- 11 Sep, 2012 1 commit
-
-
Tony Lindgren authored
These workarounds do not apply for CONFIG_ARCH_OMAP2PLUS at all, so let's make it just CONFIG_ARCH_OMAP1. This is needed to for ARM common zImage changes for omap2+ to avoid including plat and mach headers. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Sep, 2012 7 commits
-
-
Jean-François Moine authored
On some machines using a specific hardware for console screen output, the update of the pixel frame buffer does not work correctly when using command line edition. This may be due to a memory cache bug in the machine on which the problem has been found, but an other solution is possible. This patch proposes to avoid touching directly the pixel frame buffer and to rebuild each character using the standard putc() function on command line edition. The resulting code is smaller and not obviously slower (no read access to the pixel frame buffer). Tested on a Cubox (ARM Marvell Dove 88AP510 SoC). Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
David Brown authored
The driver explicitly requests a clock rate for the UART, but it is off by a factor of four from the dividers that it programs into the UART. Fix this by setting the rate to 1/4 of the current value. Signed-off-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
-
Linus Walleij authored
Since commit 4fd0690b "serial: pl011: implement workaround for CTS clear event issue" the PL011 UART is no longer at risk to hang up, so get rid of the callback altogether. Cc: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Linus Walleij authored
The bug flag .interrupt_may_hang is not used since commit 4fd0690b "serial: pl011: implement workaround for CTS clear event issue" so delete it. Cc: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by:
-
Wei Yongjun authored
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Tony Lindgren authored
Request pins using pinctrl framework. Only show a warning on error as some boards set the pins in the bootloader even if CONFIG_PINCTRL is enabled. Signed-off-by:
-
Felipe Balbi authored
OMAP Architecture code, passes a few function pointers for UART driver to use in order to properly implement Power Management and Wakeup capabilities. The problem is that those function pointers, which are passed (ab)using platform_data on non-DT kernels, can't be passed down to drivers through DT. commit e5b57c03 (serial: omap: define helpers for pdata function pointers) failed to take DT kernels into consideration and caused a regression to DT kernel boot. Fix that by (re-)adding a check for valid pdata pointer together with valid pdata->$FUNCTION pointer. Reported-by:
Felipe Balbi <balbi@ti.com> Tested-by:
-
- 07 Sep, 2012 1 commit
-
-
Felipe Balbi authored
when rebasing patches on top of Greg's tty-next, it looks like automerge broke a few things which I didn't catch (for whatever reason I didn't have OMAP Serial enabled on .config) so I ended up breaking the build on Greg's tty-next branch. Fix the breakage by re-adding the three missing members on struct uart_omap_port. Reported-by:
-
- 06 Sep, 2012 27 commits
-
-
Tomas Hlavacek authored
Added tty_device_create_release() and bound to dev->release in tty_register_device_attr(). Added tty_port_register_device_attr() and used in uart_add_one_port() instead of tty_register_device_attr(). Signed-off-by:
Tomas Hlavacek <tmshlvck@gmail.com> Signed-off-by:
-
Tomas Hlavacek authored
Added file /sys/devices/.../tty/ttySX/uartclk to allow reading uartclk value in struct uart_port in serial_core via sysfs. tty_register_device() has been generalized and refactored in order to add support for setting drvdata and attribute_group to the device. Signed-off-by:
-
Stephen Rothwell authored
Fixes these build errors: In file included from drivers/tty/serial/sccnxp.c:20:0: include/linux/serial_core.h: In function 'uart_handle_break': include/linux/serial_core.h:543:30: error: dereferencing pointer to incomplete type Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
-
Huang Shijie authored
We call the get_device() in the mxs_auart_probe(). For the balance of the reference count, we should put the device in the mxs_auart_remove(). Signed-off-by:
Huang Shijie <shijie8@gmail.com> Signed-off-by:
-
Huang Shijie authored
After set the AUART_CTRL0_CLKGATE, the UART will gate all the clocks off. So the following line will not take effect. ................................................................ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); ................................................................ To fix this issue, the patch moves this gate-off line to the end of setting registers. Signed-off-by: -
Fengguang Wu authored
sizeof when applied to a pointer typed expression gives the size of the pointer. Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Felipe Balbi authored
enable RX FIFO for 16 characters and TX FIFO for 16 spaces. Tested-by:
Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
-
Felipe Balbi authored
nobody needs to access the uart_omap_port structure other than omap-serial.c file. Let's move that structure definition to the C source file in order to prevent anyone from accessing our structure. Tested-by:
-
Felipe Balbi authored
this driver doesn't use any from <plat/dmtimer.h>, so we can remove it without any problems. This will, however cause a problem because omap-serial.c was relying on indirect inclusion of <linux/platform_device.h>, let's fix the issue by including <linux/platform_device.h> on omap-serial.c as it should be. Tested-by:
-
Vikram Pandita authored
Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by:
Vikram Pandita <vikram.pandita@ti.com> Signed-off-by:
