- 21 Jan, 2018 2 commits
-
-
Arnd Bergmann authored
The switch log prints the tv_sec portion of timespec as a 32-bit number, while overflows in 2106. It also uses the timespec type, which is safe on 64-bit architectures, but deprecated because it causes overflows in 2038 elsewhere. This changes it to timespec64 and printing a 64-bit number for consistency. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Arnd Bergmann authored
In an effort to remove all instances of 'struct timeval' from the kernel, I'm changing the powerpc mpic_timer interface to use plain seconds instead. There is only one user of this interface, and that doesn't use the microseconds portion, so the code gets noticeably simpler in the process. Signed-off-by:
-
- 20 Jan, 2018 25 commits
-
-
Alexey Kardashevskiy authored
9003a249 removed checn from the DMA window pages allocator, however the VFIO driver tests limits before doing so by calling the get_table_size hook which was left behind; this fixes it. Fixes: 9003a249 "powerpc/powernv/ioda: Remove explicit max window size check" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Anshuman Khandual authored
Radix enabled platforms don't support subpage_prot() system calls. But at present the system call goes through without an error and fails later on while validating expected subpage accesses. Lets not allow the system call on powerpc radix platforms to begin with to prevent this confusion in user space. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Ram Pai authored
Patch provides the ability for a process to associate a pkey with a address range. Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Ram Pai authored
Finally this patch provides the ability for a process to allocate and free a protection key. Signed-off-by:
-
Ram Pai authored
PAPR defines 'ibm,processor-storage-keys' property. It exports two values. The first value holds the number of data-access keys and the second holds the number of instruction-access keys. Due to a bug in the firmware, instruction-access keys is always reported as zero. However any key can be configured to disable data-access and/or disable execution-access. The inavailablity of the second value is not a big handicap, though it could have been used to determine if the platform supported disable-execution-access. Non-PAPR platforms do not define this property in the device tree yet. Fortunately power8 is the only released Non-PAPR platform that is supported. Here, we hardcode the number of supported pkey to 32, by consulting the PowerISA3.0 This patch calculates the number of keys supported by the platform. Also it determines the platform support for read/write/execution access support for pkeys. Signed-off-by:
-
Thiago Jung Bauermann authored
The AMR/IAMR/UAMOR are part of the program context. Allow it to be accessed via ptrace and through core files. Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
-
Ram Pai authored
The value of the pkey, whose protection got violated, is made available in si_pkey field of the siginfo structure. Signed-off-by:
-
Ram Pai authored
get_mm_addr_key() helper returns the pkey associated with an address corresponding to a given mm_struct. Signed-off-by:
-
Ram Pai authored
Handle Data and Instruction exceptions caused by memory protection-key. The CPU will detect the key fault if the HPTE is already programmed with the key. However if the HPTE is not hashed, a key fault will not be detected by the hardware. The software will detect pkey violation in such a case. Signed-off-by:
-
Ram Pai authored
This patch provides the implementation for arch_vma_access_permitted(). Returns true if the requested access is allowed by pkey associated with the vma. Signed-off-by:
-
Ram Pai authored
Make sure that the kernel does not access user pages without checking their key-protection. Signed-off-by:
-
Ram Pai authored
helper function that checks if the read/write/execute is allowed on the pte. Signed-off-by:
-
Ram Pai authored
Map the PTE protection key bits to the HPTE key protection bits, while creating HPTE entries. Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Ram Pai authored
Map the key protection bits of the vma to the pkey bits in the PTE. The PTE bits used for pkey are 3,4,5,6 and 57. The first four bits are the same four bits that were freed up initially in this patch series. remember? :-) Without those four bits this patch wouldn't be possible. BUT, on 4k kernel, bit 3, and 4 could not be freed up. remember? Hence we have to be satisfied with 5, 6 and 7. Signed-off-by:
-
Ram Pai authored
arch independent code calls arch_override_mprotect_pkey() to return a pkey that best matches the requested protection. This patch provides the implementation. Signed-off-by:
