Pull fbdev fixes from Tomi Valkeinen:
 "Minor fbdev fixes for 3.14"

* tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.
  video: exynos: Fix S6E8AX0 LCD driver build error
  OMAPDSS: fix fck field types
  OMAPDSS: DISPC: decimation rounding fix

Pull block IO fixes from Jens Axboe:
 "Second round of updates and fixes for 3.14-rc2.  Most of this stuff
  has been queued up for a while.  The notable exception is the blk-mq
  changes, which are naturally a bit more in flux still.

  The pull request contains:

   - Two bug fixes for the new immutable vecs, causing crashes with raid
     or swap.  From Kent.

   - Various blk-mq tweaks and fixes from Christoph.  A fix for
     integrity bio's from Nic.

   - A few bcache fixes from Kent and Darrick Wong.

   - xen-blk{front,back} fixes from David Vrabel, Matt Rushton, Nicolas
     Swenson, and Roger Pau Monne.

   - Fix for a vec miscount with integrity vectors from Martin.

   - Minor annotations or fixes from Masanari Iida and Rashika Kheria.

   - Tweak to null_blk to do more normal FIFO processing of requests
     from Shlomo Pongratz.

   - Elevator switching bypass fix from Tejun.

   - Softlockup in blkdev_issue_discard() fix when !CONFIG_PREEMPT from
     me"

* 'for-linus' of git://git.kernel.dk/linux-block: (31 commits)
  block: add cond_resched() to potentially long running ioctl discard loop
  xen-blkback: init persistent_purge_work work_struct
  blk-mq: pair blk_mq_start_request / blk_mq_requeue_request
  blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq
  block: Fix cloning of discard/write same bios
  block: Fix type mismatch in ssize_t_blk_mq_tag_sysfs_show
  blk-mq: rework flush sequencing logic
  null_blk: use blk_complete_request and blk_mq_complete_request
  virtio_blk: use blk_mq_complete_request
  blk-mq: rework I/O completions
  fs: Add prototype declaration to appropriate header file include/linux/bio.h
  fs: Mark function as static in fs/bio-integrity.c
  block/null_blk: Fix completion processing from LIFO to FIFO
  block: Explicitly handle discard/write same segments
  block: Fix nr_vecs for inline integrity vectors
  blk-mq: Add bio_integrity setup to blk_mq_make_request
  blk-mq: initialize sg_reserved_size
  blk-mq: handle dma_drain_size
  blk-mq: divert __blk_put_request for MQ ops
  blk-mq: support at_head inserations for blk_execute_rq
  ...

Pull sound fixes from Takashi Iwai:
 "Again only fixes for HD-audio:
   - regression fixes due to the modularization
   - a few fixups for Dell, Sony and HP laptops
   - a revert of the previous fix as it leads to another regression"

* tag 'sound-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X"
  ALSA: hda - Fix undefined symbol due to builtin/module mixup
  ALSA: hda - Fix mic capture on Sony VAIO Pro 11
  ALSA: hda - Add a headset quirk for Dell XPS 13
  ALSA: hda - Fix inconsistent Mic mute LED
  ALSA: hda - Fix leftover ifdef checks after modularization

Pull RDMA/InfiniBand fixes from Roland Dreier:

 - Fix some rough edges from the "IP addressing for IBoE" merge

 - Other misc fixes, mostly to hardware drivers

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits)
  RDMA/ocrdma: Fix load time panic during GID table init
  RDMA/ocrdma: Fix traffic class shift
  IB/iser: Fix use after free in iser_snd_completion()
  IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection
  IB/usnic: Fix smatch endianness error
  IB/mlx5: Remove dependency on X86
  mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use
  IB/qib: Add missing serdes init sequence
  RDMA/cxgb4: Add missing neigh_release in LE-Workaround path
  IB: Report using RoCE IP based gids in port caps
  IB/mlx4: Build the port IBoE GID table properly under bonding
  IB/mlx4: Do IBoE GID table resets per-port
  IB/mlx4: Do IBoE locking earlier when initializing the GID table
  IB/mlx4: Move rtnl locking to the right place
  IB/mlx4: Make sure GID index 0 is always occupied
  IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device
  RDMA/amso1100: Fix error return code
  RDMA/nes: Fix error return code
  IB/mlx5: Don't set "block multicast loopback" capability
  IB/mlx5: Fix binary compatibility with libmlx5
  ...

