In the rxkad security class, don't use pskb_pull() to advance through the
contents of the response packet.  There's no point, especially as the next
and last access to the skbuff still has to allow for the wire header in the
offset (which we didn't advance over).

Better to just add the displacement to the next offset.
Signed-off-by: David Howells <dhowells@redhat.com>

Organise the security information in the rxrpc_connection struct to use a
union to allow for different data for different security classes.
Signed-off-by: David Howells <dhowells@redhat.com>

Insert the security header into the skbuff representing a DATA packet to be
transmitted rather than using skb_reserve() when the packet is allocated.
This makes it easier to apply crypto that spans the security header and the
data, particularly in the upcoming RxGK class where we have a common
encrypt-and-checksum function that is used in a number of circumstances.
Signed-off-by: David Howells <dhowells@redhat.com>

Merge the ->prime_packet_security() into the ->init_connection_security()
hook as they're always called together.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix an example of an rxrpc key name in a comment.
Signed-off-by: David Howells <dhowells@redhat.com>

When parsing a payload for an rxrpc-type key, ignore any tokens that are
not of a known type and don't give an error for them - unless there are no
tokens of a known type.
Signed-off-by: David Howells <dhowells@redhat.com>

Make the parsing of xdr-encoded payloads, as passed to add_key, more
coherent.  Shuttling back and forth between various variables was a bit
hard to follow.
Signed-off-by: David Howells <dhowells@redhat.com>

Allow a security class to give more information on an rxrpc_s-type key when
it is viewed in /proc/keys.  This will allow the upcoming RxGK security
class to show the enctype name here.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't let someone reading a service-side rxrpc-type key get access to the
session key that was exchanged with the client.  The server application
will, at some point, need to be able to read the information in the ticket,
but this probably shouldn't include the key material.
Signed-off-by: David Howells <dhowells@redhat.com>

Hand responsibility for parsing a server key off to the security class.  We
can determine which class from the description.  This is necessary as rxgk
server keys have different lookup requirements and different content
requirements (dependent on crypto type) to those of rxkad server keys.
Signed-off-by: David Howells <dhowells@redhat.com>

Split the server private key type (rxrpc_s) out into its own file rather
than mingling it with the authentication/client key type (rxrpc) since they
don't really bear any relation.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't retain a pointer to the server key in the connection, but rather get
it on demand when the server has to deal with a response packet.

This is necessary to implement RxGK (GSSAPI-mediated transport class),
where we can't know which key we'll need until we've challenged the client
and got back the response.

This also means that we don't need to do a key search in the accept path in
softirq mode.

Also, whilst we're at it, allow the security class to ask for a kvno and
encoding-type variant of a server key as RxGK needs different keys for
different encoding types.  Keys of this type have an extra bit in the
description:

	"<service-id>:<security-index>:<kvno>:<enctype>"
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc-type keys can have multiple tokens attached for different security
classes.  Currently, rxrpc always picks the first one, whether or not the
security class it indicates is supported.

Add preliminary support for choosing which security class will be used
(this will need to be directed from a higher layer) and go through the
tokens to find one that's supported.
Signed-off-by: David Howells <dhowells@redhat.com>

When viewing an rxrpc-type key through /proc/keys, display a list of held
token types.
Signed-off-by: David Howells <dhowells@redhat.com>

Remove the rxrpc rxk5 security class as it's now defunct and nothing uses
it anymore.
Signed-off-by: David Howells <dhowells@redhat.com>

Provide the proposed description (add key) or the original description
(update/instantiate key) when preparsing a key so that the key type can
validate it against the data.

This is important for rxrpc server keys as we need to check that they have
the right amount of key material present - and it's better to do that when
the key is loaded rather than deep in trying to process a response packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: keyrings@vger.kernel.org

Add support to choose RSS flow key algorithm with IPv4 transport protocol
field included in hashing input data. This will be enabled by default.
There-by enabling 3/5 tuple hash
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201120093906.2873616-1-george.cherian@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2020-11-20

The first patch is by Yegor Yefremov and he improves the j1939 documentaton by
adding tables for the CAN identifier and its fields.

Then there are 8 patches by Oliver Hartkopp targeting the CAN driver
infrastructure and drivers. These add support for optional DLC element to the
Classical CAN frame structure. See patch ea780056 ("can: add optional DLC
element to Classical CAN frame structure") for details. Oliver's last patch
adds len8_dlc support to several drivers. Stefan Mätje provides a patch to add
len8_dlc support to the esd_usb2 driver.

The next patch is by Oliver Hartkopp, too and adds support for modification of
Classical CAN DLCs to CAN GW sockets.

The next 3 patches target the nxp,flexcan DT bindings. One patch by my adds the
missing uint32 reference to the clock-frequency property. Joakim Zhang's
patches fix the fsl,clk-source property and add the IMX_SC_R_CAN() macro to the
imx firmware header file, which will be used in the flexcan driver later.

