Pull ARM driver updates from Arnd Bergmann:
 "There are minor updates to SoC specific drivers for chips by Rockchip,
  Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.

  Noteworthy driver changes include:

   - Several conversions of DT bindings to yaml format.

   - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.

   - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
     and support for more chips in the RPMh power domains and the
     soc-id.

   - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.

   - Apple M1 gains support for the on-chip NVMe controller, making it
     possible to finally use the internal disks. This also includes SoC
     drivers for their RTKit IPC and for the SART DMA address filter.

  For other subsystems that merge their drivers through the SoC tree, we
  have

   - Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
     SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
     now has a cache for firmware argument structures as an
     optimization, and SCMI now supports the 3.1 version of the
     specification.

   - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
     drivers

   - Memory controller updates for Tegra, and a few updates for other
     platforms"

* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
  memory: tegra: Add MC error logging on Tegra186 onward
  memory: tegra: Add memory controller channels support
  memory: tegra: Add APE memory clients for Tegra234
  memory: tegra: Add Tegra234 support
  nvme-apple: fix sparse endianess warnings
  soc/tegra: pmc: Document core domain fields
  soc: qcom: pdr: use static for servreg_* variables
  soc: imx: fix semicolon.cocci warnings
  soc: renesas: R-Car V3U is R-Car Gen4
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc/tegra: pmc: Select REGMAP
  dt-bindings: reset: st,sti-powerdown: Convert to yaml
  dt-bindings: reset: st,sti-picophyreset: Convert to yaml
  dt-bindings: reset: socfpga: Convert to yaml
  dt-bindings: reset: snps,axs10x-reset: Convert to yaml
  ...

Pull ARM DT updates from Arnd Bergmann:
 "There are 40 branches this time, adding a lot of new hardware support,
  and cleanups. Krzysztof Kozlowski continues his treewide cleanups.

  There are a number of new SoCs, all of them as part of existing
  families, and typically added along with a reference board:

   - Renesas RZ/G2UL (R9A07G043) is the single-core version of the
     RZ/G2L general-purpose MPU.

   - Renesas RZ/V2M (R9A09G011) is a smart camera SoC

   - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
     cores and deep learning accerlation.

   - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
     and dual Wifi-6.

   - Corstone1000 is a generic platform from Arm that is used for
     designing custom SoCs, the support for now is for the Fixed Virtual
     Platform emulation for it.

   - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
     upcoming Chromebooks.

   - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
     MMU-less SoC to be added in a while

  New machines based on already supported SoCs this time are mainly for
  32-bit platforms and include:

   - Two wireless routers based on Broadcom bcm4708

   - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
     for the industrial embedded market, and on NXP LS1021A based IOT
     board.

   - Two ethernet switches based on Microchip LAN966

   - Eight Qualcomm Snapdragon based machines, including a smartwatch, a
     Chromebook board and some phones

   - Another phone based on the old ST-Ericsson Ux500 platform

   - Seven STM32MP1 based boards

   - Four single-board computers based on Rockchip RK3566/RK3568"

* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
  ARM: dts: kswitch-d10: enable networking
  ARM: dts: lan966x: add switch node
  ARM: dts: lan966x: add serdes node
  ARM: dts: lan966x: add reset switch reset node
  ARM: dts: lan966x: add MIIM nodes
  ARM: dts: lan966x: add hwmon node
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: rename pinctrl nodes
  ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: turris-omnia: Add atsha204a node
  arm64: dts: mt8192: Follow binding order for SCP registers
  arm64: dts: mediatek: add mtk-snfi for mt7622
  arm64: dts: mediatek: mt8195-demo: enable uart1
  ...

Pull 32-bit ARM SoC updates from Arnd Bergmann:
 "These updates are for platform specific code in arch/arm/, mostly
  fixing minor issues.

  The at91 platform gains support for better power management on the
  lan966 platform and new firmware on the sama5 platform. The mediatek
  soc drivers in turn are enabled for the new mt8195 SoC"

* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: at91: debug: add lan966 support
  ARM: at91: pm: add support for sama5d2 secure suspend
  ARM: at91: add code to handle secure calls
  ARM: at91: Kconfig: implement PIT64B selection
  ARM: at91: pm: add quirks for pm
  ARM: at91: pm: use kernel documentation style
  ARM: at91: pm: introduce macros for pm mode replacement
  ARM: at91: pm: keep documentation inline with structure members
  orion5x: fix typos in comments
  ARM: hisi: Add missing of_node_put after of_find_compatible_node
  ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
  ARM: shmobile: Drop commas after dt_compat sentinels
  soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
  MAINTAINERS: Add Broadcom BCMBCA entry
  arm: bcmbca: add arch bcmbca machine entry
  MAINTAINERS: Broadcom internal lists aren't maintainers
  dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
  soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
  soc: mediatek: add mtk-mutex support for mt8195 vdosys0
  soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
  ...

Use try_cmpxchg64 instead of cmpxchg64 in CMPXCHG_LOOP macro.
x86 CMPXCHG instruction returns success in ZF flag, so this
change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg). The main loop of lockref_get improves from:

  13:	48 89 c1             	mov    %rax,%rcx
  16:	48 c1 f9 20          	sar    $0x20,%rcx
  1a:	83 c1 01             	add    $0x1,%ecx
  1d:	48 89 ce             	mov    %rcx,%rsi
  20:	89 c1                	mov    %eax,%ecx
  22:	48 89 d0             	mov    %rdx,%rax
  25:	48 c1 e6 20          	shl    $0x20,%rsi
  29:	48 09 f1             	or     %rsi,%rcx
  2c:	f0 48 0f b1 4d 00    	lock cmpxchg %rcx,0x0(%rbp)
  32:	48 39 d0             	cmp    %rdx,%rax
  35:	75 17                	jne    4e <lockref_get+0x4e>

to:

  13:	48 89 ca             	mov    %rcx,%rdx
  16:	48 c1 fa 20          	sar    $0x20,%rdx
  1a:	83 c2 01             	add    $0x1,%edx
  1d:	48 89 d6             	mov    %rdx,%rsi
  20:	89 ca                	mov    %ecx,%edx
  22:	48 c1 e6 20          	shl    $0x20,%rsi
  26:	48 09 f2             	or     %rsi,%rdx
  29:	f0 48 0f b1 55 00    	lock cmpxchg %rdx,0x0(%rbp)
  2f:	75 02                	jne    33 <lockref_get+0x33>

[ Michael Ellerman and Mark Rutland confirm that code generation on
  powerpc and arm64 respectively is also ok, even though they do not
  have a native arch_try_cmpxchg() implementation, and rely on the
  default fallback case    - Linus ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: paulmck@linux.vnet.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Dave Chinner:
 "This is a big update with lots of new code. The summary below them
  all, so I'll just touch on teh higlights. The two main new features
  are Large Extent Counts and Logged Attribute Replay - these are two
  new foundational features that we are building more complex future
  features on top of.

  For upcoming functionality, we need to be able to store hundreds of
  millions of xattrs per inode. The Large Extent Count feature removes
  the limits that prevent this scale of xattr storage, and while we were
  modifying the on disk extent count format we also increased the number
  of data extents we support per inode from 2^32 to 2^47.

  We also need to be able to modify xattrs as part of larger atomic
  transactions rather than as standalone transactions. The Logged
  Attribute Replay feature introduces the infrastructure that allows us
  to use intents to record the attribute modifications in the journal
  before we start them, hence allowing other atomic transactions to log
  attribute modification intents and then defer the actual modification
  to later. If we then crash, log recovery then guarantees that the
  attribute is replayed in the context of the atomic transaction that
  logged the intent.

  A significant chunk of the commits in this merge are for the base
  attribute replay functionality along with fixes, improvements and
  cleanups related to this new functioanlity. Allison deserves a big
  round of thanks for her ongoing work to get this functionality into
  XFS.

  There are also many other smaller changes and improvements, so overall
  this is one of the bigger XFS merge requests in some time.

  I will be following up next week with another smaller pull request -
  we already have another round of fixes and improvements to the logged
  attribute replay functionality just about ready to go. They'll soak
  and test over the next week, and I'll send a pull request for them
  near the end of the merge window.

  Summary:

   - support for printk message indexing.

