The arm64 signal tests generate warnings during build since both they and
the toplevel lib.mk define a clean target:

Makefile:25: warning: overriding recipe for target 'clean'
../../lib.mk:126: warning: ignoring old recipe for target 'clean'

Since the inclusion of lib.mk is in the signal Makefile there is no
situation where this warning could be avoided so just remove the redundant
clean target.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200624104933.21125-1-broonie@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on Cortex-A55
and are meltdown safe, hence add them to kpti_safe_list[].
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200624123406.3472-1-saiprakash.ranjan@codeaurora.orgSigned-off-by: Will Deacon <will@kernel.org>

Some ftrace features are broken since commit 714a8d02 ("arm64: asm:
Override SYM_FUNC_START when building the kernel with BTI"). For example
the function_graph tracer:

$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
[   36.107016] WARNING: CPU: 0 PID: 115 at kernel/trace/ftrace.c:2691 ftrace_modify_all_code+0xc8/0x14c

When ftrace_modify_graph_caller() attempts to write a branch at
ftrace_graph_call, it finds the "BTI J" instruction inserted by
SYM_INNER_LABEL() instead of a NOP, and aborts.

It turns out we don't currently need the BTI landing pads inserted by
SYM_INNER_LABEL:

* ftrace_call and ftrace_graph_call are only used for runtime patching
  of the active tracer. The patched code is not reached from a branch.
* install_el2_stub is reached from a CBZ instruction, which doesn't
  change PSTATE.BTYPE.
* __guest_exit is reached from B instructions in the hyp-entry vectors,
  which aren't subject to BTI checks either.

Remove the BTI annotation from SYM_INNER_LABEL.

Fixes: 714a8d02 ("arm64: asm: Override SYM_FUNC_START when building the kernel with BTI")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200624112253.1602786-1-jean-philippe@linaro.orgSigned-off-by: Will Deacon <will@kernel.org>

Don't use gcc plugins for building arch/arm64/kernel/vdso/vgettimeofday.c
to avoid unneeded instrumentation.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Link: https://lore.kernel.org/r/20200624123330.83226-4-alex.popov@linux.comSigned-off-by: Will Deacon <will@kernel.org>

Commit 87676cfc ("arm64: vdso: Disable dwarf unwinding through the
sigreturn trampoline") unconditionally passes the '--no-eh-frame-hdr'
option to the linker when building the native vDSO in an attempt to
prevent generation of the .eh_frame_hdr section, the presence of which
has been implicated in segfaults originating from the libgcc unwinder.

Unfortunately, not all versions of binutils support this option, which
has been shown to cause build failures in linux-next:

  |   CALL    scripts/atomic/check-atomics.sh
  |   CALL    scripts/checksyscalls.sh
  |   LD      arch/arm64/kernel/vdso/vdso.so.dbg
  | ld: unrecognized option '--no-eh-frame-hdr'
  | ld: use the --help option for usage information
  | arch/arm64/kernel/vdso/Makefile:64: recipe for target
  | 'arch/arm64/kernel/vdso/vdso.so.dbg' failed
  | make[1]: *** [arch/arm64/kernel/vdso/vdso.so.dbg] Error 1
  | arch/arm64/Makefile:175: recipe for target 'vdso_prepare' failed
  | make: *** [vdso_prepare] Error 2

Only link the vDSO with '--no-eh-frame-hdr' when the linker supports it.
If we end up with the section due to linker defaults, the absence of CFI
information in the sigreturn trampoline will prevent the unwinder from
breaking.

Link: https://lore.kernel.org/r/7a7e31a8-9a7b-2428-ad83-2264f20bdc2d@hisilicon.com
Fixes: 87676cfc ("arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline")
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>

Versions of binutils prior to 2.33.1 don't understand the ELF notes that
are added by modern compilers to indicate the PAC and BTI options used
to build the code. This causes them to emit large numbers of warnings in
the form:

aarch64-linux-gnu-nm: warning: .tmp_vmlinux.kallsyms2: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000

during the kernel build which is currently causing quite a bit of
disruption for automated build testing using clang.

In commit 15cd0e67 (arm64: Kconfig: ptrauth: Add binutils version
check to fix mismatch) we added a dependency on binutils to avoid this
issue when building with versions of GCC that emit the notes but did not
do so for clang as it was believed that the existing check for
.cfi_negate_ra_state was already requiring a new enough binutils. This
does not appear to be the case for some versions of binutils (eg, the
binutils in Debian 10) so instead refactor so we require a new enough
GNU binutils in all cases other than when we are using an old GCC
version that does not emit notes.

