- 10 Nov, 2005 36 commits
-
-
Paul Mackerras authored
We were getting the last_jiffy per-cpu variable set ahead of the current timebase in smp_space_timers on SMP machines. This caused the loop in timer_interrupt to loop virtually forever, since tb_ticks_since assumes that it will never be called with the timebase behind the last_jiffy value. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
A couple of bugs crept in with the merge of smp.c... Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Gcc 4 doesn't like being told to inline a recursive function... Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
scanlog.c is only compiled on pSeries. Thus, this patch moves it to platforms/pseries. Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64). Built for iSeries (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
-
Paul Mackerras authored
We had a "64" that didn't get changed to BITS_PER_LONG, resulting in find_next_bit not working correctly. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This adds code to work around some problems with old versions of Open Firmware, such as on the early powermacs (7500 etc.) and the "Longtrail" CHRP machine. On these machines we have to claim the physical and virtual address ranges explicitly when claiming memory and then set up a V->P mapping. The Longtrail has more problems: setprop doesn't work, and we have to set an "allow-reclaim" variable to 0 in order to get claim on physical memory ranges to fail if the memory is already claimed. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
14-eeh-device-bar-save.patch After a PCI device has been resest, the device BAR's and other config space info must be restored to the same state as they were in when the firmware first handed us this device. This will allow the PCI device driver, when restarted, to correctly recognize and set up the device. Tis patch saves the device config space as early as reasonable after the firmware has handed over the device. Te state resore funcion is inteded for use by the EEH recovery routines. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
13-eeh-recovery-support-routines.patch EEH Recovery support routines This patch adds routines required to help drive the recovery of EEH-frozen slots. The main function is to drive the PCI #RST signal line high for a qurter of a second, and then allow for a second & a half of settle time. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
12-eeh-event-dispatcher.patch ppc64: EEH Recovery dispatcher thread This patch adds a mechanism to create recovery threads when an EEH event is received. Since an EEH freeze state may be detected within an interrupt context, we need to get out of the interrupt context before starting recovery. This dispatcher does this in two steps: first, it uses a workqueue to get out, and then lanuches a kernel thread, so that the recovery routine can sleep for exteded periods without upseting the keventd. A kernel thread is created with each EEH event, rather than having one long-running daemon started at boot time. This is because it is anticipated that EEH events will be very rare (very very rare, ideally) and so its pointless to cluter the process tables with a daemon that will almost never run. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
11-eeh-move-to-powerpc.patch Move arch/ppc64/kernel/eeh.c to arch//powerpc/platforms/pseries/eeh.c No other changes (except for Makefile to build it) Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
10-EEH-enable-bugfix.patch Bugfix: With the curent linux-2.6.14-rc2-git6, EEH errors are ignored because thier detection requires an unused, uninitialized flag to be set. This patch removes the unused flag. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
09-hotplug-bugfix.patch In the current 2.6.14-rc2-git6 kernel, performing a Dynamic LPAR Add of a hotplug slot will crash the system, with the following (abbreviated) stack trace: cpu 0x3: Vector: 700 (Program Check) at [c000000053dff7f0] pc: c0000000004f5974: .__alloc_bootmem+0x0/0xb0 lr: c0000000000258a0: .update_dn_pci_info+0x108/0x118 c0000000000257c8 .update_dn_pci_info+0x30/0x118 (unreliable) c0000000000258fc .pci_dn_reconfig_notifier+0x4c/0x64 c000000000060754 .notifier_call_chain+0x68/0x9c The root cause was that __init __alloc_bootmem() was called long after boot had finished, resulting in a crash because this routine is undefined after boot time. The patch below fixes this crash, and adds some docs to clarify the code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
08-eeh-spin-counter.patch One an EEH event is triggers, all further I/O to a device is blocked (until reset). Bad device drivers may end up spinning in their interrupt handlers, trying to read an interrupt status register that will never change state. This patch moves that spin counter to a per-device structure, and adds some diagnostic prints to help locate the bad driver. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
