Pull bcachefs fixes from Kent Overstreet:
 "Simple stuff:

   - NULL ptr/err ptr deref fixes

   - fix for getting wedged on shutdown after journal error

   - fix missing recalc_capacity() call, capacity now changes correctly
     after a device goes read only

     however: our capacity calculation still doesn't take into account
     when we have mixed ro/rw devices and the ro devices have data on
     them, that's going to be a more involved fix to separate accounting
     for "capacity used on ro devices" and "capacity used on rw devices"

   - boring syzbot stuff

  Slightly more involved:

   - discard, invalidate workers are now per device

     this has the effect of simplifying how we take device refs in these
     paths, and the device ref cleanup fixes a longstanding race between
     the device removal path and the discard path

   - fixes for how the debugfs code takes refs on btree_trans objects we
     have debugfs code that prints in use btree_trans objects.

     It uses closure_get() on trans->ref, which is mainly for the cycle
     detector, but the debugfs code was using it on a closure that may
     have hit 0, which is not allowed; for performance reasons we cannot
     avoid having not-in-use transactions on the global list.

     Introduce some new primitives to fix this and make the
     synchronization here a whole lot saner"

* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix kmalloc bug in __snapshot_t_mut
  bcachefs: Discard, invalidate workers are now per device
  bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
  bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
  bcachefs: Add missing bch2_journal_do_writes() call
  bcachefs: Fix null ptr deref in journal_pins_to_text()
  bcachefs: Add missing recalc_capacity() call
  bcachefs: Fix btree_trans list ordering
  bcachefs: Fix race between trans_put() and btree_transactions_read()
  closures: closure_get_not_zero(), closure_return_sync()
  bcachefs: Make btree_deadlock_to_text() clearer
  bcachefs: fix seqmutex_relock()
  bcachefs: Fix freeing of error pointers

Pull block fixes from Jens Axboe:
 "NVMe fixes via Keith:

   - Fabrics fixes (Hannes)

   - Missing module description (Jeff)

   - Clang warning fix (Nathan)"

* tag 'block-6.10-20240628' of git://git.kernel.dk/linux:
  nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
  nvmet: make 'tsas' attribute idempotent for RDMA
  nvme: fixup comment for nvme RDMA Provider Type
  nvme-apple: add missing MODULE_DESCRIPTION()
  nvmet: do not return 'reserved' for empty TSAS values
  nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.

Pull iommu fixes from Joerg Roedel:

 - Two cache flushing fixes for Intel and AMD drivers

 - AMD guest translation enabling fix

 - Update IOMMU tree location in MAINTAINERS file

* tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  MAINTAINERS: Update IOMMU tree location
  iommu/amd: Fix GT feature enablement again
  iommu/vt-d: Fix missed device TLB cache tag
  iommu/amd: Invalidate cache before removing device from domain list

Pull gpio fixes from Bartosz Golaszewski:
 "An assortment of driver fixes and two commits addressing a bad
  behavior of the GPIO uAPI when reconfiguring requested lines.

   - fix a race condition in i2c transfers by adding a missing i2c lock
     section in gpio-pca953x

   - validate the number of obtained interrupts in gpio-davinci

   - add missing raw_spinlock_init() in gpio-graniterapids

   - fix bad character device behavior: disallow GPIO line
     reconfiguration without set direction both in v1 and v2 uAPI"

* tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: cdev: Ignore reconfiguration without direction
  gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
  gpio: graniterapids: Add missing raw_spinlock_init()
  gpio: davinci: Validate the obtained number of IRQs
  gpio: pca953x: fix pca953x_irq_bus_sync_unlock race

Pull arm64 fixes from Will Deacon:
 "A pair of small arm64 fixes for -rc6.

  One is a fix for the recently merged uffd-wp support (which was
  triggering a spurious warning) and the other is a fix to the clearing
  of the initial idmap pgd in some configurations

  Summary:

   - Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
     pte

   - Fix clearing of the idmap pgd when using large addressing modes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Clear the initial ID map correctly before remapping
  arm64: mm: Permit PTE SW bits to change in live mappings

Pull turbostat fixes from Len Brown:
 "Fix three recent minor turbostat regressions"

* tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: Add local build_bug.h header for snapshot target
  tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
  tools/power turbostat: option '-n' is ambiguous

Update the maintainers entries to the new location of the
IOMMU tree.
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Fixes compilation errors for Makefile snapshot target described in:
commit 231ce08b ("tools/power turbostat: Add "snapshot:" Makefile target")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Commit 78464d76 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.

Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.

Fixes: 78464d76 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

In some cases specifying the '-n' command line argument will cause
turbostat to fail.  For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail.  This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring.  This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.

tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'

Fixes: a0e86c90 ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Pyll crypto fix from Herbert Xu:
 "Fix a build failure in qat"

* tag 'v6.10-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - fix linking errors when PCI_IOV is disabled

Pull drm fixes from Dave Airlie:
 "Regular fixes, mostly amdgpu with some minor fixes in other places,
  along with a fix for a very narrow UAF race in the pid handover code.

  core:
   - fix refcounting race on pid handover

  fbdev:
   - Fix fb_info when vmalloc is used, regression from
     CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.

  amdgpu:
   - SMU 14.x fix
   - vram info parsing fix
   - mode1 reset fix
   - LTTPR fix
   - Virtual display fix
   - Avoid spurious error in PSP init

  i915:
   - Fix potential UAF due to race on fence register revocation

  nouveau
   - nouveau tv mode fixes

  panel:
   - Add KOE TX26D202VM0BWA timings"

* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
  drm/drm_file: Fix pid refcounting race
  drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
  drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
  drm/amdgpu: Don't show false warning for reg list
  drm/amdgpu: avoid using null object of framebuffer
  drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
  drm/amdgpu: Fix pci state save during mode-1 reset
  drm/amdgpu/atomfirmware: fix parsing of vram_info
  drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
  drm/i915/gt: Fix potential UAF by revoke of fence registers
  drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
  drm/fbdev-dma: Only set smem_start is enable per module option

<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>

filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:

process A               process B
=========               =========
                        begin drm_file_update_pid
                        mutex_lock(&dev->filelist_mutex)
                        rcu_replace_pointer(filp->pid, <pid B>, 1)
                        mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>)   *** pid B reaches refcount 0 and is freed here ***
                        get_pid(<pid B>)   *** UAF ***
                        synchronize_rcu()
                        put_pid(<pid A>)

As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.

This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().

Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.

This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.

Fixes: 1c7a387f ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2024-06-27' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

drm/i915 fixes for v6.10-rc6:
- Fix potential UAF due to race on fence register revocation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ikxudcpd.fsf@intel.com

Pull power management fix from Rafael Wysocki:
 "Modify the intel_pstate driver to use HWP to initialize the ITMT
  scheduler extension if ACPI CPPC cannot be used for that, which is the
  case on some hybrid x86 systems (Rafael Wysocki)"

* tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing

Pull thermal control fix from Rafael Wysocki:
 "Replace an earlier fix for a recent regression in the Step-Wise
  thermal governor that was not effective in all of the relevant cases
  (Rafael Wysocki)"

* tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_step_wise: Go straight to instance->lower when mitigation is over

Pull io_uring fixes from Jens Axboe:
 "Removal of a struct member that's unused since the 6.10 merge window,
  and a fix for a regression in SQPOLL wakeups, bringing it back to how
  it worked before the SQPOLL local task_work"

* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
  io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
  io_uring: remove dead struct io_submit_state member

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.10

 - Fabrics fixes (Hannes)
 - Missing module description (Jeff)
 - Clang warning fix (Nathan)"

* tag 'nvme-6.10-2024-06-27' of git://git.infradead.org/nvme:
  nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
  nvmet: make 'tsas' attribute idempotent for RDMA
  nvme: fixup comment for nvme RDMA Provider Type
  nvme-apple: add missing MODULE_DESCRIPTION()
  nvmet: do not return 'reserved' for empty TSAS values
  nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.