Pull hwmon fix from Guenter Roeck:
 "Fix arithmetic overflow in ntc_thermistor driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ntc_thermistor) Avoid math overflow

Pull battery fixes from Dmitry Eremin-Solenikov:

 - Fix NULL pointer dereference in max17040 driver

 - Add bq2415x dts bindings documentation

 - Fix misleading comment in ds2782 driver

 - Remove useless check in isp1704 charger driver.

* tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6:
  power: max17040: Fix NULL pointer dereference when there is no platform_data
  dt: binding documentation for bq2415x charger
  isp1704_charger: remove useless check in isp1704_charger_probe()
  power: ds2782_battery: Typo in comment

Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', 'ocrdma', 'qib' and 'usnic' into for-next

We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev()
when building the GID table for a vlan interface.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Use correct value for obtaining traffic class from device
response for Query QP request.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

We use "tx_desc" again after we free it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Fix a possible NULL pointer dereference in disconnection flow. This
can happen if the target disconnected/rejected the connection request,
e.g before the binding stage between iscsi connection to the transport
connection.
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2

Fix short to int cast for big endian systems.
Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Without that patch, a user can't select the imxfb driver when the i.MX25
and/or the i.MX27 device tree board are selected and that no boards that
selects IMX_HAVE_PLATFORM_IMX_FB are compiled in.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver.
Else we get the following errors due to missing symbols:
drivers/built-in.o: In function `s6e8ax0_probe':
:(.text+0x51aec): undefined reference to `lcd_device_register'
:(.text+0x51c44): undefined reference to `lcd_device_unregister'
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is
no such dependency in reality.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>

On some architectures (for example, arm), we don't end up indirectly
pulling in the declaration of kzalloc() and kfree(), and so building
anything that includes <linux/mlx5/driver.h> breaks.  Fix this by adding
an explicit include to get the declaration.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

The ntc thermistor code was doing math whose temporary result might
have overflowed 32-bits.  We need some casts in there to make it safe.

In one example I found:
- pullup_uV: 1800000
- result of iio_read_channel_raw: 3226
- 1800000 * 3226 => 0x15a1cbc80
Signed-off-by: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Research has shown that commit a77fcf89 ("IB/qib: Use a single
txselect module parameter for serdes tuning") missed a key serdes init
sequence.

This patch add that sequence.

Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

For userspace RoCE UD QPs we need to know the GID format that the
kernel uses, e.g when working over older kernels. For that end, add a
new port capability IB_PORT_IP_BASED_GIDS and report it when query
port is issued.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

When scanning netdevices we need to check a few more conditions and
cases to build the IBoE GID table properly.  For example, under
bonding we must make sure that when a port is down, the bond IP
address isn't programmed as a GID, since doing so will cause failure
with IB core flows that selects ports by GID.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

The IBoE code used to reset the GID table did it for all Ethernet
ports of the device.  Since the whole architecture of generating GIDs
and responding to events is port-based, this is inefficient and can
lead to wrong content in the GID table.  Change the reset flow to be
per-port.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Updating the GID table under IBoE requires read/write from/to shared
data structures.  These data structures are protected with the device
iboe lock.  The flows that modify the GID table start from

    1. Initializing the GID table
    2. NETDEV events
    3. INET or INET6 events

This patch makes sure that the flow of initializing the GID table is
consistent with the other two flows w.r.t on what step the lock is taken.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

On the one hand, the invocation of netdev_master_upper_dev_get()
within mlx4_ib_scan_netdevs() must be done with rtnl lock held.  On
the other hand, it's wrong to call rtnl_lock() from within this
function since it's also called by our netdev notifier callback.
Therefore move the locking to mlx4_ib_add() so that both cases are
covered.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Make sure that for Ethernet ports, the port GID table index 0 is always
occupied with a default GID of the relevant IPv6 link-local adderss.

