- 27 Jul, 2017 25 commits
-
-
Mathias Nyman authored
commit a54408d0 upstream. A uncleared PLC (port link change) bit will prevent furuther port event interrupts for that port. Leaving it uncleared caused get_port_status() to timeout after 20000ms while waiting to get the final port event interrupt for resume -> U0 state change. This is a targeted fix for a specific case where we get a port resume event racing with xhci resume. The port event interrupt handler notices xHC is not yet running and bails out early, leaving PLC uncleared. The whole xhci port resuming needs more attention, but while working on it it anyways makes sense to always ensure PLC is cleared in get_port_status before setting a new link state and waiting for its completion. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen Yu authored
commit e60514bd upstream. Currently we saw a lot of "No irq handler" errors during hibernation, which caused the system hang finally: ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) do_IRQ: 31.151 No irq handler for vector According to above logs, there is an interrupt triggered and it is dispatched to CPU31 with a vector number 151, but there is no handler for it, thus this IRQ will not get acked and will cause an IRQ flood which kills the system. To be more specific, the 31.151 is an interrupt from the AHCI host controller. After some investigation, the reason why this issue is triggered is because the thaw_noirq() function does not restore the MSI/MSI-X settings across hibernation. The scenario is illustrated below: 1. Before hibernation, IRQ 34 is the handler for the AHCI device, which is bound to CPU31. 2. Hibernation starts, the AHCI device is put into low power state. 3. All the nonboot CPUs are put offline, so IRQ 34 has to be migrated to the last alive one - CPU0. 4. After the snapshot has been created, all the nonboot CPUs are brought up again; IRQ 34 remains bound to CPU0. 5. AHCI devices are put into D0. 6. The snapshot is written to the disk. The issue is triggered in step 6. The AHCI interrupt should be delivered to CPU0, however it is delivered to the original CPU31 instead, which causes the "No irq handler" issue. Ying Huang has provided a clue that, in step 3 it is possible that writing to the register might not take effect as the PCI devices have been suspended. In step 3, the IRQ 34 affinity should be modified from CPU31 to CPU0, but in fact it is not. In __pci_write_msi_msg(), if the device is already in low power state, the low level MSI message entry will not be updated but cached. During the device restore process after a normal suspend/resume, pci_restore_msi_state() writes the cached MSI back to the hardware. But this is not the case for hibernation. pci_restore_msi_state() is not currently called in pci_pm_thaw_noirq(), although pci_save_state() has saved the necessary PCI cached information in pci_pm_freeze_noirq(). Restore the PCI status for the device during hibernation. Otherwise the status might be lost across hibernation (for example, settings for MSI, MSI-X, ATS, ACS, IOV, etc.), which might cause problems during hibernation. Suggested-by:
Ying Huang <ying.huang@intel.com> Suggested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
Herbert Xu authored
commit 096f41d3 upstream. The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Oliver O'Halloran authored
commit 2400fd82 upstream. The workaround for the CELL timebase bug does not correctly mark cr0 as being clobbered. This means GCC doesn't know that the asm block changes cr0 and might leave the result of an unrelated comparison in cr0 across the block, which we then trash, leading to basically random behaviour. Fixes: 859deea9 ("[POWERPC] Cell timebase bug workaround") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> [mpe: Tweak change log and flag for stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Anton Blanchard authored
commit 64e756c5 upstream. From POWER4 onwards, mfocrf() only places the specified CR field into the destination GPR, and the rest of it is set to 0. The PowerPC AS from version 3.0 now requires this behaviour. The emulation code currently puts the entire CR into the destination GPR. Fix it. Fixes: 6888199f ("[POWERPC] Emulate more instructions in software") Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
commit 87c4b83e upstream. The mcrf emulation code was using the CR field number directly as the shift value, without taking into account that CR fields are numbered from 0-7 starting at the high bits. That meant it was looking at the CR fields in the reverse order. Fixes: cf87c3f6 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions") Signed-off-by:
-
Michael Ellerman authored
