- 05 Mar, 2019 4 commits
-
-
Florian Fainelli authored
commit 8cad443e upstream. Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit f1e81ba8 which is commit 967d1dc1 upstream. It does not work properly in the 4.14.y tree and causes more problems than it fixes, so revert it. Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Reported-by:
Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit c1e63df4 which is commit 0a42e99b upstream. It does not work properly in the 4.14.y tree and causes more problems than it fixes, so revert it. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit d2762edc which is commit 628bd859 upstream. It does not work properly in the 4.14.y tree and causes more problems than it fixes, so revert it. Reported-by:
-
- 27 Feb, 2019 36 commits
-
-
Greg Kroah-Hartman authored
-
Russell King authored
commit 87454b6e upstream. During testing on Armada 388 platforms, it was found with a certain module configuration that it was possible to trigger a kernel oops during the module load process, caused by the phylink resolver being triggered for a currently disabled interface. This problem was introduced by changing the way the SFP registration works, which now can result in the sfp link down notification being called during phylink_create(). Fixes: b5bfc21a ("net: sfp: do not probe SFP module before we're attached") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Matthias Kaehlcke authored
commit a9903f04 upstream. The definition of sysctl_sched_migration_cost, sysctl_sched_nr_migrate and sysctl_sched_time_avg includes the attribute const_debug. This attribute is not part of the extern declaration of these variables in include/linux/sched/sysctl.h, while it is in kernel/sched/sched.h, and as a result Clang generates warnings like this: kernel/sched/sched.h:1618:33: warning: section attribute is specified on redeclared variable [-Wsection] extern const_debug unsigned int sysctl_sched_time_avg; ^ ./include/linux/sched/sysctl.h:42:21: note: previous declaration is here extern unsigned int sysctl_sched_time_avg; The header only declares the variables when CONFIG_SCHED_DEBUG is defined, therefore it is not necessary to duplicate the definition of const_debug. Instead we can use the attribute __read_mostly, which is the expansion of const_debug when CONFIG_SCHED_DEBUG=y is set. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Nick Desaulniers <nick.desaulniers@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shile Zhang <shile.zhang@nokia.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171030180816.170850-1-mka@chromium.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Colin Ian King authored
commit a0dd6773 upstream. The assignment of map to itself is redundant and can be removed. Detected with Coccinelle. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
commit 1f60652d upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion from enumeration type 'enum max77620_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] .param = MAX77620_ACTIVE_FPS_SOURCE, ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/139Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Eli Cooper authored
commit 15df03c6 upstream. Commit 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 753c111f upstream. Fetch pointer to module before target object is released. Fixes: 29e38801 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions") Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 23b7ca4f upstream. Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path. Fixes: cf9dc09d ("netfilter: nf_tables: fix missing rules flushing per table") Reported-by:
Phil Sutter <phil@nwl.cc> Acked-by:
-
Hangbin Liu authored
commit 278e2148 upstream. This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Reported-by:
Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Willem de Bruijn authored
commit 9e8db591 upstream. GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not. But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header. Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both. Exclude callers for which network header offset is not known. Fixes: d5be7f63 ("net: validate untrusted gso packets without csum offload") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
commit d5be7f63 upstream. Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap. If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set. GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header. Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Chris Wilson authored
commit d179b88d upstream. If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure. Fixes: 754a7659 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation") Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Alexey Brodkin authored
commit b6835ea7 upstream. The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdfSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC] Signed-off-by:
-
Eugeniy Paltsev authored
commit a66f2e57 upstream. Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by:
Corentin LABBE <clabbe@baylibre.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
commit 252f6e8e upstream. It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by:
-
Dmitry V. Levin authored
commit b7dc5a07 upstream. Commit 910cd32e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace. This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this: $ strace -a0 -ewrite -einject=write:error=enospc echo hello write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED) +++ exited with 1 +++ After commit 910cd32e it loops printing something like this instead: write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED) This bug was found by strace test suite. Fixes: 910cd32e ("parisc: Fix and enable seccomp filter support") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Tested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Eric Biggers authored
commit ede0fa98 upstream. syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df20 ("KEYS: Expand the capacity of a keyring") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Eric Biggers authored
commit cc1780fc upstream. Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 2aa349f6 ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccd ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
commit 48396e80 upstream. Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: <stable@vger.kernel.org> Fixes: 94a9174c ("IB/srp: reduce lock coverage of command completion") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 1ec17dbd ] Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits. Extension INET_DIAG_CLASS_ID has not way to request from the beginning. This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions. Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class. Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen). So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use. Fixes: 0888e372 ("net: inet: diag: expose sockets cgroup classid") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 29dded89 ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
-
Hangbin Liu authored
[ Upstream commit 173656ac ] If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: ca15a078 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 2fdeee25 ] The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track: LIST_HEAD(opt_inst_list); nla_for_each_nested(...) { list_for_each_entry(opt_inst, &team->option_inst_list, list) { if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst)) continue; list_add(&opt_inst->tmp_list, &opt_inst_list); } } team_nl_send_event_options_get(team, &opt_inst_list); as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check(). Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too. Fixes: 4fb0534f ("team: avoid adding twice the same option to the event list") Fixes: 2fcdb2c9 ("team: allow to send multiple set events in one message") Reported-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Reported-by: syzbot+68ee510075cf64260cc4@syzkaller.appspotmail.com Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit fc228abc ] Jianlin reported a panic when running sctp gso over gre over vlan device: [ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp] It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment(). For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start. So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment. Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Russell King authored
[ Upstream commit b5bfc21a ] When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by:
-
Kal Conley authored
[ Upstream commit fc62814d ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX. This change fixes support for packet ring buffers >= UINT_MAX. Fixes: 8f8d28e4 ("net/packet: fix overflow in check for tp_frame_nr") Signed-off-by:
Kal Conley <kal.conley@dectris.com> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 218d05ce ] In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6 ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
-
Li RongQing authored
[ Upstream commit d1f20798 ] genlmsg_reply can fail, so propagate its return code Fixes: 915d7e5e ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4ffcbfac ] KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 7afa81c5 ] A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tariq Toukan authored
[ Upstream commit 7fdc1adc ] For representors, the TX dropped counter is not folded from the per-ring counters. Fix it. Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 64254a20 ] The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning. Fix this by configuring static entries with ageing disabled and roaming enabled. In net-next we can add proper support for the newly introduced 'sticky' flag. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit f4924f24 ] In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt(). Fixes: 8c4b4c7e ("bpf: Add setsockopt helper function to bpf") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 248b5701 ] When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors. The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Cheng-Min Ao authored
[ Upstream commit f422449b ] Correct a typo in OF device ID table The last one should be 'ti,tmp442' Signed-off-by:
Cheng-Min Ao <tony_ao@wiwynn.com> Signed-off-by:
Yu-Hsiang Chen <matt_chen@wiwynn.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit cb12d72b ] Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long. Detected by cppcheck: (warning) Shifting signed 32-bit value by 31 bits is undefined behaviour Signed-off-by:
-
