Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
The tools/testing/selftests/bpf/test_verifier.c file is
way too large, and since most people add their at the
end of the list it's very prone to conflicts.

Break it up in the simplest possible way - slice the
array up into smaller C files and include them in the
right spot.

Tested:
$ make -C tools/testing/selftests/bpf/
$ cd tools/testing/selftests/bpf/ ; make

v2:

The indentation is reduced further as discussed and lines folded.
The conversion was scripted, and double checked by hand.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Break up the rest of test_verifier tests into separate
files.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Break up the first 10 kLoC of test verifier test cases
out into smaller files.  Looks like git line counting
gets a little flismy above 16 bit integers, so we need
two commits to break up test_verifier.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

test_verifier.c has grown to be very long (almost 16 kLoC),
and it is very conflict prone since we always add tests at
the end.

Try to break it apart a little bit.  Allow test snippets
to be defined in separate files and include them automatically
into the huge test array.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jiong Wang says:

====================
v3 -> v4:
 - Fixed rebase issue. JMP32 checks were missing in two new functions:
    + kernel/bpf/verifier.c:insn_is_cond_jump
    + drivers/net/ethernet/netronome/nfp/bpf/main.h:is_mbpf_cond_jump
   (Daniel)
 - Further rebased on top of latest llvm-readelf change.

v2 -> v3:
 - Added missed check on JMP32 inside bpf_jit_build_body. (Sandipan)
 - Wrap ?: statements in s390 port with brace. They are used by macros
   which doesn't guard the operand with brace.
 - Fixed the ',' issues test_verifier change.
 - Reorder two selftests patches to be near each other.
 - Rebased on top of latest bpf-next.

v1 -> v2:
 - Updated encoding. Use reserved insn class 0x6 instead of packing with
   existing BPF_JMP. (Alexei)
 - Updated code comments in s390 port. (Martin)
 - Separate JIT function for jeq32_imm in NFP port. (Jakub)
 - Re-implemented auto-testing support. (Jakub)
 - Moved testcases to test_verifer.c, plus more unit tests. (Jakub)
 - Fixed JEQ/JNE range deduction. (Jakub)
 - Also supported JSET in this patch set.
 - Fixed/Improved range deduction for all the other operations. All C
   programs under bpf selftest passed verification now.
 - Improved min/max code implementation.
 - Fixed bpftool/disassembler.

Current eBPF ISA has 32-bit sub-register and has defined a set of ALU32
instructions.

However, there is no JMP32 instructions, the consequence is code-gen for
32-bit sub-registers is not efficient. For example, explicit sign-extension
from 32-bit to 64-bit is needed for signed comparison.

Adding JMP32 instruction therefore could complete eBPF ISA on 32-bit
sub-register support. This also match those JMP32 instructions in most JIT
backends, for example x64-64 and AArch64. These new eBPF JMP32 instructions
could have one-to-one map on them.

A few verifier ALU32 related bugs has been fixed recently, and JMP32
introduced by this set further improves BPF sub-register ecosystem. Once
this is landed, BPF programs using 32-bit sub-register ISA could get
reasonably good support from verifier and JIT compilers. Users then could
compare the runtime efficiency of one BPF program under both modes, and
could use the one shown better from benchmark result.

From benchmark results on some Cilium BPF programs, for 64-bit arches,
after JMP32 introduced, programs compiled with -mattr=+alu32 (meaning
enable sub-register usage) are smaller in code size and generally smaller
in verifier processed insn number.

Benchmark results
===
Text size in bytes (generated by "size")
---
LLVM code-gen option   default  alu32  alu32/jmp32  change Vs.  change Vs.
                                                    alu32       default
bpf_lb-DLB_L3.o:       6456     6280   6160         -1.91%      -4.58%
bpf_lb-DLB_L4.o:       7848     7664   7136         -6.89%      -9.07%
bpf_lb-DUNKNOWN.o:     2680     2664   2568         -3.60%      -4.18%
bpf_lxc.o:             104824   104744 97360        -7.05%      -7.12%
bpf_netdev.o:          23456    23576  21632        -8.25%      -7.78%
bpf_overlay.o:         16184    16304  14648        -10.16%     -9.49%

Processed instruction number
---
LLVM code-gen option   default  alu32  alu32/jmp32  change Vs.  change Vs.
                                                    alu32       default
bpf_lb-DLB_L3.o:       1579     1281   1295         +1.09%      -17.99%
bpf_lb-DLB_L4.o:       2045     1663   1556         -6.43%      -23.91%
bpf_lb-DUNKNOWN.o:     606      513    501          -2.34%      -17.33%
bpf_lxc.o:             85381    103218 94435        -8.51%      +10.60%
bpf_netdev.o:          5246     5809   5200         -10.48%     -0.08%
bpf_overlay.o:         2443     2705   2456         -9.02%      -0.53%

It is even better for 32-bit arches like x32, arm32 and nfp etc, as now
some conditional jump will become JMP32 which doesn't require code-gen for
high 32-bit comparison.

