- 20 Nov, 2021 10 commits
-
-
Mina Almasry authored
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we bail out using "goto out_release_unlock;" in the cases where idx >= size, or !huge_pte_none(), the code will detect that new_pagecache_page == false, and so call restore_reserve_on_error(). In this case I see restore_reserve_on_error() delete the reservation, and the following call to remove_inode_hugepages() will increment h->resv_hugepages causing a 100% reproducible leak. We should treat the is_continue case similar to adding a page into the pagecache and set new_pagecache_page to true, to indicate that there is no reservation to restore on the error path, and we need not call restore_reserve_on_error(). Rename new_pagecache_page to page_in_pagecache to make that clear. Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com Fixes: c7b1850d ("hugetlb: don't pass page cache pages to restore_reserve_on_error") Signed-off-by:
Mina Almasry <almasrymina@google.com> Reported-by:
James Houghton <jthoughton@google.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Wei Xu <weixugc@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bui Quang Minh authored
When hugetlb_vm_op_open() is called during copy_vma(), we may take the reference to resv_map->css. Later, when clearing the reservation pointer of old_vma after transferring it to new_vma, we forget to drop the reference to resv_map->css. This leads to a reference leak of css. Fixes this by adding a check to drop reservation css reference in clear_vma_resv_huge_pages() Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com Fixes: 550a7d60 ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by:
Bui Quang Minh <minhquangbui99@gmail.com> Reviewed-by:
-
Rustam Kovhaev authored
When kmemleak is enabled for SLOB, system does not boot and does not print anything to the console. At the very early stage in the boot process we hit infinite recursion from kmemleak_init() and eventually kernel crashes. kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not valid for SLOB. Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com Fixes: d8843922 ("slab: Ignore internal flags in cache creation") Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
After building allmodconfig, there is an untracked vmlinux.lds file in arch/hexagon/kernel: $ git ls-files . --exclude-standard --others arch/hexagon/kernel/vmlinux.lds Ignore it as all other architectures have. Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.orgSigned-off-by:Nathan Chancellor <nathan@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Nathan Chancellor authored
When building allmodconfig, there is a warning about TIMER_ENABLE being redefined: drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined] #define TIMER_ENABLE BIT(7) ^ arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here #define TIMER_ENABLE 0 ^ 1 error generated. The values in this header are only used in one file each, if they are used at all. Remove the header and sink all of the constants into their respective files. TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in arch/hexagon/kernel/time.c. SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the file's introduction in commit 71e4a47f ("Hexagon: Add time and timer functions"). TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the definition, rather than its use. Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.orgSigned-off-by:Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
Patch series "Fixes for ARCH=hexagon allmodconfig", v2. This series fixes some issues noticed with ARCH=hexagon allmodconfig. This patch (of 3): When building ARCH=hexagon allmodconfig, the following errors occur: ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! Export these symbols so that modules can use them without any errors. Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org Fixes: 013bf24c ("Hexagon: Provide basic implementation and/or stubs for I/O routines.") Signed-off-by:
-
Yunfeng Ye authored
After the memory is freed, it can be immediately allocated by other CPUs, before the "free" trace report has been emitted. This causes inaccurate traces. For example, if the following sequence of events occurs: CPU 0 CPU 1 (1) alloc xxxxxx (2) free xxxxxx (3) alloc xxxxxx (4) free xxxxxx Then they will be inaccurately reported via tracing, so that they appear to have happened in this order: CPU 0 CPU 1 (1) alloc xxxxxx (2) alloc xxxxxx (3) free xxxxxx (4) free xxxxxx This makes it look like CPU 1 somehow managed to allocate memory that CPU 0 still had allocated for itself. In order to avoid this, emit the "free xxxxxx" tracing report just before the actual call to free the memory, instead of just after it. Link: https://lkml.kernel.org/r/374eb75d-7404-8721-4e1e-65b0e5b17279@huawei.comSigned-off-by:Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Alexander Mikhalitsyn authored
