- 11 Mar, 2023 3 commits
-
-
Xuan Zhuo authored
If the queue of xdp xmit is not an independent queue, then when the xdp xmit used all the desc, the xmit from the __dev_queue_xmit() may encounter the following error. net ens4: Unexpected TXQ (0) queue failure: -28 This patch adds a check whether sq is full in xdp xmit. Fixes: 56434a01 ("virtio_net: add XDP_TX support") Reported-by:
Yichun Zhang <yichun@openresty.com> Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xuan Zhuo authored
Separate the logic of checking whether sq is full. The subsequent patch will reuse this func. Signed-off-by:
-
Xuan Zhuo authored
The purpose of this is to facilitate the subsequent addition of new functions without introducing a separate declaration. Signed-off-by:
-
- 10 Mar, 2023 2 commits
-
-
Fedor Pchelkin authored
struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: <IRQ> __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9dab880d ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()") Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ruSigned-off-by:
-
Breno Leitao authored
tcp_rtx_synack() now could be called in process context as explained in 0a375c82 ("tcp: tcp_rtx_synack() can be called from process context"). tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU variables with preemption enabled. This causes the following BUG: BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464 caller is tcp_make_synack+0x841/0xac0 Call Trace: <TASK> dump_stack_lvl+0x10d/0x1a0 check_preemption_disabled+0x104/0x110 tcp_make_synack+0x841/0xac0 tcp_v6_send_synack+0x5c/0x450 tcp_rtx_synack+0xeb/0x1f0 inet_rtx_syn_ack+0x34/0x60 tcp_check_req+0x3af/0x9e0 tcp_rcv_state_process+0x59b/0x2030 tcp_v6_do_rcv+0x5f5/0x700 release_sock+0x3a/0xf0 tcp_sendmsg+0x33/0x40 ____sys_sendmsg+0x2f2/0x490 __sys_sendmsg+0x184/0x230 do_syscall_64+0x3d/0x90 Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use TCP_INC_STATS() which is safe to be called from context switch. Fixes: 8336886f ("tcp: TCP Fast Open Server - support TFO listeners") Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230308190745.780221-1-leitao@debian.orgSigned-off-by:
-
- 09 Mar, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: - Fix systems with memory at end of 32-bit address space - Fix initrd on systems where memory does not start at address zero - Fix 68030 handling of bus errors for addresses in exception tables * tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Only force 030 bus error if PC not in exception table m68k: mm: Move initrd phys_to_virt handling after paging_init() m68k: mm: Fix systems with memory at end of 32-bit address space
-
Al Viro authored
We fetch %SR value from sigframe; it might have been modified by signal handler, so we can't trust it with any bits that are not modifiable in user mode. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queuePaolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl: fix enum-as-flags in the generic CLI The CLI needs to use proper classes when looking at Enum definitions rather than interpreting the YAML spec ad-hoc, because we have more than on format of the definition supported. ==================== Link: https://lore.kernel.org/r/20230308003923.445268-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Lorenzo points out that the generic CLI is broken for the netdev family. When I added the support for documentation of enums (and sparse enums) the client script was not updated. It expects the values in enum to be a list of names, now it can also be a dict (YAML object). Reported-by:
Lorenzo Bianconi <lorenzo@kernel.org> Fixes: e4b48ed4 ("tools: ynl: add a completely generic client") Signed-off-by:
-
Jakub Kicinski authored
Move bulk of the EnumSet and EnumEntry code to shared code for reuse by cli. Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
When sock_alloc_file fails to allocate a file, it will call sock_release. __sys_socket_file should then not call sock_release again, otherwise there will be a double free. [ 89.319884] ------------[ cut here ]------------ [ 89.320286] kernel BUG at fs/inode.c:1764! [ 89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361 [ 89.321535] RIP: 0010:iput+0x1ff/0x240 [ 89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48 [ 89.322760] RSP: 0018:ffffbdd60068bd50 EFLAGS: 00010202 [ 89.323036] RAX: 0000000000000000 RBX: ffff9d7ad3cacac0 RCX: 0000000000001107 [ 89.323412] RDX: 000000000003af00 RSI: 0000000000000000 RDI: ffff9d7ad3cacb40 [ 89.323785] RBP: ffffbdd60068bd68 R08: ffffffffffffffff R09: ffffffffab606438 [ 89.324157] R10: ffffffffacb3dfa0 R11: 6465686361657256 R12: ffff9d7ad3cacb40 [ 89.324529] R13: 0000000080000001 R14: 0000000080000001 R15: 0000000000000002 [ 89.324904] FS: 00007f7b28516740(0000) GS:ffff9d7aeb1c0000(0000) knlGS:0000000000000000 [ 89.325328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.325629] CR2: 00007f0af52e96c0 CR3: 0000000002a02006 CR4: 0000000000770ee0 [ 89.326004] PKRU: 55555554 [ 89.326161] Call Trace: [ 89.326298] <TASK> [ 89.326419] __sock_release+0xb5/0xc0 [ 89.326632] __sys_socket_file+0xb2/0xd0 [ 89.326844] io_socket+0x88/0x100 [ 89.327039] ? io_issue_sqe+0x6a/0x430 [ 89.327258] io_issue_sqe+0x67/0x430 [ 89.327450] io_submit_sqes+0x1fe/0x670 [ 89.327661] io_sq_thread+0x2e6/0x530 [ 