07-eeh-report-race.patch When a PCI slot is isolated, all PCI functions under that slot are affected. If hese functions have separate device drivers, the EEH isolation event might be reported multiple times. This patch adds a lock to prevent the racing of such multiple reports. It also marks every device under the slot as having experienced an EEH event, so that multiple reports may be recognized more easily. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
06-eeh-empty-slot-error.patch Performing PCI config-space reads to empty PCI slots can lead to reports of "permanent failure" from the firmware. Ignore permanent failures on empty slots. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
05-eeh-slot-error-detail.patch This patch encapsulates a section of code that reports the EEH event. The new subroutine can be used in several places to report the error. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
04-eeh-statistics.patch This minor patch adds some statistics-gathering counters that allow the behaviour of the EEH subsystem o be monitored. While far from perfect, it does provide a rudimentary device that makes understanding of the current state of the system a bit easier. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
03-eeh-addr-cache-cleanup.patch This is a minor patch to clean up a buglet related to the PCI address cache. (The buglet doesn't manifes itself unless there are also bugs elsewhere, which is why its minor.). Also: -- Improved debug printing. -- Declare some private routines as static -- Adds reference counting to struct pci_dn->pcidev structure Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
02-eeh-minor-cleanup.patch This patch performs some minor cleanup of the eeh.c file, including: -- trim some trailing whitespace -- remove extraneous #includes -- use the macro PCI_DN uniformly, instead of the void pointer chase. -- typos in comments -- improved debug printk's Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
linas authored
01-pci-dn-uniformization.patch This patch changes the rtas_pci interface to use the new struct pci_dn structure for two routines that work with pci device nodes. This patch also does some minor janitorial work: it uses some handy macros and cleans up some trailing whitespace in the affected file. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
Early calls to __ioremap() will panic if the hash insertion fails. This patch makes them return NULL instead. It happens with some pSeries users who enabled CONFIG_BOOTX_TEXT. The later is getting an incorrect address for the fame buffer and the hash insertion fails. With this patch, it will display an error instead of crashing at boot. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Fix a few compile warnings arch/ppc64/boot/addRamDisk.c:166: warning: int format, long unsigned int arg (arg 2) arch/ppc64/boot/addRamDisk.c:170: warning: int format, long unsigned int arg (arg 2) arch/ppc64/boot/addRamDisk.c:265: warning: unsigned int format, long unsigned int arg (arg 2) arch/ppc64/boot/addRamDisk.c:302: warning: unsigned int format, long unsigned int arg (arg 3) Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
A stripped vmlinux does not contain enough symbols to recreate the System.map. The System.map file is only used to determine the end of the runtime memory size. This is the same value (rounded up to PAGE_SIZE) as ->memsiz in the ELF program header. Also, the target vmlinux.initrd doesnt work in 2.6.14: arch/ppc64/boot/addRamDisk arch/ppc64/boot/ramdisk.image.gz vmlinux.strip arch/ppc64/boot/vmlinux.initrd Name of vmlinux output file missing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Use a local variable for the input filenames. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Remove initialization of local variables. They get all values assigned before use. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Marcelo Tosatti authored
Due to the recent update of the platform code, some platform device drivers fail to compile. This fix is for fs_enet, adding #include of a new header, to which a number of platform stuff has been relocated. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Matt Porter authored
Fixes ppc44x fpu support that broke from a bad arch/powerpc merge. Instead of adding KernelFP back in (which duplicates code) we use the same kernel fpu unavailable handler as classic PPC processors. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
This patch merges current.h. This is a one-big-ifdef merge, but both versions are so tiny, I think we can live with it. While we're at it, we get rid of the fairly pointless redirection through get_current() in the ppc64 version. Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64). Built for 32-bit pmac (ARCH=powerpc & ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
-
- 09 Nov, 2005 4 commits
-
-
Linus Torvalds authored
AGP shouldn't use "global_flush_tlb()" to flush the AGP mappings, that i spurely an x86'ism. The proper AGP mapping flusher that should be used is "flush_agp_mappings()", which on x86 obviously happens to do a global TLB flush. This makes AGP (or at least the config _I_ happen to use) compile again on ppc64. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
-
Linus Torvalds authored
-