This provides better user experience for legacy applications that don't use
the RDMA CM and were working on index 0 prior to the IP addressing change.

Also, as GIDs are generated from IP addresses of the network devices that
are associated with the port, it's basically possible that the GID table
will be empty if no IP address was assigned.  This doesn't comply with the
IB spec section 4.1.1 "GID usage and properties".
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

When the device has only Ethernet ports, don't try to allocate range
of steerable UD QPs since they aren't needed.  This fixes an issue
where mlx4 VFs tried to allocate a range of UD steerable QPs, but
failed to do so.

Fixes: c1c98501 ("IB/mlx4: Add support for steerable IB UD QPs")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Pull Xen bugfixes from Konrad Rzeszutek Wilk:
 "This has an healthy amount of code being removed - which we do not use
  anymore (the only user of it was ia64 Xen which had been removed
  already).  The other bug-fixes are to make Xen ARM be able to use the
  new event channel mechanism and proper export of header files to
  user-space.

  Summary:
   - Fix ARM and Xen FIFO not working.
   - Remove more Xen ia64 vestigates.
   - Fix UAPI missing Xen files"

* tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  ia64/xen: Remove Xen support for ia64 even more
  xen: install xen/gntdev.h and xen/gntalloc.h
  xen/events: bind all new interdomain events to VCPU0

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Pull regulator fixes from Mark Brown:
 "Two driver fixes, one fixing the mapping of interrupts on da9055
  (which previously wouldn't have worked at all) and a fix for reference
  counting OF nodes in the max14577 driver"

* tag 'regulator-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: da9055: Remove use of regmap_irq_get_virq()
  regulator: max14577: Add missing of_node_put

Pull GPIO fixes from Linus Walleij:
 "Here are some accumulated patches with small fixes for this and that
  in a few GPIO drivers, and a more important fix to an #ifdef in the
  GPIO consumer header.

  Summary:

   - Get #ifdef's right in the <linux/gpio/consumer.h> header.

   - Minor fixes to tb10x, clps711x, bcm281xx, intel-mid and xtensa GPIO
     drivers"

* tag 'gpio-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: consumer.h: Move forward declarations outside #ifdef
  gpio: tb10x: GPIO_TB10X needs to select GENERIC_IRQ_CHIP
  gpio: clps711x: Add module alias to support module auto loading
  gpio: bcm281xx: Update MODULE_AUTHOR
  gpio: intel-mid: fix the incorrect return of idle callback
  gpio: xtensa: fix build when XCHAL_HAVE_CP is 0

Pull spi fixes from Mark Brown:
 "A few driver and documentation fixes, plus a fix for double error
  handling which had crept in due to the confusing documentation - it
  wasn't clear if the core or the driver was responsible for cleanup in
  error cases so both tried to do it with unfortunate results"

* tag 'spi-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: nuc900: Set SPI_LSB_FIRST for master->mode_bits if hw->pdata->lsb is true
  spi: rspi: Document support for Renesas QSPI in Kconfig
  spi: Fix crash with double message finalisation on error handling
  spi: correct the transfer_one_message documentation wording
  spi: document the transfer_one spi_master callback
  spi: spi.h: clarify the documentation of transfer_one

Pull drm fixes from Dave Airlie:
 "Nothing too crazy.

