This version brings along following fixes:

- Organize FPU associated code to DML
- Modify SMU_TIMEOUT macro
- Organize dcn201 code
- Address DS stays disabled problem under specific scenario
- Fix black screen issue
- Update DML to rev.99
- Address problem of eDP hot-plug feature
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL
when plug-out and back to eDP when plug-in. OS will still setPathMode
with same timing for each plugging, but eDP gets no stream update as we
don't check signal type changing back as keeping it VIRTUAL. It's also
unsafe for future cases that stream signal is switched with same timing.

[How]
Check stream signal type change include previous HDMI signal case.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
1. update dml to rev.99
2. add smu clk table w/a: smu gives 1 dtm level with mismatch votage
   table which causes multiple issues.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
With some monitors when multi plane overlay is enabled the memory
clock switching mechanism has to change and, due to an error in the
initialization sequence, it may cause a black screen.

[HOW]
Change the firmware assisted memory clock switch initialization and
tear-down sequence utilizing the prepare_bandwidth and
optimize_bandwidth contexts.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Felipe Clark <feclark@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
On HG APU + dGPU scenario with no display to dGPU,
DS stays disabled due to no display present.
This problem can be worked around by DAL calling
DCEFCLK DS message to SMU on clk init.

[How]
Call DCEFCLK DS message to SMU on clk init.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
If some SMU features are not enabled, SMU will return fail to that
message.

[HOW]
SMU_TIMEOUT macro will treat "return fail" as timeout also.
Correct the macro to only report timeout case.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN302 to DML, where all FPU code
should locate.
Co-authored-by: Jasdeep Dhillon <jdhillon@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This version brings improvements in the following:

- Drop unnecessary DCN guards
- Improve Z9 interface
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Need to disable Z9 on configurations that only support Z10

[How]
Support new PMFW interface to disable Z9
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Might potentially have truncation problem with the implicit casting
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
- We only ever want seamless boots on eDPs
- The naming and logic did not match the context

[HOW]
- Removed unnecessary if statements
- Renamed power_down_display_on_boot to seamless_boot_edp_requested and
swapped the logic
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jarif Aftab <jaraftab@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The return value was never initialized so the cleanup code executed when
it isn't even necessary.

Just add proper error handling.

Fixes: ab50cb9d ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable power level, power limit and fan speed
information retrieval in one VF mode.
This is required so that tool ROCM-SMI
can provide this information to users.
Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This fixes 892deb48 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange").
we should read pf2vf data based at mman.fw_vram_usage_va after gmc
sw_init. commit 892deb48 breaks this logic.

[How]
calling amdgpu_virt_exchange_data in amdgpu_virt_init_data_exchange to
set the right base in the right sequence.

v2:
call amdgpu_virt_init_data_exchange after gmc sw_init to make data
exchange workqueue run

v3:
clean up the code logic

v4:
add some comment and make the code more readable

Fixes: 892deb48 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange")
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the code style warnings in hdp xgmi mca and umc:
1. WARNING: missing space after struct definition.
2. WARNING: please, no space before tabs.
3. WARNING: line length of xxx exceeds 100 columns.
4. ERROR: "foo* bar" should be "foo *bar".
5. ERROR: space required before the open parenthesis '('.
6. ERROR: space prohibited after that open parenthesis '('.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in sdma:
1. WARNING: Missing a blank line after declarations.
2. ERROR: that open brace { should be on the previous line.
3. WARNING: unnecessary whitespace before a quoted newline.
4. ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in gmc:
ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in gfx:
1. WARNING: suspect code indent for conditional statements.
2. ERROR: spaces required around that '=' (ctx:WxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in amdgpu_ras:
1. ERROR: space required before the open parenthesis '('.
2. WARNING: line length of xxx exceeds 100 columns.
3. ERROR: "foo* bar" should be "foo *bar".
4. WARNING: unnecessary whitespace before a quoted newline.
5. WARNING: space prohibited before semicolon.
6. WARNING: suspect code indent for conditional statements.
7. WARNING: braces {} are not necessary for single statement blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is a following patch to apply the workaround only on
those boards with a bad harvest table in ip discovery.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Early check in amdgpu_discovery_reg_base_init promises this.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Changed from v1:
    remove unused brace
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

support ECC TABLE message, this table include umc ras error count
and error address

V2:
	Return after smu version check fail

V3:
	Return -EOPNOTSUPP, if fail to get smc ver.

V4:
	ECCTABLE typo corrected and sentence rephrased.
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add smu message query error information interface,

function name align with IP version number

V2:
	Removed unused err cnt entry
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update smu driver if version to 0x40

V2:
	Interface version append with sienna_cichlid
V3:
	Aligned with latest driver interface.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The WA from commit 2a50edbf ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc74 ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops.  Pull the workarounds out to
avoid that s0ix regression in the common case.  This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.

Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: Scott Bruce <smbruce@gmail.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc74 ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.

Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.

The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")
Signed-off-by: Lukas Fink <lukas.fink1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It can cause a hang.  This is normally not enabled for GPU
hangs on these asics, but was recently enabled for handling
aborted suspends.  This causes hangs on some platforms
on suspend.

Fixes: daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1858Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rather than opting into GPU recovery support, default to on, and
opt out if it's not working on a particular GPU.  This avoids the
need to add new asics to this list since this is a core feature.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add yellow carp to devices which support recovery
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dpg_width is being initialized to width but this is never read
as dpg_width is overwritten later on. Remove the redundant
initialization.

Cleans up the following clang-analyzer warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:6020:8:
warning: Value stored to 'dpg_width' during its initialization is never
read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arraysReported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

check null ptr first before access its element

v2: check adev->pm.dpm_enabled early in amdgpu_debugfs_pm_init()
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix compile warning for ras_block_match_default
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use ARRAY_SIZE to get array length.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Eliminate the follow smatch warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3504 amdgpu_device_init()
warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1716
amdgpu_ras_error_status_query() warn: if statement not indented
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1058 amdgpu_ras_error_inject()
warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2725:16-17: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No longer insert ras blocks into ras_list if it already exists in ras_list.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>