- 09 Sep, 2017 21 commits
-
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
Michal Simek authored
Showing message that driver is loaded is common across drivers. This change also fixes checkpatch (--strict) warning "Alignment should match open parenthesis". Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
-
Michal Simek authored
Give read access to module parameters to all and write access to root. This change also improves driver error path testing. Signed-off-by:
-
Julia Lawall authored
These watchdog_ops and watchdog_info structures are only stored in the ops and info fields of a watchdog_device structure, respectively, which are const. Thus make the watchdog_ops and watchdog_info structures const as well. Done with the help of Coccinelle. The rules for the watchdog_ops case are as follows: // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Wolfram Sang authored
We should never return more time left than there actually is. So, switch to a plain divider instead of DIV_ROUND_CLOSEST. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Wolfram Sang authored
If we set RWTCSRB to 0, we can gain 4096 as another divider value. This is supported by all R-Car Gen2 and Gen3 devices which we aim to support. Signed-off-by:
-
Wolfram Sang authored
The error margin of the clks_per_second variable was too large and caused offsets when used with clock frequencies which left a remainder after applying the dividers. Now we always calculate directly using the clock rate and the divider using some helper macros. That also means that DIV_ROUND_UP moves from probe to the multiplication macro. In probe, we don't need to ensure anymore that 'clks_per_sec' would go too fast but rather ensure that the lower limit is really at least 1 to certainly get a full cycle. Signed-off-by:
-
Wolfram Sang authored
We should never return more time left than there actually is. So, switch to a plain divider instead of DIV_ROUND_CLOSEST. Signed-off-by:
-
Wolfram Sang authored
When checking the clock rate, ensure also that counting all 16 bits takes at least one second to match the granularity of the framework. Signed-off-by:
-
Wolfram Sang authored
Because the smallest clock divider we can select is 1, 'clks_per_sec' must be the same type as 'rate'. Signed-off-by:
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: linux-watchdog@vger.kernel.org Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: linux-watchdog@vger.kernel.org Signed-off-by:
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: linux-watchdog@vger.kernel.org Signed-off-by:
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: linux-watchdog@vger.kernel.org Signed-off-by:
-
Martin Blumenstingl authored
The watchdog IP block on Meson8 and Meson8m2 is already supported by the existing meson-wdt driver. Meson8 uses the same register bits as Meson6, while the newer Meson8m2 SoC uses the same register bits as Meson8b. Currently watchdog support on Meson8 SoC already works because meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a separate compatible for Meson8 makes this more explicit though. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Colin Ian King authored
Don't populate array chip_name on the stack but instead make it static. Makes the object code smaller by 40 bytes: Before: text data bss dec hex filename 5641 2840 384 8865 22a1 drivers/watchdog/w83627hf_wdt.o After: text data bss dec hex filename 5545 2896 384 8825 2279 drivers/watchdog/w83627hf_wdt.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Gustavo A. R. Silva authored
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; Signed-off-by:Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
-
Gustavo A. R. Silva authored
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; Signed-off-by: -
Gustavo A. R. Silva authored
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; Signed-off-by: -
Gustavo A. R. Silva authored
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; Signed-off-by: -
Wim Van Sebroeck authored
This reverts commit 1fccb730. Reported as Bug 196509 - iTCO_wdt regression reboot before timeout expire Signed-off-by:
-
- 08 Sep, 2017 17 commits
-
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Several fixes from static analysis and message noise reduction. Correct WMI core and related drivers to evaluate instance number 0x0 in accordance with the documentation. Add intel-telemetry support for Gemini Lake. Various individual driver fixes noted below. dell-wmi: - Update dell_wmi_check_descriptor_buffer() to new model intel-vbtn: - reduce unnecessary messages for normal users - match power button on press rather than release intel-hid: - reduce unnecessary messages for normal users thinkpad_acpi: - Fix warning about deprecated hwmon_device_register wmi: - Fix check for method instance number ideapad-laptop: - Expose conservation mode switch intel_pmc_core: - Make the driver PCH family agnostic peaq-wmi: - Evaluate wmi method with instance number 0x0 - silence a static