- 27 Nov, 2014 7 commits
-
-
Alex Deucher authored
commit 0b021c58 upstream. Use gart rather than vram to avoid having to deal with the HDP cache. Port of adfed2b0 (drm/radeon: use gart memory for DMA ring tests) to the IB tests. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Alex Deucher authored
commit 8efe82ca upstream. The power management code calls into the display code for certain things. If certain power management sysfs attributes are called before the driver has finished initializing all of the hardware we can run into problems with uninitialized modesetting state. Add a check to make sure modesetting init has completed to the bandwidth update callbacks to fix this. Can be triggered by the tlp and laptop start up scripts depending on the timing. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=83611 https://bugs.freedesktop.org/show_bug.cgi?id=85771Signed-off-by:
-
Jammy Zhou authored
commit dc4edad6 upstream. CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK Ported from amdgpu driver. Signed-off-by:
Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by:
-
Takashi Iwai authored
commit e4742b1e upstream. The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748Reported-and-tested-by:
Joschi Brauchle <joschibrauchle@gmx.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Rodrigo Vivi authored
commit d6a8b72e upstream. Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000; So the only way to avoid screen corruptions is setting PAT 0 to Uncached. MOCS can still be used though. But if userspace is trusting PTE for cache selection the safest thing to do is to let caches disabled. BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry, so RTL will always use the value corresponding to pat_sel = 000" - System agent ggtt writes (i.e. cpu gtt mmaps) already work before this patch, i.e. the same uncached + snooping access like on gen6/7 seems to be in effect. - So this just fixes blitter/render access. Again it looks like it's not just uncached access, but uncached + snooping. So we can still hold onto all our assumptions wrt cpu clflushing on LLC machines. v2: Cleaner patch as suggested by Chris. v3: Add Daniel's comment Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: James Ausmus <james.ausmus@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Greg Kurz authored
commit 24c65bc7 upstream. The add_early_randomness() function in drivers/char/hw_random/core.c passes a 16-byte buffer to pseries_rng_data_read(). Unfortunately, plpar_hcall() returns four 64-bit values and trashes 16 bytes on the stack. This bug has been lying around for a long time. It got unveiled by: commit d3cc7996 Author: Amit Shah <amit.shah@redhat.com> Date: Thu Jul 10 15:42:34 2014 +0530 hwrng: fetch randomness only after device init It may trig a oops while loading or unloading the pseries-rng module for both PowerVM and PowerKVM guests. This patch does two things: - pass an intermediate well sized buffer to plpar_hcall(). This is acceptalbe since we're not on a hot path. - move to the new read API so that we know the return buffer size for sure. Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Cristian Stoica authored
commit 738459e3 upstream. If dma mapping for dma_addr_out fails, the descriptor memory is freed but the previous dma mapping for dma_addr_in remains. This patch resolves the missing dma unmap and groups resource allocations at function start. Signed-off-by:
Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by:
-
- 20 Nov, 2014 25 commits
-
-
Nadav Amit authored
commit d29b9d7e upstream. The emulator could reuse an op->type from a previous instruction for some immediate values. If it mistakenly considers the operands as memory operands, it will performs a memory read and overwrite op->val. Consider for instance the ROR instruction - src2 (the number of times) would be read from memory instead of being used as immediate. Mark every immediate operand as such to avoid this problem. Fixes: c44b4c6aSigned-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit c822ed96 upstream. Avoids normal IO racing with discard. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Herbert Xu authored