-
Ram Pai authored
arch-independent code expects the arch to map a pkey into the vma's protection bit setting. The patch provides that ability. Signed-off-by:
-
Ram Pai authored
This patch provides the implementation of execute-only pkey. The architecture-independent layer expects the arch-dependent layer, to support the ability to create and enable a special key which has execute-only permission. Acked-by:
-
Ram Pai authored
Store and restore the AMR, IAMR and UAMOR register state of the task before scheduling out and after scheduling in, respectively. Signed-off-by:
-
Ram Pai authored
powerpc has hardware support to disable execute on a pkey. This patch enables the ability to create execute-disabled keys. Signed-off-by:
-
Ram Pai authored
This patch provides the detailed implementation for a user to allocate a key and enable it in the hardware. It provides the plumbing, but it cannot be used till the system call is implemented. The next patch will do so. Reviewed-by:
-
Ram Pai authored
Cleanup the bits corresponding to a key in the AMR, and IAMR register, when the key is newly allocated/activated or is freed. We dont want some residual bits cause the hardware enforce unintended behavior when the key is activated or freed. Reviewed-by:
-
Ram Pai authored
Introduce helper functions that can initialize the bits in the AMR, IAMR and UAMOR register; the bits that correspond to the given pkey. Reviewed-by:
-
Ram Pai authored
Implements helper functions to read and write the key related registers; AMR, IAMR, UAMOR. AMR register tracks the read,write permission of a key IAMR register tracks the execute permission of a key UAMOR register enables and disables a key Acked-by:
-
Ram Pai authored
Total 32 keys are available on power7 and above. However pkey 0,1 are reserved. So effectively we have 30 pkeys. On 4K kernels, we do not have 5 bits in the PTE to represent all the keys; we only have 3bits. Two of those keys are reserved; pkey 0 and pkey 1. So effectively we have 6 pkeys. This patch keeps track of reserved keys, allocated keys and keys that are currently free. Also it adds skeletal functions and macros, that the architecture-independent code expects to be available. Reviewed-by:
-
Ram Pai authored
Basic plumbing to initialize the pkey system. Nothing is enabled yet. A later patch will enable it once all the infrastructure is in place. Signed-off-by:
-
- 19 Jan, 2018 13 commits
-
-
Christophe Lombard authored
The POWER9 core supports a new feature: ASB_Notify which requires the support of the Special Purpose Register: TIDR. The ASB_Notify command, generated by the AFU, will attempt to wake-up the host thread identified by the particular LPID:PID:TID. This patch assign a unique TIDR (thread id) for the current thread which will be used in the process element entry. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by:
Philippe Bergheaud <felix@linux.vnet.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Anju T Sudhakar authored
Change the data type for the variable 'ncpu' in ppc_core_imc_cpu_offline(), since cpumask_any_but() returns an 'int' value. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Anju T Sudhakar authored
In memory Collection (IMC) counter pmu driver controls the ucode's execution state. At the system boot, IMC perf driver pause the ucode. Ucode state is changed to "running" only when any of the nest units are monitored or profiled using perf tool. Nest units support only limited set of hardware counters and ucode is always programmed in the "production mode" ("accumulation") mode. This mode is configured to provide key performance metric data for most of the nest units. But ucode also supports other modes which would be used for "debug" to drill down specific nest units. That is, ucode when switched to "powerbus" debug mode (for example), will dynamically reconfigure the nest counters to target only "powerbus" related events in the hardware counters. This allows the IMC nest unit to focus on powerbus related transactions in the system in more detail. At this point, production mode events may or may not be counted. IMC nest counters has both in-band (ucode access) and out of band access to it. Since not all nest counter configurations are supported by ucode, out of band tools are used to characterize other nest counter configurations. Patch provides an interface via "debugfs" to enable the switching of ucode modes in the system. To switch ucode mode, one has to first pause the microcode (imc_cmd), and then write the target mode value to the "imc_mode" file. Proposed