Currently, the exit_shm() function not designed to work properly when task->sysvshm.shm_clist holds shm objects from different IPC namespaces. This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it leads to use-after-free (reproducer exists). This is an attempt to fix the problem by extending exit_shm mechanism to handle shm's destroy from several IPC ns'es. To achieve that we do several things: 1. add a namespace (non-refcounted) pointer to the struct shmid_kernel 2. during new shm object creation (newseg()/shmget syscall) we initialize this pointer by current task IPC ns 3. exit_shm() fully reworked such that it traverses over all shp's in task->sysvshm.shm_clist and gets IPC namespace not from current task as it was before but from shp's object itself, then call shm_destroy(shp, ns). Note: We need to be really careful here, because as it was said before (1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we using special helper get_ipc_ns_not_zero() which allows to get IPC ns refcounter only if IPC ns not in the "state of destruction". Q/A Q: Why can we access shp->ns memory using non-refcounted pointer? A: Because shp object lifetime is always shorther than IPC namespace lifetime, so, if we get shp object from the task->sysvshm.shm_clist while holding task_lock(task) nobody can steal our namespace. Q: Does this patch change semantics of unshare/setns/clone syscalls? A: No. It's just fixes non-covered case when process may leave IPC namespace without getting task->sysvshm.shm_clist list cleaned up. Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: ab602f79 ("shm: make exit_shm work proportional to task activity") Co-developed-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alexander Mikhalitsyn authored
Patch series "shm: shm_rmid_forced feature fixes". Some time ago I met kernel crash after CRIU restore procedure, fortunately, it was CRIU restore, so, I had dump files and could do restore many times and crash reproduced easily. After some investigation I've constructed the minimal reproducer. It was found that it's use-after-free and it happens only if sysctl kernel.shm_rmid_forced = 1. The key of the problem is that the exit_shm() function not handles shp's object destroy when task->sysvshm.shm_clist contains items from different IPC namespaces. In most cases this list will contain only items from one IPC namespace. How can this list contain object from different namespaces? The exit_shm() function is designed to clean up this list always when process leaves IPC namespace. But we made a mistake a long time ago and did not add a exit_shm() call into the setns() syscall procedures. The first idea was just to add this call to setns() syscall but it obviously changes semantics of setns() syscall and that's userspace-visible change. So, I gave up on this idea. The first real attempt to address the issue was just to omit forced destroy if we meet shp object not from current task IPC namespace [1]. But that was not the best idea because task->sysvshm.shm_clist was protected by rwsem which belongs to current task IPC namespace. It means that list corruption may occur. Second approach is just extend exit_shm() to properly handle shp's from different IPC namespaces [2]. This is really non-trivial thing, I've put a lot of effort into that but not believed that it's possible to make it fully safe, clean and clear. Thanks to the efforts of Manfred Spraul working an elegant solution was designed. Thanks a lot, Manfred! Eric also suggested the way to address the issue in ("[RFC][PATCH] shm: In shm_exit destroy all created and never attached segments") Eric's idea was to maintain a list of shm_clists one per IPC namespace, use lock-less lists. But there is some extra memory consumption-related concerns. An alternative solution which was suggested by me was implemented in ("shm: reset shm_clist on setns but omit forced shm destroy"). The idea is pretty simple, we add exit_shm() syscall to setns() but DO NOT destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just clean up the task->sysvshm.shm_clist list. This chages semantics of setns() syscall a little bit but in comparision to the "naive" solution when we just add exit_shm() without any special exclusions this looks like a safer option. [1] https://lkml.org/lkml/2021/7/6/1108 [2] https://lkml.org/lkml/2021/7/14/736 This patch (of 2): Let's produce a warning if we trying to remove non-existing IPC object from IPC namespace kht/idr structures. This allows us to catch possible bugs when the ipc_rmid() function was called with inconsistent struct ipc_ids*, struct kern_ipc_perm* arguments. Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.comCo-developed-by: -
Matthew Wilcox authored
While free_unref_page_list() puts pages onto the CPU local LRU list, it does not remove them from the list they were passed in on. That makes the list_head appear to be non-empty, and would lead to various corruption problems if we didn't have an assertion that the list was empty. Reinitialise the list after calling free_unref_page_list() to avoid this problem. Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org Fixes: 988c69f1 ("mm: optimise put_pages_list()") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Steve French <stfrench@microsoft.com> Reported-by:
Namjae Jeon <linkinjeon@kernel.org> Tested-by:
-
- 19 Nov, 2021 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull libata fixes from Damien Le Moal: - Prevent accesses to unsupported log pages as that causes device scan failures with LLDDs using libsas (from me). - A couple of fixes for AMD AHCI adapters handling of low power modes and resume (from Mario). - Fix a compilation warning (from me). * tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Declare ata_ncq_sdev_attrs static ata: libahci: Adjust behavior when StorageD3Enable _DSD is set ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile ata: libata: add missing ata_identify_page_supported() calls ata: libata: improve ata_read_log_page() error message
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix double free in destroy_hist_field - Harden memset() of trace_iterator structure - Do not warn in trace printk check when test buffer fills up * tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Don't use out-of-sync va_list in event printing tracing: Use memset_startat() to zero struct trace_iterator tracing/histogram: Fix UAF in destroy_hist_field()
