Commits · ce6f6cffaeaa0a3bcdafcae7fe03c68c3afae631 · Kirill Smelkov / linux

24 Jan, 2024 30 commits

selftests/bpf: Wait for the netstamp_needed_key static key to be turned on · ce6f6cff

Martin KaFai Lau authored Jan 19, 2024

After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:

rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0

The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.

The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.

This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.

To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.

Fixes: c803475f ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev

ce6f6cff

selftests/bpf: Fix the flaky tc_redirect_dtime test · 177f1d08

Martin KaFai Lau authored Jan 19, 2024

BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:

test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec

The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.

The symptom is this first connect() is always slow. In my setup, it
could take ~3s.

After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.

I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
  and triggered the ndisc_error_report() => ip6_link_failure() =>
  icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
  the ICMPV6_DEST_UNREACH message.

The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.

Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.

Fixes: c803475f ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev

177f1d08

libbpf: Correct bpf_core_read.h comment wrt bpf_core_relo struct · d47b9f68

Dima Tisnek authored Jan 21, 2024

Past commit ([0]) removed the last vestiges of struct bpf_field_reloc,
it's called struct bpf_core_relo now.

  [0] 28b93c64 ("libbpf: Clean up and improve CO-RE reloc logging")
Signed-off-by: Dima Tisnek <dimaqq@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240121060126.15650-1-dimaqq@gmail.com

d47b9f68

Merge branch 'skip-callback-tests-if-jit-is-disabled-in-test_verifier' · 32749605

Andrii Nakryiko authored Jan 23, 2024

Tiezhu Yang says:

====================
Skip callback tests if jit is disabled in test_verifier

Thanks very much for the feedbacks from Eduard, John, Jiri, Daniel,
Hou Tao, Song Liu and Andrii.

v7:
  -- Add an explicit flag F_NEEDS_JIT_ENABLED for checking,
     thanks Andrii.

v6:
  -- Copy insn_is_pseudo_func() into testing_helpers,
     thanks Andrii.

v5:
  -- Reuse is_ldimm64_insn() and insn_is_pseudo_func(),
     thanks Song Liu.

v4:
  -- Move the not-allowed-checking into "if (expected_ret ...)"
     block, thanks Hou Tao.
  -- Do some small changes to avoid checkpatch warning
     about "line length exceeds 100 columns".

v3:
  -- Rebase on the latest bpf-next tree.
  -- Address the review comments by Hou Tao,
     remove the second argument "0" of open(),
     check only once whether jit is disabled,
     check fd_prog, saved_errno and jit_disabled to skip.
====================

Link: https://lore.kernel.org/r/20240123090351.2207-1-yangtiezhu@loongson.cnSigned-off-by: Andrii Nakryiko <andrii@kernel.org>

32749605

selftests/bpf: Skip callback tests if jit is disabled in test_verifier · 0b50478f

Tiezhu Yang authored Jan 23, 2024

If CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is 0, there
exist 6 failed tests.

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
  [root@linux bpf]# ./test_verifier | grep FAIL
  #106/p inline simple bpf_loop call FAIL
  #107/p don't inline bpf_loop call, flags non-zero FAIL
  #108/p don't inline bpf_loop call, callback non-constant FAIL
  #109/p bpf_loop_inline and a dead func FAIL
  #110/p bpf_loop_inline stack locations for loop vars FAIL
  #111/p inline bpf_loop call in a big program FAIL
  Summary: 768 PASSED, 15 SKIPPED, 6 FAILED

The test log shows that callbacks are not allowed in non-JITed programs,
interpreter doesn't support them yet, thus these tests should be skipped
if jit is disabled.

Add an explicit flag F_NEEDS_JIT_ENABLED to those tests to mark that they
require JIT enabled in bpf_loop_inline.c, check the flag and jit_disabled
at the beginning of do_test_single() to handle this case.

