Add dedicated serial-state request handler and add the missing sanity
check on the incoming request.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Let's be well behaved and add a sanity check on the maximum greybus
payload size to avoid underflow on the calculated buffer size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The AP must enable the FCT flow of APBA once it has received the response
from the AP that the connection between APBA and a module has been setted up.
Disable the flow of FCT tokens when destroying connections.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the control requests enabling/disabling the flow of FCT on APBA.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add control requests to enable/disable the flow of unipro FCT tokens
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to support mailbox-free control cport init on the bridges the AP must
be able to enable/disable the flow of unipro fct tokens. Add a new API that
will enable or disable on APBA the flow of fct tokens.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.

Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If user switches from fw_flashing => off mode, then we do not need
to do same things again, for example, clk_disable and wake/detect event,
as while switching to fw_flashing, driver makes sure that device goes
to off state and then brings back in fw_flashing state.

Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.

Testing Done: Tested on DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rename the 'clock_mode' parameter to a more generic 'flags' in the csi
bus configuration structure.
Define flags value for continuous clock mode.
Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add CSI configuration parameters to the configure_stream operation
response.
Currently, only the total number of lines in a second is used to configure the
the AP-Bridge CSI transmitter, all other parameters (number of CSI data
lanes, and CSI bus clock frequency) are kept hard-coded for two reasons:
1) We need to configure the CSI receiver on AP side accordingly to these
settings, before sending them to APB1 CSI transmitter.
2) We cannot use the camera module provided parameters as-is, but use
those information to compute the required bandwidth on the CSI bus, and
configure the # of CSI data lanes, and the CSI bus clock speed in a way that
satisfies that bandwidth requirement.
Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We forgot to count the size of the uart send data message header when
calculating the maximum size of the buffer that the uart driver could
send in one chunk.

This fixes the math and makes the variable a size_t to match the return
value of the call to gb_operation_get_payload_size_max();
Reported-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unimplemented svc unique_id attribute from the documentation.

This attribute made more sense when we thought we'd have an AP-module,
unlike now when the AP and SVC are both part of the same frame.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It might be of interest (to developers at least) to know when an
interface is getting created or removed from the system.

Interface creation message can further contain basic information about
the interface, like its vid/pid and mfg/prod ids.

Now, the interface is created by gb_interface_create(), which doesn't
register the intf->dev to the kernel and so the print message is rather
added to gb_interface_init() where we register the device with the
kernel.

A similar message is added to gb_interface_remove() only when the
interface was earlier initialized.

And this is how the output looks on real insertion/removal of the
module:

greybus 1-1: Interface added: VID=0x00000001, PID=0x00000001
greybus 1-1: DDBL1 Manufacturer=0x00000001, Product=0x00000001
...
greybus 1-1: Interface removed
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 9b9b046af237f5674c2f7ca991dc62332b2d4041

Bryan wants more feedback first.
Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In case GB codec module is already removed, no action is required
at the HW level. Thus, report SUCCESS to above layer.

Reporting error to above layer will cause repeated trials and won't
allow to update DPCM connections.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In response to codec module removal, user space is reported about
the event. In response to this, ALSA layer will update DAPM route
and cleanup DAPM states.
As a fallback mechanism, kernel can cleanup the DAPM state for codec
module. But, this would cause immediate playback (first trial) to fail,
since DSP is still in inconsistent state.
To avoid such situation, a workqueue is scheduled for codec cleanup
with timeout=50ms.
Thus, normally it is expected from above layers to update routes and
perform cleanup. However, fallback mechanism still holds good after
50ms.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update params, sequence in response to changes in msm8994
helper APIs
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The validation for a complete configured light is wrong and it is
reworked to make sure that only when the light is ready, will handle
request events.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If register to v4l2 fails just mark the light as not having flash so in
release we do not try to unregister.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We do not need to check for channels and lights as they can never be
NULL as a big memory array elements.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure to check for short transfers when retrieving the bridge cport
count.

Also clear the request buffer when allocating it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

All loopback transfer operations should have an identical header
format in order to facilitate bandwidth and data movement analysis.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Since parent driver (SVC) is controlling APBs directly, we do not
need to bringup APBs in its own probe.

Testing Done: Tested on EVT1.2.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The order in which cports (of a bundle) are present in the manifest blob
is important for gbsim, as it allocates hd_cport_id's for them
sequentially.

For example, if there are two cports (1 and 2, in order 1->2) present in
a bundle in the manifest blob, then gbsim allocates hd_cport_id X and
X+1 for them. This is done on the assumption that kernel will do the
same. Though it shouldn't have had any such assumptions since the
beginning.

But with a recent patch that sequence is changed, and it broke the
assumption gbsim had.

While parsing the manifest blob, the cports within a bundle are now
moved to another list using list_move() and then they are picked one by
one from the HEAD of the list.

list_move() first deletes the node and then adds it to HEAD as it uses
list_add() and not list_add_tail(). And that reverses the order in which
the cports were present in the original list.

And because of this, the messages destined for cport 1 are delivered to
cport 2 and the ones for cport 2 are delivered to cport 1.

In order to get gbsim working with greybus, keep the cport list in the
order in which they were present in manifest, by replacing list_move()
with list_move_tail().

Its a trivial patch and shouldn't have any side effects on the working
of greybus with nuttx.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

When the GB_CAMERA_CONFIGURE_STREAMS_TEST_ONLY flag is set by the caller
the configure streams operation should only test the requested settings
without modifying the hardware state. This applies for both the module,
the UniPro links power modes and the AP bridge settings. Return early
when the flag is set to avoid modifying the AP bridge CSI TX settings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There's no need to set the power mode before configuring streams, doing
it after simplifies code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Restore the module link power mode to the previous state in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Avoid duplicating the same code block multiple times.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Convert the legacy power_supply protocol driver to a bundle driver.

This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This breaks the power supply setup routine into two parts, the first one
allocates all the necessary resources and the second on registers
supplies to the required frameworks.

This is required to enable only TX on the connection, until we have
allocated all the resources, otherwise the request handler might get
called for partially initialized structures.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Convert the legacy lights protocol driver to a bundle driver.

This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This breaks the light setup routine into two parts, the first one
allocates all the necessary resources and the second on registers lights
to the required frameworks.

This is required to enable only TX on the connection, until we have
allocated all the resources, otherwise the request handler might get
called for partially initialized structures.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Convert the legacy loopback protocol driver to a bundle driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Convert the legacy raw protocol driver to a bundle driver.

This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If an incoming request comes on the connection, before the driver has
allocated its raw->device in gb_raw_connection_init(), then it might
result in a crash while printing error messages.

Fix that by using bundle->dev for printing error messages.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some of the labels are named based on what they are going to undo, while
others are based on where we failed in connection_init().

Follow only the first type of naming.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The build is broken if you try to build the arche platform driver
without the usb3163 driver enabled at the same time, so specify that
dependency in the greybus Makefile.

Testing done: 	built inside and outside of the build system against
		many different kernel versions.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

USB3613 hub driver exports control function, which allows caller
to switch the mode of operation of hub device.
As we know that, we have dependency between HUB3613 and APB's where,
HUB supposed to enter into HUB only after APB's brought out of reset.

Until now, we had all userspace driver sequences to control this,
but now since we are moving all resource management strictly to the
driver, it makes sense (even though it looks hacky) to enable control
of hub3613 from arche-platform driver.

Note that, there is another discussion where, the hub.connect IO pin may
get interfaced with MSM gpio, at that time, we can get rid of this hack
and replace it with gpio control.

Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>