- 16 Aug, 2022 10 commits
-
-
Tim Huang authored
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating. The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1, so need to add IP version checking to use the right REG offset. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for HDP IP v5.2.1. Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for MMHUB IP v3.0.1. Signed-off-by:
-
Tim Huang authored
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by:
-
Felix Kuehling authored
Use the mm reference from the fence. This allows removing the svm_bo->svms pointer, which was problematic because we cannot assume that the struct kfd_process containing the svms is still allocated without holding a refcount on the process. Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo reference if it isn't. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Kenneth Feng authored
add mode1 support since it's missing on smu_v13_0_7 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Kenneth Feng authored
add ih cg and hdp sd on smu_v13_0_7 Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Evan Quan authored
Without these, potential memory leak may be induced. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
To avoid any potential memory leak. Signed-off-by:
-
Evan Quan authored
Some stability issues were reported with these features. Signed-off-by:
-
- 10 Aug, 2022 30 commits
-
-
Sebin Sebastian authored
Fix a double free and an uninitialized pointer read error. Both tmp and new are pointing at same address and both are freed which leads to double free. Adding a check to verify if new and tmp are free in the error_free label fixes the double free issue. new is not initialized to null which also leads to a free on an uninitialized pointer. Reviewed-by:
André Almeida <andrealmeid@igalia.com> Suggested by: S. Amaranath <Amaranath.Somalapuram@amd.com> Signed-off-by:
Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by:
-
Alex Deucher authored
We changed it for all asics due to a hibernation regression on hawaii, but the workaround breaks suspend on a polaris12. Just disable it for hawaii. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Fixes: 3a4b1cc2 ("drm/amdgpu/display: disable prefer_shadow for generic fb helpers") Reviewed-and-tested-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Melissa Wen authored
To set the panel orientation property with quirk, we need the mode size provided by EDID. This info is available after EDID is read by dc_link_detect() and updated by amdgpu_dm_update_connector_after_detect(). The detection happens at driver load in amdgpu_dm_initialize_drm_device() and, therefore, we can get modes and set panel orientation before drm_dev_register() to avoid DRM warns on creating the connector property after device registration: [ 2.563969] ------------[ cut here ]------------ [ 2.563971] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x72/0x80 [drm] [ 2.563997] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564032] CPU: 6 PID: 325 Comm: systemd-udevd Not tainted 5.18.0-amd-staging-drm-next+ #67 [ 2.564034] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564036] RIP: 0010:drm_mode_object_add+0x72/0x80 [drm] [ 2.564053] Code: f0 89 c3 85 c0 78 07 89 45 00 44 89 65 04 4c 89 ef e8 e2 99 04 f1 31 c0 85 db 0f 4e c3 5b 5d 41 5c 41 5d c3 80 7f 50 00 74 ac <0f> 0b eb a8 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 4c [ 2.564055] RSP: 0018:ffffb2e880413860 EFLAGS: 00010202 [ 2.564056] RAX: ffffffffc0ba1440 RBX: ffff99508a860010 RCX: 0000000000000001 [ 2.564057] RDX: 00000000b0b0b0b0 RSI: ffff99508c050110 RDI: ffff99508a860010 [ 2.564058] RBP: ffff99508c050110 R08: 0000000000000020 R09: ffff99508c292c20 [ 2.564059] R10: 0000000000000000 R11: ffff99508c0507d8 R12: 00000000b0b0b0b0 [ 2.564060] R13: 0000000000000004 R14: ffffffffc068a4b6 R15: ffffffffc068a47f [ 2.564061] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564063] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564065] Call Trace: [ 2.564068] <TASK> [ 2.564070] drm_property_create+0xc9/0x170 [drm] [ 2.564088] drm_property_create_enum+0x1f/0x70 [drm] [ 2.564105] drm_connector_set_panel_orientation_with_quirk+0x96/0xc0 [drm] [ 2.564123] get_modes+0x4fb/0x530 [amdgpu] [ 2.564378] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.564390] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.564411] ? xas_store+0x52/0x5e0 [ 2.564416] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564420] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.564430] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.564438] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.564446] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.564621] local_pci_probe+0x45/0x80 [ 2.564625] ? pci_match_device+0xd7/0x130 [ 2.564627] pci_device_probe+0xbf/0x220 [ 2.564629] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.564633] really_probe+0x19c/0x380 [ 2.564637] __driver_probe_device+0xfe/0x180 [ 2.564639] driver_probe_device+0x1e/0x90 [ 2.564641] __driver_attach+0xc0/0x1c0 [ 2.564643] ? __device_attach_driver+0xe0/0xe0 [ 2.564644] ? __device_attach_driver+0xe0/0xe0 [ 2.564646] bus_for_each_dev+0x78/0xc0 [ 2.564648] bus_add_driver+0x149/0x1e0 [ 2.564650] driver_register+0x8f/0xe0 [ 2.564652] ? 