- 20 May, 2017 40 commits
-
-
Marek Szyprowski authored
commit 500fcc08 upstream. This patch adds missing checks for dma_map_single() failure and proper error reporting. Although this issue was harmless on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes the following DMA API debug warning: WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28 dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single] Modules linked in: CPU: 1 PID: 3785 Comm: (agetty) Tainted: G W 4.11.0-rc1-00137-g07ca963-dirty #59 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c072a114>] (check_unmap+0x8a0/0xf28) [<c072a114>] (check_unmap) from [<c072a834>] (debug_dma_unmap_page+0x98/0xc8) [<c072a834>] (debug_dma_unmap_page) from [<c0803874>] (s3c24xx_serial_shutdown+0x314/0x52c) [<c0803874>] (s3c24xx_serial_shutdown) from [<c07f5124>] (uart_port_shutdown+0x54/0x88) [<c07f5124>] (uart_port_shutdown) from [<c07f522c>] (uart_shutdown+0xd4/0x110) [<c07f522c>] (uart_shutdown) from [<c07f6a8c>] (uart_hangup+0x9c/0x208) [<c07f6a8c>] (uart_hangup) from [<c07c426c>] (__tty_hangup+0x49c/0x634) [<c07c426c>] (__tty_hangup) from [<c07c78ac>] (tty_ioctl+0xc88/0x16e4) [<c07c78ac>] (tty_ioctl) from [<c03b5f2c>] (do_vfs_ioctl+0xc4/0xd10) [<c03b5f2c>] (do_vfs_ioctl) from [<c03b6bf4>] (SyS_ioctl+0x7c/0x8c) [<c03b6bf4>] (SyS_ioctl) from [<c010b4a0>] (ret_fast_syscall+0x0/0x3c) Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
commit 768d64f4 upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
-
Eric Biggers authored
commit 6b06cdee upstream. When accessing an encrypted directory without the key, userspace must operate on filenames derived from the ciphertext names, which contain arbitrary bytes. Since we must support filenames as long as NAME_MAX, we can't always just base64-encode the ciphertext, since that may make it too long. Currently, this is solved by presenting long names in an abbreviated form containing any needed filesystem-specific hashes (e.g. to identify a directory block), then the last 16 bytes of ciphertext. This needs to be sufficient to identify the actual name on lookup. However, there is a bug. It seems to have been assumed that due to the use of a CBC (ciphertext block chaining)-based encryption mode, the last 16 bytes (i.e. the AES block size) of ciphertext would depend on the full plaintext, preventing collisions. However, we actually use CBC with ciphertext stealing (CTS), which handles the last two blocks specially, causing them to appear "flipped". Thus, it's actually the second-to-last block which depends on the full plaintext. This caused long filenames that differ only near the end of their plaintexts to, when observed without the key, point to the wrong inode and be undeletable. For example, with ext4: # echo pass | e4crypt add_key -p 16 edir/ # seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l 100000 # sync # echo 3 > /proc/sys/vm/drop_caches # keyctl new_session # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l 2004 # rm -rf edir/ rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning ... To fix this, when presenting long encrypted filenames, encode the second-to-last block of ciphertext rather than the last 16 bytes. Although it would be nice to solve this without depending on a specific encryption mode, that would mean doing a cryptographic hash like SHA-256 which would be much less efficient. This way is sufficient for now, and it's still compatible with encryption modes like HEH which are strong pseudorandom permutations. Also, changing the presented names is still allowed at any time because they are only provided to allow applications to do things like delete encrypted directories. They're not designed to be used to persistently identify files --- which would be hard to do anyway, given that they're encrypted after all. For ease of backports, this patch only makes the minimal fix to both ext4 and f2fs. It leaves ubifs as-is, since ubifs doesn't compare the ciphertext block yet. Follow-on patches will clean things up properly and make the filesystems use a shared helper function. Fixes: 5de0b4d0 ("ext4 crypto: simplify and speed up filename encryption") Reported-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Biggers authored
