- 18 Mar, 2016 5 commits
-
-
Steven Rostedt (Red Hat) authored
Joel Fernandes reported that the function tracing of preempt disabled sections was not being reported when running either the preemptirqsoff or preemptoff tracers. This was due to the fact that the function tracer callback for those tracers checked if irqs were disabled before tracing. But this fails when we want to trace preempt off locations as well. Joel explained that he wanted to see funcitons where interrupts are enabled but preemption was disabled. The expected output he wanted: <...>-2265 1d.h1 3419us : preempt_count_sub <-irq_exit <...>-2265 1d..1 3419us : __do_softirq <-irq_exit <...>-2265 1d..1 3419us : msecs_to_jiffies <-__do_softirq <...>-2265 1d..1 3420us : irqtime_account_irq <-__do_softirq <...>-2265 1d..1 3420us : __local_bh_disable_ip <-__do_softirq <...>-2265 1..s1 3421us : run_timer_softirq <-__do_softirq <...>-2265 1..s1 3421us : hrtimer_run_pending <-run_timer_softirq <...>-2265 1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq <...>-2265 1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq <...>-2265 1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq <...>-2265 1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq <...>-2265 1..s1 3423us : rcu_bh_qs <-__do_softirq <...>-2265 1d.s1 3423us : irqtime_account_irq <-__do_softirq <...>-2265 1d.s1 3423us : __local_bh_enable <-__do_softirq There's a comment saying that the irq disabled check is because there's a possible race that tracing_cpu may be set when the function is executed. But I don't remember that race. For now, I added a check for preemption being enabled too to not record the function, as there would be no race if that was the case. I need to re-investigate this, as I'm now thinking that the tracing_cpu will always be correct. But no harm in keeping the check for now, except for the slight performance hit. Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com Fixes: 5e6d2b9c "tracing: Use one prologue for the preempt irqs off tracer function tracers" Cc: stable@vget.kernel.org # 2.6.37+ Reported-by:
Joel Fernandes <agnel.joel@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Chunyu Hu authored
commit d39cdd20 ("tracing: Make tracer_flags use the right set_flag callback") introduces a potential mutex deadlock issue, as it forgets to free the mutex when allocaing the tracer_flags gets fail. The issue was found by Dan Carpenter through Smatch static code check tool. Link: http://lkml.kernel.org/r/1457958941-30265-1-git-send-email-chuhu@redhat.com Fixes: d39cdd20 ("tracing: Make tracer_flags use the right set_flag callback") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Geliang Tang authored
Use kasprintf() instead of kmalloc() and snprintf(). Link: http://lkml.kernel.org/r/135a7bc36e51fd9eaa57124dd2140285b771f738.1458050835.git.geliangtang@163.comAcked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Jiri Olsa authored
Currently dynamic ftrace calls are updated any time the ftrace_ops is un/registered. If we do this update only when it's needed, we save lot of time for perf system wide ftrace function sampling/counting. The reason is that for system wide sampling/counting, perf creates event for each cpu in the system. Each event then registers separate copy of ftrace_ops, which ends up in FTRACE_UPDATE_CALLS updates. On servers with many cpus that means serious stall (240 cpus server): Counting: # time ./perf stat -e ftrace:function -a sleep 1 Performance counter stats for 'system wide': 370,663 ftrace:function 1.401427505 seconds time elapsed real 3m51.743s user 0m0.023s sys 3m48.569s Sampling: # time ./perf record -e ftrace:function -a sleep 1 [ perf record: Woken up 0 times to write data ] Warning: Processed 141200 events and lost 5 chunks! [ perf record: Captured and wrote 10.703 MB perf.data (135950 samples) ] real 2m31.429s user 0m0.213s sys 2m29.494s There's no reason to do the FTRACE_UPDATE_CALLS update for each event in perf case, because all the ftrace_ops always share the same filter, so the updated calls are always the same. It's required that only first ftrace_ops registration does the FTRACE_UPDATE_CALLS update (also sometimes the second if the first one used the trampoline), but the rest can be only cheaply linked into the ftrace_ops list. Counting: # time ./perf stat -e ftrace:function -a sleep 1 Performance counter stats for 'system wide': 398,571 ftrace:function 1.377503733 seconds time elapsed real 0m2.787s user 0m0.005s sys 0m1.883s Sampling: # time ./perf record -e ftrace:function -a sleep 1 [ perf record: Woken up 0 times to write data ] Warning: Processed 261730 events and lost 9 chunks! [ perf record: Captured and wrote 19.907 MB perf.data (256293 samples) ] real 1m31.948s user 0m0.309s sys 1m32.051s Link: http://lkml.kernel.org/r/1458138873-1553-6-git-send-email-jolsa@kernel.orgAcked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Jiri Olsa authored
Change __ftrace_hash_rec_update to return true in case we need to update dynamic ftrace call records. It return false in case no update is needed. Link: http://lkml.kernel.org/r/1458138873-1553-5-git-send-email-jolsa@kernel.orgAcked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 08 Mar, 2016 12 commits
-
-
Chunyu Hu authored
