since qat_alg_do_precomputes() is only
called in the context of a setkey() operation, this should be safe.
Using SHA512_BLOCK_SIZE for the size of the ipad/opad buffers allows
them to be used by SHA-1/SHA-256 as well.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following sparse warning:

drivers/crypto/ccp/psp-dev.c:444:5: warning:
 symbol 'sev_get_firmware' was not declared. Should it be static?

Fixes: e9372060 ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

quality field is currently documented as being 'per mill'.  In fact the
math involved is:

                add_hwgenerator_randomness((void *)rng_fillbuf, rc,
                                           rc * current_quality * 8 >> 10);

thus the actual definition is "bits of entropy per 1024 bits of input".

The current documentation seems to have confused multiple people
in the past, let's fix the documentation to match code.

An alternative is to change core to match driver expectations, replacing
	rc * current_quality * 8 >> 10
with
	rc * current_quality / 1000
but that has performance costs, so probably isn't a good option.

Fixes: 0f734e6e ("hwrng: add per-device entropy derating")
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Clang emits a warning about this construct:

drivers/crypto/ccp/sp-platform.c:36:36: warning: tentative array
definition assumed to have one element
static const struct acpi_device_id sp_acpi_match[];
                                   ^
1 warning generated.

Just remove the forward declarations and move the initializations up
so that they can be used in sp_get_of_version and sp_get_acpi_version.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For historical reasons, the AES-NI based implementation of the PCBC
chaining mode uses a special FPU chaining mode wrapper template to
amortize the FPU start/stop overhead over multiple blocks.

When this FPU wrapper was introduced, it supported widely used
chaining modes such as XTS and CTR (as well as LRW), but currently,
PCBC is the only remaining user.

Since there are no known users of pcbc(aes) in the kernel, let's remove
this special driver, and rely on the generic pcbc driver to encapsulate
the AES-NI core cipher.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

kfree has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Updated debugfs to provide device partname and frequency etc.
New file "stats" shows the number of requests posted, dropped and
completed.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add per device statistics like number of requests posted,
dropped and completed etc.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Get the device partname based on it's capabilities like,
core frequency, number of cores and revision id.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We already have OFB test vectors and tcrypt OFB speed tests.
Add OFB functional tests to tcrypt as well.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a generic version of output feedback mode. We already have support of
several hardware based transformations of this mode and the needed test
vectors but we somehow missed adding a generic software one. Fix this now.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add additional test vectors from "The SM4 Blockcipher Algorithm And Its
Modes Of Operations" draft-ribose-cfrg-sm4-10 and register cipher speed
tests for sm4.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

kfree_skb has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree_skb.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 11049218 ("crypto: compress - remove unused pcomp interface")
removed pcomp interface but missed cleaning up tcrypt.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds an userspace tool for displaying kernel crypto API
statistics.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch implement a generic way to get statistics about all crypto
usages.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all the users of the VLA-generating SKCIPHER_REQUEST_ON_STACK()
macro have been moved to SYNC_SKCIPHER_REQUEST_ON_STACK(), we can remove
the former.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Jamie Iles <jamie@jamieiles.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: linux-arm-kernel@axis.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>