- 12 May, 2011 9 commits
-
-
Amit Virdi authored
use tty_insert_flip_string and tty_flip_buffer_push to deliver incoming data packets from the IrDA device instead of delivering the packets directly to the line discipline. Following later approach resulted in warning "Sleeping function called from invalid context". Signed-off-by:
Amit Virdi <amit.virdi@st.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yi Zou authored
Michał Mirosław's patch (http://patchwork.ozlabs.org/patch/94421/) fixes the issue (http://patchwork.ozlabs.org/patch/94188/) about not populating FCoE related flags correctly on vlan devices. However, only NETIF_F_FCOE_CRC is part of the NETIF_F_ALL_TX_OFFLOADS right now, where weed NETIF_F_FCOE_MTU and NETIF_F_FSO as well. Therefore, add NETIF_F_ALL_FCOE to indicate feature flags used by FCoE TX offloads. These include NETIF_F_FCOE_CRC, NETIF_F_FCOE_MTU, and NETIF_F_FSO and add them to be part of NETIF_F_ALL_TX_OFFLOADS. This would eventually make sure all FCoE needed flags are populated properly to vlan devices. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Michał Mirosław authored
Fix VLAN features propagation for devices which change vlan_features. For this to work, driver needs to make sure netdev_features_changed() gets called after the change (it is e.g. after ndo_set_features()). Side effect is that a user might request features that will never be enabled on a VLAN device. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Franco Fichtner authored
The issue was introduced in commit eed2a12f. Signed-off-by:
Franco Fichtner <franco@lastsummer.de> Acked-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
When removing last vlan from a device, garp_uninit_applicant() calls synchronize_rcu() to make sure no user can still manipulate struct garp_applicant before we free it. Use call_rcu() instead, as a step to further net_device dismantle optimizations. Add the temporary garp_cleanup_module() function to make sure no pending call_rcu() are left at module unload time [ this will be removed when kfree_rcu() is available ] Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Shreyas Bhatewara authored
Resending this patch with few changes. Avoid multiple queues when MSI or MSI-X not available Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in the kernel. This will make number of tx and rx queues equal when MSI/X is not configured thus providing better performance. Signed-off-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Joe Perches authored
It's already known non-null above. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
This variable only needs initialization when cmsgs.info is NULL. Use memset to ensure padding is also zeroed so kernel doesn't leak any data. Signed-off-by:
-
Eric Dumazet authored
While trying to remove useless synchronize_rcu() calls, I found l2tp is indeed incorrectly using two of such calls, but also bumps tunnel refcount after list insertion. tunnel refcount must be incremented before being made publically visible by rcu readers. This fix can be applied to 2.6.35+ and might need a backport for older kernels, since things were shuffled in commit fd558d18 (l2tp: Split pppol2tp patch into separate l2tp and ppp parts) Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
- 11 May, 2011 2 commits
-
-
David S. Miller authored
Conflicts: drivers/net/benet/be_main.c
-
-
- 10 May, 2011 29 commits
-
-
-
Oliver Hartkopp authored
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by:
Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Dan Williams authored
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Steffen Klassert authored
Unlike the standard case, disabled anti replay detection needs some nontrivial extra treatment on ESN. RFC 4303 states: Note: If a receiver chooses to not enable anti-replay for an SA, then the receiver SHOULD NOT negotiate ESN in an SA management protocol. Use of ESN creates a need for the receiver to manage the anti-replay window (in order to determine the correct value for the high-order bits of the ESN, which are employed in the ICV computation), which is generally contrary to the notion of disabling anti-replay for an SA. So return an error if an ESN state with disabled anti replay detection is inserted for now and add the extra treatment later if we need it. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by:
-
Eric Dumazet authored
Commit 44345724 (factorize sync-rcu call in unregister_netdevice_many) mistakenly removed one test from dev_close() Following actions trigger a BUG : modprobe bonding modprobe dummy ifconfig bond0 up ifenslave bond0 dummy0 rmmod dummy dev_close() must not close a non IFF_UP device. With help from Frank Blaschka and Einar EL Lueck Reported-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by:
Einar EL Lueck <ELELUECK@de.ibm.com> Signed-off-by:
-
Eric Dumazet authored
ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on ip link set eth2.103 up rmmod tg3 # driver providing eth2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] PGD 11d251067 PUD 11b9e0067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex CPU 0 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables] Pid: 11494, comm: rmmod Tainted: G W 2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6 RIP: 0010:[<ffffffffa0030c9e>] [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] RSP: 0018:ffff88007a19bae8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0) Stack: ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48 ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6 ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7 Call Trace: [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q] [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q] [<ffffffff8137e427>] __dev_close_many+0x87/0xe0 [<ffffffff8137e507>] dev_close_many+0x87/0x110 [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240 [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60 [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q] [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0 [<ffffffff81479d03>] notifier_call_chain+0x53/0x80 [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20 [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60 [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240 [<ffffffff8137e85f>] rollback_registered+0x2f/0x40 [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90 [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30 [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3] We should call vlan_gvrp_request_leave() from unregister_vlan_dev(), not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant() is called right after unregister_netdevice_queue(). In batch mode, unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop(). Signed-off-by:
-
Eric Dumazet authored
Commit e67f88dd (net: dont hold rtnl mutex during netlink dump callbacks) switched rtnl protection to RCU, but we forgot to adjust two rcu_dereference() lockdep annotations : inet_get_link_af_size() or inet_fill_link_af() might be called with rcu_read_lock or rtnl held, so use rcu_dereference_rtnl() instead of rtnl_dereference() Reported-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by:
-
David S. Miller authored
Rearrange xfrm4_dst_lookup() so that it works by calling a helper function __xfrm_dst_lookup() that takes an explicit flow key storage area as an argument. Use this new helper in xfrm4_get_saddr() so we can fetch the selected source address from the flow instead of from rt->rt_src Signed-off-by: -
David S. Miller authored
Use an explicit flow key and fetch it from there. Signed-off-by: -
David S. Miller authored
Flow key is available, so fetch it from there. Signed-off-by: -
David S. Miller authored
We already track and pass around the correct flow key, so simply use it in udp_send_skb(). Signed-off-by: -
David S. Miller authored
On input packets, rt->rt_src always equals ip_hdr(skb)->saddr Anything that mangles or otherwise changes the IP header must relookup the route found at skb_rtable(). Therefore this invariant must always hold true. Signed-off-by: -
David S. Miller authored
This eliminates an access to rt->rt_src. Signed-off-by: -
Allan Stephens authored
Revises the algorithm governing the sending of link request messages to take into account the number of nodes each bearer is currently in contact with, and to ensure more rapid rediscovery of neighboring nodes if a bearer fails and then recovers. The discovery object now sends requests at least once a second if it is not in contact with any other nodes, and at least once a minute if it has at least one neighbor; if contact with the only neighbor is lost, the object immediately reverts to its initial rapid-fire search timing to accelerate the rediscovery process. In addition, the discovery object now stops issuing link request messages if it is in contact with the only neighboring node it is configured to communicate with, since further searching is unnecessary. Signed-off-by:
Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Augments TIPC's discovery object to track the number of neighboring nodes having an active link to the associated bearer. This means tipc_disc_update_link_req() becomes either one of: tipc_disc_add_dest() or: tipc_disc_remove_dest() depending on the code flow direction of things. Signed-off-by: -
Allan Stephens authored
Augments TIPC's discovery object to send its initial neighbor discovery request message as soon as the associated bearer is created, rather than waiting for its first periodic timeout to occur, thereby speeding up the discovery process. Also adds a check to suppress the initial request or subsequent requests if the bearer is blocked at the time the request is scheduled for transmission. Signed-off-by:
-
Allan Stephens authored