Other, more exotic, combinations of tools are possible such as using
clang, lld and gas together are possible and may have further problems
but rather than adding further version checks it looks like the most
robust thing will be to just test that we can build cleanly with the
configured tools but that will require more review and discussion so do
this for now to address the immediate problem disrupting build testing.
Reported-by: KernelCI <bot@kernelci.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1054
Link: https://lore.kernel.org/r/20200619123550.48098-1-broonie@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

The sigreturn code in the compat vDSO is unused. Remove it.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

The 32-bit sigreturn trampoline in the compat sigpage matches the binary
representation of the arch/arm/ sigpage exactly. This is important for
debuggers (e.g. GDB) and unwinders (e.g. libunwind) since they rely
on matching the instruction sequence in order to identify that they are
unwinding through a signal. The same cannot be said for the sigreturn
trampoline in the compat vDSO, which defeats the unwinder heuristics and
instead attempts to use unwind directives for the unwinding. This is in
contrast to arch/arm/, which never uses the vDSO for sigreturn.

Ensure compatibility with arch/arm/ and existing unwinders by always
using the sigpage for the sigreturn trampoline, regardless of the
presence of the compat vDSO.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

In preparation for removing the signal trampoline from the compat vDSO,
allow the sigpage and the compat vDSO to co-exist.

For the moment the vDSO signal trampoline will still be used when built.
Subsequent patches will move to the sigpage consistently.
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Commit 7e9f5e66 ("arm64: vdso: Add --eh-frame-hdr to ldflags") results
in a .eh_frame_hdr section for the vDSO, which in turn causes the libgcc
unwinder to unwind out of signal handlers using the .eh_frame information
populated by our .cfi directives. In conjunction with a4eb355a
("arm64: vdso: Fix CFI directives in sigreturn trampoline"), this has
been shown to cause segmentation faults originating from within the
unwinder during thread cancellation:

 | Thread 14 "virtio-net-rx" received signal SIGSEGV, Segmentation fault.
 | 0x0000000000435e24 in uw_frame_state_for ()
 | (gdb) bt
 | #0  0x0000000000435e24 in uw_frame_state_for ()
 | #1  0x0000000000436e88 in _Unwind_ForcedUnwind_Phase2 ()
 | #2  0x00000000004374d8 in _Unwind_ForcedUnwind ()
 | #3  0x0000000000428400 in __pthread_unwind (buf=<optimized out>) at unwind.c:121
 | #4  0x0000000000429808 in __do_cancel () at ./pthreadP.h:304
 | #5  sigcancel_handler (sig=32, si=0xffff33c743f0, ctx=<optimized out>) at nptl-init.c:200
 | #6  sigcancel_handler (sig=<optimized out>, si=0xffff33c743f0, ctx=<optimized out>) at nptl-init.c:165
 | #7  <signal handler called>
 | #8  futex_wait_cancelable (private=0, expected=0, futex_word=0x3890b708) at ../sysdeps/unix/sysv/linux/futex-internal.h:88

After considerable bashing of heads, it appears that our CFI directives
for unwinding out of the sigreturn trampoline are only processed by libgcc
when both a .eh_frame_hdr section is present *and* the mysterious NOP is
covered by an entry in .eh_frame. With both of these now in place, it has
highlighted that our CFI directives are not comprehensive enough to
restore the stack pointer of the interrupted context. This results in libgcc
falling back to an arm64-specific unwinder after computing a bogus PC value
from the unwind tables. The unwinder promptly dereferences this bogus address
in an attempt to see if the pointed-to instruction sequence looks like
the sigreturn trampoline.

Restore the old unwind behaviour, which relied solely on heuristics in
the unwinder, by removing the .eh_frame_hdr section from the vDSO and
commenting out the insufficient CFI directives for now. Add comments to
explain the current, miserable state of affairs.

Cc: Tamas Zsoldos <tamas.zsoldos@arm.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.

Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.

(Fixes tag identifies the introduction of unprivileged memory accesses,
 which exposed this latent bug in the hw_breakpoint code)

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Fixes: 57f4959b ("arm64: kernel: Add support for User Access Override")
Reported-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200617213407.GA1385@embeddedorSigned-off-by: Will Deacon <will@kernel.org>

hugetlb_cma_reserve() is called at the wrong place. numa_init has not been
done yet. so all reserved memory will be located at node0.

Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200617215828.25296-1-song.bao.hua@hisilicon.comSigned-off-by: Will Deacon <will@kernel.org>

Unfortunately, most versions of clang that support BTI are capable of
miscompiling the kernel when converting a switch statement into a jump
table. As an example, attempting to spawn a KVM guest results in a panic:

[   56.253312] Kernel panic - not syncing: bad mode
[   56.253834] CPU: 0 PID: 279 Comm: lkvm Not tainted 5.8.0-rc1 #2
[   56.254225] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[   56.254712] Call trace:
[   56.254952]  dump_backtrace+0x0/0x1d4
[   56.255305]  show_stack+0x1c/0x28
[   56.255647]  dump_stack+0xc4/0x128
[   56.255905]  panic+0x16c/0x35c
[   56.256146]  bad_el0_sync+0x0/0x58
[   56.256403]  el1_sync_handler+0xb4/0xe0
[   56.256674]  el1_sync+0x7c/0x100
[   56.256928]  kvm_vm_ioctl_check_extension_generic+0x74/0x98
[   56.257286]  __arm64_sys_ioctl+0x94/0xcc
[   56.257569]  el0_svc_common+0x9c/0x150
[   56.257836]  do_el0_svc+0x84/0x90
[   56.258083]  el0_sync_handler+0xf8/0x298
[   56.258361]  el0_sync+0x158/0x180

This is because the switch in kvm_vm_ioctl_check_extension_generic()
is executed as an indirect branch to tail-call through a jump table:

ffff800010032dc8:       3869694c        ldrb    w12, [x10, x9]
ffff800010032dcc:       8b0c096b        add     x11, x11, x12, lsl #2
ffff800010032dd0:       d61f0160        br      x11

However, where the target case uses the stack, the landing pad is elided
due to the presence of a paciasp instruction:

ffff800010032e14:       d503233f        paciasp
ffff800010032e18:       a9bf7bfd        stp     x29, x30, [sp, #-16]!
ffff800010032e1c:       910003fd        mov     x29, sp
ffff800010032e20:       aa0803e0        mov     x0, x8
ffff800010032e24:       940017c0        bl      ffff800010038d24 <kvm_vm_ioctl_check_extension>
ffff800010032e28:       93407c00        sxtw    x0, w0
ffff800010032e2c:       a8c17bfd        ldp     x29, x30, [sp], #16
ffff800010032e30:       d50323bf        autiasp
ffff800010032e34:       d65f03c0        ret

Unfortunately, this results in a fatal exception because paciasp is
compatible only with branch-and-link (call) instructions and not simple
indirect branches.

A fix is being merged into Clang 10.0.1 so that a 'bti j' instruction is
emitted as an explicit landing pad in this situation. Make in-kernel
BTI depend on that compiler version when building with clang.

Cc: Tom Stellard <tstellar@redhat.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20200615105524.GA2694@willie-the-truck
Link: https://lore.kernel.org/r/20200616183630.2445-1-will@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

When I squashed the 'allnoconfig' compiler warning about the
set_sve_default_vl() function being defined but not used in commit
1e570f51 ("arm64/sve: Eliminate data races on sve_default_vl"), I
accidentally broke the build for configs where ARM64_SVE is enabled, but
SYSCTL is not.

Fix this by only compiling the SVE sysctl support if both CONFIG_SVE=y
and CONFIG_SYSCTL=y.

Cc: Dave Martin <Dave.Martin@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200616131808.GA1040@lca.pwSigned-off-by: Will Deacon <will@kernel.org>

Commit cca98e9f ("mm: enforce that vmap can't map pages executable")
introduced 'pgprot_nx(prot)' for arm64 but collided silently with the
BTI support during the merge window, which endeavours to clear the GP
bit for non-executable kernel mappings in set_memory_nx().

For consistency between the two APIs, clear the GP bit in pgprot_nx().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200615154642.3579-1-will@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

KASAN sw tagging sets a random tag of 8 bits in the top byte of the pointer
returned by the memory allocating functions. So for the functions unaware
of this change, the top 8 bits of the address must be reset which is done
by the function arch_kasan_reset_tag().
Signed-off-by: Shyam Thombre <sthombre@codeaurora.org>
Link: https://lore.kernel.org/r/1591787384-5823-1-git-send-email-sthombre@codeaurora.orgSigned-off-by: Will Deacon <will@kernel.org>

When panicing due to an unknown/unhandled exception at EL1, dump the
registers of the faulting context so that it's easier to figure out
what went wrong. In particular, this makes it a lot easier to debug
in-kernel BTI failures since it pretty-prints PSTATE.BTYPE in the crash
log.

Cc: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200615113458.2884-1-will@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

sve_default_vl can be modified via the /proc/sys/abi/sve_default_vl
sysctl concurrently with use, and modified concurrently by multiple
threads.

Adding a lock for this seems overkill, and I don't want to think any
more than necessary, so just define wrappers using READ_ONCE()/
WRITE_ONCE().