commit 01e6a61a upstream. Although it's not documented anywhere, there is an expectation that atomic64_inc_not_zero() returns a result which fits in an int. This is the behaviour implemented on all arches except powerpc. This has caused at least one bug in practice, in the percpu-refcount code, where the long result from our atomic64_inc_not_zero() was truncated to an int leading to lost references and stuck systems. That was worked around in that code in commit 966d2b04 ("percpu-refcount: fix reference leak during percpu-atomic transition"). To the best of my grepping abilities there are no other callers in-tree which truncate the value, but we should fix it anyway. Because the breakage is subtle and potentially very harmful I'm also tagging it for stable. Code generation is largely unaffected because in most cases the callers are just using the result for a test anyway. In particular the case of fget() that was mentioned in commit a6cf7ed5 ("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly the same code. Fixes: a6cf7ed5 ("powerpc/atomic: Implement atomic*_inc_not_zero") Noticed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Maurizio Lombardi authored
commit 62e62ffd upstream. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Tested-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit b556b15d upstream. of_genpd_del_provider() iterates over list of domain provides and removes matching element thus it has to use safe version of list iteration. Fixes: aa42240a (PM / Domains: Add generic OF-based PM domain look-up) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit c6e83cac upstream. pm_genpd_remove_subdomain() iterates over domain's master_links list and removes matching element thus it has to use safe version of list iteration. Fixes: f721889f ("PM / Domains: Support for generic I/O PM domains (v8)") Signed-off-by:
-
Satish Babu Patakokila authored
commit 01b8cedf upstream. Currently compress driver hardcodes direction as playback to get substream from the stream. This results in getting the incorrect substream for compressed capture usecase. To fix this, remove the hardcoding and derive substream based on the stream direction. Signed-off-by:
Satish Babu Patakokila <sbpata@codeaurora.org> Signed-off-by:
Banajit Goswami <bgoswami@codeaurora.org> Acked-By:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 329d8230 upstream. This file is filled with complex cryptography. Thus, the comparisons of MACs and secret keys and curve points and so forth should not add timing attacks, which could either result in a direct forgery, or, given the complexity, some other type of attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Mateusz Jurczyk authored
commit f6a5885f upstream. Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() handlers of the AF_NFC socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Joe Perches authored
commit 8c7fbe57 upstream. Commit 38764884 ("include/stddef.h: Move offsetofend() from vfio.h to a generic kernel header") added offsetofend outside the normal include #ifndef/#endif guard. Move it inside. Miscellanea: o remove unnecessary blank line o standardize offsetof macros whitespace style Signed-off-by:
Joe Perches <joe@perches.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Denys Vlasenko authored
commit 38764884 upstream. Suggested by Andy. Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mateusz Jurczyk authored
commit 608c4adf upstream. Fix the sockaddr length verification in the connect() handler of NFC/LLCP sockets, to compare against the size of the actual structure expected on input (sockaddr_nfc_llcp) instead of its shorter version (sockaddr_nfc). Both structures are defined in include/uapi/linux/nfc.h. The fields specific to the _llcp extended struct are as follows: 276 __u8 dsap; /* Destination SAP, if known */ 277 __u8 ssap; /* Source SAP to be bound to */ 278 char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */; 279 size_t service_name_len; If the caller doesn't provide a sufficiently long sockaddr buffer, these fields remain uninitialized (and they currently originate from the stack frame of the top-level sys_connect handler). They are then copied by llcp_sock_connect() into internal storage (nfc_llcp_sock structure), and could be subsequently read back through the user-mode getsockname() function (handled by llcp_sock_getname()). This would result in the disclosure of up to ~70 uninitialized bytes from the kernel stack to user-mode clients capable of creating AFC_NFC sockets. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mateusz Jurczyk authored
commit a0323b97 upstream. Check that the NFC_ATTR_TARGET_INDEX and NFC_ATTR_PROTOCOLS attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by:
-
Johan Hovold authored
commit 20777bc5 upstream. Commit 7eda8b8e ("NFC: Use IDR library to assing NFC devices IDs") moved device-id allocation and struct-device initialisation from nfc_allocate_device() to nfc_register_device(). This broke just about every nfc-device-registration error path, which continue to call nfc_free_device() that tries to put the device reference of the now uninitialised (but zeroed) struct device: kobject: '(null)' (ce316420): is not initialized, yet kobject_put() is being called. The late struct-device initialisation also meant that various work queues whose names are derived from the nfc device name were also misnamed: 421 root 0 SW< [(null)_nci_cmd_] 422 root 0 SW< [(null)_nci_rx_w] 423 root 0 SW< [(null)_nci_tx_w] Move the id-allocation and struct-device initialisation back to nfc_allocate_device() and fix up the single call site which did not use nfc_free_device() in its error path. Fixes: 7eda8b8e ("NFC: Use IDR library to assing NFC devices IDs") Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Miaoqing Pan authored
commit bde717ab upstream. The hard coded register 0x9864 and 0x9924 are invalid for ar9300 chips. Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Miaoqing Pan authored
commit cf8ce1ea upstream. One scenario that could lead to UAF is two threads writing simultaneously to the "tx99" debug file. One of them would set the "start" value to true and follow to ath9k_tx99_init(). Inside the function it would set the sc->tx99_state to true after allocating sc->tx99skb. Then, the other thread would execute write_file_tx99() and call ath9k_tx99_deinit(). sc->tx99_state would be freed. After that, the first thread would continue inside ath9k_tx99_init() and call r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl); that would make use of the freed sc->tx99_skb memory. Signed-off-by:
-
Pavel Shilovsky authored
Commit 99e214e0 ("Handle mismatched open calls") was applied with errors that result in initializing handle_cancelled_mid callback twice in smb21_operations and smb30_operations structures but not initializing it in smb20_operations structure. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Arnd Bergmann authored
commit bd7e31bb upstream. gcc-7 suggests that an expression using a bitwise not and a bitmask on a 'bool' variable is better written using boolean logic: drivers/media/rc/imon.c: In function 'imon_incoming_scancode': drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation] ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1; ^ drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not? I agree. Fixes: 21677cfc ("V4L/DVB: ir-core: add imon driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Colin King authored
commit d505ad1d upstream. Building with clang: CC arch/x86/kernel/rtc.o arch/x86/kernel/rtc.c:173:29: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] static const char * const const ids[] __initconst = Remove the duplicate const, it is not needed and causes a warning. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: http://lkml.kernel.org/r/1421244475-313-1-git-send-email-colin.king@canonical.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jiri Slaby authored
commit 8678654e upstream. gcc 7 warns: arch/x86/kvm/ioapic.c: In function 'kvm_ioapic_reset': arch/x86/kvm/ioapic.c:597:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] And it is right. Memset whole array using sizeof operator. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> [Added x86 subject tag] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit bd664f6b upstream. I made the mistake of upgrading my desktop to the new Fedora 26 that comes with gcc-7.1.1. There's nothing wrong per se that I've noticed, but I now have 1500 lines of warnings, mostly from the new format-truncation warning triggering all over the tree. We use 'snprintf()' and friends in a lot of places, and often know that the numbers are fairly small (ie a controller index or similar), but gcc doesn't know that, and sees an 'int', and thinks that it could be some huge number. And then complains when our buffers are not able to fit the name for the ten millionth controller. These warnings aren't necessarily bad per se, and we probably want to look through them subsystem by subsystem, but at least during the merge window they just mean that I can't even see if somebody is introducing any *real* problems when I pull. So warnings disabled for now. Signed-off-by:
-
- 21 Jul, 2017 15 commits
-
-
Greg Kroah-Hartman authored
-
Pavankumar Kondeti authored