   - large extent counts to provide support for up to 2^47 data extents
     and 2^32 attribute extents, allowing us to scale beyond 4 billion
     data extents to billions of xattrs per inode.

   - conversion of various flags fields to be consistently declared as
     unsigned bit fields.

   - improvements to realtime extent accounting and converts them to
     per-cpu counters to match all the other block and inode accounting.

   - reworks core log formatting code to reduce iterations, have a
     shorter, cleaner fast path and generally be easier to understand
     and maintain.

   - improvements to rmap btree searches that reduce overhead by up to
     30% resulting in xfs_scrub runtime reductions of 15%.

   - improvements to reflink that remove the size limitations in
     remapping operations and greatly reduce the size of transaction
     reservations.

   - reworks the minimum log size calculations to allow us to change
     transaction reservations without changing the minimum supported log
     size.

   - removal of quota warning support as it has never been used on
     Linux.

   - intent whiteouts to allow us to cancel intents that are completed
     entirely in memory rather than having use CPU and disk bandwidth
     formatting and writing them into the journal when it is not
     necessary. This makes rmap, reflink and extent freeing slightly
     more efficient, but provides massive improvements for....

   - Logged Attribute Replay feature support. This is a fundamental
     change to the way we modify attributes, laying the foundation for
     future integration of attribute modifications as part of other
     atomic transactional operations the filesystem performs.

   - Lots of cleanups and fixes for the logged attribute replay
     functionality"

* tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (124 commits)
  xfs: can't use kmem_zalloc() for attribute buffers
  xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify
  xfs: ATTR_REPLACE algorithm with LARP enabled needs rework
  xfs: use XFS_DA_OP flags in deferred attr ops
  xfs: remove xfs_attri_remove_iter
  xfs: switch attr remove to xfs_attri_set_iter
  xfs: introduce attr remove initial states into xfs_attr_set_iter
  xfs: xfs_attr_set_iter() does not need to return EAGAIN
  xfs: clean up final attr removal in xfs_attr_set_iter
  xfs: remote xattr removal in xfs_attr_set_iter() is conditional
  xfs: XFS_DAS_LEAF_REPLACE state only needed if !LARP
  xfs: split remote attr setting out from replace path
  xfs: consolidate leaf/node states in xfs_attr_set_iter
  xfs: kill XFS_DAC_LEAF_ADDNAME_INIT
  xfs: separate out initial attr_set states
  xfs: don't set quota warning values
  xfs: remove warning counters from struct xfs_dquot_res
  xfs: remove quota warning limit from struct xfs_quota_limits
  xfs: rework deferred attribute operation setup
  xfs: make xattri_leaf_bp more useful
  ...

Pull fsnotify updates from Jan Kara:
 "The biggest part of this is support for fsnotify inode marks that
  don't pin inodes in memory but rather get evicted together with the
  inode (they are useful if userspace needs to exclude receipt of events
  from potentially large subtrees using fanotify ignore marks).

  There is also a fix for more consistent handling of events sent to
  parent and a fix of sparse(1) complaints"

* tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: fix incorrect fmode_t casts
  fsnotify: consistent behavior for parent not watching children
  fsnotify: introduce mark type iterator
  fanotify: enable "evictable" inode marks
  fanotify: use fsnotify group lock helpers
  fanotify: implement "evictable" inode marks
  fanotify: factor out helper fanotify_mark_update_flags()
  fanotify: create helper fanotify_mark_user_flags()
  fsnotify: allow adding an inode mark without pinning inode
  dnotify: use fsnotify group lock helpers
  nfsd: use fsnotify group lock helpers
  audit: use fsnotify group lock helpers
  inotify: use fsnotify group lock helpers
  fsnotify: create helpers for group mark_mutex lock
  fsnotify: make allow_dups a property of the group
  fsnotify: pass flags argument to fsnotify_alloc_group()
  fsnotify: fix wrong lockdep annotations
  inotify: move control flags from mask to mark flags
  inotify: show inotify mask flags in proc fdinfo

Pull writeback and ext2 cleanups from Jan Kara:
 "One small ext2 cleanup and one writeback spelling fix"

* tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: fix typo in comment
  fs: ext2: Fix duplicate included linux/dax.h

Pull dma-mapping updates from Christoph Hellwig:

 - don't over-decrypt memory (Robin Murphy)

 - takes min align mask into account for the swiotlb max mapping size
   (Tianyu Lan)

 - use GFP_ATOMIC in dma-debug (Mikulas Patocka)

 - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)

 - don't fail on highmem CMA pages in dma_direct_alloc_pages (me)

 - cleanup swiotlb initialization and share more code with swiotlb-xen
   (me, Stefano Stabellini)

* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
  dma-direct: don't over-decrypt memory
  swiotlb: max mapping size takes min align mask into account
  swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
  swiotlb: use the right nslabs value in swiotlb_init_remap
  swiotlb: don't panic when the swiotlb buffer can't be allocated
  dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
  dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
  swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
  x86: remove cruft from <asm/dma-mapping.h>
  swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
  swiotlb: merge swiotlb-xen initialization into swiotlb
  swiotlb: provide swiotlb_init variants that remap the buffer
  swiotlb: pass a gfp_mask argument to swiotlb_init_late
  swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
  swiotlb: make the swiotlb_init interface more useful
  x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
  x86: remove the IOMMU table infrastructure
  MIPS/octeon: use swiotlb_init instead of open coding it
  arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
  swiotlb: rename swiotlb_late_init_with_default_size
  ...

Pull SCSI updates from James Bottomley:
 "This consists of a small set of driver updates (lpfc, ufs, mpt3sas
  mpi3mr, iscsi target). Apart from that this is mostly small fixes with
  very few core changes (the biggest one being VPD caching)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
  scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
  scsi: elx: efct: Remove NULL check after calling container_of()
  scsi: dpt_i2o: Drop redundant spinlock initialization
  scsi: qedf: Remove redundant variable op
  scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
  scsi: fnic: Replace DMA mask of 64 bits with 47 bits
  scsi: mpi3mr: Add target device related sysfs attributes
  scsi: mpi3mr: Add shost related sysfs attributes
  scsi: elx: efct: Remove redundant memset() statement
  scsi: megaraid_sas: Remove redundant memset() statement
  scsi: mpi3mr: Return error if dma_alloc_coherent() fails
  scsi: hisi_sas: Fix rescan after deleting a disk
  scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
  scsi: libsas: Refactor sas_ata_hard_reset()
  scsi: mpt3sas: Update driver version to 42.100.00.00
  scsi: mpt3sas: Fix junk chars displayed while printing ChipName
  scsi: ipr: Use kobj_to_dev()
  scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
  scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
  scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
  ...

Pull sound updates from Takashi Iwai:
 "Not much dramatic changes at this time, but we've received quite a lot
  of changes for ASoC, while there are still a few fixes and quirks for
  usual HD- and USB-auido. Here are some highlights.

  ASoC:

   - Overhaul of endianness specification for data formats, avoiding
     needless restrictions due to CODECs

   - Initial stages of Intel AVS driver merge

   - Introduction of v4 IPC mechanism for SOF

   - TDM mode support for AK4613

   - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
     MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
     nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780

  Others:

   - A few regression fixes after the USB-audio endpoint management
     refactoring

   - More enhancements for Cirrus HD-audio codec support (still ongoing)

   - Addition of generic serial MIDI driver"

* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
  ALSA: hda/realtek - Add new type for ALC245
  ALSA: usb-audio: Configure sync endpoints before data
  ALSA: ctxfi: fix typo in comment
  ALSA: cs5535audio: fix typo in comment
  ALSA: ctxfi: Add SB046x PCI ID
  ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
  ALSA: usb-audio: Workaround for clock setup on TEAC devices
  ALSA: lola: Bounds check loop iterator against streams array size
  ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
  ASoC: rt1308-sdw: add the default value of register 0xc320
  ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
  ASoC: rt9120: Fix 3byte read, valule offset typo
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
  ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
  ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
  ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
  ASoC: SOF: mediatek: remove duplicate include in mt8195.c
  ASoC: SOF: mediatek: Add mt8195 debug dump
  ASoC: SOF: mediatek: Add mediatek common debug dump
  ...