  Radeon irq fixes, i915 regression fixes, exynos fixes, tda998x chip
  fixes, and a bunch of msm fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  drm/i915: Pair va_copy with va_end in i915_error_vprintf
  drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS
  drm/i915: Disable dp aux irq on g4x
  drm/msm: bigger synchronization hammer
  drm/exynos: Convert to use the standard hdmi.h header
  drm/exynos: Fix trivial typo
  drm/exynos: Remove unnecessary semicolon
  drm/exynos: Fix multiplatform breakage for ipp/gsc
  drm/exynos: Fix freeing issues in exynos_drm_drv.c
  drm/radeon: add missing include in btc_dpm.c
  drm/radeon/dpm: fix uninitialized read from stack in kv_dpm_late_enable
  drm/radeon: remove useless return
  drm/radeon/dpm: use stored max_vddc rather than looking it up
  drm/radeon/dpm: use the driver state for dpm debugfs
  drm/radeon: fix UVD IRQ support on 7xx
  drm/radeon: fix UVD IRQ support on SI
  drm/msm: fix deadlock in bo create fail path
  drm/msm/mdp4: cursor fixes
  drm/msm/mdp4: pageflip fixes
  drm/msm/mdp5: fix ref leaks in error paths
  ...

This reverts commit d3c56568.

The reverted commit breaks audio through headphone line out on
the Acer TravelMate B113 (Type1Sku0) Notebook, my main work
machine. I don't know much about it but this fixes my problem.
Bisected and tested.

Fixes: d3c56568 ('ALSA: hda/realtek - Avoid invalid COEFs for ALC271X')
Cc: <stable@vger.kernel.org>
Tested-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When mkfs issues a full device discard and the device only
supports discards of a smallish size, we can loop in
blkdev_issue_discard() for a long time. If preempt isn't enabled,
this can turn into a softlock situation and the kernel will
start complaining.

Add an explicit cond_resched() at the end of the loop to avoid
that.

Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge remote-tracking branches 'regulator/fix/da9055' and 'regulator/fix/max14577' into regulator-linus

Pull powerpc updates from Ben Herrenschmidt:
 "Here is some powerpc goodness for -rc2.  Arguably -rc1 material more
  than -rc2 but I was travelling (again !)

  It's mostly bug fixes including regressions, but there are a couple of
  new things that I decided to drop-in.

  One is a straightforward patch from Michael to add a bunch of P8 cache
  events to perf.

  The other one is a patch by myself to add the direct DMA (iommu
  bypass) for PCIe on Power8 for 64-bit capable devices.  This has been
  around for a while, I had lost track of it.  However it's been in our
  internal kernels we use for testing P8 already and it affects only P8
  related code.  Since P8 is still unreleased the risk is pretty much
  nil at this point"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/powernv: Add iommu DMA bypass support for IODA2
  powerpc: Fix endian issues in kexec and crash dump code
  powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP
  powerpc/xmon: Don't signal we've entered until we're finished printing
  powerpc/xmon: Fix timeout loop in get_output_lock()
  powerpc/xmon: Don't loop forever in get_output_lock()
  powerpc/perf: Configure BHRB filter before enabling PMU interrupts
  crypto/nx/nx-842: Fix handling of vmalloc addresses
  powerpc/pseries: Select ARCH_RANDOM on pseries
  powerpc/perf: Add Power8 cache & TLB events
  powerpc/relocate fix relocate processing in LE mode
  powerpc: Fix kdump hang issue on p8 with relocation on exception enabled.
  powerpc/pseries: Disable relocation on exception while going down during crash.
  powerpc/eeh: Drop taken reference to driver on eeh_rmv_device
  powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y

Initialize persistent_purge_work work_struct on xen_blkif_alloc (and
remove the previous initialization done in purge_persistent_gnt). This
prevents flush_work from complaining even if purge_persistent_gnt has
not been used.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jens Axboe <axboe@fb.com>

These are a number of fixes from the patch set which Jean-Francois has
been working on which I think are important to be merged during -rc, and
have been tested independently here.  I've been in discussion with Rob,
who is happy that I send these directly to you.

* 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: fix the ENABLE_SPACE register
  drm/i2c: tda998x: set the PLL division factor in range 0..3
  drm/i2c: tda998x: force the page register at startup time
  drm/i2c: tda998x: free the CEC device on encoder_destroy
  drm/i2c: tda998x: check the CEC device creation
  drm/i2c: tda998x: fix bad value in the AIF

3 regression fixes in i915

* tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel:
  drm/i915: Pair va_copy with va_end in i915_error_vprintf
  drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS
  drm/i915: Disable dp aux irq on g4x