Approach: In the proposed approach, the function (export_imc_mode_and_cmd) which creates the debugfs interface for imc mode and command is implemented in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer base address for each chip. The interface to expose imc mode and command is required only if we have nest pmu units registered. Employing the existing data structures to track whether we have any nest units registered will require to extend data from perf side to opal-imc.c. Instead an integer is introduced to hold that information by counting successful nest unit registration. Debugfs interface is removed based on the integer count. Example for the interface: $ ls /sys/kernel/debug/imc imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Signed-off-by: -
Anju T Sudhakar authored
Remove the allocation of struct imc_events from imc_parse_event(). Instead pass imc_events as a parameter to imc_parse_event(), which is a pointer to a slot in the array allocated in update_events_in_group(). Reported-by: Dan Carpenter ("powerpc/perf: Fix a sizeof() typo so we allocate less memory") Suggested-by: -
Anju T Sudhakar authored
Factor out memory freeing part for attribute elements from imc_common_cpuhp_mem_free(). Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Anju T Sudhakar authored
Remove the global variable 'thread_imc_pmu', since it is not used in the code. Signed-off-by:
-
Madhavan Srinivasan authored
local_t is used for atomic modifications for per-CPU data, versus re-entrant modifications via interrupts. local_t read-modify-write atomic operations are currently implemented with hardware atomics (larx/stcx), which are quite slow. This patch implements them by masking all types of interrupts that may do local_t operations ("standard" and perf interrupts). Rusty's benchmark (https://lkml.org/lkml/2008/12/16/450) gives the following timings for the local_t test, in nanoseconds per iteration: larx/stcx irq+pmu disable _inc 38 10 _add 38 10 _read 4 4 _add_return 38 10 There are still some interrupt types (system reset, machine check, and watchdog), which can not safely use local_t operations, because they are not masked. An alternative approach was proposed, using a CR bit to mark a critical section, which is tested in the interrupt return path, and would then branch to a fixup handler (similar to exception fixups), which re-starts the operation. The problem with this was the complexity of the fixup handler and the latency of the slow path. https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/123024.htmlSigned-off-by: -
Madhavan Srinivasan authored
powerpc implements local_t with atomic operations. There is already an asm-generic implementation which does this using atomic_t. Signed-off-by:
-
Madhavan Srinivasan authored
To support soft-masking of the performance monitor interrupt, a set of new powerpc_local_irq_pmu_save() and powerpc_local_irq_restore() functions are added. And powerpc_local_irq_save() implemented, by adding a new irq_soft_mask manipulation function irq_soft_mask_or_return(). Local_irq_pmu_* macros are provided to access these powerpc_local_irq_pmu* functions which includes trace_hardirqs_on|off() to match what we have in include/linux/irqflags.h. Signed-off-by:
-
Madhavan Srinivasan authored
New Kconfig is added "CONFIG_PPC_IRQ_SOFT_MASK_DEBUG" to add WARN_ON to alert the invalid transitions. Also moved the code under the CONFIG_TRACE_IRQFLAGS in arch_local_irq_restore() to new Kconfig. Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Madhavan Srinivasan authored
Two new bit mask field "IRQ_DISABLE_MASK_PMU" is introduced to support the masking of PMI and "IRQ_DISABLE_MASK_ALL" to aid interrupt masking checking. Couple of new irq #defs "PACA_IRQ_PMI" and "SOFTEN_VALUE_0xf0*" added to use in the exception code to check for PMI interrupts. In the masked_interrupt handler, for PMIs we reset the MSR[EE] and return. In the __check_irq_replay(), replay the PMI interrupt by calling performance_monitor_common handler. Signed-off-by:
-
Madhavan Srinivasan authored
To support addition of "bitmask" to MASKABLE_* macros, factor out the EXCPETION_PROLOG_1 macro. Make it explicit the interrupt masking supported by a gievn interrupt handler. Patch correspondingly extends the MASKABLE_* macros with an addition's parameter. "bitmask" parameter is passed to SOFTEN_TEST macro to decide on masking the interrupt. Signed-off-by:
-
Madhavan Srinivasan authored
Currently we use both EXCEPTION_PROLOG_1 and __EXCEPTION_PROLOG_1 in the MASKABLE_* macros. As a cleanup, this patch makes MASKABLE_* to use only __EXCEPTION_PROLOG_1. There is not logic change. Signed-off-by:
-