Pull drm updates from Dave Airlie:
 "Intel have enabled DG2 on certain SKUs for laptops, AMD has started
  some new GPU support, msm has user allocated VA controls

  dma-buf:
   - add dma_resv_replace_fences
   - add dma_resv_get_singleton
   - make dma_excl_fence private

  core:
   - EDID parser refactorings
   - switch drivers to drm_mode_copy/duplicate
   - DRM managed mutex initialization

  display-helper:
   - put HDMI, SCDC, HDCP, DSC and DP into new module

  gem:
   - rework fence handling

  ttm:
   - rework bulk move handling
   - add common debugfs for resource managers
   - convert to kvcalloc

  format helpers:
   - support monochrome formats
   - RGB888, RGB565 to XRGB8888 conversions

  fbdev:
   - cfb/sys_imageblit fixes
   - pagelist corruption fix
   - create offb platform device
   - deferred io improvements

  sysfb:
   - Kconfig rework
   - support for VESA mode selection

  bridge:
   - conversions to devm_drm_of_get_bridge
   - conversions to panel_bridge
   - analogix_dp - autosuspend support
   - it66121 - audio support
   - tc358767 - DSI to DPI support
   - icn6211 - PLL/I2C fixes, DT property
   - adv7611 - enable DRM_BRIDGE_OP_HPD
   - anx7625 - fill ELD if no monitor
   - dw_hdmi - add audio support
   - lontium LT9211 support, i.MXMP LDB
   - it6505: Kconfig fix, DPCD set power fix
   - adv7511 - CEC support for ADV7535

  panel:
   - ltk035c5444t, B133UAN01, NV3052C panel support
   - DataImage FG040346DSSWBG04 support
   - st7735r - DT bindings fix
   - ssd130x - fixes

  i915:
   - DG2 laptop PCI-IDs ("motherboard down")
   - Initial RPL-P PCI IDs
   - compute engine ABI
   - DG2 Tile4 support
   - DG2 CCS clear color compression support
   - DG2 render/media compression formats support
   - ATS-M platform info
   - RPL-S PCI IDs added
   - Bump ADL-P DMC version to v2.16
   - Support static DRRS
   - Support multiple eDP/LVDS native mode refresh rates
   - DP HDR support for HSW+
   - Lots of display refactoring + fixes
   - GuC hwconfig support and query
   - sysfs support for multi-tile
   - fdinfo per-client gpu utilisation
   - add geometry subslices query
   - fix prime mmap with LMEM
   - fix vm open count and remove vma refcounts
   - contiguous allocation fixes
   - steered register write support
   - small PCI BAR enablement
   - GuC error capture support
   - sunset igpu legacy mmap support for newer devices
   - GuC version 70.1.1 support

  amdgpu:
   - Initial SoC21 support
   - SMU 13.x enablement
   - SMU 13.0.4 support
   - ttm_eu cleanups
   - USB-C, GPUVM updates
   - TMZ fixes for RV
   - RAS support for VCN
   - PM sysfs code cleanup
   - DC FP rework
   - extend CG/PG flags to 64-bit
   - SI dpm lockdep fix
   - runtime PM fixes

  amdkfd:
   - RAS/SVM fixes
   - TLB flush fixes
   - CRIU GWS support
   - ignore bogus MEC signals more efficiently

  msm:
   - Fourcc modifier for tiled but not compressed layouts
   - Support for userspace allocated IOVA (GPU virtual address)
   - DPU: DSC (Display Stream Compression) support
   - DP: eDP support
   - DP: conversion to use drm_bridge and drm_bridge_connector
   - Merge DPU1 and MDP5 MDSS driver
   - DPU: writeback support

  nouveau:
   - make some structures static
   - make some variables static
   - switch to drm_gem_plane_helper_prepare_fb

  radeon:
   - misc fixes/cleanups

  mxsfb:
   - rework crtc mode setting
   - LCDIF CRC support

  etnaviv:
   - fencing improvements
   - fix address space collisions
   - cleanup MMU reference handling

  gma500:
   - GEM/GTT improvements
   - connector handling fixes

  komeda:
   - switch to plane reset helper

  mediatek:
   - MIPI DSI improvements

  omapdrm:
   - GEM improvements

  qxl:
   - aarch64 support

  vc4:
   - add a CL submission tracepoint
   - HDMI YUV support
   - HDMI/clock improvements
   - drop is_hdmi caching

  virtio:
   - remove restriction of non-zero blob types

  vmwgfx:
   - support for cursormob and cursorbypass 4
   - fence improvements

  tidss:
   - reset DISPC on startup

  solomon:
   - SPI support
   - DT improvements

  sun4i:
   - allwinner D1 support
   - drop is_hdmi caching

  imx:
   - use swap() instead of open-coding
   - use devm_platform_ioremap_resource
   - remove redunant initializations

  ast:
   - Displayport support

  rockchip:
   - Refactor IOMMU initialisation
   - make some structures static
   - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
   - support swapped YUV formats,
   - clock improvements
   - rk3568 support
   - VOP2 support

  mediatek:
   - MT8186 support

  tegra:
   - debugabillity improvements"

* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
  drm/i915/dsi: fix VBT send packet port selection for ICL+
  drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
  drm/i915/reg: fix undefined behavior due to shift overflowing the constant
  drm/i915/gt: Fix use of static in macro mismatch
  drm/i915/audio: fix audio code enable/disable pipe logging
  drm/i915: Fix CFI violation with show_dynamic_id()
  drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
  drm/i915/gt: Fix build error without CONFIG_PM
  drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
  drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
  drm/msm: don't free the IRQ if it was not requested
  drm/msm/dpu: limit writeback modes according to max_linewidth
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/amdgpu: Unmap legacy queue when MES is enabled
  drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
  drm/msm: Fix fb plane offset calculation
  drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
  drm/msm/dsi: don't powerup at modeset time for parade-ps8640
  drm/rockchip: Change register space names in vop2
  dt-bindings: display: rockchip: make reg-names mandatory for VOP2
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
     qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
     props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
     Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
     fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
     zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers

   - Convert various Arm Ltd peripheral IP bindings to schemas

   - New bindings for Menlo board CPLD, DH electronics board CPLD,
     Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
     GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
     Microchip/SMSC LAN95xx USB Ethernet controllers

   - Add vendor prefix for Enclustra

   - Add various compatible string additions

   - Various example fixes and cleanups

   - Remove unused hisilicon,hi6220-reset binding

   - Treewide fix properties missing type definition

   - Drop some empty and unreferenced .txt bindings

   - Documentation improvements for writing schemas

  DT driver core:

   - Drop static IRQ resources for DT platform devices as IRQ setup is
     dynamic and drivers have all been converted to use
     platform_get_irq() and friends

   - Rework memory allocations and frees for overlays

   - Continue overlay notifier callbacks on successful calls and add
     unittests

   - Handle 'interrupts-extended' in early DT IRQ setup

   - Fix of_property_read_string() errors to match documentation

   - Ignore disabled nodes in FDT API calls"

* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
  of/irq: fix typo in comment
  dt-bindings: Fix properties without any type
  Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
  dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
  dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
  dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
  dt-bindings: timer: cdns,ttc: drop unneeded minItems
  dt-bindings: mailbox: zynqmp_ipi: convert to yaml
  dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  dt-bindings: net: add schema for ASIX USB Ethernet controllers
  of/fdt: Ignore disabled memory nodes
  dt-bindings: arm: fix typos in compatible
  dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
  dt-bindings: display: convert Arm Komeda to DT schema
  dt-bindings: display: convert Arm Mali-DP to DT schema
  dt-bindings: display: convert Arm HDLCD to DT schema
  dt-bindings: display: convert PL110/PL111 to DT schema
  dt-bindings: arm: convert vexpress-config to DT schema
  dt-bindings: arm: convert vexpress-sysregs to DT schema
  ...

Merge tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Intel PT:

   - Allow hardware tracing on KVM test programs. In this case, the VM
     is not running an OS, but only the functions loaded into it by the
     hypervisor test program, and conveniently, loaded at the same
     virtual addresses.

   - Improve documentation:
      - Add link to perf wiki's page

   - Cleanups:
      - Delete now unused perf-with-kcore.sh script
      - Remove unused machines__find_host()

  ARM SPE (Statistical Profile Extensions):

   - Add man page entry.

