- 12 Apr, 2012 4 commits
-
-
Ben Widawsky authored
RC6 residency should be in intervals of 1.28us, and the counter wraps. Here is an example using awk to get the various RC6 and RC6+ residency times in seconds, since boot. cat /sys/kernel/debug/dri/0/i915_drpc_info | grep residency | awk -F':' -F' ' '{print $5 * 1.28 / 1000000}' This is primarily for QA, but has other applications as well. An upcoming patch to add interfaces should be more interesting to application developers. v2: move comment to the correct place v3: display with %u instead of %d, for Ouping CC: Ouping Zhang <ouping.zhang@intel.com> Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel Vetter wrote First pull request for 3.5-next, slightly large than usual because new things kept coming in since the last pull for 3.4. Highlights: - first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci ids are not yet added, and there's still quite a few patches to merge (mostly modesetting). To make QA easier I've decided to merge this stuff in pieces. - loads of cleanups and prep patches spurred by the above. Especially vlv is a real frankenstein chip, but also hsw is stretching our driver's code design. Expect more to come in this area for 3.5. - more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again, there are more patches needed (and some already queued up), but I wanted to split this a bit for better testing. - pwrite/pread rework and retuning. This series has been in the works for a few months already and a lot of i-g-t tests have been created for it. Now it's finally ready to be merged. Note that one patch in this series touches include/pagemap.h, that patch is acked-by akpm. - reduce mappable pressure and relocation throughput improvements from Chris. - mmap offset exhaustion mitigation by Chris Wilson. - a start at figuring out which codepaths in our messy dri1/ums+gem/kms driver we actually need to support by bailing out of unsupported case. The driver now refuses to load without kms on gen6+ and disallows a few ioctls that userspace never used in certain cases. More of this will definitely come. - More decoupling of global gtt and ppgtt. - Improved dual-link lvds detection by Takashi Iwai. - Shut up the compiler + plus fix the fallout (Ben) - Inverted panel brightness handling (mostly Acer manages to break things in this way). - Small fixlets and adjustements and some minor things to help debugging. Regression-wise QA reported quite a few issues on ivb, but all of them turned out to be hw stability issues which are already fixed in drm-intel-fixes (QA runs the nightly regression tests on -next alone, without -fixes automatically merged in). There's still one issue open on snb, it looks like occlusion query writes are not quite as cache coherent as we've expected. With some of the pwrite adjustements we can now reliably hit this. Kernel workaround for it is in the works." * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits) drm/i915: VCS is not the last ring drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2 drm/i915: make quirks more verbose drm/i915: dump the DMA fetch addr register on pre-gen6 drm/i915/sdvo: Include YRPB as an additional TV output type drm/i915: disallow gem init ioctl on ilk drm/i915: refuse to load on gen6+ without kms drm/i915: extract gt interrupt handler drm/i915: use render gen to switch ring irq functions drm/i915: rip out old HWSTAM missed irq WA for vlv drm/i915: open code gen6+ ring irqs drm/i915: ring irq cleanups drm/i915: add SFUSE_STRAP registers for digital port detection drm/i915: add WM_LINETIME registers drm/i915: add WRPLL clocks drm/i915: add LCPLL control registers drm/i915: add SSC offsets for SBI access drm/i915: add port clock selection support for HSW drm/i915: add S PLL control drm/i915: add PIXCLK_GATE register ... Conflicts: drivers/char/agp/intel-agp.h drivers/char/agp/intel-gtt.c drivers/gpu/drm/i915/i915_debugfs.c
-
Dave Airlie authored
On coherent systems (not-AGP) the IB should be in cached memory so should be just as fast, so we can avoid copying to temporary pages and just use it directly. provides minor speedups on rv530: gears ~1820->1860, ipers: 29.9->30.6, but always good to use less CPU if we can. v3: cleanup unneeded bits. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This closes a race seen with kexec where we enable PCI bus mastering but the card has been reinitialised fully yet. This was previously fixed by a patch from Jerome, but this should close the race completely. v2: add SI support as suggested by Alex. Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 09 Apr, 2012 31 commits
-
-
Ben Widawsky authored
I made a mistake, please forgive me. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48254Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
When booting with EFI, Apple botched this one up. v2: Switch the quirk dmesg output to DRM_INFO. v3: Actually git add the new things ... Tested-by:
Austin Lund <austin.lund@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42842Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
And add informational dmesg output where it does not yet exist. In case a quirk matches too much, this information is crucial for debugging such a bug report. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
It exists way back to gen2, bug got moved around on gen4 a bit. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Reported-and-tested-by: Bo Wang < bo.b.wang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Ums is already disabled, but on ilk we can additionally disable gem initialization when using user mode setting. Upstream never support ilk without kernel modesetting and not even the RHEL ilk ums backport needs gem - that driver is based on xf86-video-intel version 2.2, which is pre-gem. Reviewed-by:
Adam Jackson <ajax@redhat.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Spurred by an irc discussion, let's start to clear up which parts of our kms + ums/gem + ums/dri1 + vbios/dri1 kernel driver pieces userspace in the wild actually uses. The idea is that we introduce checks at entry-points (module load time, ioctls, ...) first and then reap any obviously dead code in a second step. As a first step refuse to load without kms on chips where userspace never supported ums. Now upstream hasn't supported ums on ilk, ever. But RHEL had the great idea to backport the kms support to their ums driver. Cc: Dave Airlie <airlied@gmail.com> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
vlv, ivb and snb all share the gen6+ gt irq handling. 3 copies of the same stuff is a bit much, so extract it into a little helper. Now ilk has a different gt irq handling than snb, but shares the same irq handler (due to the similar display block). So also extract the ilk gt irq handling to clearly separate these two things. Nice side effect of this is that we can complete Ben Widawsky's gen6+ irq bit #define cleanup and call the render irq also with the GEN6 alias. Beforehand that code was shared with ilk, and neither option really made much sense. As a bonus this enables the error interrupt handling lifted from the vlv code on snb and ivb, too. Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Antagonized-by:
Ben Widawsky <ben@bwidawsk.net> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Top-level interrupt bits are usually found in the display block. It therefore makes sense to use HAS_PCH_SPLIT in i915_irq.c But the irq stuff in intel_ring.c only concerns itself with render core/gt-level interrupt sources. It therefore makes more sense to switch based on gpu gen. Kills a vlv special case. Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This got copy-pasted from an older version. The newer kinds of workarounds don't need this anymore. Shame on me for not noticing when picking up the vlv irq patch. Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
We can now open-code the get/put irq functions as they were just abstracting single register definitions. It would be nice to merge this in with the IRQ handling code... but that is too much work for me at present. In addition I could probably collapse this in to a lot of the Ironlake stuff, but I don't think it's worth the potential regressions. This patch itself should not effect functionality. CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
- gen6 put/get only need one argument rflags and gflags are always the same (see above explanation) - remove a couple redundantly defined IRQs - reordered some lines to make things go in descending order Every ring has its own interrupts, enables, masks, and status bits that are fed into the main interrupt enable/mask/status registers. At one point in time it seemed like a good idea to make our functions support the notion that each interrupt may have a different bit position in the corresponding register (blitter parser error may be bit n in IMR, but bit m in blitter IMR). It turned out though that the HW designers did us a solid on Gen6+ and this unfortunate situation has been avoided. This allows our interrupt code to be cleaned up a bit. I jammed this into one commit because there should be no functional change with this commit, and staging it into multiple commits was unnecessarily artificial IMO. CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: - fixed up merged conflict with vlv changes. - added GEN6 to GT blitter bit, we only use it on gen6+. - added a comment to both ring irq bits and GT irq bits that on gen6+ these alias. - added comment that GT_BSD_USER_INTERRUPT is ilk-only. - I've got confused a bit that we still use GT_USER_INTERRUPT on ivb for the render ring - but this goes back to ilk where we have only gt interrupt bits and so we be equally confusing if changed.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
DDIA is detected via the DDI_BUF_CTL registers bit 0, but for DDIB, DDIC and DDID we need to consult SFUSE_STRAP values. Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Watermark line time registers for display low power watermark. v2: improve bit names as suggested by Chris Wilson Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
The WR PLL can drive the DDI ports at fixed frequencies for HDMI, DVI, DP and FDI. Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Those are used to control the display core clock. v2: change the enable bit setting, spotted by Rodrigo Vivi. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Different registers are identified by their target id and offset. To simplify their programming, they are called as <RegisterName><TargetId>. For example, SSCCTL register accessed through SBI at target id 6 and offset 0c is called SBI_SSCCTL6. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Multiple clocks can drive different outputs. v2: use the port enums to access individual ports v1 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This PLL control can drive DDI ports at desired frequencies for DisplayPort and FDI connections. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Pixel clock gating control for Lynx point. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Those are responsible for the Sideband Interface programming. v2: rename SBI bits to better reflect their meaning Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Those registers are used to train DDI buffer translations for each link type. v2: access each port registers through the DDI_BUF_TRANS macro Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
There is one instance of those registers for each DDI port. v2: access registers via the DDI_BUF_CTL() macro Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
There is one set of those registers for each port. Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This is one set of those registers for each pipe. v2: use port enum to access individual registers Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
There is one set of such registers for each pipe (A/B/C/EDP). v2: update to use DDI PORTS enum v1 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
There are 5 DDI ports on Haswell. Port A is always enabled, and is the one connected to eDP, and Port E is the one that can be connected to the PCH using FDI protocol. Ports B, C, D and E can be used for digital outputs. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This defines the registers used by different power wells. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This adds product definitions for desktop, mobile and server boards. v2: split into a separate patch, add .has_pch_split feature. Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
The macro is becoming too complex and with VLV upon us it can lead to confusion. So transforming this into a feature check instead. Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: fixed conflict with is_valleyview addition.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 Apr, 2012 1 commit
-
-
Linus Torvalds authored
-
- 07 Apr, 2012 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull two more small regmap fixes from Mark Brown: - Now we have users for it that aren't running Android it turns out that regcache_sync_region() is much more useful to drivers if it's exported for use by modules. Who knew? - Make sure we don't divide by zero when doing debugfs dumps of rbtrees, not visible up until now because everything was providing at least some cache on startup. * tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent division by zero in rbtree_show regmap: Export regcache_sync_region()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull a few KVM fixes from Avi Kivity: "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated), and a small build fix." * 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Resolve RCU vs. async page fault problem KVM: VMX: vmx_set_cr0 expects kvm->srcu locked KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr() KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fixlet from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: sysctl: fix write access to dmesg_restrict/kptr_restrict
-