- 01 Dec, 2022 5 commits
-
-
Sean Christopherson authored
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported CPUID info before enabling XSAVE-managed features that are off-by-default and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported CPUID before all XSAVE features are enabled can result in false negatives due to testing features that were cached before they were enabled. Signed-off-by:
Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20221128225735.3291648-4-seanjc@google.com
-
Sean Christopherson authored
Move __vm_xsave_require_permission() below the CPUID helpers so that a future change can reference the cached result of KVM_GET_SUPPORTED_CPUID while keeping the definition of the variable close to its intended user, kvm_get_supported_cpuid(). No functional change intended. Signed-off-by:
-
Lei Wang authored
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to enable off-by-default XSAVE-managed features and into the one test that currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results in the test caching stale values, e.g. subsequent checks on AMX_TILE will get false negatives. Although off-by-default features are nonsensical without XFD, checking for XFD virtualization prior to enabling such features isn't strictly required. Signed-off-by:
Lei Wang <lei4.wang@intel.com> Fixes: 7fbb653e ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD") Link: https://lore.kernel.org/r/20221125023839.315207-1-lei4.wang@intel.com [sean: add Fixes, reword changelog] Signed-off-by:
-
Sean Christopherson authored
Restore the assert (on x86-64) that <10% of pages are still idle when NOT running as a nested VM in the access tracking test. The original assert was converted to a "warning" to avoid false failures when running the test in a VM, but the non-nested case does not suffer from the same "infinite TLB size" issue. Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly required to enumerate the "feature" in CPUID, but practically speaking anyone that is running KVM selftests in VMs is going to be using a VMM and hypervisor that sets the HYPERVISOR flag. Cc: David Matlack <dmatlack@google.com> Reviewed-by:
Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Warn if the number of idle pages is greater than or equal to 10% of the total number of pages, not if the percentage of idle pages is less than 10%. The original code asserted that less than 10% of pages were still idle, but the check got inverted when the assert was converted to a warning. Opportunistically clean up the warning; selftests are 64-bit only, there is no need to use "%PRIu64" instead of "%lu". Fixes: 6336a810 ("KVM: selftests: replace assertion with warning in access_tracking_perf_test") Reviewed-by:
-
- 30 Nov, 2022 6 commits
-
-
Paolo Bonzini authored
If a triple fault was fixed by kvm_x86_ops.nested_ops->triple_fault (by turning it into a vmexit), there is no need to leave vcpu_enter_guest(). Any vcpu->requests will be caught later before the actual vmentry, and in fact vcpu_enter_guest() was not initializing the "r" variable. Depending on the compiler's whims, this could cause the x86_64/triple_fault_event_test test to fail. Cc: Maxim Levitsky <mlevitsk@redhat.com> Fixes: 92e7d5c8 ("KVM: x86: allow L1 to not intercept triple fault") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Michal Luczaj authored
Remove the unused @kvm argument from gpc_unmap_khva(). Signed-off-by:
Michal Luczaj <mhal@rbox.co> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Michal Luczaj authored
Formalize "gpc" as the acronym and use it in function names. No functional change intended. Suggested-by:
-
David Woodhouse authored
Torture test the cases where the runstate crosses a page boundary, and and especially the case where it's configured in 32-bit mode and doesn't, but then switching to 64-bit mode makes it go onto the second page. To simplify this, make the KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST ioctl also update the guest runstate area. It already did so if the actual runstate changed, as a side-effect of kvm_xen_update_runstate(). So doing it in the plain adjustment case is making it more consistent, as well as giving us a nice way to trigger the update without actually running the vCPU again and changing the values. Signed-off-by:
Paul Durrant <paul@xen.org> Signed-off-by:
-
David Woodhouse authored
Closer inspection of the Xen code shows that we aren't supposed to be using the XEN_RUNSTATE_UPDATE flag unconditionally. It should be explicitly enabled by guests through the HYPERVISOR_vm_assist hypercall. If we randomly set the top bit of ->state_entry_time for a guest that hasn't asked for it and doesn't expect it, that could make the runtimes fail to add up and confuse the guest. Without the flag it's perfectly safe for a vCPU to read its own vcpu_runstate_info; just not for one vCPU to read *another's*. I briefly pondered adding a word for the whole set of VMASST_TYPE_* flags but the only one we care about for HVM guests is this, so it seemed a bit pointless. Signed-off-by:
-
David Woodhouse authored
The guest runstate area can be arbitrarily byte-aligned. In fact, even when a sane 32-bit guest aligns the overall structure nicely, the 64-bit fields in the structure end up being unaligned due to the fact that the 32-bit ABI only aligns them to 32 bits. So setting the ->state_entry_time field to something|XEN_RUNSTATE_UPDATE is buggy, because if it's unaligned then we can't update the whole field atomically; the low bytes might be observable before the _UPDATE bit is. Xen actually updates the *byte* containing that top bit, on its own. KVM should do the same. In addition, we cannot assume that the runstate area fits within a single page. One option might be to make the gfn_to_pfn cache cope with regions that cross a page — but getting a contiguous virtual kernel mapping of a discontiguous set of IOMEM pages is a distinctly non-trivial exercise, and it seems this is the *only* current use case for the GPC which would benefit from it. An earlier version of the runstate code did use a gfn_to_hva cache for this purpose, but it still had the single-page restriction because it used the uhva directly — because it needs to be able to do so atomically when the vCPU is being scheduled out, so it used pagefault_disable() around the accesses and didn't just use kvm_write_guest_cached() which has a fallback path. So... use a pair of GPCs for the first and potential second page covering the runstate area. We can get away with locking both at once because nothing else takes more than one GPC lock at a time so we can invent a trivial ordering rule. The common case where it's all in the same page is kept as a fast path, but in both cases, the actual guest structure (compat or not) is built up from the fields in @vx, following preset pointers to the state and times fields. The only difference is whether those pointers point to the kernel stack (in the split case) or to guest memory directly via the GPC. The fast path is also fixed to use a byte access for the XEN_RUNSTATE_UPDATE bit, then the only real difference is the dual memcpy. Finally, Xen also does write the runstate area immediately when it's configured. Flip the kvm_xen_update_runstate() and …_guest() functions and call the latter directly when the runstate area is set. This means that other ioctls which modify the runstate also write it immediately to the guest when they do so, which is also intended. Update the xen_shinfo_test to exercise the pathological case where the XEN_RUNSTATE_UPDATE flag in the top byte of the state_entry_time is actually in a different page to the rest of the 64-bit word. Signed-off-by:
-
- 28 Nov, 2022 12 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function
-
Jiaxi Chen authored
Latest Intel platform Granite Rapids has introduced a new instruction - PREFETCHIT0/1, which moves code to memory (cache) closer to the processor depending on specific hints. The bit definition: CPUID.(EAX=7,ECX=1):EDX[bit 14] PREFETCHIT0/1 is on a KVM-only subleaf. Plus an x86_FEATURE definition for this feature bit to direct it to the KVM entry. Advertise PREFETCHIT0/1 to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
Jiaxi Chen <jiaxi.chen@linux.intel.com> Message-Id: <20221125125845.1182922-9-jiaxi.chen@linux.intel.com> Signed-off-by:
-
Jiaxi Chen authored
AVX-NE-CONVERT is a new set of instructions which can convert low precision floating point like BF16/FP16 to high precision floating point FP32, and can also convert FP32 elements to BF16. This instruction allows the platform to have improved AI capabilities and better compatibility. The bit definition: CPUID.(EAX=7,ECX=1):EDX[bit 5] AVX-NE-CONVERT is on a KVM-only subleaf. Plus an x86_FEATURE definition for this feature bit to direct it to the KVM entry. Advertise AVX-NE-CONVERT to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
-
Jiaxi Chen authored
AVX-VNNI-INT8 is a new set of instructions in the latest Intel platform Sierra Forest, aims for the platform to have superior AI capabilities. This instruction multiplies the individual bytes of two unsigned or unsigned source operands, then adds and accumulates the results into the destination dword element size operand. The bit definition: CPUID.(EAX=7,ECX=1):EDX[bit 4] AVX-VNNI-INT8 is on a new and sparse CPUID leaf and all bits on this leaf have no truly kernel use case for now. Given that and to save space for kernel feature bits, move this new leaf to KVM-only subleaf and plus an x86_FEATURE definition for AVX-VNNI-INT8 to direct it to the KVM entry. Advertise AVX-VNNI-INT8 to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
-
Jiaxi Chen authored
AVX-IFMA is a new instruction in the latest Intel platform Sierra Forest. This instruction packed multiplies unsigned 52-bit integers and adds the low/high 52-bit products to Qword Accumulators. The bit definition: CPUID.(EAX=7,ECX=1):EAX[bit 23] AVX-IFMA is on an expected-dense CPUID leaf and some other bits on this leaf have kernel usages. Given that, define this feature bit like X86_FEATURE_<name> in kernel. Considering AVX-IFMA itself has no truly kernel usages and /proc/cpuinfo has too much unreadable flags, hide this one in /proc/cpuinfo. Advertise AVX-IFMA to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