Pull s390 updates from Alexander Gordeev:

 - Add missing virt_to_phys() conversion for directed interrupt bit
   vectors

 - Fix broken configuration change notifications for virtio-ccw

 - Fix sclp_init() cleanup path on failure and as result - fix a list
   double add warning

 - Fix unconditional adjusting of GOT entries containing undefined weak
   symbols that resolve to zero

* tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/boot: Do not adjust GOT entries for undef weak sym
  s390/sclp: Fix sclp_init() cleanup on failure
  s390/virtio_ccw: Fix config change notifications
  s390/pci: Add missing virt_to_phys() for directed DIBV

Merge tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "These are some bugfixes for system call ABI issues I found while
  working on a cleanup series. None of these are urgent since these bugs
  have gone unnoticed for many years, but I think we probably want to
  backport them all to stable kernels, so it makes sense to have the
  fixes included as early as possible.

  One more fix addresses a compile-time warning in kallsyms that was
  uncovered by a patch I did to enable additional warnings in 6.10. I
  had mistakenly thought that this fix was already merged through the
  module tree, but as Geert pointed out it was still missing"

* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  kallsyms: rework symbol lookup return codes
  linux/syscalls.h: add missing __user annotations
  syscalls: mmap(): use unsigned offset type consistently
  s390: remove native mmap2() syscall
  hexagon: fix fadvise64_64 calling conventions
  csky, hexagon: fix broken sys_sync_file_range
  sh: rework sync_file_range ABI
  powerpc: restore some missing spu syscalls
  parisc: use generic sys_fanotify_mark implementation
  parisc: use correct compat recv/recvfrom syscalls
  sparc: fix compat recv/recvfrom syscalls
  sparc: fix old compat_sys_select()
  syscalls: fix compat_sys_io_pgetevents_time64 usage
  ftruncate: pass a signed offset

Pull btrfs fixes from David Sterba:

 - fix quota root leak after quota disable failure

 - fix condition when checking if a zone can be added as free

 - allocate inode in NOFS context during logging or tree-log replay

 - handle raid-stripe-tree lookup correctly during scrub

* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: fix quota root leak after quota disable failure
  btrfs: scrub: handle RST lookup error correctly
  btrfs: zoned: fix initial free space detection
  btrfs: use NOFS context when getting inodes during logging and log replay

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, bpf and netfilter.

  There are a bunch of regressions addressed here, but hopefully nothing
  spectacular. We are still waiting the driver fix from Intel, mentioned
  by Jakub in the previous networking pull.

  Current release - regressions:

   - core: add softirq safety to netdev_rename_lock

   - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
     TFO

   - batman-adv: fix RCU race at module unload time

  Previous releases - regressions:

   - openvswitch: get related ct labels from its master if it is not
     confirmed

   - eth: bonding: fix incorrect software timestamping report

   - eth: mlxsw: fix memory corruptions on spectrum-4 systems

   - eth: ionic: use dev_consume_skb_any outside of napi

  Previous releases - always broken:

   - netfilter: fully validate NFT_DATA_VALUE on store to data registers

   - unix: several fixes for OoB data

   - tcp: fix race for duplicate reqsk on identical SYN

   - bpf:
       - fix may_goto with negative offset
       - fix the corner case with may_goto and jump to the 1st insn
       - fix overrunning reservations in ringbuf

   - can:
       - j1939: recover socket queue on CAN bus error during BAM
         transmission
       - mcp251xfd: fix infinite loop when xmit fails

   - dsa: microchip: monitor potential faults in half-duplex mode

   - eth: vxlan: pull inner IP header in vxlan_xmit_one()

   - eth: ionic: fix kernel panic due to multi-buffer handling

  Misc:

   - selftest: unix tests refactor and a lot of new cases added"

* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: mana: Fix possible double free in error handling path
  selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
  af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
  selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
  selftest: af_unix: Check SIGURG after every send() in msg_oob.c
  selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
  af_unix: Don't stop recv() at consumed ex-OOB skb.
  selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
  af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
  af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
  selftest: af_unix: Add msg_oob.c.
  selftest: af_unix: Remove test_unix_oob.c.
  tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  net: usb: qmi_wwan: add Telit FN912 compositions
  tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
  ionic: use dev_consume_skb_any outside of napi
  net: dsa: microchip: fix wrong register write when masking interrupt
  Fix race for duplicate reqsk on identical SYN
  ibmvnic: Add tx check to prevent skb leak
  ...

