- 14 Jun, 2007 14 commits
-
-
Benjamin Herrenschmidt authored
This adds a "capabilities" file to spu contexts consisting of a list of linefeed separated capability names. The current exposed capabilities are "sched" (the context is scheduleable) and "step" (the context supports single stepping). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This patch adds support for SPU single stepping. The single step bit is set in the SPU when the current process is being single-stepped via ptrace. The spu then stops and returns with a specific flag set and the syscall exit code will generate the SIGTRAP. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This makes unmap_vm_area static and a wrapper around a new exported unmap_kernel_range that takes an explicit range instead of a vm_area struct. This makes it more versatile for code that wants to play with kernel page tables outside of the standard vmalloc area. (One example is some rework of the PowerPC PCI IO space mapping code that depends on that patch and removes some code duplication and horrible abuse of forged struct vm_struct). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Twiddle the copyright notices. Per current guidelines, the use of the (C) or (c) in source code is deprecated. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 6 +++++- arch/powerpc/platforms/pseries/eeh_cache.c | 3 ++- arch/powerpc/platforms/pseries/eeh_driver.c | 6 +++--- 3 files changed, 10 insertions(+), 5 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Remove some dead code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Track and report the number of times we read an all-1s value (0xff, 0xffff or 0xffffffff) from each device which is valid data, not indicating EEH isolation. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 5 +++++ arch/powerpc/platforms/pseries/eeh_sysfs.c | 3 +++ include/asm-powerpc/pci-bridge.h | 1 + 3 files changed, 9 insertions(+) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Add sysfs blinkenlights for EEH statistics. Shuffle the eeh_add_device_tree() call so that it appears in the correct sequence. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/eeh.c | 4 + arch/powerpc/platforms/pseries/eeh_cache.c | 2 arch/powerpc/platforms/pseries/eeh_sysfs.c | 84 +++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c | 7 +- include/asm-powerpc/ppc-pci.h | 3 + 6 files changed, 98 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Use the correct CONFIG_ option to mark off the EEH bits. Move the EEH bits to the bottom of the struct. The config_space array is used by EEH only; it does not need to be part of the struct for non-pseries machines. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- Revised patch, per commments from Michael Ellerman. include/asm-powerpc/pci-bridge.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jon Tollefson authored
Move common code out of if/else. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> ---- hash_native_64.c | 3 +-- 1 files changed, 1 insertion(+), 2 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Segher Boessenkool authored
Maybe the type should have been char[] instead of __u8[] in the first place, but this will do. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Anton Blanchard authored
Reserve two TIF flags for perfmon2 and shift them into the low 16 bits so we can use single assembly instructions to create constants based off them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Milton Miller authored
Previously, registering this early console would just result in dropping early buffered printk output until a udbg_putc was registered. However, commit 69331af7 clears the CON_PRINTBUFFER flag on the main console when a CON_BOOT (early) console has been registered, resulting in the buffered messages never being displayed to the user. This fixes the problem by making sure we don't register udbg_console on platforms that don't implement udbg_putc. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The per-cpu area(a) for the secondary CPU(s) isn't getting allocated on old SMP powermacs that don't have the secondary CPU(s) listed in the device tree, as per-cpu areas are now only allocated for CPUs in the cpu_possible_map, and we aren't setting the bits for the secondary CPU(s) until smp_prepare_cpus(), which is after per-cpu allocation. Therefore this sets the bits for CPUs 1..3 in cpu_possible_map in pmac_setup_arch, so they get per-cpu data allocated. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 13 Jun, 2007 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: move input-polldev to drivers/input Input: i8042 - add ULI EV4873 to noloop list Input: i8042 - add ASUS P65UP5 to the noloop list Input: usbtouchscreen - fix fallout caused by move from drivers/usb
-
Pierre Ossman authored
Somehow the code to read the read-only switch of SD cards got lost in the reorganisation. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Ragner Magalhaes authored
Ignoring OMAP_MMC_STAT_CARD_ERR, treating it as if the command completed correctly. Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Dmitry Torokhov authored
To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (89 commits) myri10ge: update driver version myri10ge: report when the link partner is running in Myrinet mode myri10ge: limit the number of recoveries NetXen: Fix link status messages Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100" [PATCH] libertas: convert libertas_mpp into anycast_mask [PATCH] libertas: actually send mesh frames to mesh netdev [PATCH] libertas: deauthenticate from AP in channel switch [PATCH] libertas: pull current channel from firmware on mesh autostart [PATCH] libertas: reduce SSID and BSSID mixed-case abuse [PATCH] libertas: remove WPA_SUPPLICANT structure [PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid [PATCH] libertas: tweak association debug output [PATCH] libertas: fix big-endian associate command. [PATCH] libertas: don't byte-swap firmware version number. It's a byte array. [PATCH] libertas: more endianness fixes, in tx.c this time [PATCH] libertas: More endianness fixes. [PATCH] libertas: first pass at fixing up endianness issues [PATCH] libertas: sparse fixes [PATCH] libertas: fix character set in README ...