This will avoid the possibility of torn accesses and repeated loads
and stores.

There's no evidence yet that this is going wrong in practice: this
is just hygiene.  For generic sysctl users, it would be better to
build this kind of thing into the sysctl common code somehow.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/1591808590-20210-3-git-send-email-Dave.Martin@arm.com
[will: move set_sve_default_vl() inside #ifdef to squash allnoconfig warning]
Signed-off-by: Will Deacon <will@kernel.org>

sve.rst describes a flag PR_SVE_SET_VL_INHERIT for the
PR_SVE_SET_VL prctl, but there is no flag of this name.  The flag
is shared between the _GET and _SET calls, so the _SET prefix was
dropped, giving the name PR_SVE_VL_INHERIT in the headers.

Fix it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/1591808590-20210-2-git-send-email-Dave.Martin@arm.comSigned-off-by: Will Deacon <will@kernel.org>

TEXT_OFFSET was recently changed to 0x0, in preparation for its removal
at a later stage, and a warning is emitted into the kernel log when the
bootloader appears to have failed to take the TEXT_OFFSET image header
value into account.

Ironically, this warning itself fails to take TEXT_OFFSET into account,
and compares the kernel image's alignment modulo 2M against a hardcoded
value of 0x0, and so the warning will trigger spuriously when TEXT_OFFSET
randomization is enabled.

Given the intent to get rid of TEXT_OFFSET entirely, let's fix this
oversight by just removing support for TEXT_OFFSET randomization.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200615101939.634391-1-ardb@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Pull SafeSetID update from Micah Morton:
 "Add additional LSM hooks for SafeSetID

  SafeSetID is capable of making allow/deny decisions for set*uid calls
  on a system, and we want to add similar functionality for set*gid
  calls.

  The work to do that is not yet complete, so probably won't make it in
  for v5.8, but we are looking to get this simple patch in for v5.8
  since we have it ready.

  We are planning on the rest of the work for extending the SafeSetID
  LSM being merged during the v5.9 merge window"

* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
  security: Add LSM hooks to set*gid syscalls

The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>

Pull btrfs updates from David Sterba:
 "This reverts the direct io port to iomap infrastructure of btrfs
  merged in the first pull request. We found problems in invalidate page
  that don't seem to be fixable as regressions or without changing iomap
  code that would not affect other filesystems.

  There are four reverts in total, but three of them are followup
  cleanups needed to revert a43a67a2 cleanly. The result is the
  buffer head based implementation of direct io.

  Reverts are not great, but under current circumstances I don't see
  better options"

* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: switch to iomap_dio_rw() for dio"
  Revert "fs: remove dio_end_io()"
  Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
  Revert "btrfs: split btrfs_direct_IO to read and write part"

Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...

This reverts commit a43a67a2.

This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.

The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.

Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.

There have been discussions how to fix that, but revert seems to be the
least intrusive option.

Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-06-12

The following pull-request contains BPF updates for your *net* tree.

We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).

The main changes are:

1) sock_hash accounting fix, from Andrey.

2) libbpf fix and probe_mem sanitizing, from Andrii.

3) sock_hash fixes, from Jakub.

4) devmap_val fix, from Jesper.

5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more cifs updates from Steve French:
 "12 cifs/smb3 fixes, 2 for stable.

   - add support for idsfromsid on create and chgrp/chown allowing
     ability to save owner information more naturally for some workloads

   - improve query info (getattr) when SMB3.1.1 posix extensions are
     negotiated by using new query info level"

* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add debug message for new file creation with idsfromsid mount option
  cifs: fix chown and chgrp when idsfromsid mount option enabled
  smb3: allow uid and gid owners to be set on create with idsfromsid mount option
  smb311: Add tracepoints for new compound posix query info
  smb311: add support for using info level for posix extensions query
  smb311: Add support for lookup with posix extensions query info
  smb311: Add support for SMB311 query info (non-compounded)
  SMB311: Add support for query info using posix extensions (level 100)
  smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
  smb3: fix typo in mount options displayed in /proc/mounts
  cifs: Add get_security_type_str function to return sec type.
  smb3: extend fscache mount volume coherency check

Let's keep "git status" happy and quiet.

Fixes: 9762dc14 ("samples: add binderfs sample program
Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.

See commit a7f7f624 ("treewide: replace '---help---' in Kconfig
files with 'help'")

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues

Pull more SCSI updates from James Bottomley:
 "This is the set of changes collected since just before the merge
  window opened. It's mostly minor fixes in drivers.

  The one non-driver set is the three optical disk (sr) changes where
  two are error path fixes and one is a helper conversion.

