- 22 Jul, 2008 18 commits
-
-
Dhananjay Phadke authored
Enable tso6 and ipv6 checksum, interrupt coalescing for NX3031. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
NX3031 supports cut-through operation where ingress packets are directly dma'ed into host buffers to reduce latency. This requires larger dma buffers (2kb) and different alignemnt. The buffer posting logic is changed a bit. The free rx buffers are maintained in linked list, since the received reference handles can be out of order. However rx descriptors are still posted sequentially, indexed by producer. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
MAC addr, multicast filters, mtu are set through firmware commands in firmware v4.0.0+ because of virtualization of physical ports. Link status is also read from registers allocated by firmware for each virtual port. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Contains rx and tx ring context management and certain firmware commands for netxen firmware v4.0.0+. This patch gathers all HW context management code into netxen_nic_ctx.c. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
It had only couple of functions which are moved to main.c Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Add initialization code in pci probe for new chip and retain compatibility with old revisions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
New revision of netxen chip has 2MB PCI memory. Older chips had 128MB addressable PCI memory. To retain compatibility, this patch adds function pointers based on pci bar0 size. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Add macros for new chip revision and board configurations. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Enable multicast address filtering capabilities in the hardware. Upto 16 multicast addresses can be programmed for each physical port. Support "allmulti" mode, if enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
o Reduce access to global arrays in data path. o Remove duplicate/unused variables, unecessary alignment constraints. o Use correct pci_dev instead of fallback device for consistent allocations. o Disable ethtool set_eeprom functionality for now, it was only used for flashing firmware. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ingo Molnar authored
various drivers were using the wrong APIs: drivers/built-in.o: In function `hp_probe1': hp.c:(.init.text+0xa280): undefined reference to `NS8390_init' fixed via: cd drivers/net/; sed -i 's/NS8390_/NS8390p_/g' \ $(grep -l NS8390_ $(grep 8390p.o Makefile | cut -d' ' -f3 | \ sed 's/.o$/.c/g')) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Brice Goglin authored
Switch to ioremap_wc(). We keep the MTRR code since ioremap_wc() will use UC_MINUS when falling back to uncachable, and thus let the MTRR WC take precedence. Also rename the error path better. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Brice Goglin authored
Remove the wcfifo since it never gave any performance improvement. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Wang Chen authored
IFF_PROMISC flag shouldn't be set or cleared by drivers, because whether device be promisc mode is decided by how many upper layer callers being referenced to it. And the promisc changing feature of de4x5 ioctl is developer debug feature, we can remove it now. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
frank.blaschka@de.ibm.com authored
Adrian Bunk reports this build error: CC drivers/s390/net/qeth_l3_main.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_hard_start_xmit': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c: 2654: error: implicit declaration of function 'VLAN_TX_SKB_CB' /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c: 2654: error: invalid type argument of '->' (have 'int') make[3]: *** [drivers/s390/net/qeth_l3_main.o] Error 1 The intention of the driver appears to be to invalidate the VLAN tag. Change it to set skb->vlan_tci to zero, which has the same effect. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Laurent Pinchart authored
The mdio_port, mdio_bit, mdc_port and mdc_bit fields in the fs_mii_bb_platform_info structure are left-overs from the move to the Phy Abstraction Layer subsystem. They are not used anymore and can be safely removed. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Merge branch 'r8169-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes
-
David S. Miller authored
As reported by Alexey Dobriyan: CHECK net/ipv4/tcp_output.c net/ipv4/tcp_output.c:475:7: warning: dubious: !x & y And sparse is damn right! if (unlikely(!OPTION_TS & opts->options)) ^^^ size += TCPOLEN_SACKPERM_ALIGNED; OPTION_TS is (1 << 1), so condition will never trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Jul, 2008 22 commits
-
-
David S. Miller authored
Based upon a report by Olaf Hering. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This patch clamps the cscov setsockopt values to a maximum of 0xFFFF. Setsockopt values greater than 0xffff can cause an unwanted wrap-around. Further, IPv6 jumbograms are not supported (RFC 3838, 3.5), so that values greater than 0xffff are not even useful. Further changes: fixed a typo in the documentation. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjan van de Ven authored
As suggested by Dave: This patch adds a function to get the driver name from a struct net_device, and consequently uses this in the watchdog timeout handler to print as part of the message. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Minor nit, use size_t for allocation size and kcalloc to allocate an array. Probably makes no actual code difference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This fixes the bridge reference count problem and cleanups ipv6 FIB timer management. Don't use expires field, because it is not a proper way to test, instead use timer_pending(). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ian Schram authored
I was looking at this out of interest, but I'm in no way familiar with the code. Looks to me that the error handling code in mac80211_hwsim is awkward. Which leads to it calling ieee80211_unregister_hw even when ieee80211_register_hw failed. The function has a for loop where it generates all simulated radios. when something fails, the error handling will call mac80211_hwsim_free which frees all simulated radios who's pointer isn't zero. However the information stored is insufficient to determine whether or not the call to ieee80211_register_hw succeeded or not for a specific radio. The included patch makes init_mac80211_hwsim clean up the current simulated radio, and then calls into mac80211_hwsim_free to clean up all the radios that did succeed. This however doesn't explain why the rate control registration failed.. build tested this, but had some problems reproducing the original problem. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Introduced by a258860e (netfilter: ctnetlink: add full support for SCTP to ctnetlink): net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: incorrect type in argument 1 (different base types) net/netfilter/nf_conntrack_proto_sctp.c:483:2: expected unsigned int [unsigned] [usertype] x net/netfilter/nf_conntrack_proto_sctp.c:483:2: got restricted unsigned int const <noident> net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: incorrect type in argument 1 (different base types) net/netfilter/nf_conntrack_proto_sctp.c:487:2: expected unsigned int [unsigned] [usertype] x net/netfilter/nf_conntrack_proto_sctp.c:487:2: got restricted unsigned int const <noident> net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type net/netfilter/nf_conntrack_proto_sctp.c:532:42: warning: incorrect type in assignment (different base types) net/netfilter/nf_conntrack_proto_sctp.c:532:42: expected restricted unsigned int <noident> net/netfilter/nf_conntrack_proto_sctp.c:532:42: got unsigned int net/netfilter/nf_conntrack_proto_sctp.c:534:39: warning: incorrect type in assignment (different base types) net/netfilter/nf_conntrack_proto_sctp.c:534:39: expected restricted unsigned int <noident> net/netfilter/nf_conntrack_proto_sctp.c:534:39: got unsigned int Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