0xffffffffc1023000 [ 2.564654] do_one_initcall+0x44/0x200 [ 2.564657] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564659] do_init_module+0x4c/0x250 [ 2.564663] __do_sys_init_module+0x12e/0x1b0 [ 2.564666] do_syscall_64+0x3b/0x90 [ 2.564670] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.564673] RIP: 0033:0x7fc69bff232e [ 2.564674] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.564676] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.564677] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.564678] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.564679] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.564680] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.564681] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.564683] </TASK> [ 2.564683] ---[ end trace 0000000000000000 ]--- [ 2.564696] ------------[ cut here ]------------ [ 2.564696] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x52/0x80 [drm] [ 2.564717] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564738] CPU: 6 PID: 325 Comm: systemd-udevd Tainted: G W 5.18.0-amd-staging-drm-next+ #67 [ 2.564740] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564741] RIP: 0010:drm_object_attach_property+0x52/0x80 [drm] [ 2.564759] Code: 2d 83 f8 18 74 33 48 89 74 c1 08 48 8b 4f 08 48 89 94 c1 c8 00 00 00 48 8b 47 08 83 00 01 c3 4d 85 d2 75 dd 83 7f 58 01 75 d7 <0f> 0b eb d3 41 80 78 50 00 74 cc 0f 0b eb c8 44 89 ce 48 c7 c7 28 [ 2.564760] RSP: 0018:ffffb2e8804138d8 EFLAGS: 00010246 [ 2.564761] RAX: 0000000000000010 RBX: ffff99508c1a2000 RCX: ffff99508c1a2180 [ 2.564762] RDX: 0000000000000003 RSI: ffff99508c050100 RDI: ffff99508c1a2040 [ 2.564763] RBP: 00000000ffffffff R08: ffff99508a860010 R09: 00000000c0c0c0c0 [ 2.564763] R10: 0000000000000000 R11: 0000000000000020 R12: ffff99508a860010 [ 2.564764] R13: ffff995088733008 R14: ffff99508c1a2000 R15: ffffffffc068a47f [ 2.564765] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564766] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564767] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564768] Call Trace: [ 2.564769] <TASK> [ 2.564770] drm_connector_set_panel_orientation_with_quirk+0x4a/0xc0 [drm] [ 2.564789] get_modes+0x4fb/0x530 [amdgpu] [ 2.565024] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.565036] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.565056] ? xas_store+0x52/0x5e0 [ 2.565060] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565062] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.565072] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.565080] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.565088] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.565261] local_pci_probe+0x45/0x80 [ 2.565263] ? pci_match_device+0xd7/0x130 [ 2.565265] pci_device_probe+0xbf/0x220 [ 2.565267] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.565268] really_probe+0x19c/0x380 [ 2.565270] __driver_probe_device+0xfe/0x180 [ 2.565272] driver_probe_device+0x1e/0x90 [ 2.565274] __driver_attach+0xc0/0x1c0 [ 2.565276] ? __device_attach_driver+0xe0/0xe0 [ 2.565278] ? __device_attach_driver+0xe0/0xe0 [ 2.565279] bus_for_each_dev+0x78/0xc0 [ 2.565281] bus_add_driver+0x149/0x1e0 [ 2.565283] driver_register+0x8f/0xe0 [ 2.565285] ? 0xffffffffc1023000 [ 2.565286] do_one_initcall+0x44/0x200 [ 2.565288] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565290] do_init_module+0x4c/0x250 [ 2.565291] __do_sys_init_module+0x12e/0x1b0 [ 2.565294] do_syscall_64+0x3b/0x90 [ 2.565296] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.565297] RIP: 0033:0x7fc69bff232e [ 2.565298] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.565299] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.565301] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.565302] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.565303] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.565303] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.565304] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.565306] </TASK> [ 2.565307] ---[ end trace 0000000000000000 ]--- -- v2: - call amdgpu_dm_connector_get_modes() instead of ddc_get_modes() (Harry) Fixes: d77de788 ("amd/display: enable panel orientation quirks") Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Zhen Ni authored
Memory is allocated for gpu_metrics_table in smu_v13_0_5_init_smc_tables(), but not freed in smu_v13_0_5_fini_smc_tables(). This may cause memory leaks, fix it. Reviewed-by:
Zhen Ni <nizhen@uniontech.com> Signed-off-by:
-
Zhen Ni authored
Memory is allocated for gpu_metrics_table in smu_v13_0_4_init_smc_tables(), but not freed in smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it. Reviewed-by:
-
Tim Huang authored
Add AMD_PG_SUPPORT_GFX_PG support. Signed-off-by:
-
Tim Huang authored
Enable GFX Power Gating control for GC IP v11.0.1. Signed-off-by:
-
Felix Kuehling authored
When kfd_ioctl_wait_events needs to restart due to a signal, we need to update the timeout to account for the time already elapsed. We also need to undo auto_reset of events that have signaled already, so that the restarted ioctl will be able to count those signals again. This fixes infinite hangs when kfd_ioctl_wait_events is interrupted by a signal. Signed-off-by:
Xiaogang Chen <Xiaogang.Chen@amd.com> Signed-off-by:
-
Rajneesh Bhardwaj authored
For typesafety, use container_of() instead of implicit cast from struct ttm_tt to struct amdgpu_ttm_tt. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Kenneth Feng authored