commit 3ce9b20f upstream. When VLAN is in use in macvtap_put_user, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN tags are detected. Fixes: f09e2249 ("macvtap: restore vlan header on user read") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Herbert Xu authored
commit a8f9bfdf upstream. When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68 ("tuntap: hardware vlan tx support") Signed-off-by:
-
Emmanuel Grumbach authored
commit 31b8b343 upstream. If the RFkill interrupt fires while we calibrate, it would make the firmware fail and the driver wasn't able to recover. Change the flow so that the driver will kill the firmware in that case. Since we have now two flows that are calling trans_stop_device (the RFkill interrupt and the op_mode_mvm_start function) - we need to better sync this. Use the STATUS_DEVICE_ENABLED in the pcie transport in an atomic way to achieve this. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> [ luis: used Emmanuel's backport to 3.17 ] Signed-off-by:
-
Johannes Berg authored
commit b8fff407 upstream. Upon receiving the last fragment, all but the first fragment are freed, but the multicast check for statistics at the end of the function refers to the current skb (the last fragment) causing a use-after-free bug. Since multicast frames cannot be fragmented and we check for this early in the function, just modify that check to also do the accounting to fix the issue. Reported-by:
Yosef Khyal <yosefx.khyal@intel.com> Signed-off-by:
-
Andrew Lunn authored
commit 5129ee22 upstream. A second product has come to light which makes use of the A0 stepping of the Armada XP SoC. A0 stepping has a hardware bug in the i2c core meaning that hardware offload does not work, resulting in the kernel failing to boot. The quirk detects that the kernel is running on an A0 stepping SoC and disables the use of hardware offload. Currently the quirk is only enabled for PlatHome Openblocks AX3. The AX3 has been produced with both A0 and B0 stepping SoCs. The second product is the Lenovo Iomega IX4-300d. It seems likely that this device will also swap from A0 to B0 SoC sometime during its life. If there are two products using A0, it seems likely there are more products with A0. Also, since the number of A0 SoCs is limited, these products are also likely to transition to B0. Hence detecting at run time is the safest option. So enable the quirk for all Armada XP boards. Tested on an AX3 with A0 stepping. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 930ab3d4: ("i2c: mv64xxx: Add I2C Transaction Generator support") Link: https://lkml.kernel.org/r/1406395238-29758-2-git-send-email-andrew@lunn.chSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Junjie Mao authored
commit e6023367 upstream. When choosing a random address, the current implementation does not take into account the reversed space for .bss and .brk sections. Thus the relocated kernel may overlap other components in memory. Here is an example of the overlap from a x86_64 kernel in qemu (the ranges of physical addresses are presented): Physical Address 0x0fe00000 --+--------------------+ <-- randomized base / | relocated kernel | vmlinux.bin | (from vmlinux.bin) | 0x1336d000 (an ELF file) +--------------------+-- \ | | \ 0x1376d870 --+--------------------+ | | relocs table | | 0x13c1c2a8 +--------------------+ .bss and .brk | | | 0x13ce6000 +--------------------+ | | | / 0x13f77000 | initrd |-- | | 0x13fef374 +--------------------+ The initrd image will then be overwritten by the memset during early initialization: [ 1.655204] Unpacking initramfs... [ 1.662831] Initramfs unpacking failed: junk in compressed archive This patch prevents the above situation by requiring a larger space when looking for a random kernel base, so that existing logic can effectively avoids the overlap. [kees: switched to perl to avoid hex translation pain in mawk vs gawk] [kees: calculated overlap without relocs table] Fixes: 82fa9637 ("x86, kaslr: Select random position from e820 maps") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1414762838-13067-1-git-send-email-eternal.n08@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Borislav Petkov authored
