- 07 Dec, 2015 18 commits
-
-
Jiri Benc authored
When looking for outer IP header, use the actual socket address family, not the address family of the default destination which is not set for metadata based interfaces (and doesn't have to match the address family of the received packet even if it was set). Fix also the misleading comment. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - prevent compatibility issue between DAT and speedy join from creating inconsistencies in the global translation table - make sure temporary TT entries are purged out if not claimed - fix comparison function used for TT hash table - fix invalid stack access in batadv_dat_select_candidates() ==================== Signed-off-by: -
Robert Shearman authored
Locally generated IPv4 and (probably) IPv6 packets are dropped because skb->protocol isn't set. We could write wrappers to lwtunnel_output for IPv4 and IPv6 that set the protocol accordingly and then call lwtunnel_output, but mpls_output relies on the AF-specific type of dst anyway to get the via address. Therefore, make use of dst->dst_ops->family in mpls_output to determine the type of nexthop and thus protocol of the packet instead of checking skb->protocol. Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry") Reported-by:
Sam Russell <sam.h.russell@gmail.com> Signed-off-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== vxlan: IPv6 fill_metadata_dst support This adds IPv6 support to ndo_fill_metadata_dst in vxlan. The IPv4 part needs some restructuring to avoid duplicate code, this will be sent as a separate patch targeting net-next. ==================== Signed-off-by: -
Jiri Benc authored
Fill the metadata correctly even when tunneling over IPv6. Also, check that the provided metadata is of an address family that is supported by the tunnel. Signed-off-by:
-
Jiri Benc authored
Will be used also for ndo_fill_metadata_dst. Signed-off-by:
-
David S. Miller authored
Manish Chopra says: ==================== qed: Bug fixes Please consider applying this series to net. V2: - Use available helpers for declaring bitmap and bitmap operations. ==================== Signed-off-by: -
Sudarsana Kalluru authored
When using INTa, ISR might be called before device is configured for INTa [E.g., due to other device asserting the shared interrupt line], in which case the ISR would read the SISR registers that shouldn't be read unless HW is already configured for INTa. This might break interrupts later on. There's also an MSI-X issue due to this difference, although it's mostly theoretical. This patch changes the initialization order, calling request_irq() for the slowpath interrupt only after the chip is configured for working in the preferred interrupt mode. Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Ariel Elior authored
Can't rely on pci config space to discover bar size, as in some environments this returns a wrong, too large value. Instead, rely on device register, which contains the value provided by MFW at preboot. Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Tomer Tayar authored
Concurrent non-blocking slowpath ramrods can be completed out-of-order on the completion chain. Recycling completed elements, while previously sent elements are still completion pending, can lead to overriding of active elements on the chain. Furthermore, sending pending slowpath ramrods currently lacks the update of the chain element physical pointer. This patch: * Ensures that ramrods are sent to the FW with consecutive echo values. * Handles out-of-order completions by freeing only first successive completed entries. * Updates the chain element physical pointer when copying a pending element into a free element for sending. Signed-off-by:
Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by:
-
Tomer Tayar authored
The amount of chain next pointer elements between the producer and the consumer indices depends on which pages they currently point to. The current calculation is based only on their difference, and it can lead to a number of free elements which is higher by 1 than the actual value. Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_map_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Sven Eckelmann authored
batadv_dat_select_candidates provides an u32 to batadv_hash_dat but it needs a batadv_dat_entry with at least ip and vid filled in. Fixes: 3e26722bc9f2 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by:Sven Eckelmann <sven@open-mesh.com> Acked-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
-
Marek Lindner authored
The translation table implementation, namely batadv_compare_tt(), is used to compare two client entries and deciding if they are the holding the same information. Each client entry is identified by its mac address and its VLAN id (VID). Consequently, batadv_compare_tt() has to not only compare the mac addresses but also the VIDs. Without this fix adding a new client entry that possesses the same mac address as another client but operates on a different VID will fail because both client entries will considered identical. Signed-off-by:
-
Simon Wunderlich authored
In the case when a temporary entry is added first and a proper tt entry is added after that, the temporary tt entry is kept in the orig list. However the temporary flag is removed at this point, and therefore the purge function can not find this temporary entry anymore. Therefore, remove the previous temp entry before adding the new proper one. This case can happen if a client behind a given originator moves before the TT announcement is sent out. Other than that, this case can also be created by bogus or malicious payload frames for VLANs which are not existent on the sending originator. Reported-by:
