Add testmode 2 for 6003 ART. When you insmod ath6kl_sdio.ko testmode=2, ath6kl
will load ART firmware utf.bin and testscript nullTestFlow.bin. These files
should be put in the firmware folder.

kvalo: add "ath6kl:" to the title, word wrap the commit log and remove
extra line in the code
Signed-off-by: Alex Yang <xiaojuny@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Before I commited patch c1762a3f ("ath6kl: Add support for uAPSD") I
did a minor change how up variable is initialised in
ath6kl_process_uapsdq(). But I was sloppy and caused this compiler
warning:

txrx.c:88:5: warning: 'up' may be used uninitialized in this function

Revert my change to fix the warning.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

As drivers/net/wireless/ath/Makefile contains the flag to enable
endian checks there's no need to have it in ath6kl makefile anymore.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Commit c8f44aff ("net: introduce and use netdev_features_t for
device features sets") added netdev_features_t to ndo_set_features.
Change ath6kl to use the new type.

This fixes a warning:

ath6kl/main.c:1170: warning: initialization from incompatible pointer type
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Conflicts:
	drivers/net/wireless/ath/ath6kl/usb.c

ath6kl_read_fwlogs() assigns the value zero to the variable 'ret'
at the time of declaration. Later, return value of ath6kl_diag_read32()
repalces the init value. Hence removing useless zero assignment.
Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

* A new APSD power save queue is added in the station structure.
* When a station has APSD capability and goes to power save, the frame
  designated to the station will be buffered in APSD queue.
* When the host receives a frame which the firmware marked as trigger,
  host delivers the buffered frame from the APSD power save queue.
  Number of frames to deliver is decided by MAX SP length.
* When a station moves from sleep to awake state, all frames buffered
  in APSD power save queue are sent to the firmware.
* When a station is disconnected, all frames bufferes in APSD power save
  queue are dropped.
* When the host queues the first frame to the APSD queue or removes the
  last frame from the APSD queue, it is indicated to the firmware using
  WMI_AP_APSD_BUFFERED_TRAFFIC_CMD.

kvalo: fix buggy handling of sks queues, made it more obvious
the user priority when wmm is disabled, remove unneed else block and
combined some variable declarations
Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

This patch addresses a few problems with the commit:

"ath6kl: Implement support for listen interval from userspace"

* The debugfs file required for reading/writing the listen interval
  wasn't created. Fix this.

* The interface index was being hardcoded to zero. Fix this.

* Two separate parameters, "listen_interval_time and listen_interval_beacons"
  were being used. This fails to work as expected because the FW assigns
  higher precedence to "listen_interval_beacons" and "listen_interval_time"
  ends up being never used at all.

  To handle this, fix the host driver to exclusively use listen interval
  based on units of beacon intervals.

To set the listen interval, a user would now do something like this:

echo "10" > /sys/kernel/debug/ieee80211/*/ath6kl/listen_interval

kvalo: fix two checkpatch warnings
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

This prevents 'comp_pktq' from being used in an
incorrect manner.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

'params' is already used earlier and there is no point
in checking for a NULL condition again.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

sdio_release_host() would be called twice if sdio_set_block_size()
fails for some reason, which would result in the following warning.

WARNING: at /home/sujith/dev/wireless-testing/drivers/mmc/core/core.c:828 mmc_release_host+0x42/0x50 [mmc_core]()

