- 06 Jul, 2015 22 commits
-
-
Hans de Goede authored
The ba10-tvbox has the otg controller connected to one of the 2 usb-A receptacles it has on the front, so enable the otg controller in host-only mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
u-boot will have turned on the power to the usb host ports, so mark them as regulator-boot-on, this stops the power on the ports from temporarily getting turned off during boot, causing issues with e.g. usb powered harddisks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Karsten Merker authored
Document the the "msi" (Micro-Star International Co. Ltd.) vendor prefix which is used in sun6i-a31s-primo81.dts. Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets. The v1.2 version can be used with either an A23 or A33 SoC. This version features 512 MB DRAM, 4G NAND, MMC, LCD, capacitive touchscreen, accelerometer, 2 camera sensors, USB OTG, microphone and speakers. i2c0 is connected to the gsl1680 capacitive touch panel controller, i2c1 is connected to an mma7660 3-axis accelerometer, these peripherals are not supported by the kernel yet, i2c bus functionality has been tested via i2c-dev. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Removed the resolution mention, and modified the compatible to have a unique one with the A23 version] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The Sina33 SDK board exposes the EHCI/OHCI USB host pair. VBUS for this port is always on and non-controllable. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The GA10H tablets not only have an otg connector, but also a normal usb host connector, enabled support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg controller on GA10H-A33 tablets, for now it is enabled in host-only mode, because true OTG support requires support for detecting and enabling Vbus through the axp221 pmic. For this to work the Vbus on the port must be enabled by u-boot, or a powered hub must be used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg controller on Ippo Q8H tablets, for now it is enabled in host-only mode, because true OTG support requires support for detecting and enabling Vbus through the axp221 pmic. For this to work the Vbus on the port must be enabled by u-boot, or a powered hub must be used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg/drc usb controller on the A20-OLinuxIno-Micro. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg/drc usb controller on the A20-OLinuxIno-Lime. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Roman Byshko authored
Enable the otg/drc usb controller on the cubietruck. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Mele A1000G-quad has an usb to sata bridge connected to its otg controller, this commit enables support for this. Since the otg is hardwired to the sata bridge it gets enabled in host only mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the OTG controller on the UTOO P66 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg/drc usb controller on the Cubieboard. Note that the 5V of the otg is directly connected to the general 5V, so we only use the id pin. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Enable the otg/drc usb controller on the Chuwi V7 CW0825 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
A23/A33 has one pair of EHCI/OHCI USB controllers. There are 2 USB PHYs, one for the USB OTG controller, one for the EHCI/OHCI pair. The latter may also support HSIC, though none of the available boards utilize this, so this is not supported yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Note these are added to the sun8i-a33.dtsi file rather then to the shared sun8i-a23-a33.dtsi file as both the phy and the otg controller on the a33 are slightly different. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Note these are added to the sun8i-a23.dtsi file rather then to the shared sun8i-a23-a33.dtsi file as both the phy and the otg controller on the a33 are slightly different. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Roman Byshko authored
Add a node for the otg/drc usb controller to sun7i-a20.dtsi Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a node for the otg/drc usb controller to sun6i-a31.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a node for the otg/drc usb controller to sun5i-a1*.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a node for the otg/drc usb controller to sun4i-a10.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 05 Jul, 2015 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
-
Linus Torvalds authored
Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Jul, 2015 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
-
Al Viro authored
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
-
Al Viro authored
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Except for the preempt notifiers fix, these are all small bugfixes that could have been waited for -rc2. Sending them now since I was taking care of Peter's patch anyway" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: add hyper-v crash msrs values KVM: x86: remove data variable from kvm_get_msr_common KVM: s390: virtio-ccw: don't overwrite config space values KVM: x86: keep track of LVT0 changes under APICv KVM: x86: properly restore LVT0 KVM: x86: make vapics_in_nmi_mode atomic sched, preempt_notifier: separate notifier registration from static_key inc/dec
-
Dave Jiang authored
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Dave Jiang authored
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Dave Jiang authored
Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Dave Jiang authored
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-