- 26 Mar, 2021 27 commits
-
-
Eric Dumazet authored
Networking has many sysctls that could fit in one u8. This patch adds proc_dou8vec_minmax() for this purpose. Note that the .extra1 and .extra2 fields are pointing to integers, because it makes conversions easier. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Voon Weifeng says: ==================== net: stmmac: enable multi-vector MSI This patchset adds support for multi MSI interrupts in addition to current single common interrupt implementation. Each MSI interrupt is tied to a newly introduce interrupt service routine(ISR). Hence, each interrupt will only go through the corresponding ISR. In order to increase the efficiency, enabling multi MSI interrupt will automatically select the interrupt mode configuration INTM=1. When INTM=1, the TX/RX transfer complete signal will only asserted on corresponding sbd_perch_tx_intr_o[] or sbd_perch_rx_intr_o[] without asserting signal on the common sbd_intr_o. Hence, for each TX/RX interrupts, only the corresponding ISR will be triggered. Every vendor might have different MSI vector assignment. So, this patchset only includes multi-vector MSI assignment for Intel platform. Changes: v1 -> v2 patch 2/5 -Remove defensive check for invalid dev pointer ==================== Signed-off-by: -
Wong, Vee Khee authored
For interrupt mode INTM=0, TX/RX transfer complete will trigger signal not only on sbd_perch_[tx|rx]_intr_o (Transmit/Receive Per Channel) but also on the sbd_intr_o (Common). As for multi-MSI implementation, setting interrupt mode INTM=1 is more efficient as each TX intr and RX intr (TI/RI) will be handled by TX/RX ISR without the need of calling the common MAC ISR. Updated the TX/RX NORMAL interrupts status checking process as the NIS status bit is not asserted for any RI/TI events for INTM=1. Signed-off-by:
Wong, Vee Khee <vee.khee.wong@intel.com> Co-developed-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
-
Ong Boon Leong authored
Intel mgbe controller supports multi-vector interrupts: msi_rx_vec 0,2,4,6,8,10,12,14 msi_tx_vec 1,3,5,7,9,11,13,15 msi_sfty_ue_vec 26 msi_sfty_ce_vec 27 msi_lpi_vec 28 msi_mac_vec 29 During probe(), the driver will starts with request allocation for multi-vector interrupts. If it fails, then it will automatically fallback to request allocation for single interrupts. Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Co-developed-by:
-
Ong Boon Leong authored
Now we introduce MSI interrupt service routines and hook these routines up if stmmac_open() sees valid irq line being requested:- stmmac_mac_interrupt() :- MAC (dev->irq), WOL (wol_irq), LPI (lpi_irq) stmmac_safety_interrupt() :- Safety Feat Correctible Error (sfty_ce_irq) & Uncorrectible Error (sfty_ue_irq) stmmac_msi_intr_rx() :- For all RX MSI irq (rx_irq) stmmac_msi_intr_tx() :- For all TX MSI irq (tx_irq) Each of IRQs will have its unique name so that we can differentiate them easily under /proc/interrupts. Signed-off-by: -
Ong Boon Leong authored
Refactor stmmac_interrupt() by introducing stmmac_common_interrupt() so that we prepare the ISR operation to be friendly to MSI later. Signed-off-by:
-
Ong Boon Leong authored
In preparation to make stmmac support multi-vector MSI, we introduce the interrupt status masking according to RX, TX or RXTX. Default to use RXTX inside stmmac_dma_interrupt(), so there is no run-time logic difference now. Signed-off-by:
-
Dmitry Vyukov authored
netdev_unregister_timeout_secs=0 can lead to printing the "waiting for dev to become free" message every jiffy. This is too frequent and unnecessary. Set the min value to 1 second. Also fix the merge issue introduced by "net: make unregister netdev warning timeout configurable": it changed "refcnt != 1" to "refcnt". Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: update registers for other versions This series updates IPA and GSI register definitions to permit more versions of IPA hardware to be supported. Most of the updates are informational, updating comments to indicate which IPA versions support each register and field. But some registers are new and others are deprecated. In a few cases register fields are laid out differently, and in these cases the changes are a little more substantive. I won't claim the result is 100% correct, but it's close, and should allow all IPA versions 3.x through 4.x to be supported by the driver. ==================== Signed-off-by: -