commit c59f29cb upstream. The 's' flag is supposed to indicate that a softirq is running. This can be detected by testing the preempt_count with SOFTIRQ_OFFSET. The current code tests the preempt_count with SOFTIRQ_MASK, which would be true even when softirqs are disabled but not serving a softirq. Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.orgSigned-off-by:
Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 2ca30331 upstream. In the current code, if the user accidentally writes a bogus command to this sysfs file, then we set the latency tolerance to an uninitialized variable. Fixes: 2d984ad1 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Peter Zijlstra authored
commit 73bb059f upstream. The point of sched_group_mask is to select those CPUs from sched_group_cpus that can actually arrive at this balance domain. The current code gets it wrong, as can be readily demonstrated with a topology like: node 0 1 2 3 0: 10 20 30 20 1: 20 10 20 30 2: 30 20 10 20 3: 20 30 20 10 Where (for example) domain 1 on CPU1 ends up with a mask that includes CPU0: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 (mask: 1), 2, 0 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072) This causes sched_balance_cpu() to compute the wrong CPU and consequently should_we_balance() will terminate early resulting in missed load-balance opportunities. The fixed topology looks like: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 (mask: 1), 2, 0 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072) (note: this relies on OVERLAP domains to always have children, this is true because the regular topology domains are still here -- this is before degenerate trimming) Debugged-by:
Lauro Ramos Venancio <lvenanci@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: e3589f6c ("sched: Allow for overlapping sched_domain spans") Signed-off-by:
-
Lauro Ramos Venancio authored
commit f32d782e upstream. The group mask is always used in intersection with the group CPUs. So, when building the group mask, we don't have to care about CPUs that are not part of the group. Signed-off-by:
-
Horia Geantă authored
commit 7459e1d2 upstream. Driver does not properly handle the case when signals interrupt wait_for_completion_interruptible(): -it does not check for return value -completion structure is allocated on stack; in case a signal interrupts the sleep, it will go out of scope, causing the worker thread (caam_jr_dequeue) to fail when it accesses it wait_for_completion_interruptible() is replaced with uninterruptable wait_for_completion(). We choose to block all signals while waiting for I/O (device executing the split key generation job descriptor) since the alternative - in order to have a deterministic device state - would be to flush the job ring (aborting *all* in-progress jobs). Fixes: 045e3678 ("crypto: caam - ahash hmac support") Fixes: 4c1ec1f9 ("crypto: caam - refactor key_gen, sg") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Herbert Xu authored
commit b82ce244 upstream. It has been reported that sha1-avx2 can cause page faults by reading beyond the end of the input. This patch disables it until it can be fixed. Fixes: 7c1da8d0 ("crypto: sha - SHA1 transform x86_64 AVX2") Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 1606043f upstream. The Atmel SHA driver was treating -EBUSY as indication of queueing to backlog without checking that backlog is enabled for the request. Fix it by checking request flags. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Martin Hicks authored
commit 03d2c511 upstream. An updated patch that also handles the additional key length requirements for the AEAD algorithms. The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD algorithms it's longer still. Extend the max keysize for the AEAD size for AES256 + HMAC(SHA512). Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms") Signed-off-by:
Martin Hicks <mort@bork.org> Acked-by:
-
Helge Deller authored
commit 37511fb5 upstream. Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90 ("Allow stack to grow up to address space limit") Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Adam Borowski authored
commit 6987dc8a upstream. Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
-
Kees Cook authored
commit da029c11 upstream. To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by:
-
Cyril Bur authored
commit 8d81ae05 upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by:
Cyril Bur <cyrilbur@gmail.com> Acked-by:
-
Sahitya Tummala authored
commit b17c070f upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
Sahitya Tummala <stummala@codeaurora.org> Suggested-by:
Jan Kara <jack@suse.cz> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
-
Marcin Nowakowski authored
commit c0d80dda upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