With this patch:

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
  [root@linux bpf]# ./test_verifier | grep FAIL
  Summary: 768 PASSED, 21 SKIPPED, 0 FAILED
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-3-yangtiezhu@loongson.cn

0b50478f

selftests/bpf: Move is_jit_enabled() into testing_helpers · 15b4f88d

Tiezhu Yang authored Jan 23, 2024

Currently, is_jit_enabled() is only used in test_progs, move it into
testing_helpers so that it can be used in test_verifier. While at it,
remove the second argument "0" of open() as Hou Tao suggested.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-2-yangtiezhu@loongson.cn

15b4f88d

Merge branch 'Registrating struct_ops types from modules' · 8b593021

Martin KaFai Lau authored Jan 23, 2024

Kui-Feng Lee says:

====================
Given the current constraints of the current implementation,
struct_ops cannot be registered dynamically. This presents a
significant limitation for modules like coming fuse-bpf, which seeks
to implement a new struct_ops type. To address this issue, a new API
is introduced that allows the registration of new struct_ops types
from modules.

Previously, struct_ops types were defined in bpf_struct_ops_types.h
and collected as a static array. The new API lets callers add new
struct_ops types dynamically. The static array has been removed and
replaced by the per-btf struct_ops_tab.

The struct_ops subsystem relies on BTF to determine the layout of
values in a struct_ops map and identify the subsystem that the
struct_ops map registers to. However, the kernel BTF does not include
the type information of struct_ops types defined by a module. The
struct_ops subsystem requires knowledge of the corresponding module
for a given struct_ops map and the utilization of BTF information from
that module. We empower libbpf to determine the correct module for
accessing the BTF information and pass an identity (FD) of the module
btf to the kernel. The kernel looks up type information and registered
struct_ops types directly from the given btf.

If a module exits while one or more struct_ops maps still refer to a
struct_ops type defined by the module, it can lead to unforeseen
complications. Therefore, it is crucial to ensure that a module
remains intact as long as any struct_ops map is still linked to a
struct_ops type defined by the module. To achieve this, every
struct_ops map holds a reference to the module while being registered.

Changes from v16:

 - Fix unnecessary bpf_struct_ops_link_create() removing/adding.

 - Rename REGISTER_BPF_STRUCT_OPS() to register_bpf_struct_ops().

 - Implement bpf_map_struct_ops_info_fill() for !CONFIG_BPF_JIT.

Changes from v15:

 - Fix the misleading commit message of part 4.

 - Introduce BPF_F_VTYPE_BTF_OBJ_FD flag to struct bpf_attr to tell
   if value_type_btf_obj_fd is set or not.

 - Introduce links_cnt to struct bpf_struct_ops_map to avoid accessing
   struct bpf_struct_ops_desc in bpf_struct_ops_map_put_progs() after
   calling module_put() against the owner module of the struct_ops
   type. (Part 9)

Changes from v14:

 - Rebase. Add cif_stub required by
   the commit 2cd3e377 ("x86/cfi,bpf: Fix bpf_struct_ops CFI")

 - Remove creating struct_ops map without bpf_testmod.ko from the
   test.

 - Check the name of btf returned by bpf_map_info by getting the name
   with bpf_btf_get_info_by_fd().

 - Change value_type_btf_obj_fd to a signed type to allow the 0 fd.

Changes from v13:

 - Change the test case to use bpf_map_create() to create a struct_ops
   map while testmod.ko is unloaded.

 - Move bpf_struct_ops_find*() to btf.c.

 - Use btf_is_module() to replace btf != btf_vmlinux.

Changes from v12:

 - Rebase to for-next to fix conflictions.

Changes from v11:

 - bpf_struct_ops_maps hold only the refcnt to the module, but not
   btf. (patch 1)

 - Fix warning messages. (patch 1, 9 and 10)

 - Remove unnecessary conditional compiling of CONFIG_BPF_JIT.
   (patch 4, 9 and 10)

 - Fix the commit log of the patch 7 to explain how a btf is pass from
   the user space and how the kernel handle it.

 - bpf_struct_ops_maps hold the module defining it's type, but not
   btf. A map will hold the module through its life-span from
   allocating to being free. (patch 8)

 - Change selftests and tracing __bpf_struct_ops_map_free() to wait
   for the release of the bpf_testmod module.

