So after clarification from qcom, it seems mdp4 and mdp5 support
*de*interlacing but not generating an interlaced signal.  Which would
explain why interlaced modes never worked properly.

So disable in the one connector which was claiming to support
interlaced.
Signed-off-by: Rob Clark <robdclark@gmail.com>

The gnome-shell wayland compositor triggers a setcrtc with an fb that is
still being rendered, triggering the call to _wait_fence_interruptable().
But a NULL timeout means "don't wait, return -EBUSY if not ready", which
in turn causes the setcrtc to fail.
Signed-off-by: Rob Clark <robdclark@gmail.com>

This patch implements the hardware accelarated cursor
support for MDP5 platforms.
Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

In the same idea mdp5_cfg was added, this change allows us to quickly
add new instances, such as apq8084's HDMI in this case.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change add the regulator/clock configuration for MDP5 v1.3.
This config is close to the one already existing for 8x74, except
that one more regulator is needed (hpd-5v-en).
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Instead of reporting BUG_ON when resources arrays are not
dimensioned correctly, this patch does a dynamic allocation of
these arrays. This is needed for the following patches that add a
regulator for a new target.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

mdp5_ctl_set_intf()'s second argument should be "int", not "enum mdp5_intf".
The passed in value is "intf", not "intf_id".
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Now that we have a helper for drm_dp_link_power_down(), use dp helpers
instead of rolling our own.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Modified the hard-coded hdmi connector/encoder implementations in msm drm
driver to support both edp and hdmi.

V1: Initial change

V2: Address Thierry's change
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change adds a new eDP connector in msm drm driver. With this
change, eDP panel can work with msm platform under drm framework.

v1: Initial change

v2: Address Rob's comments
    Use generated header file for register definitions
    Change to devm_* APIs

v3: Address Thierry's comments and rebase on top of atomic changes
    Remove edp_bridge_mode_fixup
    Remove backlight control code and rely on pwm-backlight
    Remove continuous splash screen support for now
    Change to gpiod_* APIs

v4: Fix kbuild test issue
Signed-off-by: Hai Li <hali@codeaurora.org>
[robclark: v5: rebase on drm_bridge changes in drm-next]
Signed-off-by: Rob Clark <robdclark@gmail.com>

The patch add support for YUV frame format
for MDP4 platform.
Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change adds the NV12 format support for public planes.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Both MDP4 and MDP5 share some code as far as YUV support is
concerned. This change adds this information and will be followed
by the actual MDP4 and MDP5 YUV support patches.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Resync from rnndb database, to pull in register defines for:
 * eDP
 * HDMI/HDCP
 * mdp4/mdp5 YUV support
 * mdp5 hw cursor support
Signed-off-by: Rob Clark <robdclark@gmail.com>

On !SMP systems spinlocks do not exist. Thus checking of they
are active will always fail.

Use
  assert_spin_locked(lock);
instead of
  BUG_ON(!spin_is_locked(lock));
to not BUG() on all UP systems.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
[robclark: drop stray ')']
Signed-off-by: Rob Clark <robdclark@gmail.com>

3d3f8b1f ("drm/bridge: make bridge registration independent of drm
flow") resulted that the hdmi bridge object would be leaked at teardown.
Just switch over to devm_kzalloc() as the easy way to solve this.
Signed-off-by: Rob Clark <robdclark@gmail.com>

As a result of atomic DPMS support, the various prepare/commit hooks get
called in a way that msm dislikes.  We were expecting prepare/commit to
bracket a modeset, which is no longer the case.  This was needed to hold
various extra clk's (such as interface clks) on while we are touching
registers, and in the case of mdp4 holding vblank enabled.

The most straightforward way to deal with this, since we already have
our own atomic_commit(), is to just handle prepare/commit internally to
the driver (with some additional vfuncs for mdp4 vs mdp5), and switch
everything over to instead use the new enable/disable hooks.  It doesn't
really change too much, despite the code motion.  What used to be in the
encoder/crtc dpms() fxns is split out into enable/disable.

We should be able to drop our own enable-state tracking, as the atomic
helpers should do this for us.  But keeping that for the short term for
extra debugging as atomic stablizes.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Only the legacy helpers use these entry points.  Don't populate them
with transitional helpers, since that just makes things more confusing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[robclark: reword commit msg]
Signed-off-by: Rob Clark <robdclark@gmail.com>

We had _power_up(), but drivers also need to be able to power down.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The atmel-hlcdc driver selects DRM_GEM_CMA_HELPER which makes use of
symbols only available when HAVE_DMA_ATTRS is selected.
Add a dependency on the ARM architecture which select this option.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The msm gpu drivers depend on both the DT mechanism and the
common clk handling code, if they are not enabled, we get
a number of build errors:

In file included from drivers/gpu/drm/msm/hdmi/hdmi.h:27:0,
                 from drivers/gpu/drm/msm/hdmi/hdmi_bridge.c:18:
drivers/gpu/drm/msm/msm_drv.h:45:24: fatal error: mach/board.h: No such file or directory
 #include <mach/board.h>
                        ^

drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c:503:2: error: implicit declaration of function 'devm_clk_register' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

When page flipping, we need to mark the new fb as active and unmark the active
flag for the old fb (if different).
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The shmobile drm driver selects BACKLIGHT_CLASS_DEVICE
as of 0a5a5499 "drm: shmobile: Add dependency on
BACKLIGHT_CLASS_DEVICE", but that option in turn depends
on BACKLIGHT_LCD_SUPPORT, so we actually have to select
both, or alternatively use 'depends on BACKLIGHT_CLASS_DEVICE'.