According to RFC2327, the connection information is optional in the session description since it can be specified in the media description instead. My provider does exactly that and does not provide any connection information in the session description. As a result the new kernel drops all invite responses. This patch makes it optional as documented. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Leblond authored
This patch adds some fields to NFLOG to be able to send the complete hardware header with all necessary informations. It sends to userspace: * the type of hardware link * the lenght of hardware header * the hardware header Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix netfilter xt_time's time_mt()'s use of do_div() on an s64 by using div_s64() instead. This was introduced by patch ee4411a1 ("[NETFILTER]: x_tables: add xt_time match"). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Piotr Oledzki authored
Initially netfilter has had 64bit counters for conntrack-based accounting, but it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are still required, for example for "connbytes" extension. However, 64bit counters waste a lot of memory and it was not possible to enable/disable it runtime. This patch: - reimplements accounting with respect to the extension infrastructure, - makes one global version of seq_print_acct() instead of two seq_print_counters(), - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n), - makes it possible to enable/disable it at runtime by sysctl or sysfs, - extends counters from 32bit to 64bit, - renames ip_conntrack_counter -> nf_conn_counter, - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT), - set initial accounting enable state based on CONFIG_NF_CT_ACCT - removes buggy IPCT_COUNTER_FILLING event handling. If accounting is enabled newly created connections get additional acct extend. Old connections are not changed as it is not possible to add a ct_extend area to confirmed conntrack. Accounting is performed for all connections with acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct". Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Piotr Oledzki authored
Add NLA_PUT_BE64 macro required for 64bit counters in netfilter Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Micah Dowty authored
This is a trivial patch against the hdlcdrv module that fixes its CRC calculation. The finished CRC was overwriting the first two bytes of each packet rather than being appended to the end. I've tested this with 2.6.8 and 2.6.10-rc1, but hdlcdrv hasn't changed much recently so it should work with many other kernel versions. Signed-off-by: Micah Dowty <micah@navi.cx> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit a0c80b80. After discussions with Jamal and Herbert on netdev, we should provide at least minimal prioritization at the qdisc level even in multiqueue situations. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon feedback from Eric Dumazet and Andi Kleen. Cure several deficiencies in simple_tx_hash() by using jhash + reciprocol multiply. 1) Eliminates expensive modulus operation. 2) Makes hash less attackable by using random seed. 3) Eliminates endianness hash distribution issues. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
Removed unused variable 'skb' in the dev_deactivate_queue function Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon a bug report by Alexander Beregalov and commentary from Ben Hutchings. These are totally unnecessary, in particular because this driver's ->hard_start_xmit() handler takes the same driver spinlock that the set-multicast-list handler uses. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Vorontsov authored
If the net queue has not been started, we'll get this nice oops and non-working ethernet: ------------[ cut here ]------------ Kernel BUG at c01f4648 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC836x RDK Modules linked in: NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4 REGS: cf839e40 TRAP: 0700 Not tainted (2.6.26-05254-gc7b9969) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf828c30[4] 'events/0' THREAD: cf838000 GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000 GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000 GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000 GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014 NIP [c01f4648] __netif_schedule+0x28/0x8c LR [c01c0a10] adjust_link+0x12c/0x1e4 Call Trace: [cf839ef0] [c0380f50] 0xc0380f50 (unreliable) [cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4 [cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448 [cf839f60] [c00425e8] run_workqueue+0xc8/0x168 [cf839f90] [c0042c6c] worker_thread+0x70/0xd0 [cf839fd0] [c0046954] kthread+0x48/0x84 [cf839ff0] [c0012488] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace a57d367843bd2904 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Vorontsov authored
If the net queue has not been started, we'll get this nice oops and non-working ethernet: PHY: 0:01 - Link is Up - 1000/Full ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1328! Oops: Exception in kernel mode, sig: 5 [#1] MPC837x RDB Modules linked in: NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac REGS: cf837e40 TRAP: 0700 Not tainted (2.6.26-05253-g14b395e3) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf819400[5] 'events/0' THREAD: cf836000 GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000 GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000 GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000 GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014 NIP [c02544a0] __netif_schedule+0x28/0x8c LR [c01a17d0] adjust_link+0x124/0x1cc Call Trace: [cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable) [cf837f10] [c01a17d0] adjust_link+0x124/0x1cc [cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448 [cf837f60] [c0040254] run_workqueue+0xc8/0x168 [cf837f90] [c00408d8] worker_thread+0x70/0xd0 [cf837fd0] [c0044630] kthread+0x48/0x84 [cf837ff0] [c0012610] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace 13dfd73ee42d0c30 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-