- 17 Aug, 2011 19 commits
-
-
Stephen Warren authored
commit 29591ed4 upstream. Two issues were preventing module snd-soc-tegra-wm8903.ko from being removed and re-inserted: a) The speaker-enable GPIO is hosted by the WM8903 chip. This GPIO must be freed before snd_soc_unregister_card() is called, because that triggers wm8903.c:wm8903_remove(), which calls gpiochip_remove(), which then fails if any of the GPIOs are in use. To solve this, free all GPIOs first, so the code doesn't care where they come from. b) We need to call snd_soc_jack_free_gpios() to match the call to snd_soc_jack_add_gpios() during initialization. Without this, the call to snd_soc_jack_add_gpios() fails during any subsequent modprobe and initialization, since the GPIO and IRQ are already registered. In turn, this causes the headphone state not to be monitored, so the headphone is assumed not to be plugged in, and the audio path to it is never enabled. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stephen Warren authored
commit a96edd59 upstream. Not all PCM devices have all sub-streams. Specifically, the SPDIF driver only supports playback and hence has no capture substream. Check whether a substream exists before dereferencing it, when de-allocating DMA buffers in tegra_pcm_deallocate_dma_buffer. Signed-off-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
Mark Brown authored
commit 66780504 upstream. The I2C address is misformatted and would never match. Signed-off-by:
-
Daniel Mack authored
commit 15439bde upstream. This fixes faulty outbount packets in case the inbound packets received from the hardware are fragmented and contain bogus input iso frames. The bug has been there for ages, but for some strange reasons, it was only triggered by newer machines in 64bit mode. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
William Light <wrl@illest.net> Reported-by:
Pedro Ribeiro <pedrib@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Julia Lawall authored
commit 66a89b21 upstream. rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chas Williams authored
commit a08af810 upstream. Reported-by:
Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by:
Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Bird authored
commit 35e9e21f upstream. This patch adds the product ID of Huawei's Vodafone K4511 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by:
Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by:
-
Andrew Bird authored
commit 0930bb46 upstream. This patch adds the product ID of Huawei's Vodafone K4510 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by:
-
Andrew Bird authored
commit e2949080 upstream. This patch adds the product ID of Huawei's Vodafone K3771 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by:
-
Andrew Bird authored
commit 07b21fd8 upstream. This patch adds the product ID of Huawei's Vodafone K3770 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by:
-
Vijay Chavan authored
commit e4685617 upstream. A new device ID pair is added for Qualcomm Modem present in Sagemcom's HiLo3G module. Signed-off-by:
Vijay Chavan <VijayChavan007@gmail.com> Signed-off-by:
-
Nick Bowler authored
commit a871e4f5 upstream. Connecting the V2M to a Linux host results in a constant stream of errors spammed to the console, all of the form sd 1:0:0:0: ioctl_internal_command return code = 8070000 : Sense Key : 0x4 [current] : ASC=0x0 ASCQ=0x0 The errors appear to be otherwise harmless. Add an unusual_devs entry which eliminates all of the error messages. Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ionut Nicu authored
commit 1862cdd5 upstream. Even if it's unlikely for this to cause an error, there is a typo in the code that uses the bitwise-AND operator instead of the logical one. Signed-off-by:
Ionut Nicu <ionut.nicu@cloudbit.ro> Signed-off-by:
-
Maxim Nikulin authored
commit 4f1a7a3e upstream. Assign operator instead of equality test in the usbtmc_ioctl_abort_bulk_in() function. Signed-off-by:
Maxim A. Nikulin <M.A.Nikulin@gmail.com> Signed-off-by:
-
John Stultz authored
commit 72c487df upstream. an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Reported-by:
Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 7de7c7d2 upstream. wMaxPacketSize is __le16 and should be accessed as such. Also fix the wBytesPerInterval assignment while here. v2: also fix the wBytesPerInterval assigment, noticed by Matt Evans This patch should be backported to the 3.0 kernel. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