Encoding
===
The new JMP32 instructions are using new BPF_JMP32 class which is using
the reserved eBPF class number 0x6. And BPF_JA/CALL/EXIT only exist for
BPF_JMP, they are reserved opcode for BPF_JMP32.

LLVM support
===
A couple of unit tests has been added and included in this set. Also LLVM
code-gen for JMP32 has been added, so you could just compile any BPF C
program with both -mcpu=probe and -mattr=+alu32 specified. If you are
compiling on a machine with kernel patched by this set, LLVM will select
the ISA automatically based on host probe results. Otherwise specify
-mcpu=v3 and -mattr=+alu32 could also force use JMP32 ISA.

   LLVM support could be found at:

     https://github.com/Netronome/llvm/tree/jmp32-v2

   (clang driver also taught about the new "v3" processor, will send out
    merge request for both clang and llvm once kernel set landed.)

JIT backends support
===
A couple of JIT backends has been supported in this set except SPARC and
MIPS. It shouldn't be a big issue for these two ports as LLVM default won't
generate JMP32 insns, it will only generate them when host machine is
probed to be with the support.

Thanks.
====================
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch enables testing some eBPF programs under sub-register
compilation mode.

Only enable this when there is BPF_JMP32 support on both LLVM and kernel.
This is because only after BPF_JMP32 added, code-gen for complex program
under sub-register mode will be clean enough to pass verification.

This patch splits TEST_GEN_FILES into BPF_OBJ_FILES and
BPF_OBJ_FILES_DUAL_COMPILE. The latter are those objects we would like to
compile for both default and sub-register mode. They are also objects used
by "test_progs".
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds unit tests for new JMP32 instructions.

This patch also added the new BPF_JMP32_REG and BPF_JMP32_IMM macros to
samples/bpf/bpf_insn.h so that JMP32 insn builders are available to tests
under 'samples' directory.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on NFP.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on s390.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on ppc.

For JMP32 | JSET, instruction encoding for PPC_RLWINM_DOT is added to check
the result of ANDing low 32-bit of operands.

Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on arm.

For JSET, "ands" (AND with flags updated) is used, so corresponding
encoding helper is added.

Cc: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on arm64.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on x32.
Also fixed several reverse xmas tree coding style issues as I am there.

Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on x86_64.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds JIT blinds support for JMP32.

Like BPF_JMP_REG/IMM, JMP32 version are needed for building raw bpf insn.
They are added to both include/linux/filter.h and
tools/include/linux/filter.h.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements interpreting new JMP32 instructions.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The cfg code need to be aware of the new JMP32 instruction class so it
could partition functions correctly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch teaches disassembler about JMP32. There are two places to
update:

  - Class 0x6 now used by BPF_JMP32, not "unused".

  - BPF_JMP32 need to show comparison operands properly.
    The disassemble format is to add an extra "(32)" before the operands if
    it is a sub-register. A better disassemble format for both JMP32 and
    ALU32 just show the register prefix as "w" instead of "r", this is the
    format using by LLVM assembler.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch teach verifier about the new BPF_JMP32 instruction class.
Verifier need to treat it similar as the existing BPF_JMP class.
A BPF_JMP32 insn needs to go through all checks that have been done on
BPF_JMP.

Also, verifier is doing runtime optimizations based on the extra info
conditional jump instruction could offer, especially when the comparison is
between constant and register that the value range of the register could be
improved based on the comparison results. These code are updated
accordingly.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current min/max code does both signed and unsigned comparisons against
the input argument "val" which is "u64" and there is explicit type casting
when the comparison is signed.

As we will need slightly more complexer type casting when JMP32 introduced,
it is better to host the signed type casting. This makes the code more
clean with ignorable runtime overhead.

Also, code for J*GE/GT/LT/LE and JEQ/JNE are very similar, this patch
combine them.

The main purpose for this refactor is to make sure the min/max code will
still be readable and with minimum code duplication after JMP32 introduced.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The new eBPF instruction class JMP32 uses the reserved class number 0x6.
Kernel BPF ISA documentation updated accordingly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Björn Töpel says:

====================
This series adds an AF_XDP sock_diag interface for querying sockets
from user-space. Tools like iproute2 ss(8) can use this interface to
list open AF_XDP sockets.

The diagnostic provides information about the Rx/Tx/fill/completetion
rings, umem, memory usage and such. For a complete list, please refer
to the xsk_diag.c file.

The AF_XDP sock_diag interface is optional, and can be built as a
module. A separate patch series, adding ss(8) iproute2 support, will
follow.

v1->v2:
  * Removed extra newline
  * Zero-out all user-space facing structures prior setting the
    members
  * Added explicit "pad" member in _msg struct
  * Removed unused variable "req" in xsk_diag_handler_dump()

Thanks to Daniel for reviewing the series!
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds the sock_diag interface for querying sockets from user
space. Tools like iproute2 ss(8) can use this interface to list open
AF_XDP sockets.