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the 'local_weight', 'weight' (memory access latency), 'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc' (pipeline stage cycles) sort key sample aggregation. - Fix 'perf test' entry for watchpoints on s/390. - Fix branch_stack entry endianness check in the 'perf test' sample parsing test. - Fix ARM SPE handling on 'perf inject'. - Fix memory leaks detected with ASan. - Fix build on arm64 related to reallocarray() availability. - Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable (futex_waitv). * tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf evsel: Fix memory leaks relating to unit perf report: Fix memory leaks around perf_tip() perf hist: Fix memory leak of a perf_hpp_fmt tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall tools build: Fix removal of feature-sync-compare-and-swap feature detection perf inject: Fix ARM SPE handling perf bench: Fix two memory leaks detected with ASan perf test sample-parsing: Fix branch_stack entry endianness check tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf sort: Fix the 'p_stage_cyc' sort key behavior perf sort: Fix the 'ins_lat' sort key behavior perf sort: Fix the 'weight' sort key behavior perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1 perf tests wp: Remove unused functions on s390 tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "I have two patches for 5.16: - allow external modules to be built against read-only source trees - turn KVM on in the defconfigs The second one isn't technically a fix, but it got tied up pending some defconfig cleanups that ended up finding some larger issues. I figured it'd be better to get the config changes some more testing, but didn't want to hold up turning KVM on for that" * tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix building external modules RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
-
Linus Torvalds authored
Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit-vs-signal handling fixes from Eric Biederman: "This is a small set of changes where debuggers were no longer able to intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit cleanups. This is essentially the change you suggested with all of i's dotted and the t's crossed so that ptrace can intercept all of the cases it has been able to intercept the past, and all of the cases that made it to exit without giving ptrace a chance still don't give ptrace a chance" * 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Replace force_fatal_sig with force_exit_sig when in doubt signal: Don't always set SA_IMMUTABLE for forced signals
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change to fix a regression in user space device state setting, which is used by the iscsi daemons to effect device recovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() scsi: ufs: core: Fix another task management completion race scsi: ufs: core: Fix task management completion timeout race scsi: core: sysfs: Fix hang when device state is set via sysfs scsi: iscsi: Unblock session then wake up error handler scsi: ufs: core: Improve SCSI abort handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "There are a few big regression items from the merge window suggesting that people are testing rc1's but not testing the for-next branches: - Warnings fixes - Crash in hf1 when creating QPs and setting counters - Some old mlx4 cards fail to probe due to missing counters - Syzkaller crash in the new counters code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update for VMware PVRDMA driver RDMA/nldev: Check stat attribute before accessing it RDMA/mlx4: Do not fail the registration on port stats IB/hfi1: Properly allocate rdma counter desc memory RDMA/core: Set send and receive CQ before forwarding to the driver RDMA/netlink: Add __maybe_unused to static inline in C file
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a coccicheck warning in gpio-virtio - fix gpio selftests build issues - fix a Kconfig issue in gpio-rockchip * tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors selftests: gpio: restore CFLAGS options selftests: gpio: fix uninitialised variable warning selftests: gpio: fix gpio compiling error gpio: virtio: remove unneeded semicolon
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This week's fixes, pretty quiet, about right for rc2. amdgpu is the bulk of them but the scheduler ones have been reported in a few places I think. Otherwise just some minor i915 fixes and a few other scattered around: scheduler: - two refcounting fixes cma-helper: - use correct free path for noncoherent efifb: - probing fix amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix i915: - return error handling fix - ADL-P display fix - TGL DSI display clocks fix nouveau: - infoframe corruption fix sun4i: - Kconfig fix" * tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/amdgpu: fix potential memleak drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors drm/amd/display: Fix OLED brightness control on eDP drm/amd/pm: Remove artificial freq level on Navi1x drm/amd/pm: avoid duplicate powergate/ungate setting drm/amdgpu: add error print when failing to add IP block(v2) drm/amd/pm: Enhanced reporting also for a stuck command drm/i915/guc: fix NULL vs IS_ERR() checking drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping" fbdev: Prevent probing generic drivers if a FB is already registered drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder drm/scheduler: fix drm_sched_job_add_implicit_dependencies drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY drm/cma-helper: Release non-coherent memory with dma_free_noncoherent() drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
-
Peter Zijlstra authored