-
Sarah Sharp authored
commit 7bd89b40 upstream. Commit fccf4e86 "USB: Free bandwidth when usb_disable_device is called" caused a bit of an issue when the xHCI host controller driver is unloaded. It changed the USB core to remove all endpoints when a USB device is disabled. When the driver is unloaded, it will remove the SuperSpeed split root hub, which will disable all devices under that roothub and then halt the host controller. When the second High Speed split roothub is removed, the USB core will attempt to disable the endpoints, which will submit a Configure Endpoint command to a halted host controller. The command will eventually time out, but it makes the xHCI driver unload take *minutes* if there are a couple of USB 1.1/2.0 devices attached. We must halt the host controller when the SuperSpeed roothub is removed, because we can't allow any interrupts from things like port status changes. Make several different functions not submit commands or URBs to the host controller when the host is halted, by adding a check in xhci_check_args(). xhci_check_args() is used by these functions: xhci.c-int xhci_urb_enqueue() xhci.c-int xhci_drop_endpoint() xhci.c-int xhci_add_endpoint() xhci.c-int xhci_check_bandwidth() xhci.c-void xhci_reset_bandwidth() xhci.c-static int xhci_check_streams_endpoint() xhci.c-int xhci_discover_or_reset_device() It's also used by xhci_free_dev(). However, we have to take special care in that case, because we want the device memory to be freed if the host controller is halted. This patch should be backported to the 2.6.39 and 3.0 kernel. Signed-off-by:
-
JiSheng Zhang authored
commit 6768458b upstream. Software should set XHCI_HC_OS_OWNED bit to request ownership of xHC. This patch should be backported to kernels as far back as 2.6.31. Signed-off-by:
JiSheng Zhang <jszhang3@gmail.com> Signed-off-by:
-
Stefan Lippers-Hollmann authored
commit 589c3ca0 upstream. declaring MODULE_FIRMWARE has apparently forgotten while removing the embedded firmware arrays in 0a8692b5 (rtl8192u_usb: Remove built-in firmware images). Signed-off-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by:
-
- 16 Aug, 2011 21 commits
-
-
Greg Kroah-Hartman authored
-
Peter Zijlstra authored
commit 5c723ba5 upstream. In commit 2efaca92 ("mm/futex: fix futex writes on archs with SW tracking of dirty & young") we forgot about MMU=n. This patch fixes that. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
David Howells <dhowells@redhat.com> Link: http://lkml.kernel.org/r/1311761831.24752.413.camel@twinsSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
David S. Miller authored
commit c92761fd upstream. Reported-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Alex Hacker authored
commit 118c9db5 upstream. This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Signed-off-by:
Alex Hacker <hacker@epn.ru> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Rajkumar Manoharan authored
commit 15052f81 upstream. CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Richard Cochran authored
commit 8028837d upstream. The dp83640 buffers receive time stamps from special PHY status frames, matching them to received PTP packets in a work queue. Because the timeout for orphaned time stamps is so long and the buffer is so small, the driver can drop time stamps under moderate PTP traffic. This commit fixes the issue by decreasing the timeout to (at least) one timer tick and increasing the buffer size. Signed-off-by:
Richard Cochran <richard.cochran@omicron.at> Signed-off-by:
-
Richard Cochran authored
commit cbc05660 upstream. After resetting the time, the PPS signals on the FIPER output channels are incorrectly offset from the clock time, as can be readily verified by a looping back the FIPER to the external time stamp input. Despite its name, setting the "Fiper Realignment Disable" bit seems to fix the problem, at least on the P2020. Also, following the example code from the Freescale BSP, it is not really necessary to disable and re-enable the timer in order to reprogram the FIPER. (The documentation is rather unclear on this point. It seems that writing to the alarm register also disables the FIPER.) Signed-off-by:
-
Bruce Allan authored
commit c407bee8 upstream. This issue is present all the way back to 2.6.34 kernels. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Jeffrey Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Eric Sandeen authored