-
Jeff Garzik authored
-
Jeff Garzik authored
Merge branch 'libertas-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
Jeff Garzik authored
Merge branch 'libertas' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
- 12 Jun, 2007 15 commits
-
-
Tejun Heo authored
Allowing attribute and symlink dentries to be reclaimed means sd->s_dentry can change dynamically. However, updates to the field are unsynchronized leading to race conditions. This patch adds sysfs_lock and use it to synchronize updates to sd->s_dentry. Due to the locking around ->d_iput, the check in sysfs_drop_dentry() is complex. sysfs_lock only protect sd->s_dentry pointer itself. The validity of the dentry is protected by dcache_lock, so whether dentry is alive or not can only be tested while holding both locks. This is minimal backport of sysfs_drop_dentry() rewrite in devel branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
The condition check doesn't make much sense as it basically always succeeds. This causes NULL dereferencing on certain cases. It seems that parentheses are put in the wrong place. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Eric Sandeen authored
Backport of ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc1/2.6.22-rc1-mm1/broken-out/gregkh-driver-sysfs-allocate-inode-number-using-ida.patch For regular files in sysfs, sysfs_readdir wants to traverse sysfs_dirent->s_dentry->d_inode->i_ino to get to the inode number. But, the dentry can be reclaimed under memory pressure, and there is no synchronization with readdir. This patch follows Tejun's scheme of allocating and storing an inode number in the new s_ino member of a sysfs_dirent, when dirents are created, and retrieving it from there for readdir, so that the pointer chain doesn't have to be traversed. Tejun's upstream patch uses a new-ish "ida" allocator which brings along some extra complexity; this -stable patch has a brain-dead incrementing counter which does not guarantee uniqueness, but because sysfs doesn't hash inodes as iunique expects, uniqueness wasn't guaranteed today anyway. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Brice Goglin authored
Update myri10ge driver version to 1.3.1-1.248. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet, add a message when we detect that the link partner is not running in the right mode. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Mithlesh Thukral authored
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
This reverts commit d52df4a3. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Luis Carlos authored
With firmware 5.220.11.p5, this allows to specify the anycast addresses the device will listen to. The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or 0 to 31 in dec). The value to write on anycast_mask will specify which addresses the device listens to. Bits in a 32 bit int are numbered from 0 (least significative bit) to 31. A specific address ending in YY will be listened to if bit YY in the value is set to one. Examples: 0x00000000 : do not listen to any anycast address 0xFFFFFFFF : listen to every anycast address from :00 to :1F 0x00000013 : listen to anycast addresses :00, :01 and :04 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Williams authored
Found by Luis; got broken during module split. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis Carlos Cobo Rus authored
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis Carlos Cobo Rus authored
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dmitry Torokhov authored
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ondrej Zary authored
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 11 Jun, 2007 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Make sure RQ allocation is always valid RDMA/cma: Fix initialization of next_port IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp() mlx4_core: Don't set MTT address in dMPT entries with PA set mlx4_core: Check firmware command interface revision IB/mthca, mlx4_core: Fix typo in comment mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id mlx4_core: Initialize ctx_list and ctx_lock earlier mlx4_core: Fix CQ context layout
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix smp barriers in test_and_{change,clear,set}_bit [MIPS] Fix IP27 build [MIPS] Fix modpost warnings by making start_secondary __cpuinit [MIPS] SMTC: Fix build error caused by nonsense code. [MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired. [MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments. [MIPS] SMTC: Fix warning. [MIPS] Wire up utimensat, signalfd, timerfd, eventfd [MIPS] Atlas: Fix build. [MIPS] Always install the DSP exception handler. [MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi. [MIPS] Fix KMODE for the R3000
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] CIFS should honour umask [CIFS] Missing flag on negprot needed for some servers to force packet signing [CIFS] whitespace cleanup part 2 [CIFS] whitespace cleanup [CIFS] fix mempool destroy done in wrong order in cifs error path [CIFS] typo in previous patch [CIFS] Fix oops on failed cifs mount (in kthread_stop)
-