- 11 Dec, 2018 10 commits
-
-
Christoph Hellwig authored
There is no good reason to have a double indirection for the sparc32 dma ops, so remove the sparc32_dma_ops and define separate dma_map_ops instance for the different IOMMU types. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Factor the code to remap memory returned from the DMA coherent allocator into two helpers that can be shared by the IOMMU and direct mapping code. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org>
-
Christoph Hellwig authored
No need to BUG_ON() on the cache maintainance ops - they are no-ops by default, and there is nothing in the DMA API contract that prohibits calling them on sbus devices (even if such drivers are unlikely to ever appear). Similarly a dma_supported method that always returns 0 is rather pointless. The only thing that indicates is that no one ever calls the method on sbus devices. Signed-off-by:
-
Robin Murphy authored
DMA debug entries are one of those things which aren't that useful individually - we will always want some larger quantity of them - and which we don't really need to manage the exact number of - we only care about having 'enough'. In that regard, the current behaviour of creating them one-by-one leads to a lot of unwarranted function call overhead and memory wasted on alignment padding. Now that we don't have to worry about freeing anything via dma_debug_resize_entries(), we can optimise the allocation behaviour by grabbing whole pages at once, which will save considerably on the aforementioned overheads, and probably offer a little more cache/TLB locality benefit for traversing the lists under normal operation. This should also give even less reason for an architecture-level override of the preallocation size, so make the definition unconditional - if there is still any desire to change the compile-time value for some platforms it would be better off as a Kconfig option anyway. Since freeing a whole page of entries at once becomes enough of a challenge that it's not really worth complicating dma_debug_init(), we may as well tweak the preallocation behaviour such that as long as we manage to allocate *some* pages, we can leave debugging enabled on a best-effort basis rather than otherwise wasting them. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Tested-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Robin Murphy authored
With the only caller now gone, we can clean up this part of dma-debug's exposed internals and make way to tweak the allocation behaviour. Signed-off-by:
-
Robin Murphy authored
dma-debug is now capable of adding new entries to its pool on-demand if the initial preallocation was insufficient, so the IOMMU_LEAK logic no longer needs to explicitly change the pool size. This does lose it the ability to save a couple of megabytes of RAM by reducing the pool size below its default, but it seems unlikely that that is a realistic concern these days (or indeed that anyone is actively debugging AGP drivers' DMA usage any more). Getting rid of dma_debug_resize_entries() will make room for further streamlining in the dma-debug code itself. Removing the call reveals quite a lot of cruft which has been useless for nearly a decade since commit 19c1a6f5 ("x86 gart: reimplement IOMMU_LEAK feature by using DMA_API_DEBUG"), including the entire 'iommu=leak' parameter, which controlled nothing except whether dma_debug_resize_entries() was called or not. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Robin Murphy authored
Now that we can dynamically allocate DMA debug entries to cope with drivers maintaining excessively large numbers of live mappings, a driver which *does* actually have a bug leaking mappings (and is not unloaded) will no longer trigger the "DMA-API: debugging out of memory - disabling" message until it gets to actual kernel OOM conditions, which means it could go unnoticed for a while. To that end, let's inform the user each time the pool has grown to a multiple of its initial size, which should make it apparent that they either have a leak or might want to increase the preallocation size. Signed-off-by:
-
Robin Murphy authored
Certain drivers such as large multi-queue network adapters can use pools of mapped DMA buffers larger than the default dma_debug_entry pool of 65536 entries, with the result that merely probing such a device can cause DMA debug to disable itself during boot unless explicitly given an appropriate "dma_debug_entries=..." option. Developers trying to debug some other driver on such a system may not be immediately aware of this, and at worst it can hide bugs if they fail to realise that dma-debug has already disabled itself unexpectedly by the time their code of interest gets to run. Even once they do realise, it can be a bit of a pain to emprirically determine a suitable number of preallocated entries to configure, short of massively over-allocating. There's really no need for such a static limit, though, since we can quite easily expand the pool at runtime in those rare cases that the preallocated entries are insufficient, which is arguably the least surprising and most useful behaviour. To that end, refactor the prealloc_memory() logic a little bit to generalise it for runtime reallocations as well. Signed-off-by:
-