Call Trace:
[<ffffffff81064fdf>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8106503a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa03beb42>] mmc_release_host+0x42/0x50 [mmc_core]
[<ffffffffa03c917e>] sdio_release_host+0x1e/0x30 [mmc_core]
[<ffffffffa053fac7>] ath6kl_sdio_config+0xc7/0x110 [ath6kl_sdio]
[<ffffffffa053fd2c>] ath6kl_sdio_probe+0x21c/0x320 [ath6kl_sdio]
[<ffffffffa03beb2a>] ? mmc_release_host+0x2a/0x50 [mmc_core]
[<ffffffffa03c7d2a>] sdio_bus_probe+0xfa/0x130 [mmc_core]
[<ffffffff813015ae>] driver_probe_device+0x7e/0x1b0
[<ffffffff8130178b>] __driver_attach+0xab/0xb0
[<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
[<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
[<ffffffff81300504>] bus_for_each_dev+0x64/0xa0
[<ffffffff8130123e>] driver_attach+0x1e/0x20
[<ffffffff81300e80>] bus_add_driver+0x1b0/0x280
[<ffffffffa0065000>] ? 0xffffffffa0064fff
[<ffffffff81301d06>] driver_register+0x76/0x140
[<ffffffffa0065000>] ? 0xffffffffa0064fff
[<ffffffffa03c7b71>] sdio_register_driver+0x21/0x30 [mmc_core]
[<ffffffffa0065012>] ath6kl_sdio_init+0x12/0x35 [ath6kl_sdio]
[<ffffffff81002042>] do_one_initcall+0x42/0x180
[<ffffffff810b025f>] sys_init_module+0x8f/0x200
[<ffffffff81425ac2>] system_call_fastpath+0x16/0x1b
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Commit 5b7c8406 ('ipv4: correct IGMP
behavior on v3 query during v2-compatibility mode') added yet another
case for query parsing, which can result in max_delay = 0.  Substitute
a value of 1, as in the usual v3 case.
Reported-by: Simon McVittie <smcv@debian.org>
References: http://bugs.debian.org/654876Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

More drivers where net_device_ops should be const.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool_ops table of function pointers should be const.
Fix all the usb network drivers.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

> net/core/sock.c: In function 'sk_update_clone':
> net/core/sock.c:1278:3: error: implicit declaration of function 'sock_update_memcg'
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_uc_sync() and dev_mc_sync() are acquiring netif_addr_lock for
destination device of synchronization. Since netif_addr_lock is
already held at the time for source device, this triggers lockdep
deadlock warning.

There's no way this deadlock can happen so use spin_lock_nested() to
silence the warning.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Currently this race is handled but in a messy way an atomic
variable is being checked in a loop which sleeps upto ms
in every iteration. Remove this logic and use a mutex
to make sure irq is not disabled when irq handling is in
progress.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Otherwise if (ielen <= ATH6KL_MAX_IE) is dead code. It looks safe to
change the type of ielen from u8 to size_t instead of removing this
if check, this ielen can have the length of more than one ies in future.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

In ath6kl_reset_device(), since control can never reach switch..case
when the target_type is neither TARGET_TYPE_AR6003 nor TARGET_TYPE_AR6004,
remove the default option of switch statement.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

There are maximum of seven multicast filter are supported
by hw. When the requested number of filters exceeds the
maximum supported one, multicast filtering is completely
disabled, the requested filters will be configured in
firmware and the only multicast frames that host is interested
in will be passed to host for further processing otherwise.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>

This will be used to disable/enable multicast receive.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>

so move it there.  Fixes build errors when CONFIG_INET is not defined:

In file included from include/linux/tcp.h:211:0,
                 from include/linux/ipv6.h:221,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:26,
                 from include/linux/nfs_fs.h:50,
                 from init/do_mounts.c:20:
include/net/sock.h: In function 'sk_update_clone':
include/net/sock.h:1109:3: error: implicit declaration of function 'sock_update_memcg' [-Werror=implicit-function-declaration]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver uses __napi_complete and napi_gro_receive. Without it, the
driver hits the BUG_ON(n->gro_list) assertion hard in __napi_complete.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Marin Glibic <zhilla2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 88271660 "pktgen: fix multiple queue warning" we added special
logic to handle the case where ntxq is zero.  It's not clear to me that
ntxq can actually be zero.  But if it were then we would set
->queue_map_min and ->queue_map_max to USHRT_MAX when probably we want
to set them to zero?
Signed-off-by: David S. Miller <davem@davemloft.net>

The energy detect enable/disable code in the driver uses some
register defines in this header unconditionally, so guarding
the smscphy.h header include with CONFIG_SMSC_PHY leads to
build failures in some configurations.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

At this point if skb->len happens to be 2, the subsequant skb_pull(skb, 4)
call won't work and the skb->len won't be decreased and won't ever reach 0,
resulting in an infinite loop.