89.327859] ? __pfx_autoremove_wake_function+0x10/0x10 [ 89.328145] ? __pfx_io_sq_thread+0x10/0x10 [ 89.328367] ret_from_fork+0x29/0x50 [ 89.328576] RIP: 0033:0x0 [ 89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 89.329073] RSP: 002b:0000000000000000 EFLAGS: 00000202 ORIG_RAX: 00000000000001a9 [ 89.329477] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007f7b28637a3d [ 89.329845] RDX: 00007fff4e4318a8 RSI: 00007fff4e4318b0 RDI: 0000000000000400 [ 89.330216] RBP: 00007fff4e431830 R08: 00007fff4e431711 R09: 00007fff4e4318b0 [ 89.330584] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff4e441b38 [ 89.330950] R13: 0000563835e3e725 R14: 0000563835e40d10 R15: 00007f7b28784040 [ 89.331318] </TASK> [ 89.331441] Modules linked in: [ 89.331617] ---[ end trace 0000000000000000 ]--- Fixes: da214a47 ("net: add __sys_socket_file()") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 314001f0 ("af_unix: Add OOB support") Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com Signed-off-by:
-
Jakub Kicinski authored
This reverts commit d5e2d038. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038 ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.orgSigned-off-by:
-
Vladimir Oltean authored
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4faf ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6c ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a8 ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e079 ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
-
- 08 Mar, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull udf fixes from Jan Kara: "Fix bugs in UDF caused by the big pile of changes that went in during the merge window" * tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Warn if block mapping is done for in-ICB files udf: Fix reading of in-ICB files udf: Fix lost writes in udf_adinicb_writepage()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small set of assorted bug and build/warning fixes" * tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform: mellanox: mlx-platform: Initialize shift variable to 0 platform/x86: int3472: Add GPIOs to Surface Go 3 Board data platform/x86: ISST: Fix kernel documentation warnings platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it platform: mellanox: select REGMAP instead of depending on it platform/x86/intel/tpmi: Fix double free reported by Smatch platform/x86: ISST: Increase range of valid mail box commands platform/x86: dell-ddv: Fix temperature scaling platform/x86: dell-ddv: Fix cache invalidation on resume platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
-
Linus Torvalds authored
The implementation of 'current' on x86 is very intentionally special: it is a very common thing to look up, and it uses 'this_cpu_read_stable()' to get the current thread pointer efficiently from per-cpu storage. And the keyword in there is 'stable': the current thread pointer never changes as far as a single thread is concerned. Even if when a thread is preempted, or moved to another CPU, or even across an explicit call 'schedule()' that thread will still have the same value for 'current'. It is, after all, the kernel base pointer to thread-local storage. That's why it's stable to begin with, but it's also why it's important enough that we have that special 'this_cpu_read_stable()' access for it. So this is all done very intentionally to allow the compiler to treat 'current' as a value that never visibly changes, so that the compiler can do CSE and combine multiple different 'current' accesses into one. However, there is obviously one very special situation when the currently running thread does actually change: inside the scheduler itself. So the scheduler code paths are special, and do not have a 'current' thread at all. Instead there are _two_ threads: the previous and the next thread - typically called 'prev' and 'next' (or prev_p/next_p) internally. So this is all actually quite straightforward and simple, and not all that complicated. Except for when you then have special code that is run in scheduler context, that code then has to be aware that 'current' isn't really a valid thing. Did you mean 'prev'? Did you mean 'next'? In fact, even if then look at the code, and you use 'current' after the new value has been assigned to the percpu variable, we have explicitly told the compiler that 'current' is magical and always stable. So the compiler is quite free to use an older (or newer) value of 'current', and the actual assignment to the percpu storage is not relevant even if it might look that way. Which is exactly what happened in the resctl code, that blithely used 'current' in '__resctrl_sched_in()' when it really wanted the new process state (as implied by the name: we're scheduling 'into' that new resctl state). And clang would end up just using the old thread pointer value at least in some configurations. This could have happened with gcc too, and purely depends on random compiler details. Clang just seems to have been more aggressive about moving the read of the per-cpu current_task pointer around. The fix is trivial: just make the resctl code adhere to the scheduler rules of using the prev/next thread pointer explicitly, instead of using 'current' in a situation where it just wasn't valid. That same code is then also used outside of the scheduler context (when a thread resctl state is explicitly changed), and then we will just pass in 'current' as that pointer, of course. There is no ambiguity in that case. The fix may be trivial, but noticing and figuring out what went wrong was not. The credit for that goes to Stephane Eranian. Reported-by:
Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/ Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Tony Luck <tony.luck@intel.com> Tested-by:
Babu Moger <babu.moger@amd.com> Cc: stable@kernel.org Signed-off-by:
-
Daniel Machon authored
Fix deletion of existing DSCP mappings in the APP table. Adding and deleting DSCP entries are replicated per-port, since the mapping table is global for all ports in the chip. Whenever a mapping for a DSCP value already exists, the old mapping is deleted first. However, it is only deleted for the specified port. Fix this by calling sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be. Reproduce: // Map and remap DSCP value 63 $ dcb app add dev eth0 dscp-prio 63:1 $ dcb app add dev eth0 dscp-prio 63:2 $ dcb app show dev eth0 dscp-prio dscp-prio 63:2 $ dcb app show dev eth1 dscp-prio dscp-prio 63:1 63:2 <-- 63:1 should not be there Fixes: 8dcf69a6 ("net: microchip: sparx5: add support for offloading dscp table") Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Suman Ghosh authored
NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581cd ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Reviewed-by:
-
D. Wythe authored
Before determining whether the msg has unsupported options, it has been prematurely terminated by the wrong status check. For the application, the general usages of MSG_FASTOPEN likes fd = socket(...) /* rather than connect */ sendto(fd, data, len, MSG_FASTOPEN) Hence, We need to check the flag before state check, because the sock state here is always SMC_INIT when applications tries MSG_FASTOPEN. Once we found unsupported options, fallback it to TCP. Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback") Signed-off-by:
D. Wythe <alibuda@linux.alibaba.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
- 07 Mar, 2023 17 commits
-
-
Jakub Kicinski authored
I was intending to make all the Netlink Spec code BSD-3-Clause to ease the adoption but it appears that: - I fumbled the uAPI and used "GPL WITH uAPI note" there - it gives people pause as they expect GPL in the kernel As suggested by Chuck re-license under dual. This gives us benefit of full BSD freedom while fulfilling the broad "kernel is under GPL" expectations. Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/ Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.orgSigned-off-by:
-
Stephen Hemminger authored
Map all my old email addresses to current address. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20230306194405.108236-1-stephen@networkplumber.orgSigned-off-by:
-
Jakub Kicinski authored
Map Maxim's old corporate addresses to his personal one. Link: https://lore.kernel.org/r/20230306192018.3894988-1-kuba@kernel.orgSigned-off-by:
-
Fedor Pchelkin authored
cb_context should be freed on the error path in nfc_se_io as stated by commit 25ff6f8a ("nfc: fix memory leak of se_io context in nfc_genl_se_io"). Make the error path in nfc_se_io unwind everything in reverse order, i.e. free the cb_context after unlocking the device. Suggested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by:Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Swiatkowski authored
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions") Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Dave Ertman authored
When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73 ("ice: Add DSCP support") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Linus Torvalds authored
Commit 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations") changed cpumask_setall() to use "bitmap_set()" instead of "bitmap_fill()", because bitmap_fill() would explicitly set all the bits of a constant sized small bitmap, and that's exactly what we don't want: we want to only set bits up to 'nr_cpu_ids', which is what "bitmap_set()" does. However, Yury correctly points out that while "bitmap_set()" does indeed only set bits up to the required bitmap size, it doesn't _clear_ bits above that size, so the upper bits would still not have well-defined values. Now, none of this should really matter, since any bits set past 'nr_cpu_ids' should always be ignored in the first place. Yes, the bit scanning functions might return them as a result, but since users should always consider the ">= nr_cpu_ids" condition to mean "no more bits", that shouldn't have any actual effect (see previous commit 8ca09d5f "cpumask: fix incorrect cpumask scanning result checks"). But let's just do it right, the way the code was _intended_ to work. We have had enough lazy code that works but bites us in the *rse later (again, see previous commit) that there's no reason to not just do this properly. It turns out that "bitmap_fill()" gets this all right for the complex case, and really only fails for the inlined optimized case that just fills the whole word. And while we could just fix bitmap_fill() to use the proper last word mask, there's two issues with that: - the cpumask case wants to do the _optimization_ based