1. 09 Aug, 2019 29 commits
  2. 08 Aug, 2019 1 commit
  3. 07 Aug, 2019 2 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 13dfb3fa
      David S. Miller authored
      Just minor overlapping changes in the conflicts here.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13dfb3fa
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 33920f1e
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Yeah I should have sent a pull request last week, so there is a lot
        more here than usual:
      
         1) Fix memory leak in ebtables compat code, from Wenwen Wang.
      
         2) Several kTLS bug fixes from Jakub Kicinski (circular close on
            disconnect etc.)
      
         3) Force slave speed check on link state recovery in bonding 802.3ad
            mode, from Thomas Falcon.
      
         4) Clear RX descriptor bits before assigning buffers to them in
            stmmac, from Jose Abreu.
      
         5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
            loops, from Nishka Dasgupta.
      
         6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
      
         7) Need to hold sock across skb->destructor invocation, from Cong
            Wang.
      
         8) IP header length needs to be validated in ipip tunnel xmit, from
            Haishuang Yan.
      
         9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
      
        10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
            Heiner Kallweit.
      
        11) Upon bridge device init failure, we need to delete the local fdb.
            From Nikolay Aleksandrov.
      
        12) Handle erros from of_get_mac_address() properly in stmmac, from
            Martin Blumenstingl.
      
        13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
            Kadlecsik.
      
        14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
            some devices, so revert. From Johannes Berg.
      
        15) Fix deadlock in rxrpc, from David Howells.
      
        16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
            Haibing.
      
        17) Fix mvpp2 crash on module removal, from Matteo Croce.
      
        18) Fix race in genphy_update_link, from Heiner Kallweit.
      
        19) bpf_xdp_adjust_head() stopped working with generic XDP when we
            fixes generic XDP to support stacked devices properly, fix from
            Jesper Dangaard Brouer.
      
        20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
            David Ahern.
      
        21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
        net: dsa: sja1105: Fix memory leak on meta state machine error path
        net: dsa: sja1105: Fix memory leak on meta state machine normal path
        net: dsa: sja1105: Really fix panic on unregistering PTP clock
        net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
        net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
        net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
        net: sched: sample: allow accessing psample_group with rtnl
        net: sched: police: allow accessing police->params with rtnl
        net: hisilicon: Fix dma_map_single failed on arm64
        net: hisilicon: fix hip04-xmit never return TX_BUSY
        net: hisilicon: make hip04_tx_reclaim non-reentrant
        tc-testing: updated vlan action tests with batch create/delete
        net sched: update vlan action for batched events operations
        net: stmmac: tc: Do not return a fragment entry
        net: stmmac: Fix issues when number of Queues >= 4
        net: stmmac: xgmac: Fix XGMAC selftests
        be2net: disable bh with spin_lock in be_process_mcc
        net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
        net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
        net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
        ...
      33920f1e
  4. 06 Aug, 2019 8 commits
    • David S. Miller's avatar
      Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 05bb5203
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      40GbE Intel Wired LAN Driver Updates 2019-08-05
      
      This series contains updates to i40e driver only.
      
      Dmitrii adds missing statistic counters for VEB and VEB TC's.
      
      Slawomir adds support for logging the "Disable Firmware LLDP" flag
      option and its current status.
      
      Jake fixes an issue where VF's being notified of their link status
      before their queues are enabled which was causing issues.  So always
      report link status down when the VF queues are not enabled.  Also adds
      future proofing when statistics are added or removed by adding checks to
      ensure the data pointer for the strings lines up with the expected
      statistics count.
      
      Czeslaw fixes the advertised mode reported in ethtool for FEC, where the
      "None BaseR RS" was always being displayed no matter what the mode it
      was in.  Also added logging information when the PF is entering or
      leaving "allmulti" (or promiscuous) mode.  Fixed up the logging logic
      for VF's when leaving multicast mode to not include unicast as well.
      
      v2: drop Aleksandr's patch (previously patch #2 in the series) to
          display the VF MAC address that is set by the VF while community
          feedback is addressed.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      05bb5203
    • Yifeng Sun's avatar
      openvswitch: Print error when ovs_execute_actions() fails · aa733660
      Yifeng Sun authored
      Currently in function ovs_dp_process_packet(), return values of
      ovs_execute_actions() are silently discarded. This patch prints out
      an debug message when error happens so as to provide helpful hints
      for debugging.
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa733660
    • David S. Miller's avatar
      Merge branch 'sja1105-fixes' · feac1d68
      David S. Miller authored
      Vladimir Oltean says:
      
      ====================
      Fixes for SJA1105 DSA: FDBs, Learning and PTP
      
      This is an assortment of functional fixes for the sja1105 switch driver
      targeted for the "net" tree (although they apply on net-next just as
      well).
      
      Patch 1/5 ("net: dsa: sja1105: Fix broken learning with vlan_filtering
      disabled") repairs a breakage introduced in the early development stages
      of the driver: support for traffic from the CPU has broken "normal"
      frame forwarding (based on DMAC) - there is connectivity through the
      switch only because all frames are flooded.
      I debated whether this patch qualifies as a fix, since it puts the
      switch into a mode it has never operated in before (aka SVL). But
      "normal" forwarding did use to work before the "Traffic support for
      SJA1105 DSA driver" patchset, and arguably this patch should have been
      part of that.
      Also, it would be strange for this feature to be broken in the 5.2 LTS.
      