echo nop > /sys/kernel/debug/tracing/options/current_tracer echo 1 > /sys/kernel/debug/tracing/options/test_nop_accept echo 0 > /sys/kernel/debug/tracing/options/test_nop_accept echo 1 > /sys/kernel/debug/tracing/options/test_nop_refuse Before the fix, the dmesg is a bit ugly since a align issue. [ 191.973081] nop_test_accept flag set to 1: we accept. Now cat trace_options to see the result [ 195.156942] nop_test_refuse flag set to 1: we refuse.Now cat trace_options to see the result After the fix, the dmesg will show aligned log for nop_test_refuse and nop_test_accept. [ 2718.032413] nop_test_refuse flag set to 1: we refuse. Now cat trace_options to see the result [ 2734.253360] nop_test_accept flag set to 1: we accept. Now cat trace_options to see the result Link: http://lkml.kernel.org/r/1457444222-8654-2-git-send-email-chuhu@redhat.comSigned-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Yang Shi authored
commit 5634cc2a ("writeback: update writeback tracepoints to report cgroup") made writeback tracepoints print out cgroup path when CGROUP_WRITEBACK is enabled, but it may trigger the below bug on -rt kernel since kernfs_path and kernfs_path_len are called by tracepoints, which acquire spin lock that is sleepable on -rt kernel. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:930 in_atomic(): 1, irqs_disabled(): 0, pid: 625, name: kworker/u16:3 INFO: lockdep is turned off. Preemption disabled at:[<ffffffc000374a5c>] wb_writeback+0xec/0x830 CPU: 7 PID: 625 Comm: kworker/u16:3 Not tainted 4.4.1-rt5 #20 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Workqueue: writeback wb_workfn (flush-7:0) Call trace: [<ffffffc00008d708>] dump_backtrace+0x0/0x200 [<ffffffc00008d92c>] show_stack+0x24/0x30 [<ffffffc0007b0f40>] dump_stack+0x88/0xa8 [<ffffffc000127d74>] ___might_sleep+0x2ec/0x300 [<ffffffc000d5d550>] rt_spin_lock+0x38/0xb8 [<ffffffc0003e0548>] kernfs_path_len+0x30/0x90 [<ffffffc00036b360>] trace_event_raw_event_writeback_work_class+0xe8/0x2e8 [<ffffffc000374f90>] wb_writeback+0x620/0x830 [<ffffffc000376224>] wb_workfn+0x61c/0x950 [<ffffffc000110adc>] process_one_work+0x3ac/0xb30 [<ffffffc0001112fc>] worker_thread+0x9c/0x7a8 [<ffffffc00011a9e8>] kthread+0x190/0x1b0 [<ffffffc000086ca0>] ret_from_fork+0x10/0x30 With unlocked kernfs_* functions, synchronize_sched() has to be called in kernfs_rename which could be called in syscall path, but it is problematic. So, print out cgroup ino instead of path name, which could be converted to path name by userland. Withouth CGROUP_WRITEBACK enabled, it just prints out root dir. But, root dir ino vary from different filesystems, so printing out -1U to indicate an invalid cgroup ino. Link: http://lkml.kernel.org/r/1456996137-8354-1-git-send-email-yang.shi@linaro.orgAcked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
gcc isn't known for handling bool in structures. Instead of using bool, use an integer mask and use bit flags instead. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Add a new unreg_all() callback that can be used to remove all command-specific triggers from an event and arrange to have it called whenever a trigger file is opened with O_TRUNC set. Commands that don't want truncate semantics, or existing commands that don't implement this function simply do nothing and their triggers remain intact. Link: http://lkml.kernel.org/r/2b7d62854d01f28c19185e1bbb8f826f385edfba.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Add a new needs_rec flag for triggers that require unconditional access to trace records in order to function. Normally a trigger requires access to the contents of a trace record only if it has a filter associated with it (since filters need the contents of a record in order to make a filtering decision). Some types of triggers, such as 'hist' triggers, require access to trace record contents independent of the presence of filters, so add a new flag for those triggers. Link: http://lkml.kernel.org/r/7be8fa38f9b90fdb6c47ca0f98d20a07b9fd512b.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Add a simple per-trigger 'paused' flag, allowing individual triggers to pause. We could leave it to individual triggers that need this functionality to do it themselves, but we also want to allow other events to control pausing, so add it to the trigger data. Link: http://lkml.kernel.org/r/fed37e4879684d7dcc57fe00ce0cbf170032b06d.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Add a utility function to grab the syscall name from the syscall metadata, given a syscall id. Link: http://lkml.kernel.org/r/be26a8dfe3f15e16a837799f1c1e2b4d62742843.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Some triggers may need access to the trace event, so pass it in. Also fix up the existing trigger funcs and their callers. Link: http://lkml.kernel.org/r/543e31e9fc445ef61077421ab219033401c39846.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Make various event trigger utility functions available outside of trace_events_trigger.c so that new triggers can be defined outside of that file. Link: http://lkml.kernel.org/r/4a40c1695dd43cac6cd475d72e13ffe30ba84bff.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Tom Zanussi authored
Make is_string_field() and is_function_field() accessible outside of trace_event_filters.c for other users of ftrace_event_fields. Link: http://lkml.kernel.org/r/2d3f00d3311702e556e82eed7754bae6f017939f.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
