- 03 Jul, 2020 2 commits
-
-
Damien Le Moal authored
In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.comReviewed-by:Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bob Liu authored
Commit 3ce41966 ("scsi: iscsi: Register sysfs for iscsi workqueue") enabled 'cpumask' support for iSCSI workqueues. However, it is unnecessary to set max_active = 2 since 'cpumask' can still be modified when max_active is 1. This patch sets max_active to 1 so as to keep the same behaviour as before. Link: https://lore.kernel.org/r/20200701030745.16897-1-bob.liu@oracle.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
- 30 Jun, 2020 1 commit
-
-
Tom Rix authored
clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.comReviewed-by:
James Bottomley <jejb@linux.ibm.com> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
- 27 Jun, 2020 4 commits
-
-
Christoph Hellwig authored
The mpt fusion driver still uses the legacy PCI DMA API which hardcodes atomic allocations. This caused the driver to fail to load on some powerpc VMs with incoherent DMA and small memory sizes. Switch to use the modern DMA API and sleeping allocations for large allocations instead. This is not a full cleanup of the PCI DMA API usage yet, but just enough to fix the regression caused by reducing the default atomic pool size. Link: https://lore.kernel.org/r/20200624165724.1818496-1-hch@lst.de Fixes: 3ee06a6d ("dma-pool: fix too large DMA pools on medium memory size systems") Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Javed Hasan authored
When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1. kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in INIT state kernel: host0: rport fffce5: Port is Ready kernel: host0: rport fffce5: Received PRLI request while in state Ready kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host0: rport fffce5: Received LOGO request while in state Ready kernel: host0: rport fffce5: Delete port kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy kernel: host0: rport fffce5: work event 3 kernel: host0: rport fffce5: lld callback ev 3 kernel: host0: rport fffce5: work delete Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.comReviewed-by:Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Javed Hasan authored
Handling of extra kref which is done by lookup table in case rdata is already present in list. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport. kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in INIT state kernel: host1: rport fffce5: Port is Ready kernel: host1: rport fffce5: Received PRLI request while in state Ready kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host1: rport fffce5: Received LOGO request while in state Ready kernel: host1: rport fffce5: Delete port kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.comReviewed-by: -
Dan Carpenter authored
This code doesn't make sense unless the correct "fcport" was found. Link: https://lore.kernel.org/r/20200619143041.GD267142@mwanda Fixes: 9dd9686b ("scsi: qla2xxx: Add changes for devloss timeout in driver") Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 24 Jun, 2020 6 commits
-
-
Tomas Henzl authored
The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.comCo-developed-by:
Stanislav Saner <ssaner@redhat.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Steffen Maier authored
Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51 ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51 ("s390/scsi: Convert timers to use timer_setup()") Cc: <stable@vger.kernel.org> #4.15+ Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
SeongJae Park authored
Commit cdb42bec ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") has introduced static checker warnings for potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0 ("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has tried to fix it. However, yet another potential null dereference is remaining. This commit fixes it. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com Fixes: 1ffdd2c0 ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset") Fixes: cdb42bec ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
SeongJae Park <sjpark@amazon.de> Signed-off-by:
-
Christoph Hellwig authored
We not only need the stub when libata is disabled, but also if it is modular and there are built-in SAS drivers (which can happen when SCSI_SAS_ATA is disabled). Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de Fixes: b8f1d1e0 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers") Signed-off-by:
-
Roman Bolshakov authored