commit 272f98f6 upstream. To mitigate some types of offline attacks, filesystem encryption is designed to enforce that all files in an encrypted directory tree use the same encryption policy (i.e. the same encryption context excluding the nonce). However, the fscrypt_has_permitted_context() function which enforces this relies on comparing struct fscrypt_info's, which are only available when we have the encryption keys. This can cause two incorrect behaviors: 1. If we have the parent directory's key but not the child's key, or vice versa, then fscrypt_has_permitted_context() returned false, causing applications to see EPERM or ENOKEY. This is incorrect if the encryption contexts are in fact consistent. Although we'd normally have either both keys or neither key in that case since the master_key_descriptors would be the same, this is not guaranteed because keys can be added or removed from keyrings at any time. 2. If we have neither the parent's key nor the child's key, then fscrypt_has_permitted_context() returned true, causing applications to see no error (or else an error for some other reason). This is incorrect if the encryption contexts are in fact inconsistent, since in that case we should deny access. To fix this, retrieve and compare the fscrypt_contexts if we are unable to set up both fscrypt_infos. While this slightly hurts performance when accessing an encrypted directory tree without the key, this isn't a case we really need to be optimizing for; access *with* the key is much more important. Furthermore, the performance hit is barely noticeable given that we are already retrieving the fscrypt_context and doing two keyring searches in fscrypt_get_encryption_info(). If we ever actually wanted to optimize this case we might start by caching the fscrypt_contexts. Signed-off-by:
-
Linus Torvalds authored
commit 394e4f5d upstream. Commit 17a9be31 ("initramfs: Always do fput() and load modules after rootfs populate") introduced an error for the CONFIG_BLK_DEV_RAM=y case, because even though the code looks fine, the compiler really wants a statement after a label, or you'll get complaints: init/initramfs.c: In function 'populate_rootfs': init/initramfs.c:644:2: error: label at end of compound statement That commit moved the subsequent statements to outside the compound statement, leaving the label without any associated statements. Reported-by:
Jörg Otte <jrg.otte@gmail.com> Fixes: 17a9be31 ("initramfs: Always do fput() and load modules after rootfs populate") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stafford Horne authored
commit 17a9be31 upstream. In OpenRISC we do not have a bootloader passed initrd, but the built in initramfs does contain the /init and other binaries, including modules. The previous commit 08865514 ("initramfs: finish fput() before accessing any binary from initramfs") made a change to only call fput() if the bootloader initrd was available, this caused intermittent crashes for OpenRISC. This patch changes the fput() to happen unconditionally if any rootfs is loaded. Also, I added some comments to make it a bit more clear why we call unpack_to_rootfs() multiple times. Fixes: 08865514 ("initramfs: finish fput() before accessing any binary from initramfs") Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Jan Kara authored
commit 3adc5fcb upstream. Commit b685d3d6 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions. Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d6 CC: Jaegeuk Kim <jaegeuk@kernel.org> CC: linux-f2fs-devel@lists.sourceforge.net Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 6332cd32 upstream. If user has no key under an encrypted dir, fscrypt gives digested dentries. Previously, when looking up a dentry, f2fs only checks its hash value with first 4 bytes of the digested dentry, which didn't handle hash collisions fully. This patch enhances to check entire dentry bytes likewise ext4. Eric reported how to reproduce this issue by: # seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch # find edir -type f | xargs stat -c %i | sort | uniq | wc -l 100000 # sync # echo 3 > /proc/sys/vm/drop_caches # keyctl new_session # find edir -type f | xargs stat -c %i | sort | uniq | wc -l 99999 Reported-by:
-
Sheng Yong authored
commit d3bb910c upstream. Commit 88c5c13a (f2fs: fix multiple f2fs_add_link() calls having same name) does not cover the scenario where inline dentry is enabled. In that case, F2FS_I(dir)->task will be NULL, and __f2fs_add_link will lookup dentries one more time. This patch fixes it by moving the assigment of current task to a upper level to cover both normal and inline dentry. Fixes: 88c5c13a (f2fs: fix multiple f2fs_add_link() calls having same name) Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Reviewed-by:
