- 03 Aug, 2018 40 commits
-
-
Martin Wilck authored
commit 9362dd11 upstream. Fixes: 72ecad22 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Wilck authored
commit b403ea24 upstream. If the last page of the bio is not "full", the length of the last vector slot needs to be corrected. This slot has the index (bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper array, which is shifted by the value of bio->bi_vcnt at function invocation, the correct index is (nr_pages - 1). v2: improved readability following suggestions from Ming Lei. v3: followed a formatting suggestion from Christoph Hellwig. Fixes: 2cefe4db ("block: add bio_iov_iter_get_pages()") Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Andy Shevchenko authored
[ Upstream commit 7056a2bc ] It seems there is a classical off-by-one typo from the beginning when commit ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") introduced a new helper. Fix a typo by introducing a macro constant. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180319141932.37290-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 5e9cfeba ] drm_atomic_helper_shutdown() needs to release the reference held by plane->fb. Since commit 49d70aea ("drm/atomic-helper: Fix leak in disable_all") we're doing that by calling drm_atomic_clean_old_fb() in drm_atomic_helper_disable_all(). This also leaves plane->fb == NULL afterwards. However, since drm_atomic_helper_disable_all() is also used by the i915 gpu reset code drm_atomic_helper_commit_duplicated_state() then has to undo the damage and put the correct plane->fb pointers back in (and also adjust the ref counts to match again as well). That approach doesn't work so well for load detection as nothing sets up the plane->old_fb pointers for us. This causes us to leak an extra reference for each plane->fb when drm_atomic_helper_commit_duplicated_state() calls drm_atomic_clean_old_fb() after load detection. To fix this let's call drm_atomic_clean_old_fb() only for drm_atomic_helper_shutdown() as that's the only time we need to actually drop the plane->fb references. In all the other cases (load detection, gpu reset) we want to leave plane->fb alone. v2: Don't inflict the clean_old_fbs bool to drivers (Daniel) v3: Squash in the revert and rewrite the commit msg (Daniel) Cc: martin.peres@free.fr Cc: chris@chris-wilson.co.uk Cc: Dave Airlie <airlied@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #pre-squash Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
José Roberto de Souza authored
[ Upstream commit 4f212e40 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Kirill Marinushkin authored
[ Upstream commit 933e1c4a ] Clock gating parameter is a part of `dai_fmt`. It is supported by `alsa-lib` when creating a topology binary file, but ignored by kernel when loading this topology file. After applying this commit, the clock gating parameter is not ignored any more. This solution is backwards compatible. The existing behaviour is not broken, because by default the parameter value is 0 and is ignored. snd_soc_tplg_hw_config.clock_gated = 0 => no effect snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT For example, the following config, based on alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported: ~~~~ SectionHWConfig."CodecHWConfig" { id "1" format "I2S" # physical audio format. pm_gate_clocks "true" # clock can be gated } SectionLink."Codec" { # used for binding to the physical link id "0" hw_configs [ "CodecHWConfig" ] default_hw_conf_id "1" } ~~~~ Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: Pan Xiuli <xiuli.pan@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Cc: linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kirill Marinushkin authored
[ Upstream commit a941e2fa ] The values of bclk and fsync are inverted WRT the codec. But the existing solution already works for Broadwell, see the alsa-lib config: `alsa-lib/src/conf/topology/broadwell/broadwell.conf` This commit provides the backwards-compatible solution to fix this misuse. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Tested-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit 90db5c82 ] The annotations there are wrong as warned: drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types) drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit ad4222a0 ] The __user annotations at the compat32 code is not right: drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: expected void *base drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: expected unsigned int [usertype] *xcoords_y drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: expected unsigned int [usertype] *ycoords_y drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: expected unsigned int [usertype] *xcoords_uv drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: expected unsigned int [usertype] *ycoords_uv drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: expected unsigned int [usertype] *effective_width drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: expected unsigned int [usertype] *effective_width drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: expected struct v4l2_framebuffer *frame drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: expected unsigned short *calb_grp_values drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:701:39: warning: cast removes address space of expression drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: warning: incorrect type in argument 1 (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: expected void const volatile [noderef] <asn:1>*<noident> drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: got unsigned int [usertype] *src drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: expected struct atomisp_shading_table *shading_table drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: warning: incorrect type in argument 1 (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: expected void [noderef] <asn:1>*to drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: got struct atomisp_shading_table *shading_table drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: expected struct atomisp_morph_table *morph_table drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: warning: incorrect type in argument 1 (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: expected void [noderef] <asn:1>*to drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: got struct atomisp_morph_table *morph_table drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: expected struct atomisp_dvs2_coefficients *dvs2_coefs drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: warning: incorrect type in argument 1 (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: expected void [noderef] <asn:1>*to drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: got struct atomisp_dvs2_coefficients *dvs2_coefs drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: expected struct atomisp_dvs_6axis_config *dvs_6axis_config drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: got void [noderef] <asn:1>* drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: warning: incorrect type in argument 1 (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: expected void [noderef] <asn:1>*to drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: got struct atomisp_dvs_6axis_config *dvs_6axis_config drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: warning: incorrect type in assignment (different address spaces) drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: expected struct atomisp_sensor_ae_bracketing_lut_entry *lut drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: got void [noderef] <asn:1>* Signed-off-by:
-
Matthew R. Ochs authored
[ Upstream commit 465891fe ] The SISLite specification originally defined the context control register with a single field of bits to represent the LISN and also stipulated that the register reset value be 0. The cxlflash driver took advantage of this when programming the LISN for the master contexts via an unconditional write - no other bits were preserved. When unmap support was added, SISLite was updated to define bit 0 of the context control register as a way for the AFU to notify the context owner that unmap operations were supported. Thus the assumptions under which the register is setup changed and the existing unconditional write is clobbering the unmap state for master contexts. This is presently not an issue due to the order in which the context control register is programmed in relation to the unmap bit being queried but should be addressed to avoid a future regression in the event this code is moved elsewhere. To remedy this issue, preserve the bits when programming the LISN field in the context control register. Since the LISN will now be programmed using a read value, assert that the initial state of the LISN field is as described in SISLite (0). Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Uma Krishnan authored
[ Upstream commit a3feb6ef ] The following Oops can be encountered if a device removal or system shutdown is initiated while an EEH recovery is in process: [c000000ff2f479c0] c008000015256f18 cxlflash_pci_slot_reset+0xa0/0x100 [cxlflash] [c000000ff2f47a30] c00800000dae22e0 cxl_pci_slot_reset+0x168/0x290 [cxl] [c000000ff2f47ae0] c00000000003ef1c eeh_report_reset+0xec/0x170 [c000000ff2f47b20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170 [c000000ff2f47bb0] c00000000003f80c eeh_handle_normal_event+0x56c/0x580 [c000000ff2f47c60] c00000000003fba4 eeh_handle_event+0x2a4/0x338 [c000000ff2f47d10] c0000000000400b8 eeh_event_handler+0x1f8/0x200 [c000000ff2f47dc0] c00000000013da48 kthread+0x1a8/0x1b0 [c000000ff2f47e30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4 The remove handler frees AFU memory while the EEH recovery is in progress, leading to a race condition. This can result in a crash if the recovery thread tries to access this memory. To resolve this issue, the cxlflash remove handler will evaluate the device state and yield to any active reset or probing threads. Signed-off-by:
-
Shivasharan S authored
[ Upstream commit 3239b8cd ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit 37b37d26 ] SGI/TP9100 is not an RDAC array: ^^^ https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235 This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac : Consolidate rdac strings together") [mkp: fixed up the new entries to align with rest of struct] Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 02f37039 ] In of_get_regulation_constraints() we were taking the result of of_map_mode() (an unsigned int) and assigning it to an int. We were then checking whether this value was -EINVAL. Some implementers of of_map_mode() were returning -EINVAL (even though the return type of their function needed to be unsigned int) because they needed to signal an error back to of_get_regulation_constraints(). In general in the regulator framework the mode is always referred to as an unsigned int. While we could fix this to be a signed int (the highest value we store in there right now is 0x8), it's actually pretty clean to just define the regulator mode 0x0 (the lack of any bits set) as an invalid mode. Let's do that. Fixes: 5e5e3a42 ("regulator: of: Add support for parsing initial and suspend modes") Suggested-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Suman Anna authored
[ Upstream commit b7e1e685 ] The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware ARM DMA backend. The current code creates a dma_iommu_mapping and attaches this to the ISP device, but never detaches the mapping in either the probe failure paths or the driver remove path resulting in an unbalanced mapping refcount and a memory leak. Fix this properly. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Suman Anna <s-anna@ti.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
[ Upstream commit ad2fdcdf ] In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tudor-Dan Ambarus authored
[ Upstream commit 31545df3 ] In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Dominik Bozek authored
[ Upstream commit 5d111f51 ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
Michal Simek authored
[ Upstream commit ece97f3a ] simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Andrey Smirnov authored