skip pptable override for smu_v13_0_7 secure boards only. Signed-off-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Evan Quan authored
Add support for 3715 softpptable. Signed-off-by:
-
Joseph Greathouse authored
Enable translate_further on Arcturus and Aldebaran server chips in order to increase the UTCL2 reach from 8 GiB to 64 GiB, which is more in line with the amount of framebuffer DRAM in the devices. Signed-off-by:
Joseph Greathouse <Joseph.Greathouse@amd.com> Acked-by:
Kent Russell <kent.russell@amd.com> Acked-by:
-
Aric Cyr authored
This version brings along following fixes: - Move fpu file to dml folder - Fix CAB allocation for multiple displays - Add a variable to update FCLK - Fix TMDS 4K@60Hz YCbCr420 corruption issue - Fix MPC tree infinite loop in some case - Fix HDMI VSIF V3 blank screen issue - Add some documentation to the code - Allow alternate prefetch modes in DML for DCN32 - Fix VPG instancing for dcn314 HPO - Check correct bounds for stream encoder instances for DCN303 - Enable SubVP by default on DCN32 & DCN321 - Fix DTBCLK not correct for dcn314 - Fix Compile-time warning - Fix the stereo mode hang issue - Fix display light up issue Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] SUBVP_START_LINE must be aligned to 2 swaths, so add 16 lines of margin so the start line can be adjusted by up to 16 lines for alignment purposes in FW. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Meenakshikumar Somasundaram authored
[Why] After TDR recovery, eDP and USB4 display does not light up. Because dmub outbox notifications are not enabled after dmub reload and link encoder assignments for the streams are not cleared before dc state reset. [How] - Dmub outbox notification is enabled after tdr recovery by issuing inbox command to dmub. - Link encoders for the streams are unassigned before dc state reset. Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by:
-
Fudong Wang authored
[Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off. [How] Clear that if have when clock off. Reviewed-by:
Fudong Wang <Fudong.Wang@amd.com> Tested-by:
-
Alvin Lee authored
[Description] MALL not supported with stereo3D according to DCN doc. Reviewed-by:
-
Alvin Lee authored
[Description] Observed in stereomode that programming FLIP_LEFT_EYE can cause hangs. Keep FLIP_ANY_FRAME in stereo mode so the surface flip can take place before left or right eye Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Alvin Lee authored
[Description] Reverts commit "attempt to fix the logic in commit_planes_for_stream()" since it caused a regression. Reviewed-by:
-
Duncan Ma authored
[Why] DTBCLK clocks reset after clocks are initialized and bounding box values are also incorrect. [How] Use dcn31 init clock function programming sequence and correct bounding box values for dcn314 Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why&How] Set the debug options to enable SubVP feature Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why & How] eng_id for DCN303 cannot be more than 1, since we have only two instances of stream encoders. Check the correct boundary condition for engine ID for DCN303 prevent the potential out of bounds access. Fixes: cd6d421e ("drm/amd/display: Initial DC support for Beige Goby") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
-
Duncan Ma authored
[Why] An issue during VPG indexing offset generation causing to use the incorrect VPG. HW team placed VPG instances 5 at end of list, making it VPG 9 in register headers. [How] Correct VPG instance for HPO encoders. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
David Galiffi authored
Fixed bracketing around condition statement. Reviewed-by:
David Galiffi <David.Galiffi@amd.com> Tested-by:
-
David Galiffi authored
[Why] Driver is restricting voltage levels if system cannot switch in vblank. [How] Change allow_for_pstate_or_stutter_in_vblank_final from dm_prefetch_support_uclk_fclk_and_stutter to dm_prefetch_support_uclk_fclk_and_stutter_if_possible. Add support for a new registry property, DalDMLDisallowAlternatePrefetchModes, for easier debugging. Reviewed-by:
-
Leo Ma authored
[Why] Reported from customer the checksum in AMD VSIF V3 is incorrect and causing blank screen issue. [How] Fix the packet length issue on AMD HDMI VSIF V3. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
Josip Pavic authored
[Why] In some cases MPC tree bottom pipe ends up point to itself. This causes iterating from top to bottom to hang the system in an infinite loop. [How] When looping to next MPC bottom pipe, check that the pointer is not same as current to avoid infinite loop. Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Chiawen Huang authored
[Why] Enabling stream with tg lock makes config settings pending causing the garbage until tg unlock. [How] Keep the original lock mechanism The driver doesn't lock tg if plane_state is null. Reviewed-by:
Chiawen Huang <chiawen.huang@amd.com> Tested-by:
-
Daniel Miess authored
[Why] DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314 resulting in incorrect timing for YCbCr4:2:0 [How] Copy the implementation of set_pixels_per_cycle from dcn32 over to dcn314 Reviewed-by:
Daniel Miess <Daniel.Miess@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Add a variable to update FCLK latency Reviewed-by:
-