-
Jaegeuk Kim authored
commit 9bb02c36 upstream. This patch fixes the following scenario. - f2fs_create/f2fs_mkdir - write_checkpoint - f2fs_mark_inode_dirty_sync - block_operations - f2fs_lock_all - f2fs_sync_inode_meta - f2fs_unlock_all - sync_inode_metadata - f2fs_lock_op - f2fs_write_inode - update_inode_page - get_node_page return -ENOENT - new_inode_page - fill_node_footer - f2fs_mark_inode_dirty_sync - ... - f2fs_unlock_op - f2fs_inode_synced - f2fs_lock_all - do_checkpoint In this checkpoint, we can get an inode page which contains zeros having valid node footer only. Signed-off-by:
-
Jaegeuk Kim authored
commit c6f82fe9 upstream. This reverts commit 3436c4bd. This makes a leak to register dirty segments. I reproduced the issue by modified postmark which injects a lot of file create/delete/update and finally triggers huge number of SSR allocations. [Jaegeuk Kim: Change missing incorrect comment] Signed-off-by:
-
Jaegeuk Kim authored
commit c541a51b upstream. This patch fixes missing increased max cost caused by a patch that we increased cose of data segments in greedy algorithm. Fixes: b9cd2061 "f2fs: node segment is prior to data segment selected victim" Signed-off-by:
-
Ross Zwisler authored
commit 876f2946 upstream. This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit fb26a1cb upstream. DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by:
-
Jan Kara authored
commit cd656375 upstream. Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by:
-
Ross Zwisler authored
commit 4636e70b upstream. Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by:
-
Dan Williams authored
commit 565851c9 upstream. Usage of device_lock() for dax_region attributes is unnecessary and deadlock prone. It's unnecessary because the order of registration / un-registration guarantees that drvdata is always valid. It's deadlock prone because it sets up this situation: ndctl D 0 2170 2082 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x402/0x980 ? __mutex_lock+0x158/0x980 ? align_show+0x2b/0x80 [dax] ? kernfs_seq_start+0x2f/0x90 mutex_lock_nested+0x1b/0x20 align_show+0x2b/0x80 [dax] dev_attr_show+0x20/0x50 ndctl D 0 2186 2079 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 __kernfs_remove+0x1f6/0x340 ? kernfs_remove_by_name_ns+0x45/0xa0 ? remove_wait_queue+0x70/0x70 kernfs_remove_by_name_ns+0x45/0xa0 remove_files.isra.1+0x35/0x70 sysfs_remove_group+0x44/0x90 sysfs_remove_groups+0x2e/0x50 dax_region_unregister+0x25/0x40 [dax] devm_action_release+0xf/0x20 release_nodes+0x16d/0x2b0 devres_release_all+0x3c/0x60 device_release_driver_internal+0x17d/0x220 device_release_driver+0x12/0x20 unbind_store+0x112/0x160 ndctl/2170 is trying to acquire the device_lock() to read an attribute, and ndctl/2186 is holding the device_lock() while trying to drain all active attribute readers. Thanks to Yi Zhang for the reproduction script. Fixes: d7fe1a67 ("dax: add region 'id', 'size', and 'align' attributes") Reported-by:
Yi Zhang <yizhan@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit ed01e50a upstream. If device_add() fails, cleanup the cdev. Otherwise, we leak a kobj_map() with a stale device number. As Jason points out, there is a small possibility that userspace has opened and mapped the device in the time between cdev_add() and the device_add() failure. We need a new kill_dax_dev() helper to invalidate any established mappings. Fixes: ba09c01d ("dax: convert to the cdev api") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
NeilBrown authored
commit 0c9d5b12 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by:
Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449 ("md/raid1: add failfast handling for reads.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Amir Goldstein authored
commit 4a99f3c8 upstream. The optimization for opaque dir create was wrongly being applied also to non-dir create. Fixes: 97c684cc ("ovl: create directories inside merged parent opaque") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
David Disseldorp authored
commit d8a6e505 upstream. An open directory may have a NULL private_data pointer prior to readdir. Fixes: 0de1f4c6 ("Add way to query server fs info for smb3") Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Rabin Vincent authored