Modifies bearer creation and deletion code to improve handling of scenarios when a neighbor discovery object cannot be created. The creation routine now aborts the creation of a bearer if its discovery object cannot be created, and deletes the newly created bearer, rather than failing quietly and leaving an unusable bearer hanging around. Since the exit via the goto label really isn't a definitive failure in all cases, relabel it appropriately. Signed-off-by:
-
Allan Stephens authored
Create a helper routine to enqueue a chain of sk_buffs to a link's transmit queue. It improves readability and the new function is anticipated to be used more than just once in the future as well. Signed-off-by:
-
Allan Stephens authored
Rework TIPC's message sending routines to take advantage of the total amount of data value passed to it by the kernel socket infrastructure. This change eliminates the need for TIPC to compute the size of outgoing messages itself, as well as the check for an oversize message in tipc_msg_build(). In addition, this change warrants an explanation: - res = send_packet(NULL, sock, &my_msg, 0); + res = send_packet(NULL, sock, &my_msg, bytes_to_send); Previously, the final argument to send_packet() was ignored (since the amount of data being sent was recalculated by a lower-level routine) and we could just pass in a dummy value (0). Now that the recalculation is being eliminated, the argument value being passed to send_packet() is significant and we have to supply the actual amount of data we want to send. Signed-off-by:
-
Allan Stephens authored
Adds checks to TIPC's socket send routines to promptly detect and abort attempts to send more than 66,000 bytes in a single TIPC message or more than 2**31-1 bytes in a single TIPC byte stream request. In addition, this ensures that the number of iovecs in a send request does not exceed the limits of a standard integer variable. Signed-off-by:
-
Allan Stephens authored
Enhances existing checks on the discovery domain associated with a TIPC bearer. A bearer can no longer be configured to accept links from itself only (which would be pointless), or to nodes outside its own cluster (since multi-cluster support has now been removed from TIPC). Also, the neighbor discovery routine now validates link setup requests against the configured discovery domain for the bearer, rather than simply ensuring the requesting node belongs to the node's own cluster. Signed-off-by:
-
Paul Gortmaker authored
This allows them to be available for easy re-use in other places and avoids trivial mistakes caused by "count the f's and 0's". Signed-off-by: -
Allan Stephens authored
Modifies a TIPC send routine that did not discard the outgoing sk_buff if it was not transmitted because of link congestion; this eliminates the potential for buffer leakage in the many callers who did not clean up the unsent buffer. (The two routines that previously did discard the unsent buffer have been updated to eliminate their now-redundant clean up.) Signed-off-by:
-
Allan Stephens authored
Sets the destination node field of an incoming multicast message to the receiving node's network address before handing off the message to each receiving port. This ensures that, in the event the destination port returns the message to the sender, the sender can identify which node the destination port belonged to. Signed-off-by:
-
Allan Stephens authored
Set the destination node and destination port fields of an outgoing multicast message header to zero; this is necessary to ensure that the receiving node can route the message properly if it was packed into a bundle due to link congestion. (Previously, there was a chance that the receiving node would send the unbundled message to a random node & port, rather than processing the message itself.) Signed-off-by:
-
Allan Stephens authored
Ensures that all outgoing data messages have the "name lookup scope" field of their header set correctly; that is, named multicast messages now specify cluster-wide name lookup, while messages not using TIPC naming zero out the lookup field. (Previously, the lookup scope specified for these types of messages was inherited from the last message sent by the sending port.) Signed-off-by:
-
Allan Stephens authored
Modifies the routine that fragments an existing message buffer to use similar logic to that used when generating fragments from an iovec. The routine now creates a complete chain of fragments and adds them to the link transmit queue as a unit, so that the link sends all fragments or none; this prevents the incomplete transmission of a fragmented message that might otherwise result because of link congestion or memory exhaustion. This change also ensures that the counter recording the number of fragmented messages sent by the link is now incremented only if the message is actually sent. Signed-off-by:
-
Allan Stephens authored
Eliminates code that restricts a link's counter of its fragmented messages to a 16-bit value, since the counter value is automatically restricted to this range when it is written into the message header. Signed-off-by:
-