Borislav Petkov <bp@suse.de> Message-Id: <20221125125845.1182922-6-jiaxi.chen@linux.intel.com> Signed-off-by:
-
Chang S. Bae authored
Latest Intel platform Granite Rapids has introduced a new instruction - AMX-FP16, which performs dot-products of two FP16 tiles and accumulates the results into a packed single precision tile. AMX-FP16 adds FP16 capability and also allows a FP16 GPU trained model to run faster without loss of accuracy or added SW overhead. The bit definition: CPUID.(EAX=7,ECX=1):EAX[bit 21] AMX-FP16 is on an expected-dense CPUID leaf and some other bits on this leaf have kernel usages. Given that, define this feature bit like X86_FEATURE_<name> in kernel. Considering AMX-FP16 itself has no truly kernel usages and /proc/cpuinfo has too much unreadable flags, hide this one in /proc/cpuinfo. Advertise AMX-FP16 to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
-
Jiaxi Chen authored
CMPccXADD is a new set of instructions in the latest Intel platform Sierra Forest. This new instruction set includes a semaphore operation that can compare and add the operands if condition is met, which can improve database performance. The bit definition: CPUID.(EAX=7,ECX=1):EAX[bit 7] CMPccXADD is on an expected-dense CPUID leaf and some other bits on this leaf have kernel usages. Given that, define this feature bit like X86_FEATURE_<name> in kernel. Considering CMPccXADD itself has no truly kernel usages and /proc/cpuinfo has too much unreadable flags, hide this one in /proc/cpuinfo. Advertise CMPCCXADD to KVM userspace. This is safe because there are no new VMX controls or additional host enabling required for guests to use this feature. Signed-off-by:
-
Sean Christopherson authored
Rename kvm_cpu_cap_init_scattered() to kvm_cpu_cap_init_kvm_defined() in anticipation of adding KVM-only CPUID leafs that aren't recognized by the kernel and thus not scattered, i.e. for leafs that are 100% KVM-defined. Adjust/add comments to kvm_only_cpuid_leafs and KVM_X86_FEATURE to document how to create new kvm_only_cpuid_leafs entries for scattered features as well as features that are entirely unknown to the kernel. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a compile-time assert in the SF() macro to detect improper usage, i.e. to detect passing in an X86_FEATURE_* flag that isn't actually scattered by the kernel. Upcoming feature flags will be 100% KVM-only and will have X86_FEATURE_* macros that point at a kvm_only_cpuid_leafs word, not a kernel-defined word. Using SF() and thus boot_cpu_has() for such feature flags would access memory beyond x86_capability[NCAPINTS] and at best incorrectly hide a feature, and at worst leak kernel state to userspace. Signed-off-by:
-
David Woodhouse authored
Adding Paul as co-maintainer of Xen support to help ensure that things don't fall through the cracks when I spend three months at a time travelling... Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
Paolo Bonzini authored
Architecture code might want to use it even if CONFIG_HAVE_KVM_IRQ_ROUTING is false; for example PPC XICS has KVM_IRQ_LINE and wants to use kvm_arch_irqchip_in_kernel from there, but it does not have KVM_SET_GSI_ROUTING so the prototype was not provided. Fixes: d663b8a2 ("KVM: replace direct irq.h inclusion") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 24 Nov, 2022 1 commit
-
-
Paolo Bonzini authored
This brings in a few important fixes for Xen emulation. While nobody should be enabling it, the bug effectively allows userspace to read arbitrary memory. Signed-off-by:
-
- 23 Nov, 2022 11 commits
-
-
David Woodhouse authored
In the case where a GPC is refreshed to a different location within the same page, we didn't bother to update it. Mostly we don't need to, but since the ->khva field also includes the offset within the page, that does have to be updated. Fixes: 3ba2c95e ("KVM: Do not incorporate page offset into gfn=>pfn cache user address") Signed-off-by:
-
David Woodhouse authored
There are almost no hypercalls which are valid from CPL > 0, and definitely none which are handled by the kernel. Fixes: 2fd6df2f ("KVM: x86/xen: intercept EVTCHNOP_send from guests") Reported-by:
-
David Woodhouse authored
We shouldn't allow guests to poll on arbitrary port numbers off the end of the event channel table. Fixes: 1a65105a ("KVM: x86/xen: handle PV spinlocks slowpath") [dwmw2: my bug though; the original version did check the validity as a side-effect of an idr_find() which I ripped out in refactoring.] Reported-by:
-
Heiko Carstens authored
clang warns about an unused function: arch/s390/kvm/interrupt.c:317:20: error: unused function 'gisa_clear_ipm_gisc' [-Werror,-Wunused-function] static inline void gisa_clear_ipm_gisc(struct kvm_s390_gisa *gisa, u32 gisc) Remove gisa_clear_ipm_gisc(), since it is unused and get rid of this warning. Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20221118151133.2974602-1-hca@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by:
Janosch Frank <frankja@linux.ibm.com>
-
Nico Boehr authored
Fix virtual vs physical address confusion (which currently are the same) for the GISA when enabling the IRQ. Signed-off-by:
Nico Boehr <nrb@linux.ibm.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221118100429.70453-1-nrb@linux.ibm.com Message-Id: <20221118100429.70453-1-nrb@linux.ibm.com> Signed-off-by:
-
Claudio Imbrenda authored
Add the module parameter "async_destroy", to allow the asynchronous destroy mechanism to be switched off. This might be useful for debugging purposes. The parameter is enabled by default since the feature is opt-in anyway. Signed-off-by:
Steffen Eiden <seiden@linux.ibm.com> Reviewed-by:
-
Claudio Imbrenda authored
Add support for the Destroy Secure Configuration Fast Ultravisor call, and take advantage of it for asynchronous destroy. When supported, the protected guest is destroyed immediately using the new UVC, leaving only the memory to be cleaned up asynchronously. Signed-off-by:
-
Claudio Imbrenda authored
If the appropriate UV feature bit is set, there is no need to perform an export before import. The misc feature indicates, among other things, that importing a shared page from a different protected VM will automatically also transfer its ownership. Signed-off-by:
-
Claudio Imbrenda authored
Add KVM_CAP_S390_PROTECTED_ASYNC_DISABLE to signal that the KVM_PV_ASYNC_DISABLE and KVM_PV_ASYNC_DISABLE_PREPARE commands for the KVM_S390_PV_COMMAND ioctl are available. Signed-off-by:
-
Claudio Imbrenda authored
Add documentation for the new commands added to the KVM_S390_PV_COMMAND ioctl. Signed-off-by:
-
Claudio Imbrenda authored
Until now, destroying a protected guest was an entirely synchronous operation that could potentially take a very long time, depending on the size of the guest, due to the time needed to clean up the address space from protected pages. This patch implements an asynchronous destroy mechanism, that allows a protected guest to reboot significantly faster than previously. This is achieved by clearing the pages of the old guest in background. In case of reboot, the new guest will be able to run in the same address space almost immediately. The old protected guest is then only destroyed when all of its memory has been destroyed or otherwise made non protected. Two new PV commands are added for the KVM_S390_PV_COMMAND ioctl: KVM_PV_ASYNC_CLEANUP_PREPARE: set aside the current protected VM for later asynchronous teardown. The current KVM VM will then continue immediately as non-protected. If a protected VM had already been set aside for asynchronous teardown, but without starting the teardown process, this call will fail. There can be at most one VM set aside at any time. Once it is set aside, the protected VM only exists in the context of the Ultravisor, it is not associated with the KVM VM anymore. Its protected CPUs have already been destroyed, but not its memory. This command can be issued again immediately after starting KVM_PV_ASYNC_CLEANUP_PERFORM, without having to wait for completion. KVM_PV_ASYNC_CLEANUP_PERFORM: tears down the protected VM previously set aside using KVM_PV_ASYNC_CLEANUP_PREPARE. Ideally the KVM_PV_ASYNC_CLEANUP_PERFORM PV command should be issued by userspace from a separate thread. If a fatal signal is received (or if the process terminates naturally), the command will terminate immediately without completing. All protected VMs whose teardown was interrupted will be put in the need_cleanup list. The rest of the normal KVM teardown process will take care of properly cleaning up all remaining protected VMs, including the ones on the need_cleanup list. Signed-off-by:
-
- 21 Nov, 2022 5 commits
-
-
Vitaly Kuznetsov authored
Conform to the rest of Hyper-V emulation selftests which have 'hyperv' prefix. Get rid of '_test' suffix as well as the purpose of this code is fairly obvious. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition assist page. Signed-off-by:
-
Vitaly Kuznetsov authored
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition assist page. Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V MSR-Bitmap tests do RDMSR from L2 to exit to L1. While 'evmcs_test' correctly clobbers all GPRs (which are not preserved), 'hyperv_svm_test' does not. Introduce a more generic rdmsr_from_l2() to avoid code duplication and remove hardcoding of MSRs. Do not put it in common code because it is really just a selftests bug rather than a processor feature that requires it. Signed-off-by:
-
Vitaly Kuznetsov authored
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush it becomes (theoretically) possible that L0 will take responsibility for handling the call and no L1 exit will happen. Prevent this by stuffing RAX (KVM ABI) and RCX (Hyper-V ABI) with 'safe' values. While on it, convert vmmcall() to 'static inline', make it setup stack frame and move to include/x86_64/svm_util.h. Signed-off-by:
-