Alessandro Bolletta <alessandro@mediaspot.net> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Acked-by:
-
Simon Wunderlich authored
DAT Cache replies are answered on behalf of other clients which are not connected to the answering originator. Therefore, we shouldn't add these clients to the answering originators TT table through speed join to avoid bogus entries. Reported-by:
-
Felix Fietkau authored
This semicolon causes a build error if the function call is wrapped in parentheses. Fixes: aabc92bb ("net: add __netdev_alloc_pcpu_stats() to indicate gfp flags") Reported-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
lucien authored
when A sends a data to B, then A close() and enter into SHUTDOWN_PENDING state, if B neither claim his rwnd is 0 nor send SACK for this data, A will keep retransmitting this data until t5 timeout, Max.Retrans times can't work anymore, which is bad. if B's rwnd is not 0, it should send abort after Max.Retrans times, only when B's rwnd == 0 and A's retransmitting beyonds Max.Retrans times, A will start t5 timer, which is also commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") means, but it lacks the condition peer rwnd == 0. so fix it by adding a bit (zero_window_announced) in peer to record if the last rwnd is 0. If it was, zero_window_announced will be set. and use this bit to decide if start t5 timer when local.state is SHUTDOWN_PENDING. Fixes: commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 06 Dec, 2015 10 commits
-
-
lucien authored
If the chunks are enqueued successfully but sctp_cmd_interpreter() return err to sctp_sendmsg() (mainly because of no mem), the chunks will get re-queued, but we are dropping the reference and freeing them. The fix is to just drop the reference on the datamsg just as it had succeeded, as: - if the chunks weren't queued, this is enough to get them freed. - if they were queued, they will get freed when they finally get out or discarded. Signed-off-by:
-
lucien authored
When a msg is sent, sctp will hold the chunks of this msg and then try to enqueue them. But if the chunks are not enqueued in sctp_outq_tail() because of the invalid state, sctp_cmd_interpreter() may still return success to sctp_sendmsg() after calling sctp_outq_flush(), these chunks will become orphans and will leak. So we fix them by moving sctp_chunk_hold() to sctp_outq_tail(), where we are sure that the chunk is going to get queued. Signed-off-by:
-
Stefan Wahren authored
In case of a tx queue timeout every transmit is blocked until the QCA7000 resets himself and triggers a sync which makes the driver flushs the tx ring. So avoid this blocking situation by triggering the sync immediately after the timeout. Waking the queue doesn't make sense in this situation. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
-
Bjørn Mork authored
The Huawei E3372 (12d1:157d) needs this quirk in MBIM mode as well. Allow this by forcing the NTB to contain only a single NDP, and add a device specific entry for this ID. Due to the way Huawei use device IDs, this might be applied to other modems as well. It is assumed that those modems will be based on the same firmware and will need this quirk too. If not, it will still not harm normal usage, although multiplexing performance could be impacted. Cc: Enrico Mioso <mrkiko.rs@gmail.com> Reported-by:
Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-By:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
David S. Miller authored
This reverts commit d3716f18. vmalloc cannot be used in BH disabled contexts, even with GFP_ATOMIC. And we certainly want to support rhashtable users inserting entries with software interrupts disabled. Signed-off-by:
-
Sergei Shtylyov authored
Add myself as a reviewer for the Renesas Ethernet drivers -- hopefully I won't miss the buggy patches anymore. :-) Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: packet timestamp fixes These a couple of fixes regarding sctp/packet timestamps. Dmitry Vyukov <dvyukov@google.com> reported the counter leak on missing net_enable_timestamp() (2nd patch) and further testing here revealed the other two issues. Please consider these to -stable. ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
As we are keeping timestamps on when copying the socket, we also have to copy sk_tsflags. This is needed since b9f40e21 ("net-timestamp: move timestamp flags out of sk_flags"). Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for detecting stale cookies. This cookie is echoed back to the server by the client and then that timestamp is checked. Thing is, if the listening socket is using packet timestamping, the cookie is encoded with ktime_get() value and checked against ktime_get_real(), as done by __net_timestamp(). The fix is to sctp also use ktime_get_real(), so we can compare bananas with bananas later no matter if packet timestamping was enabled or not. Fixes: 52db882f ("net: sctp: migrate cookie life from timeval to ktime") Signed-off-by:
-
- 05 Dec, 2015 6 commits
-
-
Jiri Benc authored
Commit 3511494c ("vxlan: Group Policy extension") changed definition of VXLAN_HF_RCO from 0x00200000 to BIT(24). This is obviously incorrect. It's also in violation with the RFC draft. Fixes: 3511494c ("vxlan: Group Policy extension") Cc: Thomas Graf <tgraf@suug.ch> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Bjørn Mork authored