commit 3998e6b8 upstream. When the final cifsFileInfo_put() is called from cifsiod and an oplock break work is queued, lockdep complains loudly: ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #21 Not tainted --------------------------------------------- kworker/0:2/78 is trying to acquire lock: ("cifsiod"){++++.+}, at: flush_work+0x215/0x350 but task is already holding lock: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock("cifsiod"); lock("cifsiod"); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by kworker/0:2/78: #0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 #1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0 stack backtrace: CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21 Workqueue: cifsiod cifs_writev_complete Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? match_held_lock+0x20/0x2b0 ? trace_hardirqs_off_caller+0x86/0x130 ? mark_lock+0xa6/0x920 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? flush_work+0x215/0x350 flush_work+0x236/0x350 ? flush_work+0x215/0x350 ? destroy_worker+0x170/0x170 __cancel_work_timer+0x17d/0x210 ? ___preempt_schedule+0x16/0x18 cancel_work_sync+0x10/0x20 cifsFileInfo_put+0x338/0x7f0 cifs_writedata_release+0x2a/0x40 ? cifs_writedata_release+0x2a/0x40 cifs_writev_complete+0x29d/0x850 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 This is a real warning. Since the oplock is queued on the same workqueue this can deadlock if there is only one worker thread active for the workqueue (which will be the case during memory pressure when the rescuer thread is handling it). Furthermore, there is at least one other kind of hang possible due to the oplock break handling if there is only worker. (This can be reproduced without introducing memory pressure by having passing 1 for the max_active parameter of cifsiod.) cifs_oplock_break() can wait indefintely in the filemap_fdatawait() while the cifs_writev_complete() work is blocked: sysrq: SysRq : Show Blocked State task PC stack pid father kworker/0:1 D 0 16 2 0x00000000 Workqueue: cifsiod cifs_oplock_break Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x4a/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 cifs_oplock_break+0x651/0x710 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 dd D 0 683 171 0x00000000 Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x29/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 filemap_write_and_wait+0x4e/0x70 cifs_flush+0x6a/0xb0 filp_close+0x52/0xa0 __close_fd+0xdc/0x150 SyS_close+0x33/0x60 entry_SYSCALL_64_fastpath+0x1f/0xbe Showing all locks held in the system: 2 locks held by kworker/0:1/16: #0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0 #1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0 Showing busy workqueues and worker pools: workqueue cifsiod: flags=0xc pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1 in-flight: 16:cifs_oplock_break delayed: cifs_writev_complete, cifs_echo_request pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3 Fix these problems by creating a a new workqueue (with a rescuer) for the oplock break work. Signed-off-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
-
David Disseldorp authored
commit 6026685d upstream. As with 61876395, an open directory may have a NULL private_data pointer prior to readdir. CIFS_ENUMERATE_SNAPSHOTS must check for this before dereference. Fixes: 834170c8 ("Enable previous version support") Signed-off-by:
-
David Disseldorp authored
commit 0e5c7955 upstream. The server may respond with success, and an output buffer less than sizeof(struct smb_snapshot_array) in length. Do not leak the output buffer in this case. Fixes: 834170c8 ("Enable previous version support") Signed-off-by:
-
Björn Jacke authored
commit b704e70b upstream. - trailing space maps to 0xF028 - trailing period maps to 0xF029 This fix corrects the mapping of file names which have a trailing character that would otherwise be illegal (period or space) but is allowed by POSIX. Signed-off-by:
-
Steve French authored
commit 7db0a6ef upstream. Macs send the maximum buffer size in response on ioctl to validate negotiate security information, which causes us to fail the mount as the response buffer is larger than the expected response. Changed ioctl response processing to allow for padding of validate negotiate ioctl response and limit the maximum response size to maximum buffer size. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit 26c9cb66 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by:
-
Sachin Prabhu authored
commit 7d0c234f upstream. commit 620d8745 ("Introduce cifs_copy_file_range()") changes the behaviour of the cifs ioctl call CIFS_IOC_COPYCHUNK_FILE. In case of successful writes, it now returns the number of bytes written. This return value is treated as an error by the xfstest cifs/001. Depending on the errno set at that time, this may or may not result in the test failing. The patch fixes this by setting the return value to 0 in case of successful writes. Fixes: commit 620d8745 ("Introduce cifs_copy_file_range()") Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Sachin Prabhu authored
commit cd8c4296 upstream. Incorrect return value for shares not using the prefix path means that we will never match superblocks for these shares. Fixes: commit c1d8b24d ("Compare prepaths when comparing superblocks") Signed-off-by:
-
Vlastimil Babka authored
commit 62be1511 upstream. Patch series "more robust PF_MEMALLOC handling" This series aims to unify the setting and clearing of PF_MEMALLOC, which prevents recursive reclaim. There are some places that clear the flag unconditionally from current->flags, which may result in clearing a pre-existing flag. This already resulted in a bug report that Patch 1 fixes (without the new helpers, to make backporting easier). Patch 2 introduces the new helpers, modelled after existing memalloc_noio_* and memalloc_nofs_* helpers, and converts mm core to use them. Patches 3 and 4 convert non-mm code. This patch (of 4): __alloc_pages_direct_compact() sets PF_MEMALLOC to prevent deadlock during page migration by lock_page() (see the comment in __unmap_and_move()). Then it unconditionally clears the flag, which can clear a pre-existing PF_MEMALLOC flag and result in recursive reclaim. This was not a problem until commit a8161d1e ("mm, page_alloc: restructure direct compaction handling in slowpath"), because direct compation was called only after direct reclaim, which was skipped when PF_MEMALLOC flag was set. Even now it's only a theoretical issue, as the new callsite of __alloc_pages_direct_compact() is reached only for costly orders and when gfp_pfmemalloc_allowed() is true, which means either __GFP_NOMEMALLOC is in gfp_flags or in_interrupt() is true. There is no such known context, but let's play it safe and make __alloc_pages_direct_compact() robust for cases where PF_MEMALLOC is already set. Fixes: a8161d1e ("mm, page_alloc: restructure direct compaction handling in slowpath") Link: http://lkml.kernel.org/r/20170405074700.29871-2-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by:
-
Johannes Weiner authored
commit 2a2e4885 upstream. Since commit 59dc76b0 ("mm: vmscan: reduce size of inactive file list") we noticed bigger IO spikes during changes in cache access patterns. The patch in question shrunk the inactive list size to leave more room for the current workingset in the presence of streaming IO. However, workingset transitions that previously happened on the inactive list are now pushed out of memory and incur more refaults to complete. This patch disables active list protection when refaults are being observed. This accelerates workingset transitions, and allows more of the new set to establish itself from memory, without eating into the ability to protect the established workingset during stable periods. The workloads that were measurably affected for us were hit pretty bad by it, with refault/majfault rates doubling and tripling during cache transitions, and the machines sustaining half-hour periods of 100% IO utilization, where they'd previously have sub-minute peaks at 60-90%. Stateful services that handle user data tend to be more conservative with kernel upgrades. As a result we hit most page cache issues with some delay, as was the case here. The severity seemed to warrant a stable tag. Fixes: 59dc76b0 ("mm: vmscan: reduce size of inactive file list") Link: http://lkml.kernel.org/r/20170404220052.27593-1-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