[ Upstream commit 050f810e ] Platform device core assumes the ownership of dev.platform_data as well as that it is dynamically allocated and it will try to kfree it as a part of platform_device_release(). Change the code to use platform_device_add_data() n instead of a pointer to a static memory to avoid causing a BUG() when calling platform_device_put(). The problem can be reproduced by artificially enabling the error path of platform_device_add() call (around line 357). Note that this change also allows us to constify imx7_pgc_domains, since we no longer need to be able to modify it. Cc: Stefan Agner <stefan@agner.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit c1c734cb ] As part of bringup I ended up wanting to call an earlycon driver by a name that was exactly 16-bytes big, specifically "qcom_geni_serial". Unfortunately, when I tried this I found that things compiled just fine. They just didn't work. Specifically the compiler felt perfectly justified in initting the ".name" field of "struct earlycon_id" with the full 16-bytes and just skipping the '\0'. Needless to say, that behavior didn't seem ideal, but I guess someone must have allowed it for a reason. One way to fix this is to shorten the name field to 15 bytes and then add an extra byte after that nobody touches. This should always be initted to 0 and we're golden. There are, of course, other ways to fix this too. We could audit all the users of the "name" field and make them stop at both null termination or at 16 bytes. We could also just make the name field much bigger so that we're not likely to run into this. ...but both seem like we'll just hit the bug again. Signed-off-by:
-
NeilBrown authored
[ Upstream commit d8caf662 ] ldlm_lock_create() gets a resource, but don't put it on all failure paths. It should. Signed-off-by:
NeilBrown <neilb@suse.com> Reviewed-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
James Simmons authored
[ Upstream commit 1b60f6df ] In ll_xattr_set_common() detect the removexattr() case correctly by testing for a NULL value as well as XATTR_REPLACE. Signed-off-by:
John L. Hammond <john.hammond@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787 Reviewed-on: https://review.whamcloud.com/Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
James Simmons <uja.ornl@yahoo.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 8113b89f ] The bail out branch in case of a invalid tx_pos missed a semaphore release. Dan Carpenter found this with a static checker. Fixes: d1eab9de ("staging: vchiq_core: Bail out in case of invalid tx_pos") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Ondrej Mosnáček authored
[ Upstream commit 23bcc480 ] Current implementation of auditing by executable name only implements the 'equal' operator. This patch extends it to also support the 'not equal' operator. See: https://github.com/linux-audit/audit-kernel/issues/53Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Siva Rebbagondla authored
[ Upstream commit f7005466 ] Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Siva Rebbagondla authored
[ Upstream commit 78e45071 ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
-
Chris Novakovic authored
[ Upstream commit 300eec7c ] ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by:
Chris Novakovic <chris@chrisn.me.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit 2ea00909 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Vinicius Costa Gomes authored
[ Upstream commit 4dc93fcf ] On the RAH registers there are semantic differences on the meaning of the "queue" parameter for traffic steering depending on the controller model: there is the 82575 meaning, which "queue" means a RX Hardware Queue, and the i350 meaning, where it is a reception pool. The previous behaviour was having no effect for i210 based controllers because the QSEL bit of the RAH register wasn't being set. This patch separates the condition in discrete cases, so the different handling is clearer. Fixes: 83c21335 ("igb: improve MAC filter handling") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit 7c8b77f8 ] Heiko Stübner justified pretty well the change in commit e330eb86 ("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This change is also needed for arm64 rockchip boards, so, do the same for arm64. The io-domain driver is necessary to notify the soc about voltages changes happening on supplying regulators. Probably the most important user right now is the mmc tuning code, where the soc needs to get notified when the voltage is dropped to the 1.8V point. As this option is necessary to successfully tune UHS cards etc, it should get built in. Otherwise, tuning will fail with, dwmmc_rockchip fe320000.dwmmc: All phases bad! mmc0: tuning execution failed: -5 Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Wei Xu authored
[ Upstream commit ea48e877 ] Add a new lightnvm quirk to identify CNEX’s Granby controller. Signed-off-by:
Wei Xu <wxu@cnexlabs.com> Reviewed-by:
Javier González <javier@cnexlabs.com> Reviewed-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 1c74d5c0 ] Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit bf3fbdfb ] The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 02acc80d ] try_to_wake_up() might invoke delayacct_blkio_end() while holding the pi_lock (which is a raw_spinlock_t). delayacct_blkio_end() acquires task_delay_info.lock which is a spinlock_t. This causes a might sleep splat on -RT where non raw spinlocks are converted to 'sleeping' spinlocks. task_delay_info.lock is only held for a short amount of time so it's not a problem latency wise to make convert it to a raw spinlock. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Balbir Singh <bsingharora@gmail.com> Link: https://lkml.kernel.org/r/20180423161024.6710-1-bigeasy@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
[ Upstream commit de5b55c1 ] Use raw-locks in stop_machine() to allow locking in irq-off and preempt-disabled regions on -RT. This also documents the possible locking context in general. [bigeasy: update patch description.] Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit bb084c0f ] The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the GPIOF_* flags. The docs were fixed with commit 94fc7309 ("gpio: correct docs about return value of gpiod_get_direction"). Now, fix this user (until a better, system-wide solution is in place). Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Yixun Lan authored
[ Upstream commit 7e5d05e1 ] We need to introduce a new compatible name for the Meson-AXG SoC in order to support the RMII 100M ethernet PHY, since the PRG_ETH0 register of the dwmac glue layer is changed from previous old SoC. Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 38e62046 ] This patch fixes the handling of the check when number of vports are detected to be more than available TPQs. Current handling causes an out of bounds access in hclge_map_tqp(). Fixes: 7df7dad6 ("net: hns3: Refactor the mapping of tqp to vport") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit ded5fa4e ] If devm_spi_register_master() fails in meson_spicc_probe(), spicc->core is left undisabled. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