Another patch by Joakim Zhang prepares the flexcan driver for SCU based
stop-mode, by giving the existing, GPR based stop-mode, a _GPR postfix.

The next 5 patches are by me, target the flexcan driver, and clean up the
.ndo_open and .ndo_stop callbacks. These patches try to fix a sporadically
hanging flexcan_close() during simultanious ifdown, sending of CAN messages and
probably open CAN bus. I was never able to reproduce, but these seem to fix the
problem at the reporting user. As these changes are rather big, I'd like to
mainline them via net-next/master.

The next patches are by Jimmy Assarsson and Christer Beskow, they add support
for new USB devices to the existing kvaser_usb driver.

The last patch is by Kaixu Xia and simplifies the return in the
mcp251xfd_chip_softreset() function in the mcp251xfd driver.

* tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (25 commits)
  can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset
  can: kvaser_usb: Add new Kvaser hydra devices
  can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant
  can: kvaser_usb: Add new Kvaser Leaf v2 devices
  can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines
  can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
  can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
  can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
  can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
  can: flexcan: factor out enabling and disabling of interrupts into separate function
  can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR
  dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN
  dt-bindings: can: fsl,flexcan: fix fsl,clk-source property
  dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property
  can: gw: support modification of Classical CAN DLCs
  can: drivers: add len8_dlc support for esd_usb2 CAN adapter
  can: drivers: add len8_dlc support for various CAN adapters
  can: drivers: introduce helpers to access Classical CAN DLC values
  can: update documentation for DLC usage in Classical CAN
  can: rename CAN FD related can_len2dlc and can_dlc2len helpers
  ...
====================

Link: https://lore.kernel.org/r/20201120133318.3428231-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use netdev->tstats instead of a member of net_bridge for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9bad2be2-fd84-7c6e-912f-cee433787018@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Huazhong Tan says:

====================
net: hns3: misc updates for -next

This series includes some misc updates for the HNS3 ethernet driver.

 #1 adds support for 1280 queues
 #2 adds mapping for BAR45 which is needed by RoCE client.
 #3 extend the interrupt resources.
 #4&#5 add support to query firmware's calculated shaping parameters.
====================

Link: https://lore.kernel.org/r/1605863783-36995-1-git-send-email-tanhuazhong@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adds debugfs to dump new shaping parameters: rate and flag.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the calculation of the driver is fixed, if the number of
queue or clock changed, the calculated result may be inaccurate.

So for compatible and maintainable, add a new flag to tell the
firmware to calculate the shaping parameters with the specified
rate.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For HNAE3_DEVICE_VERSION_V3, a maximum of 1281 interrupt
resources are supported. To utilize these new resources,
extend the corresponding field or variable to 16bit type,
and remove the restriction of NIC client that only use a
maximum of 65 interrupt vectors. In addition, the I/O address
of the extended interrupt resources are different, so an extra
handler is needed.

Currently, the total number of interrupts is the sum of RoCE's
number and RoCE's offset (RoCE is in front of NIC), since
the number of both NIC and RoCE are same. For readability,
rewrite the corresponding field of the command, rename the
RoCE's offset field as the number of NIC interrupts, then
the total number of interrupts is sum of the number of RoCE
and NIC, and replace vport->back with hdev in
hclge_init_roce_base_info() for simplifying the code.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For device who has device memory accessed through the PCI BAR4,
IO descriptor push of NIC and direct WQE(Work Queue Element) of
RoCE will use this device memory, so add support for mapping
this device memory, and add this info to the RoCE client whose
new feature needs.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For DEVICE_VERSION_V1/2, there are total 1024 queues and
queue sets. For DEVICE_VERSION_V3, it increases to 1280,
and can be assigned to one pf， so remove the limitation
of 1024.

To keep compatible with DEVICE_VERSION_V1/2 and old driver
version, the queue number is split into two part:
tqp_num(range 0~1023) and ext_tqp_num(range 1024~1279).
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Thomas Falcon says:

====================
ibmvnic: Performance improvements and other updates

The first three patches utilize a hypervisor call allowing multiple
TX and RX buffer replenishment descriptors to be sent in one operation,
which significantly reduces hypervisor call overhead. The xmit_more
and Byte Queue Limit API's are leveraged to provide this support
for TX descriptors.

The subsequent two patches remove superfluous code and members in
TX completion handling function and TX buffer structure, respectively,
and remove unused routines.

Finally, four patches which ensure that device queue memory is
cache-line aligned, resolving slowdowns observed in PCI traces,
as well as optimize the driver's NAPI polling function and
to RX buffer replenishment are provided by Dwip Banerjee.