  Vendor Events:

   - Update various Intel event topics

   - Update various microarch events

   - Fix various cstate metrics

   - Fix Alderlake metric groups

   - Add sapphirerapids events

   - Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75,
     A77, A78, A710, X1, X2 and Neoverse E1

   - Update Cortex A57/A72

  perf stat:

   - Introduce stats for the user and system rusage times

  perf c2c:

   - Prep work to support ARM systems

  perf annotate:

   - Add --percent-limit option

  perf lock:

   - Add -t/--thread option for report

   - Do not discard broken lock stats

  perf bench:

   - Add breakpoint benchmarks

  perf test:

   - Limit to only run executable scripts in tests

   - Add basic perf record tests

   - Add stat record+report test

   - Add basic stat and topdown group test

   - Skip several tests when the user hasn't permission to perform them

   - Fix test case 81 ("perf record tests") on s390x

  perf version:

   - debuginfod support improvements

  perf scripting python:

   - Expose symbol offset and source information

  perf build:

   - Error for BPF skeletons without LIBBPF

   - Use Python devtools for version autodetection rather than runtime

  Miscellaneous:

   - Add riscv64 support to 'perf jitdump'

   - Various fixes/tidy ups related to cpu_map

   - Fixes for handling Intel hybrid systems"

* tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits)
  perf intel-pt: Add guest_code support
  perf kvm report: Add guest_code support
  perf script: Add guest_code support
  perf tools: Add guest_code support
  perf tools: Factor out thread__set_guest_comm()
  perf tools: Add machine to machines back pointer
  perf vendors events arm64: Update Cortex A57/A72
  perf vendors events arm64: Arm Neoverse E1
  perf vendors events arm64: Arm Cortex-X2
  perf vendors events arm64: Arm Cortex-X1
  perf vendors events arm64: Arm Cortex-A710
  perf vendors events arm64: Arm Cortex-A78
  perf vendors events arm64: Arm Cortex-A77
  perf vendors events arm64: Arm Cortex-A75
  perf vendors events arm64: Arm Cortex-A73
  perf vendors events arm64: Arm Cortex-A65
  perf vendors events arm64: Arm Cortex-A510
  perf vendors events arm64: Arm Cortex-A55
  perf vendors events arm64: Arm Cortex-A35
  perf vendors events arm64: Arm Cortex-A34
  ...

Merge tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull checkpatch update from Gustavo Silva:
 "kvmalloc() and kvzalloc() functions have now 2-factor multiplication
  argument forms kvmalloc_array() and kvcalloc().

  Add alloc-with-multiplies checks for these new functions"

* tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  checkpatch: add new alloc functions to alloc with multiplies check

Merge tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull misc hardening updates from Gustavo Silva:
 "Replace a few open-coded instances with size_t saturating arithmetic
  helpers"

* tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  virt: acrn: Prefer array_size and struct_size over open coded arithmetic
  afs: Prefer struct_size over open coded arithmetic

Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wstringop-overflow fixes from Gustavo Silva:
 "Fix some -Wstringop-overflow warnings when building with GCC-11. All
  the patches have been in linux-next during the last development cycle.

  This is part of the ongoing efforts to globally enable
  -Wstringop-overflow"

* tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()
  drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c
  scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Support TCPv6 segmentation offload with super-segments larger than
     64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

   - Generalize skb freeing deferral to per-cpu lists, instead of
     per-socket lists.

   - Add a netdev statistic for packets dropped due to L2 address
     mismatch (rx_otherhost_dropped).

   - Continue work annotating skb drop reasons.

   - Accept alternative netdev names (ALT_IFNAME) in more netlink
     requests.

   - Add VLAN support for AF_PACKET SOCK_RAW GSO.

   - Allow receiving skb mark from the socket as a cmsg.

   - Enable memcg accounting for veth queues, sysctl tables and IPv6.

  BPF
  ---

   - Add libbpf support for User Statically-Defined Tracing (USDTs).

   - Speed up symbol resolution for kprobes multi-link attachments.

   - Support storing typed pointers to referenced and unreferenced
     objects in BPF maps.

   - Add support for BPF link iterator.

   - Introduce access to remote CPU map elements in BPF per-cpu map.

   - Allow middle-of-the-road settings for the
     kernel.unprivileged_bpf_disabled sysctl.

   - Implement basic types of dynamic pointers e.g. to allow for
     dynamically sized ringbuf reservations without extra memory copies.

  Protocols
  ---------

   - Retire port only listening_hash table, add a second bind table
     hashed by port and address. Avoid linear list walk when binding to
     very popular ports (e.g. 443).

   - Add bridge FDB bulk flush filtering support allowing user space to
     remove all FDB entries matching a condition.

   - Introduce accept_unsolicited_na sysctl for IPv6 to implement
     router-side changes for RFC9131.

   - Support for MPTCP path manager in user space.

   - Add MPTCP support for fallback to regular TCP for connections that
     have never connected additional subflows or transmitted
     out-of-sequence data (partial support for RFC8684 fallback).

   - Avoid races in MPTCP-level window tracking, stabilize and improve
     throughput.

   - Support lockless operation of GRE tunnels with seq numbers enabled.

   - WiFi support for host based BSS color collision detection.

   - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

   - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

   - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

   - Allow matching on the number of VLAN tags via tc-flower.

   - Add tracepoint for tcp_set_ca_state().

  Driver API
  ----------

   - Improve error reporting from classifier and action offload.

   - Add support for listing line cards in switches (devlink).

   - Add helpers for reporting page pool statistics with ethtool -S.

   - Add support for reading clock cycles when using PTP virtual clocks,
     instead of having the driver convert to time before reporting. This
     makes it possible to report time from different vclocks.

   - Support configuring low-latency Tx descriptor push via ethtool.

   - Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

  New hardware / drivers
  ----------------------

   - Ethernet:
      - Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
      - Sunplus SP7021 SoC (sp7021_emac)
      - Add support for Renesas RZ/V2M (in ravb)
      - Add support for MediaTek mt7986 switches (in mtk_eth_soc)

   - Ethernet PHYs:
      - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
      - TI DP83TD510 PHY
      - Microchip LAN8742/LAN88xx PHYs

   - WiFi:
      - Driver for pureLiFi X, XL, XC devices (plfxlc)
      - Driver for Silicon Labs devices (wfx)
      - Support for WCN6750 (in ath11k)
      - Support Realtek 8852ce devices (in rtw89)

   - Mobile:
      - MediaTek T700 modems (Intel 5G 5000 M.2 cards)

   - CAN:
      - ctucanfd: add support for CTU CAN FD open-source IP core from
        Czech Technical University in Prague

  Drivers
  -------

   - Delete a number of old drivers still using virt_to_bus().

   - Ethernet NICs:
      - intel: support TSO on tunnels MPLS
      - broadcom: support multi-buffer XDP
      - nfp: support VF rate limiting
      - sfc: use hardware tx timestamps for more than PTP
      - mlx5: multi-port eswitch support
      - hyper-v: add support for XDP_REDIRECT
      - atlantic: XDP support (including multi-buffer)
      - macb: improve real-time perf by deferring Tx processing to NAPI

   - High-speed Ethernet switches:
      - mlxsw: implement basic line card information querying
      - prestera: add support for traffic policing on ingress and egress

   - Embedded Ethernet switches:
      - lan966x: add support for packet DMA (FDMA)
      - lan966x: add support for PTP programmable pins
      - ti: cpsw_new: enable bc/mc storm prevention

   - Qualcomm 802.11ax WiFi (ath11k):
      - Wake-on-WLAN support for QCA6390 and WCN6855
      - device recovery (firmware restart) support
      - support setting Specific Absorption Rate (SAR) for WCN6855
      - read country code from SMBIOS for WCN6855/QCA6390
      - enable keep-alive during WoWLAN suspend
      - implement remain-on-channel support

   - MediaTek WiFi (mt76):
      - support Wireless Ethernet Dispatch offloading packet movement
        between the Ethernet switch and WiFi interfaces
      - non-standard VHT MCS10-11 support
      - mt7921 AP mode support
      - mt7921 IPv6 NS offload support

   - Ethernet PHYs:
      - micrel: ksz9031/ksz9131: cabletest support
      - lan87xx: SQI support for T1 PHYs
      - lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
  ptp: ocp: Add firmware header checks
  ptp: ocp: fix PPS source selector debugfs reporting
  ptp: ocp: add .init function for sma_op vector
  ptp: ocp: vectorize the sma accessor functions
  ptp: ocp: constify selectors
  ptp: ocp: parameterize input/output sma selectors
  ptp: ocp: revise firmware display
  ptp: ocp: add Celestica timecard PCI ids
  ptp: ocp: Remove #ifdefs around PCI IDs
  ptp: ocp: 32-bit fixups for pci start address
  Revert "net/smc: fix listen processing for SMC-Rv2"
  ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
  selftests/bpf: Dynptr tests
  bpf: Add dynptr data slices
  bpf: Add bpf_dynptr_read and bpf_dynptr_write
  bpf: Dynptr support for ring buffers
  bpf: Add bpf_dynptr_from_mem for local dynptrs
  bpf: Add verifier support for dynptrs
  bpf: Suppress 'passing zero to PTR_ERR' warning
  bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
  ...