Some trace events have conditions that check if the current CPU is online or not before recording the tracepoint. That's because certain trace events are in locations that can be called as the CPU is going offline and when RCU no longer monitors it (like kfree and friends). The check was added because trace events require RCU to be active. This is a trace event infrastructure issue and not something that individual trace events should worry about. The tracepoint.h code now has added a check to see if the current CPU is considered online, and it only does the tracepoint if it is. There's no more need for individual trace events to also include this check. It is now redundant. Cc: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Chunyu Hu authored
When I was updating the ftrace_stress test of ltp. I encountered a strange phenomemon, excute following steps: echo nop > /sys/kernel/debug/tracing/current_tracer echo 0 > /sys/kernel/debug/tracing/options/funcgraph-cpu bash: echo: write error: Invalid argument check dmesg: [ 1024.903855] nop_test_refuse flag set to 0: we refuse.Now cat trace_options to see the result The reason is that the trace option test will randomly setup trace option under tracing/options no matter what the current_tracer is. but the set_tracer_option is always using the set_flag callback from the current_tracer. This patch adds a pointer to tracer_flags and make it point to the tracer it belongs to. When the option is setup, the set_flag of the right tracer will be used no matter what the the current_tracer is. And the old dummy_tracer_flags is used for all the tracers which doesn't have a tracer_flags, having issue to use it to save the pointer of a tracer. So remove it and use dynamic dummy tracer_flags for tracers needing a dummy tracer_flags, as a result, there are no tracers sharing tracer_flags, so remove the check code. And save the current tracer to trace_option_dentry seems not good as it may waste mem space when mount the debug/trace fs more than one time. Link: http://lkml.kernel.org/r/1457444222-8654-1-git-send-email-chuhu@redhat.comSigned-off-by:
Chunyu Hu <chuhu@redhat.com> [ Fixed up function tracer options to work with the change ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 06 Mar, 2016 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fix from Olof Johansson: "Tiny fixes branch this week, in fact only one patch. Turns out the USB support for a Renesas board was developed on a pre-release board that ended up being changed before shipping. To avoid breakage on those boards, and avoid confusion, it's a reasonable idea to patch now instead of later. There are no known users of the pre-release variant any more" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: porter: remove enable prop from HS-USB device node
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Just two ARM fixes this time: one to fix the hyp-stub for older ARM CPUs, and another to fix the set_memory_xx() permission functions to deal with zero sizes correctly" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8544/1: set_memory_xx fixes ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull ceph fix from Sage Weil: "This is a final commit we missed to align the protocol compatibility with the feature bits. It decodes a few extra fields in two different messages and reports EIO when they are used (not yet supported)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI fix from Richard Weinberger: "This contains a single bug fix for UBI" * tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs: ubi: Fix out of bounds write in volume update code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "This contains three bug/build fixes" * 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: use %lx format specifiers for unsigned longs um: Export pm_power_off Revert "um: Fix get_signal() usage"
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of fixes for 4.5: - Fix the use of an undocumented syntactial variant of the .type pseudo op which is not supported by the LLVM assembler. - Fix invalid initialization on S-cache-less systems. - Fix possible information leak from the kernel stack for SIGFPE. - Fix handling of copy_{from,to}_user() return value in KVM - Fix the last instance of irq_to_gpio() which now was causing build errors" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp' MIPS: kvm: Fix ioctl error handling. MIPS: scache: Fix scache init with invalid line size. MIPS: Avoid variant of .type unsupported by LLVM Assembler MIPS: jz4740: Fix surviving instance of irq_to_gpio()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - cxl: Fix PSL timebase synchronization detection from Frederic Barrat - Fix oops when destroying hw_breakpoint event from Ravi Bangoria - Avoid lbarx on e5500 from Scott Wood * tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/fsl-book3e: Avoid lbarx on e5500 powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event cxl: Fix PSL timebase synchronization detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "One I2C bugfix ensuring correct memory allocation in a driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: brcmstb: allocate correct amount of memory for regmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB driver ids for 4.5-rc7, and the removal of a driver we merged in 4.5-rc1 but it turns out it's not needed as the hardware is the same as a driver we already have in the tree. This was only figured out after doing a lot of cleanup on it, gotta love vendor-provided drivers... The new device ids for the devices for this driver will be added later on when testing is completed, but for now, we will remove the driver to keep people from accidentally cleaning it up. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: qcserial: add Sierra Wireless EM74xx device ID Revert "USB: serial: add Moxa UPORT 11x0 driver" USB: serial: option: add support for Quectel UC20 USB: serial: option: add support for Telit LE922 PID 0x1045 USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3) usb: chipidea: otg: change workqueue ci_otg as freezable
-
- 05 Mar, 2016 13 commits
-
-
Colin Ian King authored
static analysis from cppcheck detected %x being used for unsigned longs: [arch/x86/um/os-Linux/task_size.c:112]: (warning) %x in format string (no. 1) requires 'unsigned int' but the argument type is 'unsigned long'. Use %lx instead of %x Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Richard Weinberger authored
...modules are using this symbol. Export it like all other archs to. Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Richard Weinberger authored
Commit db2f24dc was plain wrong. I did not realize the we are allowed to loop here. In fact we have to loop and must not return to userspace before all SIGSEGVs have been delivered. Other archs do this directly in their entry code, UML does it here. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Richard Weinberger authored
ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Cc: stable@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "It's our tradition to get a high volume of fixes late at rc7: this time, X32 ABI breakage was found and this resulted in a high number LOCs. The necessary changes to ALSA core codes were fairly straightforward, and more importantly, they are specific to X32, thus should be safe to apply. Other than that, rather a collection of small fixes: - Removal of the code that blocks too long at closing the OSS sequencer client (which was spotted by syzkaller, unsurprisingly) - Fixes races at HD-audio HDMI i915 audio binding - a few HDSP/HDPM zero-division fixes - Quirks for HD-audio and USB-audio as usual" * tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - hdmi defer to register acomp eld notifier ALSA: hda - hdmi add wmb barrier for audio component ALSA: hda - Fix mic issues on Acer Aspire E1-472 ALSA: seq: oss: Don't drain at closing a client ALSA: usb-audio: Add a quirk for Plantronics DA45 ALSA: hdsp: Fix wrong boolean ctl value accesses ALSA: hdspm: Fix zero-division ALSA: hdspm: Fix wrong boolean ctl value accesses ALSA: timer: Fix ioctls for X32 ABI ALSA: timer: Fix broken compat timer user status ioctl ALSA: rawmidi: Fix ioctls X32 ABI ALSA: rawmidi: Use comapt_put_timespec() ALSA: pcm: Fix ioctls for X32 ABI ALSA: ctl: Fix ioctls for X32 ABI
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fix from Vinod Koul: "One minor fix on pxa driver to fix the cyclic dma tranfers" * tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pxa_dma: fix cyclic transfers
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - some last time changes before we stablize the new entity function integer numbers at uAPI - probe: fix erroneous return value on i2c/adp1653 driver - fix tx 5v detect regression on adv7604 driver - fix missing unlock on error in vpfe_prepare_pipeline() on davinci_vpfe driver * tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments [media] media.h: postpone connectors entities [media] media.h: use hex values for range offsets, move connectors base up. [media] adv7604: fix tx 5v detect regression [media] media.h: get rid of MEDIA_ENT_F_CONN_TEST [media] [for,v4.5] media.h: increase the spacing between function ranges [media] media: i2c/adp1653: probe: fix erroneous return value [media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvcimm fix from Dan Williams: "One straggling fix for NVDIMM support. The KVM/QEMU enabling for NVDIMMs has recently reached the point where it is able to accept some ACPI _DSM requests from a guest VM. However they immediately found that the 4.5-rc kernel is unusable because the kernel's 'nfit' driver fails to load upon seeing a valid "not supported" response from the virtual BIOS for an address range scrub command. It is not mandatory that a platform implement address range scrubbing, so this fix from Vishal properly treats the 'not supported' response as 'skip scrubbing and continue loading the driver'" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Continue init even if ARS commands are unimplemented
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two fairly simple fixes. One is a regression with ipr firmware loading caused by one of the trivial patches in the last merge window which failed to strip the \n from the file name string, so now the firmware loader no longer works leading to a lot of unhappy ipr users; fix by stripping the \n. The second is a memory leak within SCSI: the BLK_PREP_INVALID state was introduced a recent fix but we forgot to account for it correctly when freeing state, resulting in memory leakage. Add the correct state freeing in scsi_prep_return()" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ipr: Fix regression when loading firmware SCSI: Free resources when we return BLKPREP_INVALID