commit 4750a0d1 upstream. Konrad triggered the following splat below in a 32-bit guest on an AMD box. As it turns out, in save_microcode_in_initrd_amd() we're using the *physical* address of the container *after* we have enabled paging and thus we #PF in load_microcode_amd() when trying to access the microcode container in the ramdisk range. Because the ramdisk is exactly there: [ 0.000000] RAMDISK: [mem 0x35e04000-0x36ef9fff] and we fault at 0x35e04304. And since this guest doesn't relocate the ramdisk, we don't do the computation which will give us the correct virtual address and we end up with the PA. So, we should actually be using virtual addresses on 32-bit too by the time we're freeing the initrd. Do that then! Unpacking initramfs... BUG: unable to handle kernel paging request at 35d4e304 IP: [<c042e905>] load_microcode_amd+0x25/0x4a0 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.1-302.fc21.i686 #1 Hardware name: Xen HVM domU, BIOS 4.4.1 10/01/2014 task: f5098000 ti: f50d0000 task.ti: f50d0000 EIP: 0060:[<c042e905>] EFLAGS: 00010246 CPU: 0 EIP is at load_microcode_amd+0x25/0x4a0 EAX: 00000000 EBX: f6e9ec4c ECX: 00001ec4 EDX: 00000000 ESI: f5d4e000 EDI: 35d4e2fc EBP: f50d1ed0 ESP: f50d1e94 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 35d4e304 CR3: 00e33000 CR4: 000406d0 Stack: 00000000 00000000 f50d1ebc f50d1ec4 f5d4e000 c0d7735a f50d1ed0 15a3d17f f50d1ec4 00600f20 00001ec4 bfb83203 f6e9ec4c f5d4e000 c0d7735a f50d1ed8 c0d80861 f50d1ee0 c0d80429 f50d1ef0 c0d889a9 f5d4e000 c0000000 f50d1f04 Call Trace: ? unpack_to_rootfs ? unpack_to_rootfs save_microcode_in_initrd_amd save_microcode_in_initrd free_initrd_mem populate_rootfs ? unpack_to_rootfs do_one_initcall ? unpack_to_rootfs ? repair_env_string ? proc_mkdir kernel_init_freeable kernel_init ret_from_kernel_thread ? rest_init Reported-and-tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> References: https://bugzilla.redhat.com/show_bug.cgi?id=1158204 Fixes: 75a1ba5b ("x86, microcode, AMD: Unify valid container checks") Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20141101100100.GA4462@pd.tnicSigned-off-by:
-
Jan Kara authored
commit ece9c72a upstream. Priority of a merged request is computed by ioprio_best(). If one of the requests has undefined priority (IOPRIO_CLASS_NONE) and another request has priority from IOPRIO_CLASS_BE, the function will return the undefined priority which is wrong. Fix the function to properly return priority of a request with the defined priority. Fixes: d58cdfb8Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 897f1acb upstream. Add a space between subj= and feature= fields to make them parsable. Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit 46238845 upstream. When an interface is deleted, an ongoing hardware scan is canceled and the driver must abort the scan, at the very least reporting completion while the interface is removed. However, if it scheduled the work that might only run after everything is said and done, which leads to cfg80211 warning that the scan isn't reported as finished yet; this is no fault of the driver, it already did, but mac80211 hasn't processed it. To fix this situation, flush the delayed work when the interface being removed is the one that was executing the scan. Reported-by:
Sujith Manoharan <sujith@msujith.org> Tested-by:
-
Luciano Coelho authored
commit ff1e417c upstream. Due to the time it takes to process the beacon that started the CSA process, we may be late for the switch if we try to reach exactly beacon 0. To avoid that, use count - 1 when calculating the switch time. Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
Luciano Coelho authored
commit 84469a45 upstream. If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Reported-by:
-
Krzysztof Kozlowski authored