The driver performs SCR (state change registration) in all modes including pure target mode. For each RSCN, scan_needed flag is set in qla2x00_handle_rscn() for the port mentioned in the RSCN and fabric rescan is scheduled. During the rescan, GNN_FT handler, qla24xx_async_gnnft_done() deletes session of the port that caused the RSCN. In target mode, the session deletion has an impact on ATIO handler, qlt_24xx_atio_pkt(). Target responds with SAM STATUS BUSY to I/O incoming from the deleted session. qlt_handle_cmd_for_atio() and qlt_handle_task_mgmt() return -EFAULT if they are not able to find session of the command/TMF, and that results in invocation of qlt_send_busy(): qlt_24xx_atio_pkt_all_vps: qla_target(0): type 6 ox_id 0014 qla_target(0): Unable to send command to target, sending BUSY status Such response causes command timeout on the initiator. Error handler thread on the initiator will be spawned to abort the commands: scsi 23:0:0:0: tag#0 abort scheduled scsi 23:0:0:0: tag#0 aborting command qla2xxx [0000:af:00.0]-188c:23: Entered qla24xx_abort_command. qla2xxx [0000:af:00.0]-801c:23: Abort command issued nexus=23:0:0 -- 0 2003. Command abort is rejected by target and fails (2003), error handler then tries to perform DEVICE RESET and TARGET RESET but they're also doomed to fail because TMFs are ignored for the deleted sessions. Then initiator makes BUS RESET that resets the link via qla2x00_full_login_lip(). BUS RESET succeeds and brings initiator port up, SAN switch detects that and sends RSCN to the target port and it fails again the same way as described above. It never goes out of the loop. The change breaks the RSCN loop by keeping initiator sessions mentioned in RSCN payload in all modes, including dual and pure target mode. Link: https://lore.kernel.org/r/20200605144435.27023-1-r.bolshakov@yadro.com Fixes: 2037ce49 ("scsi: qla2xxx: Fix stale session") Cc: Quinn Tran <qutran@marvell.com> Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Daniel Wagner <dwagner@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: stable@vger.kernel.org # v5.4+ Reviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Daniel Wagner authored
The qla2xxx driver knows when request was processed successfully or not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The upper layer needs to figure out from the rcv_rsplen and transferred_length variables if the request was transferred successfully. This is not always possible, e.g. when the request data length is 0, the transferred_length is also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's inform the upper layer (nvme_fc_fcpio_done()) when something went wrong. nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an error which aligns it with the lpfc driver. Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.deReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
- 16 Jun, 2020 3 commits
-
-
Christoph Hellwig authored
We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI devices through libata. That also includes the SAS HBA drivers in addition to native libata HBA drivers. Link: https://lore.kernel.org/r/20200615064624.37317-3-hch@lst.de Fixes: cc97923a ("block: move dma drain handling to scsi") Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Christoph Hellwig authored
SAS drivers can be compiled with ata support disabled. Provide a stub so that the drivers don't have to ifdef around wiring up ata_scsi_dma_need_drain. Link: https://lore.kernel.org/r/20200615064624.37317-2-hch@lst.deSigned-off-by:
-
Dinghao Liu authored
When ufs_bsg_alloc_desc_buffer() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. Link: https://lore.kernel.org/r/20200522045932.31795-1-dinghao.liu@zju.edu.cn Fixes: 74e5e468 (scsi: ufs-bsg: Wake the device before sending raw upiu commands) Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check -
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: 9762dc14 ("samples: add binderfs sample program Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f624 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dan Williams: "Small collection of cleanups to rework usage of ->queuedata and the GUID api" * tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using ->queuedata nvdimm/btt: stop using ->queuedata nvdimm/blk: stop using ->queuedata libnvdimm: Replace guid_copy() with import_guid() where it makes sense
-
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: f5b5a164 ("Add sample notification program") Signed-off-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fix from Darrick Wong: "A single iomap bug fix for a variable type mistake on 32-bit architectures, fixing an integer overflow problem in the unshare actor" * tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Fix unsharing of an extent >2GB on a 32-bit machine
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "We've settled down into the bugfix phase; this one fixes a resource leak on an error bailout path" * tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p update from Dominique Martinet: "Another very quiet cycle... Only one commit: increase the size of the ring used for xen transport" * tag '9p-for-5.8' of git://github.com/martinetd/linux: 9p/xen: increase XEN_9PFS_RING_ORDER
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One fix for a recent change which broke nested KVM guests on Power9. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix nested guest RC bits update
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - fix for "hex" Kconfig default to use 0x0 rather than 0 to allow these to be removed from defconfigs - fix from Ard Biesheuvel for EFI HYP mode booting * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0
-