 - Include btf_obj_id in bpf_map_info. (patch 14)

Changes from v10:

 - Guard btf.c from CONFIG_BPF_JIT=n. This patchset has introduced
   symbols from bpf_struct_ops.c which is only built when
   CONFIG_BPF_JIT=y.

 - Fix the warning of unused errout_free label by moving code that is
   leaked to patch 8 to patch 7.

Changes from v9:

 - Remove the call_rcu_tasks_trace() changes from kern_sync_rcu().

 - Trace btf_put() in the test case to ensure the release of kmod's
   btf, or the consequent tests may fail for using kmod's unloaded old
   btf instead the new one created after loading again. The kmod's btf
   may live for awhile after unloading the kmod, for a map being freed
   asynchronized is still holding the btf.

 - Split "add struct_ops_tab to btf" into tow patches by adding
   "make struct_ops_map support btfs other than btf_vmlinux".

 - Flip the order of "pass attached BTF to the bpf_struct_ops
   subsystem" and "hold module for bpf_struct_ops_map" to make it more
   reasonable.

 - Fix the compile errors of a missing header file.

Changes from v8:

 - Rename bpf_struct_ops_init_one() to bpf_struct_ops_desc_init().

 - Move code that using BTF_ID_LIST to the newly added patch 2.

 - Move code that lookup struct_ops types from a given module to the
   newly added patch 5.

 - Store the pointers of btf at st_maps.

 - Add test cases for the cases of modules being unload.

 - Call bpf_struct_ops_init() in btf_add_struct_ops() to fix an
   inconsistent issue.

Changes from v7:

 - Fix check_struct_ops_btf_id() to use attach btf if there is instead
   of btf_vmlinux.

Changes from v6:

 - Change returned error code to -EINVAL for the case of
   bpf_try_get_module().

 - Return an error code from bpf_struct_ops_init().

 - Fix the dependency issue of testing_helpers.c and
   rcu_tasks_trace_gp.skel.h.

Changes from v5:

 - As the 2nd patch, we introduce "bpf_struct_ops_desc". This change
   involves moving certain members of "bpf_struct_ops" to
   "bpf_struct_ops_desc", which becomes a part of
   "btf_struct_ops_tab". This ensures that these members remain
   accessible even when the owner module of a "bpf_struct_ops" is
   unloaded.

 - Correct the order of arguments when calling
    in the 3rd patch.

 - Remove the owner argument from bpf_struct_ops_init_one(). Instead,
   callers should fill in st_ops->owner.

 - Make sure to hold the owner module when calling
   bpf_struct_ops_find() and bpf_struct_ops_find_value() in the 6th
   patch.

 - Merge the functions register_bpf_struct_ops_btf() and
   register_bpf_struct_ops() into a single function and relocate it to
   btf.c for better organization and clarity.

 - Undo the name modifications made to find_kernel_btf_id() and
   find_ksym_btf_id() in the 8th patch.

Changes from v4:

 - Fix the dependency between testing_helpers.o and
   rcu_tasks_trace_gp.skel.h.

Changes from v3:

 - Fix according to the feedback for v3.

   - Change of the order of arguments to make btf as the first
     argument.

   - Use btf_try_get_module() instead of try_get_module() since the
     module pointed by st_ops->owner can gone while some one is still
     holding its btf.

   - Move variables defined by BPF_STRUCT_OPS_COMMON_VALUE to struct
     bpf_struct_ops_common_value to validation easier.

   - Register the struct_ops type defined by bpf_testmod in its init
     function.

   - Rename field name to 'value_type_btf_obj_fd' to make it explicit.

   - Fix leaking of btf objects on error.

   - st_maps hold their modules to keep modules alive and prevent they
     from unloading.

   - bpf_map of libbpf keeps mod_btf_fd instead of a pointer to module_btf.

   - Do call_rcu_tasks_trace() in kern_sync_rcu() to ensure the
     bpf_testmod is unloaded properly. It uses rcu_tasks_trace_gp to
     trigger call_rcu_tasks_trace() in the kernel.

 - Merge and reorder patches in a reasonable order.

Changes from v2:

 - Remove struct_ops array, and add a per-btf (module) struct_ops_tab
   to collect registered struct_ops types.