commit cdaf3e15 upstream. The charger manager obtained in probe references to power supplies for all chargers with power_supply_get_by_name() for later usage. However if such charger driver was removed then this reference would point to old power supply (from driver which was removed). This lead to accessing invalid memory which could be observed with: $ echo "max77693-charger" > /sys/bus/platform/drivers/max77693-charger/unbind $ grep . /sys/devices/virtual/power_supply/battery/charger.0/* $ grep . /sys/devices/virtual/power_supply/battery/* [ 15.339817] Unable to handle kernel paging request at virtual address 0001c12c [ 15.346187] pgd = edd08000 [ 15.348814] [0001c12c] *pgd=6dce2831, *pte=00000000, *ppte=00000000 [ 15.355075] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 15.360967] Modules linked in: [ 15.364010] CPU: 2 PID: 1388 Comm: grep Not tainted 3.17.0-next-20141007-00027-ga95e761db1b0 #245 [ 15.372859] task: ee03ad00 ti: edcf6000 task.ti: edcf6000 [ 15.378241] PC is at 0x1c12c [ 15.381113] LR is at is_ext_pwr_online+0x30/0x6c [ 15.385706] pc : [<0001c12c>] lr : [<c0339fc4>] psr: a0000013 [ 15.385706] sp : edcf7e88 ip : 00000000 fp : 00000000 [ 15.397161] r10: eeb02c08 r9 : c04b1f84 r8 : eeb02c00 [ 15.402369] r7 : edc69a10 r6 : eea6ac10 r5 : eea6ac10 r4 : 00000004 [ 15.408878] r3 : 0001c12c r2 : edcf7e8c r1 : 00000004 r0 : ee914418 [ 15.415390] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.422506] Control: 10c5387d Table: 6dd0804a DAC: 00000015 [ 15.428236] Process grep (pid: 1388, stack limit = 0xedcf6240) [ 15.434050] Stack: (0xedcf7e88 to 0xedcf8000) [ 15.438395] 7e80: ee03ad00 00000000 edcf7f80 eea6aca8 edcf7ec4 c033b7b0 [ 15.446554] 7ea0: 00000001 ee1cc3f0 00000004 c06e1e44 eebdc000 c06e1e44 eeb02c00 c0337144 [ 15.454713] 7ec0: ee2dac68 c005cffc ee1cc3c0 c06e1e44 00000fff 00001000 eebdc000 c0278ca8 [ 15.462872] 7ee0: c0278c8c ee1cc3c0 eeb7ce00 c014422c edcf7f20 00008000 ee1cc3c0 ee9a48c0 [ 15.471030] 7f00: 00000001 00000001 edcf7f80 c0142d94 c0142d70 c01060f4 00021000 ee1cc3f0 [ 15.479190] 7f20: 00000000 00000000 c06a2150 eebdc000 2e7ec000 ee9a48c0 00008000 00021000 [ 15.487349] 7f40: edcf7f80 00008000 edcf6000 00021000 00021000 c00e39a4 00000000 ee9a48c0 [ 15.495508] 7f60: 00004000 00000000 00000000 ee9a48c0 ee9a48c0 00008000 00021000 c00e3aa0 [ 15.503668] 7f80: 00000000 00000000 0001f2e0 0001f2e0 00021000 00001000 00000003 c000f364 [ 15.511826] 7fa0: 00000000 c000f1a0 0001f2e0 00021000 00000003 00021000 00008000 00000000 [ 15.519986] 7fc0: 0001f2e0 00021000 00001000 00000003 00000001 000205e8 00000000 00021000 [ 15.528145] 7fe0: 00008000 bebbe910 0000a7ad b6edc49c 60000010 00000003 aaaaaaaa aaaaaaaa [ 15.536320] [<c0339fc4>] (is_ext_pwr_online) from [<c033b7b0>] (charger_get_property+0x170/0x314) [ 15.545164] [<c033b7b0>] (charger_get_property) from [<c0337144>] (power_supply_show_property+0x48/0x20c) [ 15.554719] [<c0337144>] (power_supply_show_property) from [<c0278ca8>] (dev_attr_show+0x1c/0x48) [ 15.563577] [<c0278ca8>] (dev_attr_show) from [<c014422c>] (sysfs_kf_seq_show+0x84/0x104) [ 15.571725] [<c014422c>] (sysfs_kf_seq_show) from [<c0142d94>] (kernfs_seq_show+0x24/0x28) [ 15.579973] [<c0142d94>] (kernfs_seq_show) from [<c01060f4>] (seq_read+0x1b0/0x484) [ 15.587614] [<c01060f4>] (seq_read) from [<c00e39a4>] (vfs_read+0x88/0x144) [ 15.594552] [<c00e39a4>] (vfs_read) from [<c00e3aa0>] (SyS_read+0x40/0x8c) [ 15.601417] [<c00e3aa0>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 15.608877] Code: bad PC value [ 15.611991] ---[ end trace a88fcc95208db283 ]--- The charger-manager should get reference to charger power supply on each use of get_property callback. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 3bb3dbbd ("power_supply: Add initial Charger-Manager driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit bdbe8144 upstream. The charger manager obtained reference to fuel gauge power supply in probe with power_supply_get_by_name() for later usage. However if fuel gauge driver was removed and re-added then this reference would point to old power supply (from driver which was removed). This lead to accessing old (and probably invalid) memory which could be observed with: $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/unbind $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/bind $ cat /sys/devices/virtual/power_supply/battery/capacity [ 240.480084] INFO: task cat:1393 blocked for more than 120 seconds. [ 240.484799] Not tainted 3.17.0-next-20141007-00028-ge60b6dd79570 #203 [ 240.491782] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.499589] cat D c0469530 0 1393 1 0x00000000 [ 240.505947] [<c0469530>] (__schedule) from [<c0469d3c>] (schedule_preempt_disabled+0x14/0x20) [ 240.514449] [<c0469d3c>] (schedule_preempt_disabled) from [<c046af08>] (mutex_lock_nested+0x1bc/0x458) [ 240.523736] [<c046af08>] (mutex_lock_nested) from [<c0287a98>] (regmap_read+0x30/0x60) [ 240.531647] [<c0287a98>] (regmap_read) from [<c032238c>] (max17042_get_property+0x2e8/0x350) [ 240.540055] [<c032238c>] (max17042_get_property) from [<c03247d8>] (charger_get_property+0x264/0x348) [ 240.549252] [<c03247d8>] (charger_get_property) from [<c0320764>] (power_supply_show_property+0x48/0x1e0) [ 240.558808] [<c0320764>] (power_supply_show_property) from [<c027308c>] (dev_attr_show+0x1c/0x48) [ 240.567664] [<c027308c>] (dev_attr_show) from [<c0141fb0>] (sysfs_kf_seq_show+0x84/0x104) [ 240.575814] [<c0141fb0>] (sysfs_kf_seq_show) from [<c0140b18>] (kernfs_seq_show+0x24/0x28) [ 240.584061] [<c0140b18>] (kernfs_seq_show) from [<c0104574>] (seq_read+0x1b0/0x484) [ 240.591702] [<c0104574>] (seq_read) from [<c00e1e24>] (vfs_read+0x88/0x144) [ 240.598640] [<c00e1e24>] (vfs_read) from [<c00e1f20>] (SyS_read+0x40/0x8c) [ 240.605507] [<c00e1f20>] (SyS_read) from [<c000e760>] (ret_fast_syscall+0x0/0x48) [ 240.612952] 4 locks held by cat/1393: [ 240.616589] #0: (&p->lock){+.+.+.}, at: [<c01043f4>] seq_read+0x30/0x484 [ 240.623414] #1: (&of->mutex){+.+.+.}, at: [<c01417dc>] kernfs_seq_start+0x1c/0x8c [ 240.631086] #2: (s_active#31){++++.+}, at: [<c01417e4>] kernfs_seq_start+0x24/0x8c [ 240.638777] #3: (&map->mutex){+.+...}, at: [<c0287a98>] regmap_read+0x30/0x60 The charger-manager should get reference to fuel gauge power supply on each use of get_property callback. The thermal zone 'tzd' field of power supply should not be used because of the same reason. Additionally this change solves also the issue with nested thermal_zone_get_temp() calls and related false lockdep positive for deadlock for thermal zone's mutex [1]. When fuel gauge is used as source of temperature then the charger manager forwards its get_temp calls to fuel gauge thermal zone. So actually different mutexes are used (one for charger manager thermal zone and second for fuel gauge thermal zone) but for lockdep this is one class of mutex. The recursion is removed by retrieving temperature through power supply's get_property(). In case external thermal zone is used ('cm-thermal-zone' property is present in DTS) the recursion does not exist. Charger manager simply exports POWER_SUPPLY_PROP_TEMP_AMBIENT property (instead of POWER_SUPPLY_PROP_TEMP) thus no thermal zone is created for this power supply. [1] https://lkml.org/lkml/2014/10/6/309Signed-off-by:
-
Krzysztof Kozlowski authored
commit 21e863b2 upstream. Memory allocated for 'name' was leaking if required binding properties were not present. The memory for 'name' was allocated early at probe with kasprintf(). It was freed in error paths executed before and after parsing DTS but not in that error path. Fix the error path for parsing device tree properties. Signed-off-by:
-
Krzysztof Kozlowski authored
commit 0eaf437a upstream. The power_supply_get_by_phandle() on error returns ENODEV or NULL. The driver later expects obtained pointer to power supply to be valid or NULL. If it is not NULL then it dereferences it in bq2415x_notifier_call() which would lead to dereferencing ENODEV-value pointer. Properly handle the power_supply_get_by_phandle() error case by replacing error value with NULL. This indicates that usb charger detection won't be used. Fix also memory leak of 'name' if power_supply_get_by_phandle() fails with NULL and probe should defer. Signed-off-by:
-
James Ralston authored