on "NR_CPUS is a small constant", but then wants to do the actual bit _fill_ based on "nr_cpu_ids" that isn't necessarily that same constant - we have lots of non-cpumask users of bitmap_fill(), and while they hopefully don't care, and probably would want the proper semantics anyway ("only set bits up to the limit"), I do not want the cpumask changes to impact other parts So this ends up just doing the single-word optimization by hand in the cpumask code. If our cpumask is fundamentally limited to a single word, just do the proper "fill in that word" exactly. And if it's the more complex multi-word case, then the generic bitmap_fill() will DTRT. This is all an example of how our bitmap function optimizations really are somewhat broken. They conflate the "this is size of the bitmap" optimizations with the actual bit(s) we want to set. In many cases we really want to have the two be separate things: sometimes we base our optimizations on the size of the whole bitmap ("I know this whole bitmap fits in a single word, so I'll just use single-word accesses"), and sometimes we base them on the bit we are looking at ("this is just acting on bits that are in the first word, so I'll use single-word accesses"). Notice how the end result of the two optimizations are the same, but the way we get to them are quite different. And all our cpumask optimization games are really about that fundamental distinction, and we'd often really want to pass in both the "this is the bit I'm working on" (which _can_ be a small constant but might be variable), and "I know it's in this range even if it's variable" (based on CONFIG_NR_CPUS). So this cpumask_setall() implementation just makes that explicit. It checks the "I statically know the size is small" using the known static size of the cpumask (which is what that 'small_cpumask_bits' is all about), but then sets the actual bits using the exact number of cpus we have (ie 'nr_cpumask_bits') Of course, in a perfect world, the compiler would have done all the range analysis (possibly with help from us just telling it that "this value is always in this range"), and would do all of this for us. But that is not the world we live in. While we dream of that perfect world, this does that manual logic to make it all work out. And this was a very long explanation for a small code change that shouldn't even matter. Reported-by:
Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/Signed-off-by:
-
Enrico Sau authored
Add the following Telit FE990 composition: 0x1080: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by:
Enrico Sau <enrico.sau@gmail.com> Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.comSigned-off-by:
-
Enrico Sau authored
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990 0x1081 composition in order to avoid bind error. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Restore ctnetlink zero mark in events and dump, from Ivan Delalande. 2) Fix deadlock due to missing disabled bh in tproxy, from Florian Westphal. 3) Safer maximum chain load in conntrack, from Eric Dumazet. * 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: conntrack: adopt safer max chain length netfilter: tproxy: fix deadlock due to missing BH disable netfilter: ctnetlink: revert to dumping mark regardless of event type ==================== Link: https://lore.kernel.org/r/20230307100424.2037-1-pablo@netfilter.orgSigned-off-by:
-
Hans de Goede authored
Initialize shift variable in mlxplat_mlxcpld_verify_bus_topology() to 0 to avoid the following compile error: drivers/platform/x86/mlx-platform.c:6013 mlxplat_mlxcpld_verify_bus_topology() error: uninitialized symbol 'shift'. Fixes: 50b823fd ("platform: mellanox: mlx-platform: Move bus shift assignment out of the loop") Cc: Vadim Pasternak <vadimp@nvidia.com> Cc: Michael Shych <michaelsh@nvidia.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230307105842.286118-1-hdegoede@redhat.com
-
Daniel Scally authored
Add the INT347E GPIO lookup table to the board data for the Surface Go 3. This is necessary to allow the ov7251 IR camera to probe properly on that platform. Signed-off-by:
Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.comReviewed-by:
-
Srinivas Pandruvada authored
Fix warning displayed for "make W=1" for kernel documentation. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230211063257.311746-2-srinivas.pandruvada@linux.intel.comSigned-off-by:
-
Randy Dunlap authored
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: ef0f6226 ("platform/x86: mlx-platform: Add physical bus number auto detection") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". For NVSW_SN2201, select REGMAP_I2C instead of depending on it. Fixes: c6acad68 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver") Fixes: 62f9529b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Fixes: 662f2482 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by:
-
Srinivas Pandruvada authored
Fix warning: drivers/platform/x86/intel/tpmi.c:253 tpmi_create_device() warn: 'feature_vsec_dev' was already freed. If there is some error, feature_vsec_dev memory is freed as part of resource managed call intel_vsec_add_aux(). So, additional kfree() call is not required. Reordered res allocation and feature_vsec_dev, so that on error only res is freed. Reported-by:
-