With an ASIX 88772 under heavy load, without this patch, rx_fixup() reaches
an infinite loop in less than a minute. With this patch applied,
no infinite loop even after hours of heavy load.
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4e16d6eb (r6040: define more MCR0
register bits) added #define values for MCR0 register bits and converted
uses of hardcoded magic values to uses of these defines.

However, one of the conversions looks suspicious:

 #define MCR0		0x00	/* Control register 0 */
+#define  MCR0_RCVEN	0x0002	/* Receive enable */
+#define  MCR0_XMTEN	0x1000	/* Transmission enable */

 	/* Init RDC private data */
-	lp->mcr0 = 0x1002;
+	lp->mcr0 = MCR0_XMTEN | MCR0;

I believe what was meant here was MCR0_XMTEN | MCR0_RCVEN, which makes
sense and matches the original values.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sockets can also be created through sock_clone. Because it copies
all data in the sock structure, it also copies the memcg-related pointer,
and all should be fine. However, since we now use reference counts in
socket creation, we are left with some sockets that have no reference
counts. It matters when we destroy them, since it leads to a mismatch.
Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: David S. Miller <davem@davemloft.net>
CC: Greg Thelen <gthelen@google.com>
CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: Laurent Chavey <chavey@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.

* 'for-linus' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (207 commits)
  ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.h
  ARM: 7269/1: mach-sa1100: fix sched_clock breakage
  ARM: 7198/1: arm/imx6: add restart support for imx6q
  ARM: restart: remove the now empty arch_reset()
  ARM: restart: remove comments about adding code to arch_reset()
  ARM: restart: lpc32xx & u300: remove unnecessary printk
  ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook
  ARM: restart: w90x900: use new restart hook
  ARM: restart: Versatile Express: use new restart hook
  ARM: restart: versatile: use new restart hook
  ARM: restart: u300: use new restart hook
  ARM: restart: tegra: use new restart hook
  ARM: restart: spear: use new restart hook
  ARM: restart: shark: use new restart hook
  ARM: restart: sa1100: use new restart hook
  ARM: 7252/1: restart: S5PV210: use new restart hook
  ARM: 7251/1: restart: S5PC100: use new restart hook
  ARM: 7250/1: restart: S5P64X0: use new restart hook
  ARM: 7266/1: restart: S3C64XX: use new restart hook
  ARM: 7265/1: restart: S3C24XX: use new restart hook
  ...

Fix up trivial conflict in arch/arm/mm/init.c due to removal of
memblock_init() clashing with the movement of the sorting of the meminfo
array.

Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h

* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: gracefully handle NULL pstore_info functions
  pstore: pass reason to backend write callback

* 'misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: pcibr: Use kmemdup rather than duplicating its implementation
  ia64: sn: Use kmemdup rather than duplicating its implementation
  ia64: tioca: Use kmemdup rather than duplicating its implementation
  [IA64] Merge overlapping reserved regions at boot

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (56 commits)
  m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled
  m68k/Kconfig: Separate classic m68k and coldfire early
  m68k: add ColdFire with MMU enabled support to the m68k mem init code
  m68k: do not use m68k startup or interrupt code for ColdFire CPUs
  m68k: add ColdFire FPU support for the V4e ColdFire CPUs
  m68k: adjustments to stack frame for ColdFire with MMU enabled
  m68k: use non-MMU linker script for ColdFire MMU builds
  m68k: ColdFire with MMU enabled uses same clocking code as non-MMU
  m68k: add code to setup a ColdFire 54xx platform when MMU enabled
  m68k: use non-MMU entry.S code when compiling for ColdFire CPU
  m68k: create ColdFire MMU pgalloc code
  m68k: compile appropriate mm arch files for ColdFire MMU support
  m68k: ColdFire V4e MMU paging init code and miss handler
  m68k: use ColdFire MMU read/write bit flags when ioremapping
  m68k: modify cache push and clear code for ColdFire with MMU enable
  m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path
  m68k: ColdFire V4e MMU context support code
  m68k: MMU enabled ColdFire needs 8k ELF alignment
  m68k: set ColdFire MMU page size
  m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.