      Patch 2/5 ("net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as
      well") is a simplification of a previous FDB-related patch that is
      currently in the 5.3 rc's.
      
      Patches 3/5 - 5/5 fix various crashes found while running linuxptp over the
      switch ports for extended periods of time, or in conjunction with other
      error conditions. The fixed-up commits were all introduced in 5.2.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      feac1d68
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix memory leak on meta state machine error path · 93fa8587
      Vladimir Oltean authored
      When RX timestamping is enabled and two link-local (non-meta) frames are
      received in a row, this constitutes an error.
      
      The tagger is always caching the last link-local frame, in an attempt to
      merge it with the meta follow-up frame when that arrives. To recover
      from the above error condition, the initial cached link-local frame is
      dropped and the second frame in a row is cached (in expectance of the
      second meta frame).
      
      However, when dropping the initial link-local frame, its backing memory
      was being leaked.
      
      Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93fa8587
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix memory leak on meta state machine normal path · f163fed2
      Vladimir Oltean authored
      After a meta frame is received, it is associated with the cached
      sp->data->stampable_skb from the DSA tagger private structure.
      
      Cached means its refcount is incremented with skb_get() in order for
      dsa_switch_rcv() to not free it when the tagger .rcv returns NULL.
      
      The mistake is that skb_unref() is not the correct function to use. It
      will correctly decrement the refcount (which will go back to zero) but
      the skb memory will not be freed.  That is the job of kfree_skb(), which
      also calls skb_unref().
      
      But it turns out that freeing the cached stampable_skb is in fact not
      necessary.  It is still a perfectly valid skb, and now it is even
      annotated with the partial RX timestamp.  So remove the skb_copy()
      altogether and simply pass the stampable_skb with a refcount of 1
      (incremented by us, decremented by dsa_switch_rcv) up the stack.
      
      Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f163fed2
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Really fix panic on unregistering PTP clock · 6cb0abbd
      Vladimir Oltean authored
      The IS_ERR_OR_NULL(priv->clock) check inside
      sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync
      from actually being run.
      
      Additionally, sja1105_ptp_clock_unregister() does not actually get run,
      when placed in sja1105_remove(). The DSA switch gets torn down, but the
      sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister
      needs to be moved to sja1105_teardown, to be symmetrical with
      sja1105_ptp_clock_register which is called from the DSA sja1105_setup.
      
      It is strange to fix a "fixes" patch, but the probe failure can only be
      seen when the attached PHY does not respond to MDIO (issue which I can't
      pinpoint the reason to) and it goes away after I power-cycle the board.
      This time the patch was validated on a failing board, and the kernel
      panic from the fixed commit's message can no longer be seen.
      
      Fixes: 29dd908d ("net: dsa: sja1105: Cancel PTP delayed work on unregister")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cb0abbd
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well · 4b7da3d8
      Vladimir Oltean authored
      It looks like the FDB dump taken from first-generation switches also
      contains information on whether entries are static or not. So use that
      instead of searching through the driver's tables.
      
      Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b7da3d8
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix broken learning with vlan_filtering disabled · 6d7c7d94
      Vladimir Oltean authored
      When put under a bridge with vlan_filtering 0, the SJA1105 ports will
      flood all traffic as if learning was broken. This is because learning
      interferes with the rx_vid's configured by dsa_8021q as unique pvid's.
      
      So learning technically still *does* work, it's just that the learnt
      entries never get matched due to their unique VLAN ID.
      
      The setting that saves the day is Shared VLAN Learning, which on this
      switch family works exactly as desired: VLAN tagging still works
      (untagged traffic gets the correct pvid) and FDB entries are still
      populated with the correct contents including VID. Also, a frame cannot
      violate the forwarding domain restrictions enforced by its classified
      VLAN. It is just that the VID is ignored when looking up the FDB for
      taking a forwarding decision (selecting the egress port).
      
      This patch activates SVL, and the result is that frames with a learnt
      DMAC are no longer flooded in the scenario described above.
      
      Now exactly *because* SVL works as desired, we have to revisit some
      earlier patches:
      
      - It is no longer necessary to manipulate the VID of the 'bridge fdb
        {add,del}' command when vlan_filtering is off. This is because now,
        SVL is enabled for that case, so the actual VID does not matter*.
      
      - It is still desirable to hide dsa_8021q VID's in the FDB dump
        callback. But right now the dump callback should no longer hide
        duplicates (one per each front panel port's pvid, plus one for the
        VLAN that the CPU port is going to tag a TX frame with), because there
        shouldn't be any (the switch will match a single FDB entry no matter
        its VID anyway).
      
      * Not really... It's no longer necessary to transform a 'bridge fdb add'
        into 5 fdb add operations, but the user might still add a fdb entry with
        any vid, and all of them would appear as duplicates in 'bridge fdb
        show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we
        can prune the duplicates at insertion time.
      
      ** The VID of 0 is better than 1 because it is always guaranteed to be
         in the ports' hardware filter. DSA also avoids putting the VID inside
         the netlink response message towards the bridge driver when we return
         this particular VID, which makes it suitable for FDB entries learnt
         with vlan_filtering off.
      
      Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarGeorg Waibel <georg.waibel@sensor-technik.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d7c7d94