When commit 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE") moved from stacktrace to native unwind_*() usage, the try_get_task_stack() got lost, leading to use-after-free issues for dying tasks. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Fixes: 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031 Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/Reported-by:
Justin Forbes <jmforbes@linuxtx.org> Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Eric W. Biederman authored
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by:
Kyle Huey <me@kylehuey.com> Reported-by:
kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da2 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27a ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d6 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5b ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.orgReviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Kyle Huey <khuey@kylehuey.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
Eric W. Biederman authored
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Update force_sig_to_task to support both the case when we can allow the debugger to intercept and possibly ignore the signal and the case when it is not safe to let userspace know about the signal until the process has exited. Suggested-by:
-
Bryan Tan authored
Update maintainer info for the VMware PVRDMA driver. Link: https://lore.kernel.org/r/1637320770-44878-1-git-send-email-bryantan@vmware.comReviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
Bryan Tan <bryantan@vmware.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Andreas Schwab authored
When building external modules, vdso_prepare should not be run. If the kernel sources are read-only, it will fail. Fixes: fde9c59a ("riscv: explicitly use symbol offsets for VDSO") Signed-off-by:
Andreas Schwab <schwab@suse.de> Reviewed-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
Anup Patel authored
Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module so that it always built along with the default kernel image. Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.16-2021-11-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-11-17: amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
A infoframe corruption fix for nouveau, a wrong free function usage fix for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for drm/scheduler refcounting and a probing fix for efifb. Signed-off-by:
-
Nikita Yushchenko authored
If trace_seq becomes full, trace_seq_vprintf() no longer consumes arguments from va_list, making va_list out of sync with format processing by trace_check_vprintf(). This causes va_arg() in trace_check_vprintf() to return wrong positional argument, which results into a WARN_ON_ONCE() hit. ftrace_stress_test from LTP triggers this situation. Fix it by explicitly avoiding further use if va_list at the point when it's consistency can no longer be guaranteed. Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.comSigned-off-by:
Nikita Yushchenko <nikita.yushchenko@virtuozzo.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() to avoid confusing memset() about writing beyond the target struct member. Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.orgSigned-off-by:
-
git://github.com/terrelln/linuxLinus Torvalds authored
Pull zstd fixes from Nick Terrell: "Fix stack usage on parisc & improve code size bloat This contains three commits: 1. Fixes a minor unused variable warning reported by Kernel test robot [0]. 2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining some functions that are unlikely to be used in performance sensitive workloads. 3. Fixes the reported excess stack usage on parisc [2] by removing -O3 from zstd's compilation flags. -O3 triggered bugs in the hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable: neutral compression, about -1% decompression speed. We also reduce code bloat (-105KB / 374KB). After this our code bloat is cut from 374KB to 105KB with gcc-11. If we wanted to cut the remaining 105KB we'd likely have to trade signicant performance, so I want to say that this is enough for now. We should be able to get further gains without sacrificing speed, but that will take some significant optimization effort, and isn't suitable for a quick fix. I've opened an upstream issue [3] to track the code size, and try to avoid future regressions, and improve it in the long term" Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0] Link: https://lkml.org/lkml/2021/11/15/710 [1] Link: https://lkml.org/lkml/2021/11/14/189 [2] Link: https://github.com/facebook/zstd/issues/2867 [3] Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/ * tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux: lib: zstd: Don't add -O3 to cflags lib: zstd: Don't inline functions in zstd_opt.c lib: zstd: Fix unused variable warning
-
