Skip to content

L
linux
Switch branch/tag
  1. 23 Jun, 2005 7 commits
    • Shaun Pereira's avatar
      [X25]: Selective sub-address matching with call user data. · cb65d506
      Shaun Pereira authored 
      From: Shaun Pereira <spereira@tusc.com.au>

This is the first (independent of the second) patch of two that I am
working on with x25 on linux (tested with xot on a cisco router).  Details
are as follows.

Current state of module:

A server using the current implementation (2.6.11.7) of the x25 module will
accept a call request/ incoming call packet at the listening x.25 address,
from all callers to that address, as long as NO call user data is present
in the packet header.

If the server needs to choose to accept a particular call request/ incoming
call packet arriving at its listening x25 address, then the kernel has to
allow a match of call user data present in the call request packet with its
own.  This is required when multiple servers listen at the same x25 address
and device interface.  The kernel currently matches ALL call user data, if
present.

Current Changes:

This patch is a follow up to the patch submitted previously by Andrew
Hendry, and allows the user to selectively control the number of octets of
call user data in the call request packet, that the kernel will match.  By
default no call user data is matched, even if call user data is present. 
To allow call user data matching, a cudmatchlength > 0 has to be passed
into the kernel after which the passed number of octets will be matched. 
Otherwise the kernel behavior is exactly as the original implementation.

This patch also ensures that as is normally the case, no call user data
will be present in the Call accepted / call connected packet sent back to
the caller 

Future Changes on next patch:

There are cases however when call user data may be present in the call
accepted packet.  According to the X.25 recommendation (ITU-T 10/96)
section 5.2.3.2 call user data may be present in the call accepted packet
provided the fast select facility is used.  My next patch will include this
fast select utility and the ability to send up to 128 octets call user data
in the call accepted packet provided the fast select facility is used.  I
am currently testing this, again with xot on linux and cisco.  
Signed-off-by: default avatarShaun Pereira <spereira@tusc.com.au>

(With a fix from Alexey Dobriyan <adobriyan@gmail.com>)
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb65d506
    • James Lamanna's avatar
      [EBTABLES]: vfree() checking cleanups · 68d31872
      James Lamanna authored 
      From: jlamanna@gmail.com

ebtables.c vfree() checking cleanups.

Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: default avatarDomen Puncer <domen@coderock.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      68d31872
    • Nishanth Aravamudan's avatar
      [ATALK] aarp: replace schedule_timeout() with msleep() · 285b3afe
      Nishanth Aravamudan authored 
      From: Nishanth Aravamudan <nacc@us.ibm.com>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. The current code is not wrong, but it does not account for
early return due to signals, so I think msleep() should be appropriate.
Signed-off-by: default avatarNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: default avatarDomen Puncer <domen@coderock.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      285b3afe
    • Chuck Short's avatar
      [IPV4]: Fix route.c gcc4 warnings · 7abaa27c
      Chuck Short authored 
      Signed-off by: Chuck Short <zulcss@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7abaa27c
    • Jeff Moyer's avatar
      [NETPOLL]: allow multiple netpoll_clients to register against one interface · fbeec2e1
      Jeff Moyer authored 
      This patch provides support for registering multiple netpoll clients to the
same network device.  Only one of these clients may register an rx_hook,
however.  In practice, this restriction has not been problematic.  It is
worth mentioning, though, that the current design can be easily extended to
allow for the registration of multiple rx_hooks.

The basic idea of the patch is that the rx_np pointer in the netpoll_info
structure points to the struct netpoll that has rx_hook filled in.  Aside
from this one case, there is no need for a pointer from the struct
net_device to an individual struct netpoll.

A lock is introduced to protect the setting and clearing of the np_rx
pointer.  The pointer will only be cleared upon netpoll client module
removal, and the lock should be uncontested.
Signed-off-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fbeec2e1
    • Jeff Moyer's avatar
      [NETPOLL]: Introduce a netpoll_info struct · 115c1d6e
      Jeff Moyer authored 
      This patch introduces a netpoll_info structure, which the struct net_device
will now point to instead of pointing to a struct netpoll.  The reason for
this is two-fold: 1) fields such as the rx_flags, poll_owner, and poll_lock
should be maintained per net_device, not per netpoll;  and 2) this is a first
step in providing support for multiple netpoll clients to register against the
same net_device.

The struct netpoll is now pointed to by the netpoll_info structure.  As
such, the previous behaviour of the code is preserved.
Signed-off-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      115c1d6e
    • Jeff Moyer's avatar
      [NETPOLL]: Set poll_owner to -1 before unlocking in netpoll_poll_unlock() · 6ca4f65e
      Jeff Moyer authored 
      This trivial patch moves the assignment of poll_owner to -1 inside of
the lock.  This fixes a potential SMP race in the code.
Signed-off-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ca4f65e
  3. 22 Jun, 2005 33 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7