Pull workqueue update from Tejun Heo:
 "A lone commit fixing CPU offline handling for per-cpu wq workers so
  that they don't bother isolated CPUs"

* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs

Pull cgroup updates from Tejun Heo:
 "Nothing too interesting. This adds cpu controller selftests and there
  are a couple code cleanup patches"

* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: remove the superfluous judgment
  cgroup: Make cgroup_debug static
  kseltest/cgroup: Make test_stress.sh work if run interactively
  kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
  cgroup: Add config file to cgroup selftest suite
  cgroup: Add test_cpucg_max_nested() testcase
  cgroup: Add test_cpucg_max() testcase
  cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
  cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
  cgroup: Add test_cpucg_weight_underprovisioned() testcase
  cgroup: Add test_cpucg_weight_overprovisioned() testcase
  cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
  cgroup: Add new test_cpu.c test suite in cgroup selftests

Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several fixes, cleanups, and enhancements to tests and framework:

   - introduce _NULL and _NOT_NULL macros to pointer error checks

   - rework kunit_resource allocation policy to fix memory leaks when
     caller doesn't specify free() function to be used when allocating
     memory using kunit_add_resource() and kunit_alloc_resource() funcs.

   - add ability to specify suite-level init and exit functions"

* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
  kunit: tool: Use qemu-system-i386 for i386 runs
  kunit: fix executor OOM error handling logic on non-UML
  kunit: tool: update riscv QEMU config with new serial dependency
  kcsan: test: use new suite_{init,exit} support
  kunit: tool: Add list of all valid test configs on UML
  kunit: take `kunit_assert` as `const`
  kunit: tool: misc cleanups
  kunit: tool: minor cosmetic cleanups in kunit_parser.py
  kunit: tool: make parser stop overwriting status of suites w/ no_tests
  kunit: tool: remove dead parse_crash_in_log() logic
  kunit: tool: print clearer error message when there's no TAP output
  kunit: tool: stop using a shell to run kernel under QEMU
  kunit: tool: update test counts summary line format
  kunit: bail out of test filtering logic quicker if OOM
  lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
  kunit: Rework kunit_resource allocation policy
  kunit: fix debugfs code to use enum kunit_status, not bool
  kfence: test: use new suite_{init/exit} support, add .kunitconfig
  kunit: add ability to specify suite-level init and exit functions
  kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
  ...

Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Several fixes, cleanups, and enhancements to tests:

   - add mips support for kprobe args string and syntax tests

   - updates to resctrl test to use kselftest framework

   - fixes, cleanups, and enhancements to tests"

* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftests/ir : Improve readability of modprobe error message
  selftests/resctrl: Fix null pointer dereference on open failed
  selftests/resctrl: Add missing SPDX license to Makefile
  selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
  selftests/resctrl: Make resctrl_tests run using kselftest framework
  selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
  selftests/resctrl: Change the default limited time to 120 seconds
  selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
  selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
  selftests/resctrl: Extend CPU vendor detection
  selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
  selftests/x86/amx: Use provided __cpuid_count() macro
  selftests/vm/pkeys: Use provided __cpuid_count() macro
  selftests: Provide local define of __cpuid_count()
  selftests/damon: add damon to selftests root Makefile
  selftests/binderfs: Improve message to provide more info
  selftests: mqueue: drop duplicate min definition
  selftests/ftrace: add mips support for kprobe args syntax tests
  selftests/ftrace: add mips support for kprobe args string tests

Pull documentation updates from Jonathan Corbet:
 "It was a moderately busy cycle for documentation; highlights include:

   - After a long period of inactivity, the Japanese translations are
     seeing some much-needed maintenance and updating.

   - Reworked IOMMU documentation

   - Some new documentation for static-analysis tools

   - A new overall structure for the memory-management documentation.
     This is an LSFMM outcome that, it is hoped, will help encourage
     developers to fill in the many gaps. Optimism is eternal...but
     hopefully it will work.

   - More Chinese translations.

  Plus the usual typo fixes, updates, etc"

* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
  docs: pdfdocs: Add space for chapter counts >= 100 in TOC
  docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
  input: Docs: correct ntrig.rst typo
  input: Docs: correct atarikbd.rst typos
  MAINTAINERS: Become the docs/zh_CN maintainer
  docs/zh_CN: fix devicetree usage-model translation
  mm,doc: Add new documentation structure
  Documentation: drop more IDE boot options and ide-cd.rst
  Documentation/process: use scripts/get_maintainer.pl on patches
  MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
  docs/trans/ja_JP/howto: Don't mention specific kernel versions
  docs/ja_JP/SubmittingPatches: Request summaries for commit references
  docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
  docs/ja_JP/SubmittingPatches: Randy has moved
  docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
  docs/ja_JP/SubmittingPatches: Update GregKH links
  Documentation/sysctl: document max_rcu_stall_to_panic
  Documentation: add missing angle bracket in cgroup-v2 doc
  Documentation: dev-tools: use literal block instead of code-block
  docs/zh_CN: add vm numa translation
  ...

Pull printk updates from Petr Mladek:

 - Offload writing printk() messages on consoles to per-console
   kthreads.

   It prevents soft-lockups when an extensive amount of messages is
   printed. It was observed, for example, during boot of large systems
   with a lot of peripherals like disks or network interfaces.

   It prevents live-lockups that were observed, for example, when
   messages about allocation failures were reported and a CPU handled
   consoles instead of reclaiming the memory. It was hard to solve even
   with rate limiting because it would need to take into account the
   amount of messages and the speed of all consoles.

   It is a must to have for real time. Otherwise, any printk() might
   break latency guarantees.

   The per-console kthreads allow to handle each console on its own
   speed. Slow consoles do not longer slow down faster ones. And
   printk() does not longer unpredictably slows down various code paths.

   There are situations when the kthreads are either not available or
   not reliable, for example, early boot, suspend, or panic. In these
   situations, printk() uses the legacy mode and tries to handle
   consoles immediately.

 - Add documentation for the printk index.

* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk, tracing: fix console tracepoint
  printk: remove @console_locked
  printk: extend console_lock for per-console locking
  printk: add kthread console printers
  printk: add functions to prefer direct printing
  printk: add pr_flush()
  printk: move buffer definitions into console_emit_next_record() caller
  printk: refactor and rework printing logic
  printk: add con_printk() macro for console details
  printk: call boot_delay_msec() in printk_delay()
  printk: get caller_id/timestamp after migration disable
  printk: wake waiters for safe and NMI contexts
  printk: wake up all waiters
  printk: add missing memory barrier to wake_up_klogd()
  printk: cpu sync always disable interrupts
  printk: rename cpulock functions
  printk/index: Printk index feature documentation
  MAINTAINERS: Add printk indexing maintainers on mention of printk_index

Pull slab updates from Vlastimil Babka:

 - Conversion of slub_debug stack traces to stackdepot, allowing more
   useful debugfs-based inspection for e.g. memory leak debugging.
   Allocation and free debugfs info now includes full traces and is
   sorted by the unique trace frequency.