checker warning mxm-wmi: - Evaluate wmi method with instance number 0x0 asus-wmi: - Evaluate wmi method with instance number 0x0 intel_scu_ipc: - make intel_scu_ipc_pdata_t const intel_mid_powerbtn: - make mid_pb_ddata const - fix error return code in mid_pb_probe() hp-wmi: - Remove unused macro helper - Correctly determine method id in WMI calls dell-wmi: - Fix driver interface version query intel_telemetry: - remove redundant macro definition - Add GLK PSS Event Table alienware-wmi: - fix format string overflow warning ibm_rtl: - remove unnecessary static in ibm_rtl_write() msi-wmi: - remove unnecessary static in msi_wmi_notify()" * tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits) platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model platform/x86: intel-vbtn: reduce unnecessary messages for normal users platform/x86: intel-hid: reduce unnecessary messages for normal users platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register platform/x86: wmi: Fix check for method instance number platform/x86: ideapad-laptop: Expose conservation mode switch platform/x86: intel_pmc_core: Make the driver PCH family agnostic platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0 platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0 platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0 platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const platform/x86: intel_mid_powerbtn: make mid_pb_ddata const platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe() platform/x86: hp-wmi: Remove unused macro helper platform/x86: hp-wmi: Correctly determine method id in WMI calls platform/x86: intel-vbtn: match power button on press rather than release platform/x86: dell-wmi: Fix driver interface version query platform/x86: intel_telemetry: remove redundant macro definition platform/x86: intel_telemetry: Add GLK PSS Event Table platform/x86: alienware-wmi: fix format string overflow warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - Support for HSDK board hosting a Quad core HS38x4 based SoC running @1GHz (and some prerrquisite changes such as ability to scoot the kernel code/data from start of memory map etc) - Quite a few updates for EZChip (Mellanox) platform - Fixes to fault/exception printing * tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits) ARC: Re-enable MMU upon Machine Check exception ARC: Show fault information passed to show_kernel_fault_diag() ARC: [plat-hsdk] initial port for HSDK board ARC: mm: Decouple RAM base address from kernel link address ARCv2: IOC: Tighten up the contraints (specifically base / size alignment) ARC: [plat-axs103] refactor the DT fudging code ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting ARCv2: SLC: provide a line based flush routine for debugging ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch ARC: [plat-eznps] avoid toggling of DPC register ARC: [plat-eznps] Update the init sequence of aux regs per cpu. ARC: [plat-eznps] new command line argument for HW scheduler at MTM ARC: set boot print log level to PR_INFO ARC: [plat-eznps] Handle user memory error same in simulation and silicon ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task ARC: create cpu specific version of arch_cpu_idle() ARC: [plat-eznps] spinlock aware for MTM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.14 Common: - improve heuristic for boosting preempted spinlocks by ignoring VCPUs in user mode ARM: - fix for decoding external abort types from guests - added support for migrating the active priority of interrupts when running a GICv2 guest on a GICv3 host - minor cleanup PPC: - expose storage keys to userspace - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations - fixes s390: - merge of kvm/master to avoid conflicts with additional sthyi fixes - wire up the no-dat enhancements in KVM - multiple epoch facility (z14 feature) - Configuration z/Architecture Mode - more sthyi fixes - gdb server range checking fix - small code cleanups x86: - emulate Hyper-V TSC frequency MSRs - add nested INVPCID - emulate EPTP switching VMFUNC - support Virtual GIF - support 5 level page tables - speedup nested VM exits by packing byte operations - speedup MMIO by using hardware provided physical address - a lot of fixes and cleanups, especially nested" * tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) KVM: arm/arm64: Support uaccess of GICC_APRn KVM: arm/arm64: Extract GICv3 max APRn index calculation KVM: arm/arm64: vITS: Drop its_ite->lpi field KVM: arm/arm64: vgic: constify seq_operations and file_operations KVM: arm/arm64: Fix guest external abort matching KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd KVM: s390: vsie: cleanup mcck reinjection KVM: s390: use WARN_ON_ONCE only for checking KVM: s390: guestdbg: fix range check KVM: PPC: Book3S HV: Report storage key support to userspace KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9 KVM: PPC: Book3S HV: Fix invalid use of register expression KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER KVM: PPC: e500mc: Fix a NULL dereference KVM: PPC: e500: Fix some NULL dereferences on error KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list KVM: s390: we are always in czam mode KVM: s390: expose no-DAT to guest and migration support KVM: s390: sthyi: remove invalid guest write access ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - TAP13 framework API and converting tests to TAP13 continues. A few more tests are converted and kselftest common RUN_TESTS in lib.mk is enhanced to print TAP13 to cover test shell scripts that won't be able to use kselftest API. - Several fixes to existing tests to not fail in unsupported cases. This has been an ongoing work based on the feedback from stable release kselftest users. - A new watchdog test and much needed cleanups to the existing tests from Eugeniu Rosca. - Changes to kselftest common lib.mk framework to make RUN_TESTS a function to be called from individual test make files to run stress and destructive sub-tests. * tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits) selftests: Enhance kselftest_harness.h to print which assert failed selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format selftests: change lib.mk RUN_TESTS to take test list as an argument selftests: lib.mk: suppress "cd" output from run_tests target selftests: kselftest framework: change skip exit code to 0 selftests/timers: make loop consistent with array size selftests: timers: remove rtctest_setdate from run_destructive_tests selftests: timers: Fix run_destructive_tests target to handle skipped tests kselftests: timers: leap-a-day: Change default arguments to help test runs selftests: timers: drop support for !KTEST case rtc: rtctest: Improve support detection selftests/cpu-hotplug: Skip test when there is only one online cpu selftests/cpu-hotplug: exit with failure when test occured unexpected behaviors selftests: futex: convert test to use ksft TAP13 framework selftests: capabilities: convert error output to TAP13 ksft framework selftests: memfd: Align STACK_SIZE for ARM AArch64 system selftests: warn if failure is due to lack of executable bit selftests: kselftest framework: add error counter selftests: capabilities: convert the test to use TAP13 ksft framework selftests: capabilities: fix to run Non-root +ia, sgidroot => i test ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "Nothing new in development for this release. These are mostly fixes that were found during development of changes for the next merge window and fixes that were sent to me late in the last cycle" * tag 'trace-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Apply trace_clock changes to instance max buffer tracing: Fix clear of RECORDED_TGID flag when disabling trace event tracing: Add barrier to trace_printk() buffer nesting modification ftrace: Fix memleak when unregistering dynamic ops when tracing disabled ftrace: Fix selftest goto location on error ftrace: Zero out ftrace hashes when a module is removed tracing: Only have rmmod clear buffers that its events were active in ftrace: Fix debug preempt config name in stack_tracer_{en,dis}able
-
Linus Torvalds authored
I had stupidly missed one special use of 'is_reserved_word()' when I converted the code to avoid gperf. I had changed that function to return the token ID directly rather than a pointer to the token descriptor structure, but that meant that the test for "is this a reserved word" changed from checking the return value against NULL, to checking that it wasn't negative. And while I had converted the main token parser over, I missed the special case of the typeof phrase handling. And since our dependency chain for genksyms does not include the genksyms program itself changing, my kernel rebuild didn't show the problem. Fixes: bb3290d9 ("Remove gperf usage from toolchain") Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The fix in the parent made me look at that function, and react to how illogical and illegible the array initializer was. Use named array indexes to make it clearer what is going on, and make the initializer not depend silently on the exact index numbers. [ The initializer now also shows an odd inconsistency in the naming: note the IWCM vs IWPM.. - Linus ] Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: -
Leon Romanovsky authored
The netlink message sent with type == 0, which doesn't have any client behind it, caused to the overflow in max_num_ops array. Fix it by declaring zero number of ops for the first client. Fixes: c9901724 ("RDMA/netlink: Remove netlink clients infrastructure") Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář authored
This fix was intended for 4.13, but didn't get in because both maintainers were on vacation. Paul Mackerras: "It adds mutual exclusion between list_add_rcu and list_del_rcu calls on the kvm->arch.spapr_tce_tables list. Without this, userspace could potentially trigger corruption of the list and cause a host crash or worse."
