- 11 Feb, 2016 15 commits
-
-
Siva Reddy Kallam authored
Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Tang authored
This patch fixes the checkpatch.pl error to bpf_dbg.c: ERROR: do not initialise statics to 0 Signed-off-by:
Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add support for filtering link dumps by master device and kind, similar to the filtering implemented for neighbor dumps. Each net_device that exists adds between 1196 bytes (eth) and 1556 bytes (bridge) to the link dump. As the number of interfaces increases so does the amount of data pushed to user space for a link list. If the user only wants to see a list of specific devices (e.g., interfaces enslaved to a specific bridge or a list of VRFs) most of that data is thrown away. Passing the filters to the kernel to have only relevant data returned makes the dump more efficient. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Craig Gallek says: ==================== Faster SO_REUSEPORT for TCP This patch series complements an earlier series (6a5ef90c) which added faster SO_REUSEPORT lookup for UDP sockets by extending the feature to TCP sockets. It uses the same array-based data structure which allows for socket selection after finding the first listening socket that matches an incoming packet. Prior to this feature, every socket in the reuseport group needed to be found and examined before a selection could be made. With this series the SO_ATTACH_REUSEPORT_CBPF and SO_ATTACH_REUSEPORT_EBPF socket options now work for TCP sockets as well. The test at the end of the series includes an example of how to use these options to select a reuseport socket based on the cpu core id handling the incoming packet. There are several refactoring patches that precede the feature implementation. Only the last two patches in this series should result in any behavioral changes. v4 - Fix build issue when compiling IPv6 as a module. This required moving the ipv6_rcv_saddr_equal into an object that is included as a built-in object. I included this change in the second patch which adds inet6_hash since that is where ipv6_rcv_saddr_equal will later be called from non-module code. v3: - Another warning in the first patch caught by a build bot. Return 0 in the no-op UDP hash function. v2: - In the first patched I missed a couple of hash functions that should now be returning int instead of void. I missed these the first time through as it only generated a warning and not an error :\ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
Unfortunately the existing test relied on packet payload in order to map incoming packets to sockets. In order to get this to work with TCP, TCP_FASTOPEN needed to be used. Since the fast open path is slightly different than the standard TCP path, I created a second test which sends to reuseport group members based on receiving cpu core id. This will probably serve as a better real-world example use as well. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
This change extends the fast SO_REUSEPORT socket lookup implemented for UDP to TCP. Listener sockets with SO_REUSEPORT and the same receive address are additionally added to an array for faster random access. This means that only a single socket from the group must be found in the listener list before any socket in the group can be used to receive a packet. Previously, every socket in the group needed to be considered before handing off the incoming packet. This feature also exposes the ability to use a BPF program when selecting a socket from a reuseport group. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
Both of the lines in this patch probably should have been included in the initial implementation of this code for generic socket support, but weren't technically necessary since only UDP sockets were supported. First, the sk_reuseport_cb points to a structure which assumes each socket in the group has this pointer assigned at the same time it's added to the array in the structure. The sk_clone_lock function breaks this assumption. Since a child socket shouldn't implicitly be in a reuseport group, the simple fix is to clear the field in the clone. Second, the SO_ATTACH_REUSEPORT_xBPF socket options require that SO_REUSEPORT also be set first. For UDP sockets, this is easily enforced at bind-time since that process both puts the socket in the appropriate receive hlist and updates the reuseport structures. Since these operations can happen at two different times for TCP sockets (bind and listen) it must be explicitly checked to enforce the use of SO_REUSEPORT with SO_ATTACH_REUSEPORT_xBPF in the setsockopt call. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
This is a preliminary step to allow fast socket lookup of SO_REUSEPORT groups. Doing so with a BPF filter will require access to the skb in question. This change plumbs the skb (and offset to payload data) through the call stack to the listening socket lookup implementations where it will be used in a following patch. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
tcp_hdrlen is wasteful if you already have a pointer to struct tcphdr. This splits the size calculation into a helper function that can be used if a struct tcphdr is already available. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
In order to support fast lookups for TCP sockets with SO_REUSEPORT, the function that adds sockets to the listening hash set needs to be able to check receive address equality. Since this equality check is different for IPv4 and IPv6, we will need two different socket hashing functions. This patch adds inet6_hash identical to the existing inet_hash function and updates the appropriate references. A following patch will differentiate the two by passing different comparison functions to __inet_hash. Additionally, in order to use the IPv6 address equality function from inet6_hashtables (which is compiled as a built-in object when IPv6 is enabled) it also needs to be in a built-in object file as well. This moves ipv6_rcv_saddr_equal into inet_hashtables to accomplish this. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
In order to support fast reuseport lookups in TCP, the hash function defined in struct proto must be capable of returning an error code. This patch changes the function signature of all related hash functions to return an integer and handles or propagates this return value at all call sites. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Here you have a batch of patches by Sven Eckelmann that drops our private reference counting implementation and substitutes it with the kref objects/functions. Then you have a patch, by Simon Wunderlich, that makes the broadcast protection window code more generic so that it can be re-used in the future by other components with different requirements. Lastly, Sven is also introducing two lockdep asserts in functions operating on our TVLV container list, to make sure that the proper lock is always acquired by the users. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ajit Khaparde says: ==================== be2net Patch series Please consider applying these two patches to net-next Patch-1: Request RSS capability of Rx interface depending on number of Rx rings Patch-2: Interpret and log new data that's added to the port misconfigure async event ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
>From FW version 11.0. onwards, the PORT_MISCONFIG event generated by the FW will carry more information about the event in the "data_word1" and "data_word2" fields. This patch adds support in the driver to parse the new information and log it accordingly. This patch also changes some of the messages that are being logged currently. Signed-off-by:
Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by:
Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Currently we request RSS capability even if a single Rx ring is created. As a result in few cases we unnecessarily consume an RSS capable interface which is a limited resource in the chip. This patch enables RSS on an interface only if more than one Rx ring is created. Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Feb, 2016 25 commits
-
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batadv_tvlv_container* functions state in their kernel-doc that they require tvlv.container_list_lock. Add an assert to automatically detect when this might have been ignored by the caller. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Simon Wunderlich authored
To allow future use of the window protected function with different maximum sequence numbers, add a parameter to set this value which was previously hardcoded. Another parameter added for future use is a flag to return whether the protection window has started. While at it, also fix the kerneldoc. Signed-off-by:
Simon Wunderlich <simon@open-mesh.com> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The references to the network device should be dropped inside the release function for batadv_hard_iface similar to what is done with the batman-adv internal datastructures. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Jean Sacren authored
Remove the unused code of sxgbe_xpcs. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Suggested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Cc: Byungho An <bh74.an@samsung.com> Cc: Girish K S <ks.giri@samsung.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1601191918470.2531@hadrienSigned-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== Factor out register bit twiddling in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net-next.git' repo. We factor out the often repeated pattern of reading a register, AND'ing and/or OR'ing some bits, and then writing the value back. [1/2] ravb: factor out register bit twiddling code [2/2] sh_eth: factor out register bit twiddling code ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The driver has often repeated pattern of reading a register, AND'ing and/or OR'ing some bits and writing the value back. Factor the pattern out into sh_eth_modify() -- this saves 84 bytes of code with ARM gcc 4.7.3. While at it, update Cogent Embedded's copyright. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The driver has often repeated pattern of reading a register, AND'ing and/or OR'ing some bits and writing the value back. Factor the pattern out into ravb_modify() -- this saves 260 bytes of code with ARM gcc 4.7.3. While at it, update Cogent Embedded's copyrights. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-