Pull sound fixes from Takashi Iwai:
 "This became bigger than usual, as it receives a pile of pending ASoC
  fixes. Most of changes are for device-specific issues while there are
  a few core fixes that are all rather trivial:

   - DMA-engine sync fixes

   - Continued MIDI2 conversion fixes

   - Various ASoC Intel SOF fixes

   - A series of ASoC topology fixes for memory handling

   - AMD ACP fix, curing a recent regression, too

   - Platform / codec-specific fixes for mediatek, atmel, realtek, etc"

* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
  ASoC: rt5645: fix issue of random interrupt from push-button
  ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
  ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
  ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
  ALSA: dmaengine_pcm: terminate dmaengine before synchronize
  ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
  ALSA: PCM: Allow resume only for suspended streams
  ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
  ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
  ASoC: fsl-asoc-card: set priv->pdev before using it
  ASoC: amd: acp: move chip->flag variable assignment
  ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
  ASoC: amd: acp: add a null check for chip_pdev structure
  ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
  ASoC: q6apm-lpass-dai: close graph on prepare errors
  ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
  ASoC: topology: Fix route memory corruption
  ASoC: rt722-sdca-sdw: add debounce time for type detection
  ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
  ...

Building with W=1 in some configurations produces a false positive
warning for kallsyms:

kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
  503 |                 strcpy(buffer, name);
      |                 ^~~~~~~~~~~~~~~~~~~~

This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.

The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.

Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.

Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.

For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.

Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.

Fixes: a54756cb ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.

For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.

Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.

And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.

Fixes: e588bb1e ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two Netfilter fixes for net:

Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
	 to move the sysctl toggle to enable SRv6 netfilter hooks from
	 nf_conntrack to the core, from Jianguo Wu.

Patch #2 fixes a possible pointer leak to userspace due to insufficient
	 validation of NFT_DATA_VALUE.

Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.

netfilter pull request 24-06-27

* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================

Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.

Fixes: a69839d4 ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Current code configures GCR3 even when device is attached to identity
domain. So that we can support SVA with identity domain. This means in
attach device path it updates Guest Translation related bits in DTE.

Commit de111f6b ("iommu/amd: Enable Guest Translation after reading
IOMMU feature register") missed to enable Control[GT] bit in resume
path. Its causing certain laptop to fail to resume after suspend.

This is because we have inconsistency between between control register
(GT is disabled) and DTE (where we have enabled guest translation related
bits) in resume path. And IOMMU hardware throws ILLEGAL_DEV_TABLE_ENTRY.

Fix it by enabling GT bit in resume path.
Reported-by: Błażej Szczygieł <spaz16@wp.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218975
Fixes: de111f6b ("iommu/amd: Enable Guest Translation after reading IOMMU feature register")
Tested-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240621101533.20216-1-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

When a domain is attached to a device, the required cache tags are
assigned to the domain so that the related caches can be flushed
whenever it is needed. The device TLB cache tag is created based
on whether the ats_enabled field of the device's iommu data is set.
This creates an ordered dependency between cache tag assignment and
ATS enabling.

The device TLB cache tag would not be created if device's ATS is
enabled after the cache tag assignment. This causes devices with PCI
ATS support to malfunction.

The ATS control is exclusively owned by the iommu driver. Hence, move
cache_tag_assign_domain() after PCI ATS enabling to make sure that the
device TLB cache tag is created for the domain.

Fixes: 3b1d9e2b ("iommu/vt-d: Add cache tag assignment interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240620062940.201786-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Commit 87a6f1f2 ("iommu/amd: Introduce per-device domain ID to fix
potential TLB aliasing issue") introduced per device domain ID when
domain is configured with v2 page table. And in invalidation path, it
uses per device structure (dev_data->gcr3_info.domid) to get the domain ID.

In detach_device() path, current code tries to invalidate IOMMU cache
after removing dev_data from domain device list. This means when domain
is configured with v2 page table, amd_iommu_domain_flush_all() will not be
able to invalidate cache as device is already removed from domain device
list.

This is causing change domain tests (changing domain type from identity to DMA)
to fail with IO_PAGE_FAULT issue.