 - Validate value_type by checking member names and types.
---
v16: https://lore.kernel.org/all/20240118014930.1992551-1-thinker.li@gmail.com/
v15: https://lore.kernel.org/all/20231220222654.1435895-1-thinker.li@gmail.com/
v14: https://lore.kernel.org/all/20231217081132.1025020-1-thinker.li@gmail.com/
v13: https://lore.kernel.org/all/20231209002709.535966-1-thinker.li@gmail.com/
v12: https://lore.kernel.org/all/20231207013950.1689269-1-thinker.li@gmail.com/
v11: https://lore.kernel.org/all/20231106201252.1568931-1-thinker.li@gmail.com/
v10: https://lore.kernel.org/all/20231103232202.3664407-1-thinker.li@gmail.com/
v9: https://lore.kernel.org/all/20231101204519.677870-1-thinker.li@gmail.com/
v8: https://lore.kernel.org/all/20231030192810.382942-1-thinker.li@gmail.com/
v7: https://lore.kernel.org/all/20231027211702.1374597-1-thinker.li@gmail.com/
v6: https://lore.kernel.org/all/20231022050335.2579051-11-thinker.li@gmail.com/
v5: https://lore.kernel.org/all/20231017162306.176586-1-thinker.li@gmail.com/
v4: https://lore.kernel.org/all/20231013224304.187218-1-thinker.li@gmail.com/
v3: https://lore.kernel.org/all/20230920155923.151136-1-thinker.li@gmail.com/
v2: https://lore.kernel.org/all/20230913061449.1918219-1-thinker.li@gmail.com/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

8b593021

selftests/bpf: test case for register_bpf_struct_ops(). · 0253e059

Kui-Feng Lee authored Jan 19, 2024

Create a new struct_ops type called bpf_testmod_ops within the bpf_testmod
module. When a struct_ops object is registered, the bpf_testmod module will
invoke test_2 from the module.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-15-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

0253e059

bpf: export btf_ctx_access to modules. · 7c81c249

Kui-Feng Lee authored Jan 19, 2024

The module requires the use of btf_ctx_access() to invoke
bpf_tracing_btf_ctx_access() from a module. This function is valuable for
implementing validation functions that ensure proper access to ctx.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-14-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

7c81c249

libbpf: Find correct module BTFs for struct_ops maps and progs. · 9e926acd

Kui-Feng Lee authored Jan 19, 2024

Locate the module BTFs for struct_ops maps and progs and pass them to the
kernel. This ensures that the kernel correctly resolves type IDs from the
appropriate module BTFs.

For the map of a struct_ops object, the FD of the module BTF is set to
bpf_map to keep a reference to the module BTF. The FD is passed to the
kernel as value_type_btf_obj_fd when the struct_ops object is loaded.

For a bpf_struct_ops prog, attach_btf_obj_fd of bpf_prog is the FD of a
module BTF in the kernel.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240119225005.668602-13-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

9e926acd

bpf, net: switch to dynamic registration · f6be98d1

Kui-Feng Lee authored Jan 19, 2024

Replace the static list of struct_ops types with per-btf struct_ops_tab to
enable dynamic registration.

Both bpf_dummy_ops and bpf_tcp_ca now utilize the registration function
instead of being listed in bpf_struct_ops_types.h.

Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-12-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

f6be98d1

bpf: validate value_type · 612d087d

Kui-Feng Lee authored Jan 19, 2024

A value_type should consist of three components: refcnt, state, and data.
refcnt and state has been move to struct bpf_struct_ops_common_value to
make it easier to check the value type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-11-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

612d087d

bpf: hold module refcnt in bpf_struct_ops map creation and prog verification. · e3f87fdf

Kui-Feng Lee authored Jan 19, 2024

To ensure that a module remains accessible whenever a struct_ops object of
a struct_ops type provided by the module is still in use.

struct bpf_struct_ops_map doesn't hold a refcnt to btf anymore since a
module will hold a refcnt to it's btf already. But, struct_ops programs are
different. They hold their associated btf, not the module since they need
only btf to assure their types (signatures).