   The stackdepot conversion was already attempted last year but
   reverted by ae14c63a. The memory overhead (while not actually
   enabled on boot) has been meanwhile solved by making the large
   stackdepot allocation dynamic. The xfstest issues haven't been
   reproduced on current kernel locally nor in -next, so the slab cache
   layout changes that originally made that bug manifest were probably
   not the root cause.

 - Refactoring of dma-kmalloc caches creation.

 - Trivial cleanups such as removal of unused parameters, fixes and
   clarifications of comments.

 - Hyeonggon Yoo joins as a reviewer.

* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  MAINTAINERS: add myself as reviewer for slab
  mm/slub: remove unused kmem_cache_order_objects max
  mm: slab: fix comment for __assume_kmalloc_alignment
  mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
  mm/slub: remove unneeded return value of slab_pad_check
  mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
  mm/slub: remove meaningless node check in ___slab_alloc()
  mm/slub: remove duplicate flag in allocate_slab()
  mm/slub: remove unused parameter in setup_object*()
  mm/slab.c: fix comments
  slab, documentation: add description of debugfs files for SLUB caches
  mm/slub: sort debugfs output by frequency of stack traces
  mm/slub: distinguish and print stack traces in debugfs files
  mm/slub: use stackdepot to save stack trace in objects
  mm/slub: move struct track init out of set_track()
  lib/stackdepot: allow requesting early initialization dynamically
  mm/slub, kunit: Make slub_kunit unaffected by user specified flags
  mm/slab: remove some unused functions

Commit c724c866 ("linux/types.h: remove unnecessary __bitwise__")
was right that there are no users of __bitwise__ in the kernel, but it
turns out there are user space users of it that do expect it.

It is, after all, in the uapi directory, so user space usage is to be
expected.

Instead of reverting the commit completely, let's just clarify the
situation so that it doesn't happen again, and have some in-code
explanations for why that "__bitwise__" still exists.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/all/b5c0a68d-8387-4909-beea-f70ab9e6e3d5@kernel.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit b2a90f4f ("media: lirc: remove unused lirc features") removed
feature flags which were never implemented, but they are still used by
the lirc daemon went built from source.

Reinstate these symbols in order not to break the lirc build.

Fixes: b2a90f4f ("media: lirc: remove unused lirc features")
Link: https://lore.kernel.org/all/a0470450-ecfd-2918-e04a-7b57c1fd7694@kernel.org/Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull page cache updates from Matthew Wilcox:

 - Appoint myself page cache maintainer

 - Fix how scsicam uses the page cache

 - Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS

 - Remove the AOP flags entirely

 - Remove pagecache_write_begin() and pagecache_write_end()

 - Documentation updates

 - Convert several address_space operations to use folios:
     - is_dirty_writeback
     - readpage becomes read_folio
     - releasepage becomes release_folio
     - freepage becomes free_folio

 - Change filler_t to require a struct file pointer be the first
   argument like ->read_folio

* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
  nilfs2: Fix some kernel-doc comments
  Appoint myself page cache maintainer
  fs: Remove aops->freepage
  secretmem: Convert to free_folio
  nfs: Convert to free_folio
  orangefs: Convert to free_folio
  fs: Add free_folio address space operation
  fs: Convert drop_buffers() to use a folio
  fs: Change try_to_free_buffers() to take a folio
  jbd2: Convert release_buffer_page() to use a folio
  jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
  reiserfs: Convert release_buffer_page() to use a folio
  fs: Remove last vestiges of releasepage
  ubifs: Convert to release_folio
  reiserfs: Convert to release_folio
  orangefs: Convert to release_folio
  ocfs2: Convert to release_folio
  nilfs2: Remove comment about releasepage
  nfs: Convert to release_folio
  jfs: Convert to release_folio
  ...

Pull iomap updates from Darrick Wong:
 "There's a couple of corrections sent in by Andreas for some accounting
  errors.

  The biggest change this time around is that writeback errors longer
  clear pageuptodate nor does XFS invalidate the page cache anymore.
  This brings XFS (and gfs2/zonefs) behavior in line with every other
  Linux filesystem driver, and fixes some UAF bugs that only cropped up
  after willy turned on multipage folios for XFS in 5.18-rc1.

  Regrettably, it took all the way to the end of the 5.18 cycle to find
  the source of these bugs and reach a consensus that XFS' writeback
  failure behavior from 20 years ago is no longer necessary.

  Summary:

   - Fix a couple of accounting errors in the buffered io code.

   - Discontinue the practice of marking folios !uptodate and
     invalidating them when writeback fails.

     This fixes some UAF bugs when multipage folios are enabled, and
     brings the behavior of XFS/gfs/zonefs into alignment with the
     behavior of all the other Linux filesystems"

* tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: don't invalidate folios after writeback errors
  iomap: iomap_write_end cleanup
  iomap: iomap_write_failed fix

Pull dlm updates from David Teigland:
 "This includes several large patches to improve endian handling and
  remove sparse warnings. The code previously used in/out, in-place
  endianness conversion functions.

  Other code cleanup includes the list iterator changes.

  Finally, a long standing bug was found and fixed, caused by missed
  decrement on an lock struct ref count"

* tag 'dlm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (28 commits)
  dlm: use kref_put_lock in __put_lkb
  dlm: use kref_put_lock in put_rsb
  dlm: remove unnecessary error assign
  dlm: fix missing lkb refcount handling
  fs: dlm: cast resource pointer to uintptr_t
  dlm: replace usage of found with dedicated list iterator variable
  dlm: remove usage of list iterator for list_add() after the loop body
  dlm: fix pending remove if msg allocation fails
  dlm: fix wake_up() calls for pending remove
  dlm: check required context while close
  dlm: cleanup lock handling in dlm_master_lookup
  dlm: remove found label in dlm_master_lookup
  dlm: remove __user conversion warnings
  dlm: move conversion to compile time
  dlm: use __le types for dlm messages
  dlm: use __le types for rcom messages
  dlm: use __le types for dlm header
  dlm: use __le types for options header
  dlm: add __CHECKER__ for false positives
  dlm: move global to static inits
  ...

Pull ext4 updates from Ted Ts'o:
 "Various bug fixes and cleanups for ext4.

  In particular, move the crypto related fucntions from fs/ext4/super.c
  into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
  and error injection tools"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: only allow test_dummy_encryption when supported
  ext4: fix bug_on in __es_tree_search
  ext4: avoid cycles in directory h-tree
  ext4: verify dir block before splitting it
  ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
  ext4: fix bug_on in ext4_writepages
  ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
  ext4: cleanup function defs from ext4.h into crypto.c
  ext4: move ext4 crypto code to its own file crypto.c
  ext4: fix memory leak in parse_apply_sb_mount_options()
  ext4: reject the 'commit' option on ext2 filesystems
  ext4: remove duplicated #include of dax.h in inode.c
  ext4: fix race condition between ext4_write and ext4_convert_inline_data
  ext4: convert symlink external data block mapping to bdev
  ext4: add nowait mode for ext4_getblk()
  ext4: fix journal_ioprio mount option handling
  ext4: mark group as trimmed only if it was fully scanned
  ext4: fix use-after-free in ext4_rename_dir_prepare
  ext4: add unmount filesystem message
  ext4: remove unnecessary conditionals
  ...