-
Linus Torvalds authored
Remove our use of 'gperf' for generating perfect hashes from some of our build tools. This removal was prompted by Masahiro Yamada sending out a patch that removes all our pre-generated files, and when I tested it, I noticed that the gperf version I have (3.1) apparently generates code that no longer works with out code-base because the function interfaces generated by gperf have changed. We really don't care that much, and the gperf people changed their interfaces in ways that makes it annoying to work with them. Tools that make it hard to use them should not be used, and the kernel is not at all interested in some autoconf mess. So remove the gperf dependency entirely. It turns out that if you ignore the pre-generated files, the use of gperf apparently saved us a whopping fifteen lines of code. It obviously wasn't worth it, considering that the pre-generated files are about 500 lines. I sent this out as a patch about three weeks ago, and got absolutely zero responses. So let's see if anybody notices now that I merge it. Because there might be serious bugs here, but it WorksForMe(tm). * gperf-removal: Remove gperf usage from toolchain
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds authored
Pull printk updates from Petr Mladek: - Do not allow use of freed init data and code even when boot consoles are forced to stay. Also check for the init memory more precisely. - Some code clean up by starting contributors. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Clean up do_syslog() error handling printk/console: Enhance the check for consoles using init memory printk/console: Always disable boot consoles that use init memory before it is freed printk: Modify operators of printed_len and text_len
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds authored
Pull audit updates from Paul Moore: "A small pull request for audit this time, only four patches and only two with any real code changes. Those two changes are the removal of a pointless SELinux AVC initialization audit event and a fix to improve the audit timestamp overhead. The other two patches are comment cleanup and administrative updates, nothing very exciting. Everything passes our tests" * tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: update the function comments selinux: remove AVC init audit log message audit: update the audit info in MAINTAINERS audit: Reduce overhead using a coarse clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull secureexec update from Kees Cook: "This series has the ultimate goal of providing a sane stack rlimit when running set*id processes. To do this, the bprm_secureexec LSM hook is collapsed into the bprm_set_creds hook so the secureexec-ness of an exec can be determined early enough to make decisions about rlimits and the resulting memory layouts. Other logic acting on the secureexec-ness of an exec is similarly consolidated. Capabilities needed some special handling, but the refactoring removed other special handling, so that was a wash" * tag 'secureexec-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Consolidate pdeath_signal clearing exec: Use sane stack rlimit under secureexec exec: Consolidate dumpability logic smack: Remove redundant pdeath_signal clearing exec: Use secureexec for clearing pdeath_signal exec: Use secureexec for setting dumpability LSM: drop bprm_secureexec hook commoncap: Move cap_elevated calculation into bprm_set_creds commoncap: Refactor to remove bprm_secureexec hook smack: Refactor to remove bprm_secureexec hook selinux: Refactor to remove bprm_secureexec hook apparmor: Refactor to remove bprm_secureexec hook binfmt: Introduce secureexec flag exec: Correct comments about "point of no return" exec: Rename bprm->cred_prepared to called_set_creds
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc plugins update from Kees Cook: "This finishes the porting work on randstruct, and introduces a new option to structleak, both noted below: - For the randstruct plugin, enable automatic randomization of structures that are entirely function pointers (along with a couple designated initializer fixes). - For the structleak plugin, provide an option to perform zeroing initialization of all otherwise uninitialized stack variables that are passed by reference (Ard Biesheuvel)" * tag 'gcc-plugins-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: structleak: add option to init all vars used as byref args randstruct: Enable function pointer struct detection drivers/net/wan/z85230.c: Use designated initializers drm/amd/powerplay: rv: Use designated initializers -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore update from Kees Cook: "Make pstore permissions more versatile by removing CAP_SYSLOG requirement and defining more restrictive root directory DAC permissions default (0750, which can be adjust after boot unlike the CAP_SYSLOG check). Suggested by Nick Kralevich" * tag 'pstore-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Revert "pstore: Honor dmesg_restrict sysctl on dmesg dumps" pstore: Make default pstorefs root dir perms 0750
-
- 07 Sep, 2017 2 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs update from Steve French: "Enable xattr support for smb3 and also a bugfix" * tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6: cifs: Check for timeout on Negotiate stage cifs: Add support for writing attributes on SMB2+ cifs: Add support for reading attributes on SMB2+
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio fix from Ben LaHaise: "Improve aio-nr counting on large SMP systems. It has been in linux-next for quite some time" * git://git.kvack.org/~bcrl/aio-next: fs: aio: fix the increment of aio-nr and counting against aio-max-nr
-