-
Felipe Balbi authored
if we would reach serial_omap_get_char() while Data Ready bit isn't set, we would return from it without kicking our pm timer. This would mean we would, eventually, have an unbalanced pm_runtime_get on our device which would prevent it from ever sleeping again. Tested-by:
-
Felipe Balbi authored
This has been missing from OMAP UART driver for quite a while and it's simple enough to implement it. Tested-by:
-
Ruchika Kharwar authored
This patch unlocks the port lock before calling a serial_core API and re-acquires the port lock after calling it. This patch fixes a system freeze issue seen when the serial_core API uart_write_wakeup() eventually attempts to acquire the port lock already acquired by omap serial interrupt handler. Tested-by:
Ruchika Kharwar <ruchika@ti.com> Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Signed-off-by:
Vijay Badawadagi <bvijay@ti.com> Signed-off-by:
-
Felipe Balbi authored
it makes no sense to mark our IRQ handler inline since it's passed as a function pointer when enabling the IRQ line. Tested-by:
-
Felipe Balbi authored
Two functions: omap_serial_fill_features_erratas() and of_get_uart_port_info() are only called from probe(). Marking them as __devinit gives us another oportunity to free some code after .init.text is done. Tested-by:
-
Ruchika Kharwar authored
pm_runtime_enable() needs to be invoked before pm_runtime_use_autosuspend(), and pm_runtime_set_autosuspend_delay() functions. Tested-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Felipe Balbi authored
When we're running our hardirq handler, there's not need to disable IRQs with spin_lock_irqsave() because IRQs are already disabled. It also makes no difference if we save or not IRQ flags. Switch over to simple spin_lock/spin_unlock and drop the "flags" variable. Tested-by:
-
Felipe Balbi authored
before removing the driver, let's make sure to force device into a suspended state in order to conserve power. Tested-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Felipe Balbi authored
if platform_get_drvdata() returns NULL, that's quite a nasty bug on the driver which we want to catch ASAP. Otherwise, that check is hugely unneeded. Tested-by:
-
Felipe Balbi authored
by the time we call our first pm_runtme_get_sync() after enable pm_runtime, our resume method might be called. To avoid problems, we must make sure that our dev->drvdata is set correctly before our resume method gets called. Tested-by:
-
Felipe Balbi authored
Everytime we're done using our TTY, we want the pm timer to be reinitilized. By sticking to pm_runtime_pm_autosuspend() we make sure that this will always be the case. The idea behind this patch is to make sure we will always reinitialize the pm timer so that we don't fall into a situation where pm_runtime_put() expires right away (if timer was already about to expire when we made the call to pm_runtime_put()). While suspending right away wouldn't cause any issues, reinitializing the pm timer can help us avoiding unnecessary context save & restore operations (which are somewhat expensive) if there's another read/write/set_termios request coming right after. IOW, we are trying to make sure UART is still powered up while it's still under heavy usage. Tested-by:
-
Felipe Balbi authored
since all other IRQ types now do all necessary checks inside their handlers, transmit_chars() was the only one left expecting serial_omap_irq() to check THRE for it. We can move THRE check to transmit_chars() in order to make serial_omap_irq() more uniform. Tested-by:
-
Felipe Balbi authored
receive_chars() was getting too big and too difficult to follow. By splitting it into separate RDI and RSLI handlers, we have smaller functions which are easy to understand and only touch the pieces which they need to touch. Tested-by:
-
Felipe Balbi authored
quite a few changes here, though they are pretty obvious. In summary we're making sure to detect which interrupt type we need to handle before calling the underlying interrupt handling procedure. Tested-by:
-
Felipe Balbi authored
OMAP has some extra Interrupt types which can be really useful for SW. Let's define them so we can later use those in OMAP's serial driver. Tested-by:
-
Felipe Balbi authored
The current support is known to be broken and a later patch will come re-adding it using dma engine API. Tested-by:
-
Felipe Balbi authored
The driver doesn't need to know about its platform_device. Everything the driver needs can be done through the struct device pointer. In case we need to use the OMAP-specific PM function pointers, those can make sure to find the device's platform_device pointer so they can find the struct omap_device through pdev->archdata field. Tested-by:
-
- 05 Sep, 2012 4 commits
-
-
Alan Cox authored
These were reported in bugzilla long ago with a hack patch. Now we have a proper patch for one we can do the rest. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=25102Signed-off-by:
-
Wei Yongjun authored
ops has been allocated in this function and should be freed before leaving from the error handling cases. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
-
Huang Shijie authored
In most of the time, the driver needs to check if the cts flow control is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually, which is not a grace way. So add a new wraper function to make the code tidy and clean. Signed-off-by:
-
Felipe Balbi authored
this patch is in preparation to a few other changes which will align on the prototype for function pointers passed through pdata. It also helps cleaning up the driver a little by agregating checks for pdata in a single location. Tested-by:
-