Merge tag 'drm-intel-next-fixes-2022-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v5.19 merge window:
- Build, sparse, UB, and CFI fixes
- Variable scope fix
- Audio pipe logging fix
- ICL+ DSI NULL dereference fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sfozuj44.fsf@intel.com

Pull gfs2 updates from Andreas Gruenbacher:

 - Clean up the allocation of glocks that have an address space attached

 - Quota locking fix and quota iomap conversion

 - Fix the FITRIM error reporting

 - Some list iterator cleanups

* tag 'gfs2-v5.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Convert function bh_get to use iomap
  gfs2: use i_lock spin_lock for inode qadata
  gfs2: Return more useful errors from gfs2_rgrp_send_discards()
  gfs2: Use container_of() for gfs2_glock(aspace)
  gfs2: Explain some direct I/O oddities
  gfs2: replace 'found' with dedicated list iterator variable

Pull btrfs updates from David Sterba:
 "Features:

   - subpage:
      - support for PAGE_SIZE > 4K (previously only 64K)
      - make it work with raid56

   - repair super block num_devices automatically if it does not match
     the number of device items

   - defrag can convert inline extents to regular extents, up to now
     inline files were skipped but the setting of mount option
     max_inline could affect the decision logic

   - zoned:
      - minimal accepted zone size is explicitly set to 4MiB
      - make zone reclaim less aggressive and don't reclaim if there are
        enough free zones
      - add per-profile sysfs tunable of the reclaim threshold

   - allow automatic block group reclaim for non-zoned filesystems, with
     sysfs tunables

   - tree-checker: new check, compare extent buffer owner against owner
     rootid

  Performance:

   - avoid blocking on space reservation when doing nowait direct io
     writes (+7% throughput for reads and writes)

   - NOCOW write throughput improvement due to refined locking (+3%)

   - send: reduce pressure to page cache by dropping extent pages right
     after they're processed

  Core:

   - convert all radix trees to xarray

   - add iterators for b-tree node items

   - support printk message index

   - user bulk page allocation for extent buffers

   - switch to bio_alloc API, use on-stack bios where convenient, other
     bio cleanups

   - use rw lock for block groups to favor concurrent reads

   - simplify workques, don't allocate high priority threads for all
     normal queues as we need only one

   - refactor scrub, process chunks based on their constraints and
     similarity

   - allocate direct io structures on stack and pass around only
     pointers, avoids allocation and reduces potential error handling

  Fixes:

   - fix count of reserved transaction items for various inode
     operations

   - fix deadlock between concurrent dio writes when low on free data
     space

   - fix a few cases when zones need to be finished

  VFS, iomap:

   - add helper to check if sb write has started (usable for assertions)

   - new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"

* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
  btrfs: zoned: introduce a minimal zone size 4M and reject mount
  btrfs: allow defrag to convert inline extents to regular extents
  btrfs: add "0x" prefix for unsupported optional features
  btrfs: do not account twice for inode ref when reserving metadata units
  btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
  btrfs: send: avoid trashing the page cache
  btrfs: send: keep the current inode open while processing it
  btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
  btrfs: move struct btrfs_dio_private to inode.c
  btrfs: remove the disk_bytenr in struct btrfs_dio_private
  btrfs: allocate dio_data on stack
  iomap: add per-iomap_iter private data
  iomap: allow the file system to provide a bio_set for direct I/O
  btrfs: add a btrfs_dio_rw wrapper
  btrfs: zoned: zone finish unused block group
  btrfs: zoned: properly finish block group on metadata write
  btrfs: zoned: finish block group when there are no more allocatable bytes left
  btrfs: zoned: consolidate zone finish functions
  btrfs: zoned: introduce btrfs_zoned_bg_is_full
  btrfs: improve error reporting in lookup_inline_extent_backref
  ...

Pull zonefs fix from Damien Le Moal:
 "A single patch to fix zonefs_init_file_inode() return value"

* tag 'zonefs-5.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix zonefs_init_file_inode() return value

Pull erofs (and fscache) updates from Gao Xiang:
 "After working on it on the mailing list for more than half a year, we
  finally form 'erofs over fscache' feature into shape. Hopefully it
  could bring more possibility to the communities.

  The story mainly started from a new project what we called "RAFS v6" [1]
  for Nydus image service almost a year ago, which enhances EROFS to be
  a new form of one bootstrap (which includes metadata representing the
  whole fs tree) + several data-deduplicated content addressable blobs
  (actually treated as multiple devices). Each blob can represent one
  container image layer but not quite exactly since all new data can be
  fully existed in the previous blobs so no need to introduce another
  new blob.

  It is actually not a new idea (at least on my side it's much like a
  simpilied casync [2] for now) and has many benefits over per-file
  blobs or some other exist ways since typically each RAFS v6 image only
  has dozens of device blobs instead of thousands of per-file blobs.
  It's easy to be signed with user keys as a golden image, transfered
  untouchedly with minimal overhead over the network, kept in some type
  of storage conveniently, and run with (optional) runtime verification
  but without involving too many irrelevant features crossing the system
  beyond EROFS itself. At least it's our final goal and we're keeping
  working on it. There was also a good summary of this approach from the
  casync author [3].

  Regardless further optimizations, this work is almost done in the
  previous Linux release cycles. In this round, we'd like to introduce
  on-demand load for EROFS with the fscache/cachefiles infrastructure,
  considering the following advantages:

   - Introduce new file-based backend to EROFS. Although each image only
     contains dozens of blobs but in densely-deployed runC host for
     example, there could still be massive blobs on a machine, which is
     messy if each blob is treated as a device. In contrast, fscache and
     cachefiles are really great interfaces for us to make them work.

   - Introduce on-demand load to fscache and EROFS. Previously, fscache
     is mainly used to caching network-likewise filesystems, now it can
     support on-demand downloading for local fses too with the exact
     localfs on-disk format. It has many advantages which we're been
     described in the latest patchset cover letter [4]. In addition to
     that, most importantly, the cached data is still stored in the
     original local fs on-disk format so that it's still the one signed
     with private keys but only could be partially available. Users can
     fully trust it during running. Later, users can also back up
     cachefiles easily to another machine.

   - More reliable on-demand approach in principle. After data is all
     available locally, user daemon can be no longer online in some use
     cases, which helps daemon crash recovery (filesystems can still in
     service) and hot-upgrade (user daemon can be upgraded more
     frequently due to new features or protocols introduced.)

   - Other format can also be converted to EROFS filesystem format over
     the internet on the fly with the new on-demand load feature and
     mounted. That is entirely possible with on-demand load feature as
     long as such archive format metadata can be fetched in advance like
     stargz.

  In addition, although currently our target user is Nydus image service [5],
  but laterly, it can be used for other use cases like on-demand system
  booting, etc. As for the fscache on-demand load feature itself,
  strictly it can be used for other local fses too. Laterly we could
  promote most code to the iomap infrastructure and also enhance it in
  the read-write way if other local fses are interested.

  Thanks David Howells for taking so much time and patience on this
  these months, many thanks with great respect here again! Thanks Jeffle
  for working on this feature and Xin Yin from Bytedance for
  asynchronous I/O implementation as well as Zichen Tian, Jia Zhu, and
  Yan Song for testing, much appeciated. We're also exploring more
  possibly over fscache cache management over FSDAX for secure
  containers and working on more improvements and useful features for
  fscache, cachefiles, and on-demand load.

  In addition to "erofs over fscache", NFS export and idmapped mount are
  also completed in this cycle for container use cases as well.

  Summary:

   - Add erofs on-demand load support over fscache

   - Support NFS export for erofs

   - Support idmapped mounts for erofs

   - Don't prompt for risk any more when using big pcluster

   - Fix buffer copy overflow of ztailpacking feature

   - Several minor cleanups"

[1] https://lore.kernel.org/r/20210730194625.93856-1-hsiangkao@linux.alibaba.com
[2] https://github.com/systemd/casync
[3] http://0pointer.net/blog/casync-a-tool-for-distributing-file-system-images.html
[4] https://lore.kernel.org/r/20220509074028.74954-1-jefflexu@linux.alibaba.com
[5] https://github.com/dragonflyoss/image-service

* tag 'erofs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (29 commits)
  erofs: scan devices from device table
  erofs: change to use asynchronous io for fscache readpage/readahead
  erofs: add 'fsid' mount option
  erofs: implement fscache-based data readahead
  erofs: implement fscache-based data read for inline layout
  erofs: implement fscache-based data read for non-inline layout
  erofs: implement fscache-based metadata read
  erofs: register fscache context for extra data blobs
  erofs: register fscache context for primary data blob
  erofs: add erofs_fscache_read_folios() helper
  erofs: add anonymous inode caching metadata for data blobs
  erofs: add fscache context helper functions
  erofs: register fscache volume
  erofs: add fscache mode check helper
  erofs: make erofs_map_blocks() generally available
  cachefiles: document on-demand read mode
  cachefiles: add tracepoints for on-demand read mode
  cachefiles: enable on-demand read mode
  cachefiles: implement on-demand read
  cachefiles: notify the user daemon when withdrawing cookie
  ...

