- 23 Mar, 2011 40 commits
-
-
Michel Lespinasse authored
TestSetPageLocked() isn't being used anywhere. Also, using it would likely be an error, since the proper interface trylock_page() provides stronger ordering guarantees. Signed-off-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Zijlstra authored
This patch changes the anon_vma refcount to be 0 when the object is free. It does this by adding 1 ref to being in use in the anon_vma structure (iow. the anon_vma->head list is not empty). This allows a simpler release scheme without having to check both the refcount and the list as well as avoids taking a ref for each entry on the list. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
We need the anon_vma refcount unconditionally to simplify the anon_vma lifetime rules. Signed-off-by:
-
Peter Zijlstra authored
The normal code pattern used in the kernel is: get/put. Signed-off-by:
-
Akinobu Mita authored
Fix kconfig dependency warning to satisfy dependencies: warning: (PAGE_POISONING) selects DEBUG_PAGEALLOC which has unmet direct dependencies (DEBUG_KERNEL && ARCH_SUPPORTS_DEBUG_PAGEALLOC && (!HIBERNATION || !PPC && !SPARC) && !KMEMCHECK) Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Namhyung Kim authored
free_pcppages_bulk() frees pages from pcp lists in a round-robin fashion by keeping batch_free counter. But it doesn't need to spin if there is only one non-empty list. This can be checked by batch_free == MIGRATE_PCPTYPES. [akpm@linux-foundation.org: fix comment] Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Minchan Kim authored
Now we renamed remove_from_page_cache with delete_from_page_cache. As consistency of __remove_from_swap_cache and remove_from_swap_cache, we change internal page cache handling function name, too. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Minchan Kim authored
Now delete_from_page_cache() replaces remove_from_page_cache(). So we remove remove_from_page_cache so fs or something out of mainline will notice it when compile time and can fix it. Signed-off-by:
-
Minchan Kim authored
This patch series changes remove_from_page_cache()'s page ref counting rule. Page cache ref count is decreased in delete_from_page_cache(). So we don't need to decrease the page reference in callers. Signed-off-by:
-
Minchan Kim authored
This patch series changes remove_from_page_cache()'s page ref counting rule. Page cache ref count is decreased in delete_from_page_cache(). So we don't need to decrease the page reference in callers. Signed-off-by:
-
Minchan Kim authored
This patch series changes remove_from_page_cache()'s page ref counting rule. Page cache ref count is decreased in delete_from_page_cache(). So we don't need to decrease the page reference in callers. Signed-off-by:
-
Minchan Kim authored
Presently we increase the page refcount in add_to_page_cache() but don't decrease it in remove_from_page_cache(). Such asymmetry adds confusion, requiring that callers notice it and a comment explaining why they release a page reference. It's not a good API. A long time ago, Hugh tried it (http://lkml.org/lkml/2004/10/24/140) but gave up because reiser4's drop_page() had to unlock the page between removing it from page cache and doing the page_cache_release(). But now the situation is changed. I think at least things in current mainline don't have any obstacles. The problem is for out-of-mainline filesystems - if they have done such things as reiser4, this patch could be a problem but they will discover this at compile time since we remove remove_from_page_cache(). This patch: This function works as just wrapper remove_from_page_cache(). The difference is that it decreases page references in itself. So caller have to make sure it has a page reference before calling. This patch is ready for removing remove_from_page_cache(). Signed-off-by:
-
Miklos Szeredi authored
This function basically does: remove_from_page_cache(old); page_cache_release(old); add_to_page_cache_locked(new); Except it does this atomically, so there's no possibility for the "add" to fail because of a race. If memory cgroups are enabled, then the memory cgroup charge is also moved from the old page to the new. This function is currently used by fuse to move pages into the page cache on read, instead of copying the page contents. [minchan.kim@gmail.com: add freepage() hook to replace_page_cache_page()] Signed-off-by:Miklos Szeredi <mszeredi@suse.cz> Acked-by:
-
Gleb Natapov authored
GUP user may want to try to acquire a reference to a page if it is already in memory, but not if IO, to bring it in, is needed. For example KVM may tell vcpu to schedule another guest process if current one is trying to access swapped out page. Meanwhile, the page will be swapped in and the guest process, that depends on it, will be able to run again. This patch adds FAULT_FLAG_RETRY_NOWAIT (suggested by Linus) and FOLL_NOWAIT follow_page flags. FAULT_FLAG_RETRY_NOWAIT, when used in conjunction with VM_FAULT_ALLOW_RETRY, indicates to handle_mm_fault that it shouldn't drop mmap_sem and wait on a page, but return VM_FAULT_RETRY instead. [akpm@linux-foundation.org: improve FOLL_NOWAIT comment] Signed-off-by:
Gleb Natapov <gleb@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Acked-by:
-
Prarit Bhargava authored
While looking at some other notifier callbacks I noticed this code could use a simple cleanup. notifier_from_errno() no longer needs the if (ret)/else conditional. That same conditional is now done in notifier_from_errno(). Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
David Rientjes authored
Displaying extremely verbose meminfo for all nodes on the system is overkill for page allocation failures when the context restricts that allocation to only a subset of nodes. We don't particularly care about the state of all nodes when some are not allowed in the current context, they can have an abundance of memory but we can't allocate from that part of memory. This patch suppresses disallowed nodes from the meminfo dump on a page allocation failure if the context requires it. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
David Rientjes authored
When a page allocation failure occurs, show_mem() is called to dump the state of the VM so users may understand what happened to get into that condition. This output, however, can be extremely verbose. In irq context, it may result in significant delays that incur NMI watchdog timeouts when the machine is large (we use CONFIG_NODES_SHIFT > 8 here to define a "large" machine since the length of the show_mem() output is proportional to the number of possible nodes). This patch suppresses the show_mem() call in irq context when the kernel has CONFIG_NODES_SHIFT > 8. Signed-off-by:
-
David Rientjes authored
The oom killer is extremely verbose for machines with a large number of cpus and/or nodes. This verbosity can often be harmful if it causes other important messages to be scrolled from the kernel log and incurs a signicant time delay, specifically for kernels with CONFIG_NODES_SHIFT > 8. This patch causes only memory information to be displayed for nodes that are allowed by current's cpuset when dumping the VM state. Information for all other nodes is irrelevant to the oom condition; we don't care if there's an abundance of memory elsewhere if we can't access it. This only affects the behavior of dumping memory information when an oom is triggered. Other dumps, such as for sysrq+m, still display the unfiltered form when using the existing show_mem() interface. Additionally, the per-cpu pageset statistics are extremely verbose in oom killer output, so it is now suppressed. This removes nodes_weight(current->mems_allowed) * (1 + nr_cpus) lines from the oom killer output. Callers may use __show_mem(SHOW_MEM_FILTER_NODES) to filter disallowed nodes. Signed-off-by:
-
Eric Dumazet authored
ksoftirqd, kworker, migration, and pktgend kthreads can be created with kthread_create_on_node(), to get proper NUMA affinities for their stack and task_struct. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
All kthreads being created from a single helper task, they all use memory from a single node for their kernel stack and task struct. This patch suite creates kthread_create_on_node(), adding a 'cpu' parameter to parameters already used by kthread_create(). This parameter serves in allocating memory for the new kthread on its memory node if possible. Signed-off-by:
-
Eric Dumazet authored
Add a node parameter to alloc_thread_info(), and change its name to alloc_thread_info_node() This change is needed to allow NUMA aware kthread_create_on_cpu() Signed-off-by:
-
Eric Dumazet authored
All kthreads being created from a single helper task, they all use memory from a single node for their kernel stack and task struct. This patch suite creates kthread_create_on_cpu(), adding a 'cpu' parameter to parameters already used by kthread_create(). This parameter serves in allocating memory for the new kthread on its memory node if available. Users of this new function are : ksoftirqd, kworker, migration, pktgend... This patch: Add a node parameter to alloc_task_struct(), and change its name to alloc_task_struct_node() This change is needed to allow NUMA aware kthread_create_on_cpu() Signed-off-by:
-
Minchan Kim authored
Many migrate_page's caller check return value instead of list_empy by cf608ac1 ("mm: compaction: fix COMPACTPAGEFAILED counting"). This patch makes compaction's migrate_pages consistent with others. This patch should not change old behavior. Signed-off-by:
-
Andrea Arcangeli authored