Hence invalidate cache and update DTE before updating data structures.
Reported-by: FahHean Lee <fahhean.lee@amd.com>
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Fixes: 87a6f1f2 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Sairaj Arun Kodilkar <sairaj.arunkodilkar@amd.com>
Tested-by: FahHean Lee <fahhean.lee@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240620060552.13984-1-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Kuniyuki Iwashima says:

====================
af_unix: Fix bunch of MSG_OOB bugs and add new tests.

This series rewrites the selftest for AF_UNIX MSG_OOB and fixes
bunch of bugs that AF_UNIX behaves differently compared to TCP.

Note that the test discovered few more bugs in TCP side, which
will be fixed in another series.
====================

Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.

Without fix:

  #  RUN           msg_oob.no_peek.oob ...
  # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
  # oob: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.oob
  not ok 2 msg_oob.no_peek.oob

With fix:

  #  RUN           msg_oob.no_peek.oob ...
  #            OK  msg_oob.no_peek.oob
  ok 2 msg_oob.no_peek.oob

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.

This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).

This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.

This patch adds some test cases for SO_OOBINLINE.

Note the new test cases found two bugs in TCP.

  1) After reading OOB data with non-inline mode, we can re-read
     the data by setting SO_OOBINLINE.

  #  RUN           msg_oob.no_peek.inline_oob_ahead_break ...
  # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
  # msg_oob.c:147:inline_oob_ahead_break:TCP     :oworld
  #            OK  msg_oob.no_peek.inline_oob_ahead_break
  ok 14 msg_oob.no_peek.inline_oob_ahead_break

  2) The head OOB data is dropped if SO_OOBINLINE is disabled
     if a new OOB data is queued.

  #  RUN           msg_oob.no_peek.inline_ex_oob_drop ...
  # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
  # msg_oob.c:172:inline_ex_oob_drop:TCP     :y
  # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:inline_ex_oob_drop:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.inline_ex_oob_drop
  ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.

  >>> from socket import *
  >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
  >>> c1.send(b'hellowor', MSG_OOB)
  8
  >>> c2.recv(1, MSG_OOB)  # consume OOB data stays at middle of recvq.
  b'r'
  >>> c1.send(b'ld', MSG_OOB)
  2
  >>> c2.recv(10)          # recv() stops at the old consumed OOB
  b'hellowo'               # should be 'hellowol'

manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.

Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
  # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
  # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
  # ex_oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_ahead_break
  not ok 11 msg_oob.no_peek.ex_oob_ahead_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
  # msg_oob.c:147:ex_oob_ahead_break:TCP     :helloworl
  #            OK  msg_oob.no_peek.ex_oob_ahead_break
  ok 11 msg_oob.no_peek.ex_oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While testing, I found some weird behaviour on the TCP side as well.

For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.

  #  RUN           msg_oob.no_peek.ex_oob_drop ...
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop:TCP     :Resource temporarily unavailable
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:ex_oob_drop:TCP     :Invalid argument
  #            OK  msg_oob.no_peek.ex_oob_drop
  ok 9 msg_oob.no_peek.ex_oob_drop

  #  RUN           msg_oob.no_peek.ex_oob_drop_2 ...
  # msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop_2:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.ex_oob_drop_2
  ok 10 msg_oob.no_peek.ex_oob_drop_2

This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5

and its peer recv()s "hell" and "o".

  >>> c2.recv(10)
  b'hell'
  >>> c2.recv(1, MSG_OOB)
  b'o'

Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.

Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.

  >>> c2.setblocking(False)  # This causes -EAGAIN even with available data
  >>> c2.recv(5)
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  BlockingIOError: [Errno 11] Resource temporarily unavailable

However, next recv() will return the following available data, "world".

  >>> c2.recv(5)
  b'world'

When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.

Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().

This patch also adds a test case that covers the issue.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
  # msg_oob.c:135:ex_oob_break:Expected:ld
  # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
  # ex_oob_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_break
  not ok 8 msg_oob.no_peek.ex_oob_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  #            OK  msg_oob.no_peek.ex_oob_break
  ok 8 msg_oob.no_peek.ex_oob_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>