  The big driver change is the hpsa compat_alloc_userspace rework by Al
  so he can kill the remaining user. This has been tested and acked by
  the maintainer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
  scsi: acornscsi: Fix an error handling path in acornscsi_probe()
  scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
  scsi: cxlflash: Remove an unnecessary NULL check
  scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
  scsi: sr: Fix sr_probe() missing deallocate of device minor
  scsi: sr: Fix sr_probe() missing mutex_destroy
  scsi: st: Convert convert get_user_pages() --> pin_user_pages()
  scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
  scsi: target: Fix NULL pointer dereference
  scsi: target: Initialize LUN in transport_init_se_cmd()
  scsi: target: Factor out a new helper, target_cmd_init_cdb()
  scsi: hpsa: hpsa_ioctl(): Tidy up a bit
  scsi: hpsa: Get rid of compat_alloc_user_space()
  scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
  scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
  scsi: ufs: Remove redundant urgent_bkop_lvl initialization
  scsi: ufs: Don't update urgent bkops level when toggling auto bkops
  scsi: qedf: Remove redundant initialization of variable rc
  scsi: mpt3sas: Fix memset() in non-RDPQ mode
  scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has quite some patches for you this time. I hope it is the move to
  per-driver-maintainers which is now showing results. We will see.

  The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
  larger refactoring of the Designware, Tegra, and PXA drivers, the
  Cadence driver supports being a slave now, and there is support to
  instanciate SPD eeproms for well-known cases (which will be
  user-visible because the i801 driver supports it), and some
  devm_platform_ioremap_resource() conversions which blow up the
  diffstat.

  Note that I applied the Nuvoton driver quite late, so some minor fixup
  patches arrived during the merge window. I chose to apply them right
  away because they were trivial"

* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
  i2c: Drop stray comma in MODULE_AUTHOR statements
  i2c: npcm7xx: npcm_i2caddr[] can be static
  MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
  i2c: npcm7xx: Fix a couple of error codes in probe
  i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
  i2c: npcm7xx: Remove unnecessary parentheses
  i2c: npcm7xx: Add support for slave mode for Nuvoton
  i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
  dt-bindings: i2c: npcm7xx: add NPCM I2C controller
  i2c: pxa: don't error out if there's no pinctrl
  i2c: add 'single-master' property to generic bindings
  i2c: designware: Add Baikal-T1 System I2C support
  i2c: designware: Move reg-space remapping into a dedicated function
  i2c: designware: Retrieve quirk flags as early as possible
  i2c: designware: Convert driver to using regmap API
  i2c: designware: Discard Cherry Trail model flag
  i2c: designware: Add Baytrail sem config DW I2C platform dependency
  i2c: designware: slave: Set DW I2C core module dependency
  i2c: designware: Use `-y` to build multi-object modules
  dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
  ...

Pull more media updates from Mauro Carvalho Chehab:

 - a set of atomisp patches. They remove several abstraction layers, and
   fixes clang and gcc warnings (that were hidden via some macros that
   were disabling 4 or 5 types of warnings there). There are also some
   important fixes and sensor auto-detection on newer BIOSes via ACPI
   _DCM tables.

 - some fixes

* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
  media: rkvdec: Fix H264 scaling list order
  media: v4l2-ctrls: Unset correct HEVC loop filter flag
  media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
  media: v4l2-subdev.rst: correct information about v4l2 events
  media: s5p-mfc: Properly handle dma_parms for the allocated devices
  media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
  media: cedrus: Implement runtime PM
  media: cedrus: Program output format during each run
  media: atomisp: improve ACPI/DMI detection logs
  media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
  media: Revert "media: atomisp: Add some ACPI detection info"
  media: atomisp: improve sensor detection code to use _DSM table
  media: atomisp: get rid of an iomem abstraction layer
  media: atomisp: get rid of a string_support.h abstraction layer
  media: atomisp: use strscpy() instead of less secure variants
  media: atomisp: set DFS to MAX if sensor doesn't report fps
  media: atomisp: use different dfs failed messages
  media: atomisp: change the detection of ISP2401 at runtime
  media: atomisp: use macros from intel-family.h
  media: atomisp: don't set hpll_freq twice with different values
  ...

Pull libnvdimm updates from Dan Williams:
 "Small collection of cleanups to rework usage of ->queuedata and the
  GUID api"

* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: stop using ->queuedata
  nvdimm/btt: stop using ->queuedata
  nvdimm/blk: stop using ->queuedata
  libnvdimm: Replace guid_copy() with import_guid() where it makes sense

Let's keep "git status" happy and quiet.

Fixes: f5b5a164 ("Add sample notification program")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>