This patch reverts 5a03b051 ("thp: use compaction in kswapd for GFP_ATOMIC order > 0") due to reports stating that kswapd CPU usage was higher and IRQs were being disabled more frequently. This was reported at http://www.spinics.net/linux/fedora/alsa-user/msg09885.html. Without this patch applied, CPU usage by kswapd hovers around the 20% mark according to the tester (Arthur Marsh: http://www.spinics.net/linux/fedora/alsa-user/msg09899.html). With this patch applied, it's around 2%. The problem is not related to THP which specifies __GFP_NO_KSWAPD but is triggered by high-order allocations hitting the low watermark for their order and waking kswapd on kernels with CONFIG_COMPACTION set. The most common trigger for this is network cards configured for jumbo frames but it's also possible it'll be triggered by fork-heavy workloads (order-1) and some wireless cards which depend on order-1 allocations. The symptoms for the user will be high CPU usage by kswapd in low-memory situations which could be confused with another writeback problem. While a patch like 5a03b051 may be reintroduced in the future, this patch plays it safe for now and reverts it. [mel@csn.ul.ie: Beefed up the changelog] Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Arthur Marsh <arthur.marsh@internode.on.net> Tested-by:
-
Nick Piggin authored
Provide a free area cache for the vmalloc virtual address allocator, based on the algorithm used by the user virtual memory allocator. This reduces the number of rbtree operations and linear traversals over the vmap extents in order to find a free area, by starting off at the last point that a free area was found. The free area cache is reset if areas are freed behind it, or if we are searching for a smaller area or alignment than last time. So allocation patterns are not changed (verified by corner-case and random test cases in userspace testing). This solves a regression caused by lazy vunmap TLB purging introduced in db64fe02 (mm: rewrite vmap layer). That patch will leave extents in the vmap allocator after they are vunmapped, and until a significant number accumulate that can be flushed in a single batch. So in a workload that vmalloc/vfree frequently, a chain of extents will build up from VMALLOC_START address, which have to be iterated over each time (giving an O(n) type of behaviour). After this patch, the search will start from where it left off, giving closer to an amortized O(1). This is verified to solve regressions reported Steven in GFS2, and Avi in KVM. Hugh's update: : I tried out the recent mmotm, and on one machine was fortunate to hit : the BUG_ON(first->va_start < addr) which seems to have been stalling : your vmap area cache patch ever since May. : I can get you addresses etc, I did dump a few out; but once I stared : at them, it was easier just to look at the code: and I cannot see how : you would be so sure that first->va_start < addr, once you've done : that addr = ALIGN(max(...), align) above, if align is over 0x1000 : (align was 0x8000 or 0x4000 in the cases I hit: ioremaps like Steve). : I originally got around it by just changing the : if (first->va_start < addr) { : to : while (first->va_start < addr) { : without thinking about it any further; but that seemed unsatisfactory, : why would we want to loop here when we've got another very similar : loop just below it? : I am never going to admit how long I've spent trying to grasp your : "while (n)" rbtree loop just above this, the one with the peculiar : if (!first && tmp->va_start < addr + size) : in. That's unfamiliar to me, I'm guessing it's designed to save a : subsequent rb_next() in a few circumstances (at risk of then setting : a wrong cached_hole_size?); but they did appear few to me, and I didn't : feel I could sign off something with that in when I don't grasp it, : and it seems responsible for extra code and mistaken BUG_ON below it. : I've reverted to the familiar rbtree loop that find_vma() does (but : with va_end >= addr as you had, to respect the additional guard page): : and then (given that cached_hole_size starts out 0) I don't see the : need for any complications below it. If you do want to keep that loop : as you had it, please add a comment to explain what it's trying to do, : and where addr is relative to first when you emerge from it. : Aren't your tests "size <= cached_hole_size" and : "addr + size > first->va_start" forgetting the guard page we want : before the next area? I've changed those. : I have not changed your many "addr + size - 1 < addr" overflow tests, : but have since come to wonder, shouldn't they be "addr + size < addr" : tests - won't the vend checks go wrong if addr + size is 0? : I have added a few comments - Wolfgang Wander's 2.6.13 description of : 1363c3cd Avoiding mmap fragmentation : helped me a lot, perhaps a pointer to that would be good too. And I found : it easier to understand when I renamed cached_start slightly and moved the : overflow label down. : This patch would go after your mm-vmap-area-cache.patch in mmotm. : Trivially, nobody is going to get that BUG_ON with this patch, and it : appears to work fine on my machines; but I have not given it anything like : the testing you did on your original, and may have broken all the : performance you were aiming for. Please take a look and test it out : integrate with yours if you're satisfied - thanks. [akpm@linux-foundation.org: add locking comment] Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Reported-and-tested-by:
Avi Kivity <avi@redhat.com> Tested-by:
"Barry J. Marson" <bmarson@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
Robert Morell authored
In systems with multiple framebuffer devices, one of the devices might be blanked while another is unblanked. In order for the backlight blanking logic to know whether to turn off the backlight for a particular framebuffer's blanking notification, it needs to be able to check if a given framebuffer device corresponds to the backlight. This plumbs the check_fb hook from core backlight through the pwm_backlight helper to allow platform code to plug in a check_fb hook. Signed-off-by:
Robert Morell <rmorell@nvidia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
-
Axel Lin authored
The following symbols are needlessly defined global: jornada_bl_init, jornada_bl_exit, jornada_lcd_init, jornada_lcd_exit. Make them static. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Randy Dunlap authored
apple_bl uses ACPI interfaces (data & code), so it should depend on ACPI. drivers/video/backlight/apple_bl.c:142: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:142: warning: its scope is only this definition or declaration, which is probably not what you want drivers/video/backlight/apple_bl.c:201: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:215: error: variable 'apple_bl_driver' has initializer but incomplete type drivers/video/backlight/apple_bl.c:216: error: unknown field 'name' specified in initializer ... Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Matthew Garrett authored
It works on hardware other than Macbook Pros, and it works on GPUs other than Nvidia. It should even work on iMacs, so change the name to match reality more precisely and include an alias so existing users don't get confused. Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Mourad De Clerck <mourad@aquazul.com> Signed-off-by:
-
Matthew Garrett authored
The SMI-based backlight control functionality may fail to work if the system is running under EFI rather than BIOS. Check that the hardware responds as expected, and exit if it doesn't. Signed-off-by:
-
Matthew Garrett authored
This driver only has to deal with two different classes of hardware, but right now it needs new DMI entries for every new machine. It turns out that there's an ACPI device that uniquely identifies Apples with backlights, so this patch reworks the driver into an ACPI one, identifies the hardware by checking the PCI vendor of the root bridge and strips out all the DMI code. It also changes the config text to clarify that it works on devices other than Macbook Pros and GPUs other than nvidia. Signed-off-by:
-
Matthew Garrett authored
Dual-GPU machines may provide more than one ACPI backlight interface. Tie the backlight device to the GPU in order to allow userspace to identify the correct interface. Signed-off-by:
Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by:
-
Matthew Garrett authored
We may eventually end up with per-connector backlights, especially with ddcci devices. Make sure that the parent node for the backlight device is the connector rather than the PCI device. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
-
Michel Dänzer authored
Allows e.g. power management daemons to control the backlight level. Inspired by the corresponding code in radeonfb. [mjg@redhat.com: updated to add backlight type and make the connector the parent device] Signed-off-by:
Michel Dänzer <michel@daenzer.net> Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
-
Matthew Garrett authored
There may be multiple ways of controlling the backlight on a given machine. Allow drivers to expose the type of interface they are providing, making it possible for userspace to make appropriate policy decisions. Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybody to change LED settings. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybody to change LED settings. Signed-off-by:
-
Donghwa Lee authored
Add a ld9040 amoled panel driver. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Uwe Kleine-König authored
And fix a typo. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Shreshtha Kumar Sahu authored
Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by:
Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