Further, the driver uses FB_SH_MOBILE_MERAM if that is
enabled, but this breaks if MERAM is a module while
the DRM driver is built-in. To solve this, add a dependency
on "FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM", which forces
DRM_SHMOBILE to be a module if FB_SH_MOBILE_MERAM set to 'm'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The newly added sti driver requires the drm_panel helpers,
and we get a link error if they are not enabled

ERROR: "drm_panel_attach" [drivers/gpu/drm/sti/stidvo.ko] undefined!
ERROR: "of_drm_find_panel" [drivers/gpu/drm/sti/stidvo.ko] undefined!

This adds a 'select' statement as we have for the other drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

When the reset controller subsystem is disabled, this driver
fails to build:

drivers/gpu/drm/rockchip/rockchip_drm_vop.c: In function 'vop_initial':
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1267:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]

The easiest solution is to add a dependency in Kconfig to avoid
that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The simple panel code uses the backlight interface to
find a device, which fails when backlight is disabled:

drivers/built-in.o: In function `panel_simple_platform_probe':
:(.text+0xd3c48): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The sharp panel code uses the backlight interface to
find a device, which fails when backlight is disabled:

drivers/built-in.o: In function `sharp_panel_probe':
:(.text+0x5ceac): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The run-length encoding algorithm should compare 16-bit encoded pixel
values instead of comparing raw pixel values. It allows pixels
with similar but different colors to be encoded as repeat pixels, and
thus potentially save USB bandwidth.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Haixia Shi <hshi@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Change agp_free_page_array to use kvfree function,
remove the duplicated code.
Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
	drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
	drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h

drm/panel: Changes for v3.20-rc1

This contains the long-awaited drm_bridge series that makes Chromebooks
work for people. I had thought this would've been perfect by now, but
then I go and build test it and the first thing it does is yell about a
recursive dependency. I fixed that up because I was feeling bad for not
getting around to look at this earlier.

Biseds that there is new support for two more panels, a couple of fixup
patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a
potential NULL pointer dereference fix.

* tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (23 commits)
  drm/bridge: dw-hdmi: Adapt to bridge API change
  drm/sti: fixup for bridge interface
  drm/bridge: dw-hdmi: Fix return error path
  drm: Check the right variable when setting formats
  Documentation: bridge: Add documentation for ps8622 DT properties
  Documentation: devicetree: Add vendor prefix for parade
  Documentation: drm: bridge: move to video/bridge
  drm/bridge: ptn3460: use gpiod interface
  drm/bridge: ptn3460: probe connector at the end of bridge attach
  drm/bridge: ptn3460: support drm_panel
  drm/exynos: dp: support drm_bridge
  drm/bridge: ptn3460: Convert to I2C driver model
  drm/bridge: make bridge registration independent of drm flow
  drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init
  drm/bridge: ptn3460: Few trivial cleanups
  drm/panel: simple: Add AVIC TM070DDH03 panel support
  of: Add vendor prefix for Shanghai AVIC Optoelectronics Co., Ltd.
  drm/panel: sharp: lq101r1sx01: Remove unneeded include
  drm/panel: sharp: lq101r1sx01: Respect power timings
  drm/panel: sharp: lq101r1sx01: Add delay after display on
  ...

Commit fbc4572e9c48e45b ("drm/bridge: make bridge registration independent of
drm flow") introduced some drm/bridge API modifications. Make the necessary
changes so that we can avoid the build breakage:

drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_bridge_destroy':
drivers/gpu/drm/bridge/dw_hdmi.c:1378:2: error: implicit declaration of function 'drm_bridge_cleanup' [-Werror=implicit-function-declaration]
drivers/gpu/drm/bridge/dw_hdmi.c: At top level:
drivers/gpu/drm/bridge/dw_hdmi.c:1471:2: error: unknown field 'destroy' specified in initializer
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_register':
drivers/gpu/drm/bridge/dw_hdmi.c:1535:2: error: implicit declaration of function 'drm_bridge_init' [-Werror=implicit-function-declaration]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

So sti doesn't build because the bridge interfaces changes didn't
catch up to its new DVO driver.

Now I might just carry this patch, but I might just push the
bridge pull into a side-pull until someone resolves it.

So this might not be the right solution to the problem, so
please figure it out and let me know ASAP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If devm_request_threaded_irq() fails we should jump to 'err_iahb' label that
will disable the clocks that were previously enabled.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When setting the video bus supported formats for a display device using
drm_display_info_set_bus_formats(), check for the proper variable after
duplicating memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add documentation for DT properties supported by ps8622/ps8625
eDP-LVDS converter.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

ps8622 eDP-LVDS converter bridge chip is from parade technologies
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move drm/bridge documentation to video/bridge.
Also, add proper documentation for gpios used by ptn3460.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify driver to support gpiod interface.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Force bridge connector detection at the end of the bridge attach.
This is needed to detect the bridge connector early.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>