The user-space ABI is defined in linux/xdp_diag.h and includes netlink
request and response structs. The request can query sockets and the
response contains socket information about the rings, umems, inode and
more.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit adds an id to the umem structure. The id uniquely
identifies a umem instance, and will be exposed to user-space via the
socket monitoring interface.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Track each AF_XDP socket in a per-netns list. This will be used later
by the sock_diag interface for querying sockets from userspace.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Before:
$ make -s -C tools/testing/selftests/bpf
readelf: Error: Missing knowledge of 32-bit reloc types used in DWARF
sections of machine number 247
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 1 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info

After:
$ make -s -C tools/testing/selftests/bpf

v2:
* use llvm-readelf instead of redirecting binutils' readelf stderr to
  /dev/null
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This adds the ability to read gso_segs from a BPF program.

v3: Use BPF_REG_AX instead of BPF_REG_TMP for the temporary register,
    as suggested by Martin.

v2: refined Eddie Hao patch to address Alexei feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eddie Hao <eddieh@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When 'bpftool feature' is executed it shows incorrect help string.

test# bpftool feature
Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]]
       bpftool bpftool help

       COMPONENT := { kernel | dev NAME }

Instead of fixing the help text by tweaking argv[] indices, this
patch changes the default action to 'probe'. It makes the behavior
consistent with other subcommands, where first subcommand without
extra parameter results in 'show' action.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
This set adds support for complete removal of dead code.

Patch 3 contains all the code removal logic, patches 2 and 4
additionally optimize branches around and to dead code.

Patches 6 and 7 allow offload JITs to take advantage of the
optimization.  After a few small clean ups (8, 9, 10) nfp
support is added (11, 12).

Removing code directly in the verifier makes it easy to adjust
the relevant metadata (line info, subprogram info).  JITs for
code store constrained architectures would have hard time
performing such adjustments at JIT level.  Removing subprograms
or line info is very hard once BPF core finished the verification.
For user space to perform dead code removal it would have to perform
the execution simulation/analysis similar to what the verifier does.

v3:
 - fix uninitilized var warning in GCC 6 (buildbot).
v4:
 - simplify the linfo-keeping logic (Yonghong).  Instead of
   trying to figure out that we are removing first instruction
   of a subprogram, just always keep last dead line info, if
   first live instruction doesn't have one.
v5:
 - improve comments (Martin Lau).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add a verifier callback to the nfp JIT to remove the instructions
the verifier deemed to be dead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Verifier will now optimize out branches to dead code, implement
the replace_insn callback to take advantage of that optimization.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instead of passing env->prog->len around, and trying to adjust
for optimized out instructions just save the initial number
of instructions in struct nfp_prog.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We fail program loading if jump lands on a skipped instruction.
This is for historical reasons, it used to be that we only skipped
instructions optimized out based on prior context, and therefore
the optimization would be buggy if we jumped directly to such
instruction (because the context would be skipped by the jump).

There are cases where instructions can be skipped without any
context, for example there is no point in generating code for:

	 r0 |= 0

We will also soon support dropping dead code, so make the skip
logic differentiate between "optimized with preceding context"
vs other skip types.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instruction number is meaningless at code gen phase.  The target
of the instruction is overwritten by nfp_fixup_branches().  The
convention is to put the raw offset in target address as a place
holder.  See cmp_* functions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Let offload JITs know when instructions are replaced and optimized
out, so they can update their state appropriately.  The optimizations
are best effort, if JIT returns an error from any callback verifier
will stop notifying it as state may now be out of sync, but the
verifier continues making progress.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The communication between the verifier and advanced JITs is based
on instruction indexes.  We have to keep them stable throughout
the optimizations otherwise referring to a particular instruction
gets messy quickly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add tests for newly added dead code elimination.  Both verifier
and BTF tests are added.  BTF test infrastructure has to be
extended to be able to account for line info which is eliminated
during dead code removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Unconditional branches by 0 instructions are basically noops
but they can result from earlier optimizations, e.g. a conditional
jumps which would never be taken or a conditional jump around
dead code.

Remove those branches.

v0.2:
 - s/opt_remove_dead_branches/opt_remove_nops/ (Jiong).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instead of overwriting dead code with jmp -1 instructions
remove it completely for root.  Adjust verifier state and
line info appropriately.

v2:
 - adjust func_info (Alexei);
 - make sure first instruction retains line info (Alexei).
v4: (Yonghong)
 - remove unnecessary if (!insn to remove) checks;
 - always keep last line info if first live instruction lacks one.
v5: (Martin Lau)
 - improve and clarify comments.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>