Robin Murphy authored
Use pr_fmt() to generate the "DMA-API: " prefix consistently. This results in it being added to a couple of pr_*() messages which were missing it before, and for the err_printk() calls moves it to the actual start of the message instead of somewhere in the middle. Signed-off-by:
-
Robin Murphy authored
Expose nr_total_entries in debugfs, so that {num,min}_free_entries become even more meaningful to users interested in current/maximum utilisation. This becomes even more relevant once nr_total_entries may change at runtime beyond just the existing AMD GART debug code. Suggested-by:John Garry <john.garry@huawei.com> Signed-off-by:
-
- 06 Dec, 2018 24 commits
-
-
Christoph Hellwig authored
These days architectures are mostly out of the business of dealing with struct scatterlist at all, unless they have architecture specific iommu drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN one only enabled for architectures with horrible legacy iommu drivers like alpha and parisc, and conditionally for arm which wants to keep it disable for legacy platforms. Signed-off-by:
Palmer Dabbelt <palmer@sifive.com>
-
Christoph Hellwig authored
Currently dma_mapping_error returns a boolean as int, with 1 meaning error. This is rather unusual and many callers have to convert it to errno value. The callers are highly inconsistent with error codes ranging from -ENOMEM over -EIO, -EINVAL and -EFAULT ranging to -EAGAIN. Return -ENOMEM which seems to be what the largest number of callers convert it to, and which also matches the typical error case where we are out of resources. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
No users left except for vmd which just forwards it. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Pass the page + offset to the low-level __iommu_map_single helper (which gets renamed to fit the new calling conventions) as both callers have the page at hand. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Note that the existing code used AMD_IOMMU_MAPPING_ERROR to check from a 0 return from the IOVA allocator, which is replaced with an explicit 0 as in the implementation and other users of that interface. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma mapping failure and let the core dma-mapping code handle the rest. Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma mapping failure and let the core dma-mapping code handle the rest. Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Remove the odd sba_{un,}map_single_attrs wrappers, check errors everywhere. Signed-off-by: -
Christoph Hellwig authored
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Just return DMA_MAPPING_ERROR from __dummy_map_page and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
The SBA iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
The CCIO iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Sparc already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
S390 already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
The Jazz iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
The powerpc iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Arm already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
The dma-direct code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by:
-
Christoph Hellwig authored
Error handling of the dma_map_single and dma_map_page APIs is a little problematic at the moment, in that we use different encodings in the returned dma_addr_t to indicate an error. That means we require an additional indirect call to figure out if a dma mapping call returned an error, and a lot of boilerplate code to implement these semantics. Instead return the maximum addressable value as the error. As long as we don't allow mapping single-byte ranges with single-byte alignment this value can never be a valid return. Additionaly if drivers do not check the return value from the dma_map* routines this values means they will generally not be pointed to actual memory. Once the default value is added here we can start removing the various mapping_error methods and just rely on this generic check. Signed-off-by:
-
- 05 Dec, 2018 1 commit
-
-
Marek Szyprowski authored
Commit bfd56cd6 ("dma-mapping: support highmem in the generic remap allocator") replaced dma_direct_alloc_pages() with __dma_direct_alloc_pages(), which doesn't set dma_handle and zero allocated memory. Fix it by doing this directly in the caller function. Fixes: bfd56cd6 ("dma-mapping: support highmem in the generic remap allocator") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
- 01 Dec, 2018 5 commits
-
-
Christoph Hellwig authored
The csky code was largely copied from arm/arm64, so switch to the generic arm64-based implementation instead. Signed-off-by:
Guo Ren <ren_guo@c-sky.com>
-
Christoph Hellwig authored
csky does not implement ZONE_DMA, which means passing GFP_DMA is a no-op. Signed-off-by:
-
Christoph Hellwig authored
This option is gone past Linux 4.19. Signed-off-by:
-
Christoph Hellwig authored
Do not waste vmalloc space on allocations that do not require a mapping into the kernel address space. Signed-off-by:
-
Christoph Hellwig authored
By using __dma_direct_alloc_pages we can deal entirely with struct page instead of having to derive a kernel virtual address. Signed-off-by:
-