commit 690000b9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 66a7cbc3 upstream. Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") disabled NCQ on them. It turns out that NCQ is fine as long as MSI is not used, so let's turn off MSI and leave NCQ on. Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Fixes: 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") Signed-off-by:
-
Simon Horman authored
commit aa1cf258 upstream. Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car controller needs to be run with DIPM disabled. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Heinz Mauelshagen authored
commit 40d43c4b upstream. The dm-raid superblock (struct dm_raid_superblock) is padded to 512 bytes and that size is being used to read it in from the metadata device into one preallocated page. Reading or writing this on a 512-byte sector device works fine but on a 4096-byte sector device this fails. Set the dm-raid superblock's size to the logical block size of the metadata device, because IO at that size is guaranteed too work. Also add a size check to avoid silent partial metadata loss in case the superblock should ever grow past the logical block size or PAGE_SIZE. [includes pointer math fix from Dan Carpenter] Reported-by:
"Liuhua Wang" <lwang@suse.com> Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Max Filippov authored
commit 2651cc69 upstream. Userspace actually passes single parameter (path name) to the umount syscall, so new umount just fails. Fix it by requesting old umount syscall implementation and re-wiring umount to it. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 9d28eb12 upstream. The shrinker uses gfp flags to indicate what kind of operation can the driver wait for. If __GFP_IO flag is present, the driver can wait for block I/O operations, if __GFP_FS flag is present, the driver can wait on operations involving the filesystem. dm-bufio tested for __GFP_IO. However, dm-bufio can run on a loop block device that makes calls into the filesystem. If __GFP_IO is present and __GFP_FS isn't, dm-bufio could still block on filesystem operations if it runs on a loop block device. The change from __GFP_IO to __GFP_FS supposedly fixes one observed (though unreproducible) deadlock involving dm-bufio and loop device. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f2e323ec upstream. We need to add a limit check here so we don't overflow the buffer. Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by:
-
- 17 Nov, 2014 8 commits
-
-
Ilya Dryomov authored
commit 792c3a91 upstream. Need to use WQ_MEM_RECLAIM for our workqueues to prevent I/O lockups under memory pressure - we sit on the memory reclaim path. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Tested-by:
Micha Krause <micha@krausam.de> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit 255939e7 upstream. Fix to return -ENOMEM from the workqueue alloc error handling case instead of 0, as done elsewhere in this function. Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Ilya Dryomov authored
commit 58d1362b upstream. drivers/block/rbd.c: In function ‘rbd_dev_device_setup’: drivers/block/rbd.c:5090:19: warning: format not a string literal and no format arguments [-Wformat-security] Reported-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Olivier Gay authored
commit f974008f upstream. Add keyboard input assist controls usages from approved hid usage table request HUTTR42: http://www.usb.org/developers/hidpage/HUTRR42c.pdfSigned-off-by:
Olivier Gay <ogay@logitech.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Adel Gadllah authored
commit 1af39588 upstream. This device needs the quirk as well. Tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by:
-
Adel Gadllah authored
commit 29d05c2e upstream. This device needs the quirk as well. Signed-off-by:
-
Oliver Neukum authored
commit 5235166f upstream. There is a second mouse sharing the same vendor strings but different IDs. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 4980f957 upstream. This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk. Signed-off-by:
-