Commit 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") failed to update the setting of the IFA_F_OPTIMISTIC flag, causing the IFA_F_STABLE_PRIVACY flag to be lost if IFA_F_OPTIMISTIC is set. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Giuseppe CAVALLARO authored
There is a memleak when suspend/resume this driver version. Currently the stmmac, during resume step, reallocates all the resources but they are not released when suspend. The patch is not to release these resources but the logic has been changed. In fact, it is not necessary to free and reallocate all from scratch because the memory data will be always preserved. As final solution, the patch just reinit the descriptors and the rx/tx pointers only when resume. Tested done on STi boxes. Reported-by:
ZhengShunQian <zhengsq@rock-chips.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sergei Shtylyov authored
The Rx queue #1 frame error counter name contains trailing underscore, probably due to a typo... Signed-off-by:
-
Sergei Shtylyov authored
In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by:
Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-12-03 This series contains updates to ixgbe, i40e/i40evf, MAINTAINERS and e100.txt Alex provides a fix for ixgbe where enabling SR-IOV and then bringing the interface up was resulting in the PF MAC addresses getting into a bad state. The workaround for this issue is to bring up the interface first and then enable SR-IOV as this will trigger the reset in the existing code. I clean up legacy license stuff in the e100.txt documentation and then update the maintainers/reviewers list for our drivers. Jesse fixes an issue with the i40e/i40evf drivers, where if the driver were to happen to have a mutex held while the i40e_init_adminq() call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantices. ==================== Signed-off-by:
-
- 04 Dec, 2015 6 commits
-
-
Pavel Machek authored
atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Herbert Xu authored
When an rhashtable user pounds rhashtable hard with back-to-back insertions we may end up growing the table in GFP_ATOMIC context. Unfortunately when the table reaches a certain size this often fails because we don't have enough physically contiguous pages to hold the new table. Eric Dumazet suggested (and in fact wrote this patch) using __vmalloc instead which can be used in GFP_ATOMIC context. Reported-by:
Phil Sutter <phil@nwl.cc> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nicolas Dichtel authored
Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Guillaume Nault authored
pppoe_connect() mustn't touch the padt_work field of pppoe sockets because that work could be already pending. [ 21.473147] BUG: unable to handle kernel NULL pointer dereference at 00000004 [ 21.474523] IP: [<c1043177>] process_one_work+0x29/0x31c [ 21.475164] *pde = 00000000 [ 21.475513] Oops: 0000 [#1] SMP [ 21.475910] Modules linked in: pppoe pppox ppp_generic slhc crc32c_intel aesni_intel virtio_net xts aes_i586 lrw gf128mul ablk_helper cryptd evdev acpi_cpufreq processor serio_raw button ext4 crc16 mbcache jbd2 virtio_blk virtio_pci virtio_ring virtio [ 21.476168] CPU: 2 PID: 164 Comm: kworker/2:2 Not tainted 4.4.0-rc1 #1 [ 21.476168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 21.476168] task: f5f83c00 ti: f5e28000 task.ti: f5e28000 [ 21.476168] EIP: 0060:[<c1043177>] EFLAGS: 00010046 CPU: 2 [ 21.476168] EIP is at process_one_work+0x29/0x31c [ 21.484082] EAX: 00000000 EBX: f678b2a0 ECX: 00000004 EDX: 00000000 [ 21.484082] ESI: f6c69940 EDI: f5e29ef0 EBP: f5e29f0c ESP: f5e29edc [ 21.484082] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 21.484082] CR0: 80050033 CR2: 000000a4 CR3: 317ad000 CR4: 00040690 [ 21.484082] Stack: [ 21.484082] 00000000 f6c69950 00000000 f6c69940 c0042338 f5e29f0c c1327945 00000000 [ 21.484082] 00000008 f678b2a0 f6c69940 f678b2b8 f5e29f30 c1043984 f5f83c00 f6c69970 [ 21.484082] f678b2a0 c10437d3 f6775e80 f678b2a0 c10437d3 f5e29fac c1047059 f5e29f74 [ 21.484082] Call Trace: [ 21.484082] [<c1327945>] ? _raw_spin_lock_irq+0x28/0x30 [ 21.484082] [<c1043984>] worker_thread+0x1b1/0x244 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c1047059>] kthread+0x8f/0x94 [ 21.484082] [<c1327a32>] ? _raw_spin_unlock_irq+0x22/0x26 [ 21.484082] [<c1327ee9>] ret_from_kernel_thread+0x21/0x38 [ 21.484082] [<c1046fca>] ? kthread_parkme+0x19/0x19 [ 21.496082] Code: 5d c3 55 89 e5 57 56 53 89 c3 83 ec 24 89 d0 89 55 e0 8d 7d e4 e8 6c d8 ff ff b9 04 00 00 00 89 45 d8 8b 43 24 89 45 dc 8b 45 d8 <8b> 40 04 8b 80 e0 00 00 00 c1 e8 05 24 01 88 45 d7 8b 45 e0 8d [ 21.496082] EIP: [<c1043177>] process_one_work+0x29/0x31c SS:ESP 0068:f5e29edc [ 21.496082] CR2: 0000000000000004 [ 21.496082] ---[ end trace e362cc9cf10dae89 ]--- Reported-by:
Andrew <nitr0@seti.kr.ua> Fixes: 287f3a94 ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
David S. Miller authored
Marcin Wojtas says: ==================== Marvell Armada 375 mvpp2 fixes During my work on mvneta driver I revised mvpp2, and it occurred that the initial version of Marvell Armada 375 SoC comprised bugs around DMA-unmapping in both ingress and egress paths - not all buffers were umapped in TX path and none(!) in RX. Three patches that I send fix this situation. Any feedback would be welcome. ==================== Signed-off-by: -
Marcin Wojtas authored
In hitherto code in case of RX buffer allocation error during refill, original buffer is pushed to the network stack, but the amount of available buffer pointers in BM pool is decreased. This commit fixes the situation by moving refill call before skb_put(), and returning original buffer pointer to the pool in case of an error. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