However, verifier holds the refcnt of the associated module of a struct_ops
type temporarily when verify a struct_ops prog. Verifier needs the help
from the verifier operators (struct bpf_verifier_ops) provided by the owner
module to verify data access of a prog, provide information, and generate
code.

This patch also add a count of links (links_cnt) to bpf_struct_ops_map. It
avoids bpf_struct_ops_map_put_progs() from accessing btf after calling
module_put() in bpf_struct_ops_map_free().
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-10-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

e3f87fdf

bpf: pass attached BTF to the bpf_struct_ops subsystem · fcc2c1fb

Kui-Feng Lee authored Jan 19, 2024

Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.

In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.

A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.

In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.

In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

fcc2c1fb

bpf: lookup struct_ops types from a given module BTF. · 689423db

Kui-Feng Lee authored Jan 19, 2024

This is a preparation for searching for struct_ops types from a specified
module. BTF is always btf_vmlinux now. This patch passes a pointer of BTF
to bpf_struct_ops_find_value() and bpf_struct_ops_find(). Once the new
registration API of struct_ops types is used, other BTFs besides
btf_vmlinux can also be passed to them.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-8-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

689423db

bpf: pass btf object id in bpf_map_info. · 1338b933

Kui-Feng Lee authored Jan 19, 2024

Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.

Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

1338b933

bpf: make struct_ops_map support btfs other than btf_vmlinux. · 47f4f657

Kui-Feng Lee authored Jan 19, 2024

Once new struct_ops can be registered from modules, btf_vmlinux is no
longer the only btf that struct_ops_map would face. st_map should remember
what btf it should use to get type information.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-6-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

47f4f657

bpf: add struct_ops_tab to btf. · e6199511

Kui-Feng Lee authored Jan 19, 2024

Maintain a registry of registered struct_ops types in the per-btf (module)
struct_ops_tab. This registry allows for easy lookup of struct_ops types
that are registered by a specific module.

It is a preparation work for supporting kernel module struct_ops in a
latter patch. Each struct_ops will be registered under its own kernel
module btf and will be stored in the newly added btf->struct_ops_tab. The
bpf verifier and bpf syscall (e.g. prog and map cmd) can find the
struct_ops and its btf type/size/id... information from
btf->struct_ops_tab.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-5-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

e6199511

bpf, net: introduce bpf_struct_ops_desc. · 4c5763ed

Kui-Feng Lee authored Jan 19, 2024

Move some of members of bpf_struct_ops to bpf_struct_ops_desc. type_id is
unavailabe in bpf_struct_ops anymore. Modules should get it from the btf
received by kmod's init function.

Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-4-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

4c5763ed

bpf: get type information with BTF_ID_LIST · 95678395

Kui-Feng Lee authored Jan 19, 2024

Get ready to remove bpf_struct_ops_init() in the future. By using
BTF_ID_LIST, it is possible to gather type information while building
instead of runtime.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-3-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

95678395

bpf: refactory struct_ops type initialization to a function. · 3b1f89e7

Kui-Feng Lee authored Jan 19, 2024

Move the majority of the code to bpf_struct_ops_init_one(), which can then
be utilized for the initialization of newly registered dynamically
allocated struct_ops types in the following patches.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-2-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

3b1f89e7

Merge branch 'bpf-add-cookies-retrieval-for-perf-kprobe-multi-links' · b7d1af37

Alexei Starovoitov authored Jan 23, 2024

Jiri Olsa says:

====================
bpf: Add cookies retrieval for perf/kprobe multi links

hi,
this patchset adds support to retrieve cookies from existing tracing
links that still did not support it plus changes to bpftool to display
them. It's leftover we discussed some time ago [1].

thanks,
jirka

v2 changes:
 - added review/ack tags
 - fixed memory leak [Quentin]
 - align the uapi fields properly [Yafang Shao]

[1] https://lore.kernel.org/bpf/CALOAHbAZ6=A9j3VFCLoAC_WhgQKU7injMf06=cM2sU4Hi4Sx+Q@mail.gmail.com/Reviewed-by: Quentin Monnet <quentin@isovalent.com>
---
====================
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20240119110505.400573-1-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>