commit 8c208719 upstream. Commit df5e6223 ("ext4: fix deadlock in ext4_symlink() in ENOSPC conditions") recalculated the number of credits needed for a long symlink, in the process of splitting it into two transactions. However, the first credit calculation under-counted because if selinux is enabled, credits are needed to create the selinux xattr as well. Overrunning the reservation will result in an OOPS in jbd2_journal_dirty_metadata() due to this assert: J_ASSERT_JH(jh, handle->h_buffer_credits > 0); Fix this by increasing the reservation size. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Eric Sandeen authored
commit d2db60df upstream. Commit ae54870a ("ext3: Fix lock inversion in ext3_symlink()") recalculated the number of credits needed for a long symlink, in the process of splitting it into two transactions. However, the first credit calculation under-counted because if selinux is enabled, credits are needed to create the selinux xattr as well. Overrunning the reservation will result in an OOPS in journal_dirty_metadata() due to this assert: J_ASSERT_JH(jh, handle->h_buffer_credits > 0); Fix this by increasing the reservation size. Signed-off-by:
-
Anton Blanchard authored
commit bed9a315 upstream. On a box with 8TB of RAM the MMU hashtable is 64GB in size. That means we have 4G PTEs. pSeries_lpar_hptab_clear was using a signed int to store the index which will overflow at 2G. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Anton Blanchard authored
commit 966728dd upstream. I have a box that fails in OF during boot with: DEFAULT CATCH!, exception-handler=fff00400 at %SRR0: 49424d2c4c6f6768 %SRR1: 800000004000b002 ie "IBM,Logh". OF got corrupted with a device tree string. Looking at make_room and alloc_up, we claim the first chunk (1 MB) but we never claim any more. mem_end is always set to alloc_top which is the top of our available address space, guaranteeing we will never call alloc_up and claim more memory. Also alloc_up wasn't setting alloc_bottom to the bottom of the available address space. This doesn't help the box to boot, but we at least fail with an obvious error. We could relocate the device tree in a future patch. Signed-off-by:
-
Anton Blanchard authored
commit b1301797 upstream. Recent versions of firmware will fail to unmap the virtual processor area if we have a dispatch trace log registered. This causes kexec to fail. If a trace log is registered this patch unregisters it before the SLB shadow and virtual processor areas, fixing the problem. The address argument is ignored by firmware on unregister so we may as well remove it. Signed-off-by:
-
Tyler Hicks authored
commit f61500e0 upstream. When an eCryptfs inode's lower file has been closed, and the pointer has been set to NULL, return an error when trying to do a lower read or write rather than calling BUG(). https://bugzilla.kernel.org/show_bug.cgi?id=37292Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
John Johansen authored
commit 76435548 upstream. Close a TOCTOU race for mounts done via ecryptfs-mount-private. The mount source (device) can be raced when the ownership test is done in userspace. Provide Ecryptfs a means to force the uid check at mount time. Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0785a8e8 ] arch/sparc/mm/init_64.c:1622:22: error: unused variable '__swapper_4m_tsb_phys_patch_end' [-Werror=unused-variable] arch/sparc/mm/init_64.c:1621:22: error: unused variable '__swapper_4m_tsb_phys_patch' [-Werror=unused-variable] Signed-off-by:
-
David S. Miller authored
[ Upstream commit 961f65fc ] There is currently no upper limit on the mondo queue sizes we'll use, which guarentees that we'll eventually his page allocation limits, and thus allocation failures, due to MAX_ORDER. Cap the sizes sanely, current limits are: CPU MONDO 2 * max_possible_cpus DEV MONDO 256 (basically NR_IRQS) RES MONDO 128 NRES MONDO 4 Signed-off-by:
-
David S. Miller authored
[ Upstream commit 9076d0e7 ] On sun4v this is basically required since we point the hypervisor and the TSB walking hardware at these tables using physical addressing too. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 56d205cc ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit ea5e7447 ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit e2eb9f81 ] Signed-off-by:
-