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Assorted fixes for libata drivers. - Turns out HDIO_GET_32BIT ioctl was subtly broken all along. - Recent update to ahci external port handling was incorrectly marking hotpluggable ports as external making userland handle devices connected to those ports incorrectly. - ahci_xgene needs its own irq handler to work around a hardware erratum. libahci updated to allow irq handler override. - Misc driver specific updates" * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci: don't mark HotPlugCapable Ports as external/removable ahci: Workaround for ThunderX Errata#22536 libata: Align ata_device's id on a cacheline Adding Intel Lewisburg device IDs for SATA pata-rb532-cf: get rid of the irq_to_gpio() call libata: fix HDIO_GET_32BIT ioctl ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT. ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci. libahci: Implement the capability to override the generic ahci interrupt handler.
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Round 2 of this. I cut back to the bare necessities, the patch is still larger than it usually would be at this time, due to the number of NVMe fixes in there. This pull request contains: - The 4 core fixes from Ming, that fix both problems with exceeding the virtual boundary limit in case of merging, and the gap checking for cloned bio's. - NVMe fixes from Keith and Christoph: - Regression on larger user commands, causing problems with reading log pages (for instance). This touches both NVMe, and the block core since that is now generally utilized also for these types of commands. - Hot removal fixes. - User exploitable issue with passthrough IO commands, if !length is given, causing us to fault on writing to the zero page. - Fix for a hang under error conditions - And finally, the current series regression for umount with cgroup writeback, where the final flush would happen async and hence open up window after umount where the device wasn't consistent. fsck right after umount would show this. From Tejun" * 'for-linus2' of git://git.kernel.dk/linux-block: block: support large requests in blk_rq_map_user_iov block: fix blk_rq_get_max_sectors for driver private requests nvme: fix max_segments integer truncation nvme: set queue limits for the admin queue writeback: flush inode cgroup wb switches instead of pinning super_block NVMe: Fix 0-length integrity payload NVMe: Don't allow unsupported flags NVMe: Move error handling to failed reset handler NVMe: Simplify device reset failure NVMe: Fix namespace removal deadlock NVMe: Use IDA for namespace disk naming NVMe: Don't unmap controller registers on reset block: merge: get the 1st and last bvec via helpers block: get the 1st and last bvec via helpers block: check virt boundary in bio_will_gap() block: bio: introduce helpers to get the 1st and last bvec
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "Additional 4.5-rc6 fixes. I have four patches today. I had previously thought I had submitted two of them last week, but they were accidentally skipped :-(. - One fix to an error path in the core - One fix for RoCE in the core - Two related fixes for the core/mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/core: Use GRH when the path hop-limit > 0 IB/{core, mlx5}: Fix input len in vendor part of create_qp/srq IB/mlx5: Avoid using user-index for SRQs IB/core: Fix missed clean call in registration path
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This contains one i915 patch twice, as I merged it locally for testing, and then pulled some stuff in on top, and then Jani sent to me, I didn't think it was worth redoing all the merges of what I had tested. Summary: - amdgpu/radeon fixes for some more power management and VM races. - Two i915 fixes, one for the a recent regression, one another power management fix for skylake. - Two tegra dma mask fixes for a regression. - One ast fix for a typo I made transcribing the userspace driver, that I'd like to get into stable so I don't forget about it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gpu: host1x: Set DMA ops on device creation gpu: host1x: Set DMA mask drm/amdgpu: return from atombios_dp_get_dpcd only when error drm/amdgpu/cz: remove commented out call to enable vce pg drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pg drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled drm/amdgpu/gfx8: specify which engine to wait before vm flush drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well drm/amd/powerplay: send event to notify powerplay all modules are initialized. drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu. drm/radeon/pm: update current crtc info after setting the powerstate drm/amdgpu/pm: update current crtc info after setting the powerstate drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM) drm/i915/skl: Fix power domain suspend sequence drm/ast: Fix incorrect register check for DRAM width drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
-