This series provides significant performance improvements, allowing
the driver to fully utilize 100Gb NIC's.
====================

Link: https://lore.kernel.org/r/1605748345-32062-1-git-send-email-tlfalcon@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce the amount of time spent replenishing RX buffers by only doing
so once available buffers has fallen under a certain threshold, in this
case half of the total number of buffers, or if the polling loop exits
before the packets processed is less than its budget. Non-exhaustion of
NAPI budget implies lower incoming packet pressure, allowing the leeway
to refill the buffers in preparation for any impending burst.
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Take advantage of the additional optimizations in netdev_alloc_skb when
allocating socket buffers to be used for packet reception.
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the current NAPI polling loop exits without completing it's
budget, only re-enable interrupts if there are no entries remaining
in the queue and napi_complete_done is successful. If there are entries
remaining on the queue that were missed, restart the polling loop.
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

PCI bus slowdowns were observed on IBM VNIC devices as a result
of partial cache line writes and non-cache aligned full cache line writes.
Ensure that packet data buffers are cache-line aligned to avoid these
slowdowns.
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It is not longer used, so remove it.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unused and superfluous code and members in
existing TX implementation and data structures.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Include support for the xmit_more feature utilizing the
H_SEND_SUB_CRQ_INDIRECT hypervisor call which allows the sending
of multiple subordinate Command Response Queue descriptors in one
hypervisor call via a DMA-mapped buffer. This update reduces hypervisor
calls and thus hypervisor call overhead per TX descriptor.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Utilize the H_SEND_SUB_CRQ_INDIRECT hypervisor call to send
multiple RX buffer descriptors to the device in one hypervisor
call operation. This change will reduce the number of hypervisor
calls and thus hypervisor call overhead needed to transmit
RX buffer descriptors to the device.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch introduces the infrastructure to send batched subordinate
Command Response Queue descriptors, which are used by the ibmvnic
driver to send TX frame and RX buffer descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: add a driver shutdown callback

The final patch in this series adds a driver shutdown callback for
the IPA driver.  The patches leading up to that address some issues
encountered while ensuring that callback worked as expected:
  - The first just reports a little more information when channels
    or event rings are in unexpected states
  - The second patch recognizes a condition where an as-yet-unused
    channel does not require a reset during teardown
  - The third patch explicitly ignores a certain error condition,
    because it can't be avoided, and is harmless if it occurs
  - The fourth properly handles requests to retry a channel HALT
    request
  - The fifth makes a second attempt to stop modem activity during
    shutdown if it's busy

The shutdown callback is implemented by calling the existing remove
callback function (reporting if that returns an error).
====================

Link: https://lore.kernel.org/r/20201119224929.23819-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A system shutdown can happen at essentially any time, and it's
possible that the IPA driver is busy when a shutdown is underway.
IPA hardware accesses IMEM and SMEM memory regions using an IOMMU,
and at some point during shutdown, needed I/O mappings could become
invalid.  This could be disastrous for any "in flight" IPA activity.

Avoid this by defining a new driver shutdown callback that stops all
IPA activity and cleanly shuts down the driver.  It merely calls the
driver's existing remove callback, reporting the error if it returns
one.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The IPA driver remove callback, ipa_remove(), calls ipa_modem_stop()
if the setup stage of initialization is complete.  If a concurrent
call to ipa_modem_start() or ipa_modem_stop() has begin but not
completed, ipa_modem_stop() can return an error (-EBUSY).

The next patch adds a driver shutdown callback, which will simply
call ipa_remove().  We really want our shutdown callback to clean
things up.  So add a single retry to the ipa_modem_stop() call in
ipa_remove() after a short (millisecond) delay.  This offers no
guarantee the shutdown will complete successfully, but we'll at
least try a little harder before giving up.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When stopping an AP RX channel, there can be a transient period
while the channel enters STOP_IN_PROC state before reaching the
final STOPPED state.  In that case we make another attempt to stop
the channel.

Similarly, when stopping a modem channel (using a GSI generic
command issued from the AP), it's possible that multiple attempts
will be required before the channel reaches STOPPED state.

Add a field to the GSI structure to record an errno representing the
result code provided when a generic command completes.  If the
result learned in gsi_isr_gp_int1() is RETRY, record -EAGAIN in the
result code, otherwise record 0 for success, or -EIO for any other
result.

If we time out nf gsi_generic_command() waiting for the command to
complete, return -ETIMEDOUT (as before).  Otherwise return the
result stashed by gsi_isr_gp_int1().

Add a loop in gsi_modem_channel_halt() to reissue the HALT command
if the result code indicates -EAGAIN.  Limit this to 10 retries
(after the initial attempt).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

IPA v4.2 has a hardware quirk that requires the AP to allocate GSI
channels for the modem to use.  It is recommended that these modem
channels get stopped (with a HALT generic command) by the AP when
its IPA driver gets removed.

The AP has no way of knowing the current state of a modem channel.
So when the IPA driver issues a HALT command it's possible the
channel is not running, and in that case we get an error indication.
This error simply means we didn't need to stop the channel, so we
can ignore it.

This patch adds an explanation for this situation, and arranges for
this condition to *not* report an error message.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>