- 14 Jun, 2005 1 commit
-
-
Linus Torvalds authored
This adds a clause that notes explicitly that the person doing the sign-off knows that the project (and his sign-off) is public and will possibly get archived and re-distributed.
-
- 13 Jun, 2005 23 commits
-
-
J. Simonetti authored
This patch alows you to change the source address of icmp error messages. It applies cleanly to 2.6.11.11 and retains the default behaviour. In the old (default) behaviour icmp error messages are sent with the ip of the exiting interface. The new behaviour (when the sysctl variable is toggled on), it will send the message with the ip of the interface that received the packet that caused the icmp error. This is the behaviour network administrators will expect from a router. It makes debugging complicated network layouts much easier. Also, all 'vendor routers' I know of have the later behaviour. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
link local address. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Yasevich authored
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Yasevich authored
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rémi Denis-Courmont authored
Userland layer-2 tunneling devices allocated through the TUNTAP driver (drivers/net/tun.c) have a type of ARPHRD_NONE, and have no link-layer address. The kernel complains at regular interval when IPv6 Privacy extension are enabled because it can't find an hardware address : Dec 29 11:02:04 auguste kernel: __ipv6_regen_rndid(idev=cb3e0c00): cannot get EUI64 identifier; use random bytes. IPv6 Privacy extensions should probably be disabled on that sort of device. They won't work anyway. If userland wants a more usual Ethernet-ish interface with usual IPv6 autoconfiguration, it will use a TAP device with an emulated link-layer and a random hardware address rather than a TUN device. As far as I could fine, TUN virtual device from TUNTAP is the very only sort of device using ARPHRD_NONE as kernel device type. Signed-off-by: Rmi Denis-Courmont <rdenis@simphalempin.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
We saw following trace several times: |BUG: using smp_processor_id() in preemptible [00000001] code: httpd/30137 |caller is icmpv6_send+0x23/0x540 | [<c01ad63b>] smp_processor_id+0x9b/0xb8 | [<c02993e7>] icmpv6_send+0x23/0x540 This is because of icmpv6_socket, which is the only one user of smp_processor_id() in icmpv6_send(), AFAIK. Since it should be used in non-preemptive context, let's defer the dereference after disabling preemption (by icmpv6_xmit_lock()). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Nicolas Pitre authored
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ralf Baechle authored
From: Ralf Baechle <ralf@linux-mips.org> There are archives of the old list at http://oss.sgi.com/archives/netdevSigned-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andi Kleen authored
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Rini authored
<linux/if_tr.h> uses __be16, but does not directly include <asm/byteorder.h>. Add this in, so that dhcp/net-tools token ring code can compile again. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Trond Myklebust authored
This fixes a data corruption error for mail delivery applications that expect to be able to do posix locking and then append writes on NFS. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Brownell authored
This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
The current radeonfb memset's the framebuffer to 0 when loaded. This removes occasional artifacts but has the nasty side effect that if you load radeonfb without framebuffer console, you destroy the VGA text buffer, font, etc... radeon must not touch the framebuffer content when it doesn't "own" it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Now m68k no longer sets HAVE_ARCH_GET_SIGNAL_TO_DELIVER, can it be removed completely? Or may ARM26 still need it? Note that its usage was removed from kernel/signal.c about 2 months ago. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- 12 Jun, 2005 1 commit
-
-
David Brownell authored
Patch from David Brownell The ARM generic Kconfig filters out IDE options ... except for an error prone ARMload of special cases. This adds one general case to the systems that will offer IDE options: kernels with PCMCIA support, which probably want to use IDE to access CompactFlash cards. This might allow many (most?) of the other cases to disappear, for systems that only see IDE hardware through CF cards. Right now this one patch is used to gate access to CF cards, including MicroDrives, for both omap_cf and at91_cf drivers. Signed-off-by: David Brownell Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 11 Jun, 2005 2 commits
-
- 10 Jun, 2005 4 commits
-
-
Linus Torvalds authored
The patch to add them keeps on getting applied, over and over again ;) Hopefully no more.
-
Dave Airlie authored
This removes a bogus hack from the radeon IRQ handler. There is a better fix from myself and benh in DRM CVS but I'll wait until 2.6.13-rc so it gets more testing. Signed-off-by: Dave Airlie <airlied@linux.ie>
-
Dave Airlie authored
Add pci identifier for i945G chipset Signed-off-by: Dave Airlie <airlied@linux.ie>
-
Benjamin Herrenschmidt authored
Despite all the care lately in making the powermac sleep/wakeup as robust as possible, there is still a nasty related to the use of cpufreq on PMU based machines. Unfortunately, it affects paulus old powerbook so I have to fix it :) We didn't manage to understand what is precisely going on, it leads to memory corruption and might have to do with RAM not beeing properly refreshed when a cpufreq transition is done right before the sleep. The best workaround (and less intrusive at this point) we could come up with is included in this patch. We basically do _not_ force a switch to high speed on suspend anymore (that is what is causing the problem) on those machines. We still force a speed switch on wakeup (since we don't know what speed we are coming back from sleep at, and that seems to work fine). Since, during this short interval, the actual CPU speed might be incorrect, we also hack around by multiplying loops_per_jiffy by 2 (max speed factor on those machines) during early wakeup stage to make sure udelay's during that time aren't too short. For after 2.6.12, we'll change udelay implementation to use the CPU timebase (which is always constant) instead like we do on ppc64 and thus get rid of all those problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 09 Jun, 2005 9 commits
-
-
Michael Ellerman authored
My patch from a few weeks back (now in mainline), called "Cleanup skbs to prevent unregister_netdevice() hanging", can cause our TX timeout code to fire on machines with lots of VLANs (because it takes > 2 seconds between when we stop the queues and when we're finished stopping the connections). When that happens the TX timeout code freaks out and does a WARN_ON() because as far as it's concerned there shouldn't be a TX timeout happening, which is fair enough. I have a "proper" fix for this, which is to a) do refcounting on connections and b) implement a proper ack timer so we don't keep unacked skbs lying around for ever. But for 2.6.12 I propose just supressing the WARN_ON(). Users will still see the "NETDEV WATCHDOG" warning, but that's not nearly as bad as a WARN_ON() which users interpret as an Oops. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eugene Surovegin authored
Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Narendra Sankar authored
MSI functionality is broken on the GC_LE x86 chipset that Serverworks developed and that is being used in various platforms today. Broadcom is going to push out to the kernel MSI enabled Gigabit drivers (in the very near future), and we would like to make sure that MSI does not get enabled on any platforms using the GC_LE chipset (device id 0x17). Following the AMD 8131 example, I am including a patch to disable MSI functionality when a GCNB_LE is detected. Please let me know if there are any issues with this. This is a permanent fix for this chipset, as the hardware will not be updated. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Steve French authored
and add_to_page_cache fails. Thanks to Shaggy for pointing out the fix. Signed-off-by: Steve French (sfrench@us.ibm.com) Signed-off-by: Shaggy (shaggy@us.ibm.com)
-
Vincent Sanders authored
Patch from Vincent Sanders This fixes the "multiple definitions of cpufreq_get" build faliure on the hackkit SA1100 platform. Signed-off-by: Vincent Sanders Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-