Pull exfat updates from Namjae Jeon:

 - fix referencing wrong parent directory information during rename

 - introduce a sys_tz mount option to use system timezone

 - improve performance while zeroing a cluster with dirsync mount option

 - fix slab-out-bounds in exat_clear_bitmap() reported from syzbot

* tag 'exfat-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: check if cluster num is valid
  exfat: reduce block requests when zeroing a cluster
  block: add sync_blockdev_range()
  exfat: introduce mount option 'sys_tz'
  exfat: fix referencing wrong parent directory information after renaming

Pull fs idmapping updates from Christian Brauner:
 "This contains two minor updates:

   - An update to the idmapping documentation by Rodrigo making it
     easier to understand that we first introduce several use-cases that
     fail without idmapped mounts simply to explain how they can be
     handled with idmapped mounts.

   - When changing a mount's idmapping we now hold writers to make it
     more robust.

     This is similar to turning a mount ro with the difference that in
     contrast to turning a mount ro changing the idmapping can only ever
     be done once while a mount can transition between ro and rw as much
     as it wants.

     The vfs layer itself takes care to retrieve the idmapping of a
     mount once ensuring that the idmapping used for vfs permission
     checking is identical to the idmapping passed down to the
     filesystem. All filesystems with FS_ALLOW_IDMAP raised take the
     same precautions as the vfs in code-paths that are outside of
     direct control of the vfs such as ioctl()s.

     However, holding writers makes this more robust and predictable for
     both the kernel and userspace.

     This is a minor user-visible change. But it is extremely unlikely
     to matter. The caller must've created a detached mount via
     OPEN_TREE_CLONE and then handed that O_PATH fd to another process
     or thread which then must've gotten a writable fd for that mount
     and started creating files in there while the caller is still
     changing mount properties. While not impossible it will be an
     extremely rare corner-case and should in general be considered a
     bug in the application. Consider making a mount MOUNT_ATTR_NOEXEC
     or MOUNT_ATTR_NODEV while allowing someone else to perform lookups
     or exec'ing in parallel by handing them a copy of the
     OPEN_TREE_CLONE fd or another fd beneath that mount.

     I've pinged all major users of idmapped mounts pointing out this
     change and none of them have active writers on a mount while still
     changing mount properties. It would've been strange if they did.

  The rest and majority of the work will be coming through the overlayfs
  tree this cycle. In addition to overlayfs this cycle should also see
  support for idmapped mounts on erofs as I've acked a patch to this
  effect a little while ago"

* tag 'fs.idmapped.v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: hold writers when changing mount's idmapping
  docs: Add small intro to idmap examples

Pull media updates from Mauro Carvalho Chehab:

 - dvb-usb drivers entries got reworked to avoid usage of magic numbers
   to refer to data position inside tables

 - vcodec driver has gained support for MT8186 and for vp8 and vp9
   stateless codecs

 - hantro has gained support for Hantro G1 on RK366x

 - Added more h264 levels on coda960

 - ccs gained support for MIPI CSI-2 28 bits per pixel raw data type

 - venus driver gained support for Qualcomm custom compressed pixel
   formats

 - lots of driver fixes and updates

* tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: hantro: Enable HOLD_CAPTURE_BUF for H.264
  media: hantro: Add H.264 field decoding support
  media: hantro: h264: Make dpb entry management more robust
  media: hantro: Stop using H.264 parameter pic_num
  media: rkvdec: Enable capture buffer holding for H264
  media: rkvdec-h264: Add field decoding support
  media: rkvdec: Ensure decoded resolution fit coded resolution
  media: rkvdec: h264: Fix reference frame_num wrap for second field
  media: rkvdec: h264: Validate and use pic width and height in mbs
  media: rkvdec: Move H264 SPS validation in rkvdec-h264
  media: rkvdec: h264: Fix bit depth wrap in pps packet
  media: rkvdec: h264: Fix dpb_valid implementation
  media: rkvdec: Stop overclocking the decoder
  media: v4l2: Reorder field reflist
  media: h264: Sort p/b reflist using frame_num
  media: v4l2: Trace calculated p/b0/b1 initial reflist
  media: h264: Store all fields into the unordered list
  media: h264: Store current picture fields
  media: h264: Increase reference lists size to 32
  media: h264: Use v4l2_h264_reference for reflist
  ...

Pull device properties framework updates from Rafael Wysocki:
 "These mostly extend the device property API and make it easier to use
  in some cases.

  Specifics:

   - Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).

   - Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
     Anderson).

   - Advertise fwnode and device property count API calls (Andy
     Shevchenko).

   - Clean up fwnode_is_ancestor_of() (Andy Shevchenko).

   - Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
     Ailus).

   - Release subnode properties with data nodes (Sakari Ailus).

   - Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"

* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Advertise fwnode and device property count API calls
  device property: Fix recent breakage of fwnode_get_next_parent_dev()
  device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
  device property: Introduce fwnode_for_each_parent_node()
  device property: Allow error pointer to be passed to fwnode APIs
  ACPI: property: Release subnode properties with data nodes
  device property: Add irq_get to fwnode operation
  device property: Add iomap to fwnode operations
  ACPI: property: Move acpi_fwnode_device_get_match_data() up
  device property: Convert device_{dma_supported,get_dma_attr} to fwnode

Pull thermal control updates from Rafael Wysocki:
 "These add a thermal library and thermal tools to wrap the netlink
  interface into event-based callbacks, improve overheat condition
  handling during suspend-to-idle on Intel SoCs, add some new hardware
  support, fix bugs and clean up code.

  Specifics:

   - Add thermal library and thermal tools to encapsulate the netlink
     into event based callbacks (Daniel Lezcano, Jiapeng Chong).

   - Improve overheat condition handling during suspend-to-idle in the
     Intel PCH thermal driver (Zhang Rui).

   - Use local ops instead of global ops in devfreq_cooling (Kant Fan).

   - Clean up _OSC handling in int340x (Davidlohr Bueso).

   - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
     (Hesham Almatary).

   - Add new k3 j72xx bangdap driver and the corresponding bindings
     (Keerthy).

   - Fix missing of_node_put() in the SC iMX driver at probe time
     (Miaoqian Lin).

   - Fix memory leak in __thermal_cooling_device_register()
     when device_register() fails by calling
     thermal_cooling_device_destroy_sysfs() (Yang Yingliang).

   - Add sc8180x and sc8280xp compatible string in the DT bindings and
     lMH support for QCom tsens driver (Bjorn Andersson).

   - Fix OTP Calibration Register values conforming to the documentation
     on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).

   - Fix type in kerneldoc description for __thermal_bind_params
     (Corentin Labbe).

   - Fix potential NULL dereference in sr_thermal_probe() on Broadcom
     platform (Zheng Yongjun).

   - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
     Pallikunhi).

   - Fix non-negative value support by preventing the value to be clamp
     to zero (Stefan Wahren).

   - Add compatible string and DT bindings for MSM8960 tsens driver
     (Dmitry Baryshkov).

   - Add hwmon support for K3 driver (Massimiliano Minella).

   - Refactor and add multiple generations support for QCom ADC driver
     (Jishnu Prakash).

   - Use platform_get_irq_optional() to get the interrupt on RCar driver
     and document Document RZ/V2L bindings (Lad Prabhakar).

   - Remove NULL check after container_of() call from the Intel HFI
     thermal driver (Haowen Bai)"

* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
  thermal: intel: pch: improve the cooling delay log
  thermal: intel: pch: enhance overheat handling
  thermal: intel: pch: move cooling delay to suspend_noirq phase
  PM: wakeup: expose pm_wakeup_pending to modules
  thermal: k3_j72xx_bandgap: Add the bandgap driver support
  dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
  thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
  thermal/core: Fix memory leak in __thermal_cooling_device_register()
  dt-bindings: thermal: tsens: Add sc8280xp compatible
  dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
  thermal/drivers/qcom/lmh: Add sc8180x compatible
  thermal/drivers/rz2gl: Fix OTP Calibration Register values
  dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
  thermal: thermal_of: fix typo on __thermal_bind_params
  tools/thermal: remove unneeded semicolon
  tools/lib/thermal: remove unneeded semicolon
  thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
  tools/thermal: Add thermal daemon skeleton
  tools/thermal: Add a temperature capture tool
  tools/thermal: Add util library
  ...