Alex Elder authored
IPA v4.5 (GSI v2.5) supports a larger set of channel protocols, and adds an additional field to hold the most-significant bits of the protocol identifier on a channel. Add an inline function that encodes the protocol (including the extra bits for newer versions of IPA), and define some additional protocols. At this point we still use only GPI protocol. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Each GSI channel has a CNTXT_1 register that encodes the size of its ring buffer. The size of the field that records that is increased starting at IPA v4.9. Replace the use of a fixed-size field mask with a new inline function that encodes that size value. Similarly, the size of GSI event rings can be larger starting with IPA v4.9, so create a function to encode that as well. Signed-off-by:
-
Alex Elder authored
The main purpose of this is to extend these GSI register definitions to support additional IPA versions. This patch makes some minor updates to "gsi_reg.h": - Define a DB_IN_BYTES field in the channel QOS register - Add some comments clarifying when certain fields are valid - Add the definition of GSI_CH_DB_STOP channel command - Add a couple of blank lines - Move one comment and indent another - Delete two unused register definitions at the end. Signed-off-by:
-
Alex Elder authored
Starting with IPA v4.7, registers related to IPA interrupts are located at a fixed offset 0x1000 above than the addresses used for earlier versions. Define and use functions to provide the offset to use for these registers based on IPA version. Signed-off-by:
-
Alex Elder authored
IPA version 4.9 and later use a different layout of some fields found in the COMP_CFG register. Define arbitration_lock_disable_encoded(), and use it to encode a value into the ATOMIC_FETCHER_ARB_LOCK_DIS field based on the IPA version. And define full_flush_rsc_closure_en_encoded() to encode a value into the FULL_FLUSH_WAIT_RSC_CLOSE_EN field based on the IPA version. The values of these fields are neither modified nor extracted by current code, but this patch makes this possible for all supported versions. Fix a mistaken comment above ipa_hardware_config_comp() intended to describe the purpose for the register. Signed-off-by:
-
Alex Elder authored
Add and update IPA register definitions. Extend these definitions to incorporate a fairly small number of new symbols (register offsets and fields) to support IPA v3.0, v3.1, v3.5, v4.0, v4.1, v4.7, 4.9, and v4.11, and have the comments reflect when they are valid. None of the added symbols require changes elsewhere in the code. Update rsrc_grp_encoded() to support these other IPA versions. Add kerneldoc comments for the IPA IRQ numbers and sequencer type. Fix a few spots where the version check should be less restrictive (missed by an earlier patch). Signed-off-by:
-
Qiheng Lin authored
GCC reports the following warning with W=1: drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c:80:9: warning: variable 'count' set but not used [-Wunused-but-set-variable] 80 | int i, count; | ^~~~~ This variable is not used in function , this commit remove it to fix the warning. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Qiheng Lin <linqiheng@huawei.com> Signed-off-by:
-
Heiner Kallweit authored
We can simply use rtl_hw_start_8168c_2() also for chip version 21. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Qinglang Miao authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Qinglang Miao <miaoqinglang@huawei.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Daode Huang says: ==================== net: gve: make cleanup for gve This patch set replace deprecated strlcpy by strscpy, remove repeat word "allowed" in gve driver. for more details, please refer to each patch. ==================== Signed-off-by: -
Daode Huang authored
fix the WARNING of Possible repeated word: 'allowed' Signed-off-by:
Daode Huang <huangdaode@huawei.com> Reviewed-by:
Catherine Sullivan <csully@google.com> Signed-off-by:
-
Daode Huang authored
Usage of strlcpy in linux kernel has been recently deprecated[1], so convert gve driver to strscpy [1] https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL =V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by:
-
Lu Wei authored
Modify "accomodate" to "accommodate" in net/ipv4/esp4.c. Reported-by:
Lu Wei <luwei32@huawei.com> Signed-off-by:
-
Lu Wei authored
Modify "Apparantly" to "Apparently" in net/dsa/tag_rtl4_a.c.. Reported-by:
-
Lu Wei authored
Modify "erronous" to "erroneous" in net/decnet/dn_nsp_in.c. Reported-by:
-
Lu Wei authored
Modify "funciton" to "function" in net/core/dev_addr_lists.c. Reported-by:
-
Lu Wei authored
Modify "inital" to "initial" in net/ceph/osdmap.c. Reported-by:
-
Wan Jiabing authored
struct sk_buff has been declared. Remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
- 25 Mar, 2021 13 commits
-
-
Zheng Yongjun authored
Remove including <linux/version.h> that don't need it. Reported-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by:
-
Zheng Yongjun authored
Remove including <linux/version.h> that don't need it. Reported-by:
-
Lu Wei authored
s/addres/address Reported-by:
-
Zheng Yongjun authored
Remove including <linux/version.h> that don't need it. Reported-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
-
Hoang Le authored
Add extack error messages for -EINVAL errors when enabling bearer, getting/setting properties for a media/bearer Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: clarify the ethtool FEC interface Our FEC configuration interface is one of the more confusing. It also lacks any error checking in the core. This certainly shows in the varying implementations across the drivers. Improve the documentation and add most basic checks. Sadly, it's probably too late now to try to enforce much more uniformity. Any thoughts & suggestions welcome. Next step is to add netlink for FEC, then stats. ==================== Signed-off-by: -
Jakub Kicinski authored
The definition of the FEC driver interface is quite unclear. Improve the documentation. This is based on current driver and user space code, as well as the discussions about the interface: RFC v1 (24 Oct 2016): https://lore.kernel.org/netdev/1477363849-36517-1-git-send-email-vidya@cumulusnetworks.com/ - this version has the autoneg field - no active_fec field - none vs off confusion is already present RFC v2 (10 Feb 2017): https://lore.kernel.org/netdev/1486727004-11316-1-git-send-email-vidya@cumulusnetworks.com/ - autoneg removed - active_fec added v1 (10 Feb 2017): https://lore.kernel.org/netdev/1486751311-42019-1-git-send-email-vidya@cumulusnetworks.com/ - no changes in the code v1 (24 Jun 2017): https://lore.kernel.org/netdev/1498331985-8525-1-git-send-email-roopa@cumulusnetworks.com/ - include in tree user v2 (27 Jul 2017): https://lore.kernel.org/netdev/1501199248-24695-1-git-send-email-roopa@cumulusnetworks.com/Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Reject NONE on set, this mode means device does not support FEC so it's a little out of place in the set interface. This should be safe to do - user space ethtool does not allow the use of NONE on set. A few drivers treat it the same as OFF, but none use it instead of OFF. Similarly reject an empty FEC mask. The common user space tool will not send such requests and most drivers correctly reject it already. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
struct ethtool_fecparam::active_fec is a GET-only field, all in-tree drivers correctly ignore it on SET. Clear the field on SET to avoid any confusion. Again, we can't reject non-zero now since ethtool user space does not zero-init the param correctly. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jakub Kicinski authored
struct ethtool_fecparam::reserved is never looked at by the core. Make sure it's actually 0. Unfortunately we can't return an error because old ethtool doesn't zero-initialize the structure for SET. On GET we can be more verbose, there are no in tree (ab)users. Fix up the kdoc on the structure. Remove the mention of FEC bypass. Seems like a niche thing to configure in the first place. Signed-off-by:
-
Jakub Kicinski authored
Digging through the mailing list archive @autoneg was part of the first version of the RFC, this left over comment was pointed out twice in review but wasn't removed. The sentence is an exact copy-paste from pauseparam. Signed-off-by:
-
Jakub Kicinski authored
s/porte/the port/ Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by:
-