commit a5f6a6a9 upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.comSigned-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 55635ba7 upstream. Patch series "Properly invalidate data in the cleancache", v2. We've noticed that after direct IO write, buffered read sometimes gets stale data which is coming from the cleancache. The reason for this is that some direct write hooks call call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero, so we may not invalidate data in the cleancache. Another odd thing is that we check only for ->nrpages and don't check for ->nrexceptional, but invalidate_inode_pages2[_range] also invalidates exceptional entries as well. So we invalidate exceptional entries only if ->nrpages != 0? This doesn't feel right. - Patch 1 fixes direct IO writes by removing ->nrpages check. - Patch 2 fixes similar case in invalidate_bdev(). Note: I only fixed conditional cleancache_invalidate_inode() here. Do we also need to add ->nrexceptional check in into invalidate_bdev()? - Patches 3-4: some optimizations. This patch (of 4): Some direct IO write fs hooks call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero. This can't be right, because invalidate_inode_pages2[_range]() also invalidate data in the cleancache via cleancache_invalidate_inode() call. So if page cache is empty but there is some data in the cleancache, buffered read after direct IO write would get stale data from the cleancache. Also it doesn't feel right to check only for ->nrpages because invalidate_inode_pages2[_range] invalidates exceptional entries as well. Fix this by calling invalidate_inode_pages2[_range]() regardless of nrpages state. Note: nfs,cifs,9p doesn't need similar fix because the never call cleancache_get_page() (nor directly, nor via mpage_readpage[s]()), so they are not affected by this bug. Fixes: c515e1fd ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-2-aryabinin@virtuozzo.comSigned-off-by:
-
Luis Henriques authored
commit eeca958d upstream. The ceph_inode_xattr needs to be released when removing an xattr. Easily reproducible running the 'generic/020' test from xfstests or simply by doing: attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test While there, also fix the error path. Here's the kmemleak splat: unreferenced object 0xffff88001f86fbc0 (size 64): comm "attr", pid 244, jiffies 4294904246 (age 98.464s) hex dump (first 32 bytes): 40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff @........28..... 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ backtrace: [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0 [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0 [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820 [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40 [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60 [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0 [<ffffffff8111fdd1>] removexattr+0x41/0x60 [<ffffffff8111fe65>] path_removexattr+0x75/0xa0 [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10 [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Michal Hocko authored
commit 81be3dee upstream. getxattr uses vmalloc to allocate memory if kzalloc fails. This is filled by vfs_getxattr and then copied to the userspace. vmalloc, however, doesn't zero out the memory so if the specific implementation of the xattr handler is sloppy we can theoretically expose a kernel memory. There is no real sign this is really the case but let's make sure this will not happen and use vzalloc instead. Fixes: 779302e6 ("fs/xattr.c:getxattr(): improve handling of allocation failures") Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.orgAcked-by:
Kees Cook <keescook@chromium.org> Reported-by:
-
Martin Brandenburg authored
commit 53950ef5 upstream. Let the server figure this out because our size might be out of date or not present. The bug was that xfs_io -f -t -c "pread -v 0 100" /mnt/foo echo "Test" > /mnt/foo xfs_io -f -t -c "pread -v 0 100" /mnt/foo fails because the second truncate did not happen if nothing had requested the size after the write in echo. Thus i_size was zero (not present) and the orangefs_setattr though i_size was zero and there was nothing to do. Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
-
Martin Brandenburg authored
commit 17930b25 upstream. Since orangefs_lookup calls orangefs_iget which calls orangefs_inode_getattr, getattr_time will get set. Signed-off-by:
-
Martin Brandenburg authored
commit e675c5ec upstream. Also don't check flags as this has been validated by the VFS already. Fix an off-by-one error in the max size checking. Stop logging just because userspace wants to write attributes which do not fit. This and the previous commit fix xfstests generic/020. Signed-off-by:
-