- 18 Nov, 2021 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These fix the handling of thermal zones during system resume and disable building of the int340x thermal driver on 32-bit. Specifics: - Prevent the previous high and low thermal zone trip values from being retained over a system suspend-resume cycle (Manaf Meethalavalappu Pallikunhi) - Prevent the int340x thermal driver from being built in 32-bit kernel configurations, because running it on 32-bit is questionable (Arnd Bergmann)" * tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Reset previous low and high trip during thermal zone init thermal: int340x: Limit Kconfig to 64-bit -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a system-wide suspend issue in the DTPM framework and improve the Energy Model documentation. Specifics: - Fix system suspend handling in DTPM when it is enabled, but not actually used (Daniel Lezcano) - Describe the new cpufreq callback for Energy Model registration and explain the "advanced" and "simple" EM variants in the EM documentation (Lukasz Luba)" * tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: power: Describe 'advanced' and 'simple' EM models Documentation: power: Add description about new callback for EM registration powercap: DTPM: Fix suspend failure and kernel warning -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Revert the change attempting to release PM resources blocked by unused ACPI objects after device enumeration, because it caused boot issues to appear on multiple systems" * tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Release PM resources blocked by unused objects"
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Various build- and bug-fixes as well as one hardware-id addition" * tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: think-lmi: Abort probe on analyze failure platform/x86: dell-wmi-descriptor: disable by default platform/x86: samsung-laptop: Fix typo in a comment platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
-
Nick Terrell authored
After the update to zstd-1.4.10 passing -O3 is no longer necessary to get good performance from zstd. Using the default optimization level -O2 is sufficient to get good performance. I've measured no significant change to compression speed, and a ~1% decompression speed loss, which is acceptable. This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating stacks that are ~3KB. With -O2 these same functions generate stacks in the < 100B, completely fixing the problem. Function size deltas are listed below: ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68 ZSTD_compressBlock_fast: 2216 -> 40 ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64 ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76 ZSTD_fillDoubleHashTable: 3252 -> 0 ZSTD_compressBlock_doubleFast: 5856 -> 36 ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84 ZSTD_copmressBlock_lazy2: 2420 -> 72 Additionally, this improves the reported code bloat [1]. With gcc-11 bloat-o-meter shows an 80KB code size improvement: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190) Total: Before=6418562, After=6336372, chg -1.28% ``` Compared to before the zstd-1.4.10 update we see a total code size regression of 105KB, down from 374KB at v5.16-rc1: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522) Total: Before=6228850, After=6336372, chg +1.73% ``` [0] https://lkml.org/lkml/2021/11/15/710 [1] https://lkml.org/lkml/2021/11/14/189 Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Nick Terrell <terrelln@fb.com>
-
Nick Terrell authored
`zstd_opt.c` contains the match finder for the highest compression levels. These levels are already very slow, and are unlikely to be used in the kernel. If they are used, they shouldn't be used in latency sensitive workloads, so slowing them down shouldn't be a big deal. This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0]. I've also opened an issue upstream [1] so that we can properly tackle the code size issue in `zstd_opt.c` for all users, and can hopefully remove this hack in the next zstd version we import. Bloat-o-meter output on x86-64: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266) Function old new delta ZSTD_compressBlock_opt_generic.constprop - 7559 +7559 ZSTD_insertBtAndGetAllMatches - 6304 +6304 ZSTD_insertBt1 - 1731 +1731 ZSTD_storeSeq - 693 +693 ZSTD_BtGetAllMatches - 255 +255 ZSTD_updateRep - 128 +128 ZSTD_updateTree 96 99 +3 ZSTD_insertAndFindFirstIndexHash3 81 - -81 ZSTD_setBasePrices.constprop 98 - -98 ZSTD_litLengthPrice.constprop 138 - -138 ZSTD_count 362 181 -181 ZSTD_count_2segments 1407 938 -469 ZSTD_insertBt1.constprop 2689 - -2689 ZSTD_compressBlock_btultra2 19990 423 -19567 ZSTD_compressBlock_btultra 19633 15 -19618 ZSTD_initStats_ultra 19825 - -19825 ZSTD_compressBlock_btopt 20374 12 -20362 ZSTD_compressBlock_btopt_extDict 29984 12 -29972 ZSTD_compressBlock_btultra_extDict 30718 15 -30703 ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677 ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559 Total: Before=6611828, After=6418562, chg -2.92% ``` [0] https://lkml.org/lkml/2021/11/14/189 [1] https://github.com/facebook/zstd/issues/2862 Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/Reported-by:
-
Nick Terrell authored
The variable `litLengthSum` is only used by an `assert()`, so when asserts are disabled the compiler doesn't see any usage and warns. This issue is already fixed upstream by PR #2838 [0]. It was reported by the Kernel test robot in [1]. Another approach would be to change zstd's disabled `assert()` definition to use the argument in a disabled branch, instead of ignoring the argument. I've avoided this approach because there are some small changes necessary to get zstd to build, and I would want to thoroughly re-test for performance, since that is slightly changing the code in every function in zstd. It seems like a trivial change, but some functions are pretty sensitive to small changes. However, I think it is a valid approach that I would like to see upstream take, so I've opened Issue #2868 to attempt this upstream. Lastly, I've chosen not to use __maybe_unused because all code in lib/zstd/ must eventually be upstreamed. Upstream zstd can't use __maybe_unused because it isn't portable across all compilers. [0] https://github.com/facebook/zstd/pull/2838 [1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [2] https://github.com/facebook/zstd/issues/2868 Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
-
