- 25 Nov, 2014 20 commits
-
-
Hans Verkuil authored
Document that drivers can access/modify the buffer contents in buf_prepare and buf_finish. That was not clearly stated before. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
videobuf2 requires drivers to give back ownership of all queue buffers in the stop_streaming operation, as well as in the start_streaming operation in case of failure. Mark all queued buffers as done in the error or queued state. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
This brings the function name in line with the V4L2 API terminology and allows removing the duplicate queue type check. Signed-off-by:
-
Laurent Pinchart authored
This brings the function name in line with the V4L2 API terminology. Signed-off-by:
-
Laurent Pinchart authored
When releasing the file handle the driver calls the vb2_queue_release which turns the stream off. There's thus no need to turn the stream off explicitly beforehand. Signed-off-by:
-
Laurent Pinchart authored
To work propertly the videobuf2 core code needs to be in charge of stream start/stop control. Implement the start_streaming and stop_streaming vb2 operations and move video enable/disable code to them. Signed-off-by:
-
Laurent Pinchart authored
Factorize the container_of() call into an inline function and update callers. Signed-off-by:
-
Laurent Pinchart authored
In order to make use of the vb2 queue start/stop_streaming operations the video and queue enable/disable operations need to be split, as the vb2 queue will need to enable and disable video instead of the other way around. Also move buffer queue disable outside of uvc_video_resume() to remove all queue disable operations out of uvc_video.c. Signed-off-by:
-
Laurent Pinchart authored
The driver doesn't support interlaced video, set field to V4L2_FIELD_NONE for all vb2 buffers. Signed-off-by:
-
Laurent Pinchart authored
Simplify ioctl handling by using video_ioctl2. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_device structure embed a v4l2_prio_state structure used by default for priority handling, but drivers can override that default by setting the video_dev prio pointer to a different v4l2_prio_state instance. However, the VIDIO_G_PRIORITY and VIDIOC_S_PRIORITY implementations use the prio state embedded in v4l2_device unconditionally, breaking drivers that need to override the default. Fix them. Signed-off-by:
-
Takashi Iwai authored
We've got a bug report at disconnecting a Webcam, where the kernel spews warnings like below: WARNING: CPU: 0 PID: 8385 at ../fs/sysfs/group.c:219 sysfs_remove_group+0x87/0x90() sysfs group c0b2350c not found for kobject 'event3' CPU: 0 PID: 8385 Comm: queue2:src Not tainted 3.16.2-1.gdcee397-default #1 Hardware name: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1013 11/12/2004 c08d0705 ddc75cbc c0718c5b ddc75ccc c024b654 c08c6d44 ddc75ce8 000020c1 c08d0705 000000db c03d1ec7 c03d1ec7 00000009 00000000 c0b2350c d62c9064 ddc75cd4 c024b6a3 00000009 ddc75ccc c08c6d44 ddc75ce8 ddc75cfc c03d1ec7 Call Trace: [<c0205ba6>] try_stack_unwind+0x156/0x170 [<c02046f3>] dump_trace+0x53/0x180 [<c0205c06>] show_trace_log_lvl+0x46/0x50 [<c0204871>] show_stack_log_lvl+0x51/0xe0 [<c0205c67>] show_stack+0x27/0x50 [<c0718c5b>] dump_stack+0x3e/0x4e [<c024b654>] warn_slowpath_common+0x84/0xa0 [<c024b6a3>] warn_slowpath_fmt+0x33/0x40 [<c03d1ec7>] sysfs_remove_group+0x87/0x90 [<c05a2c54>] device_del+0x34/0x180 [<c05e3989>] evdev_disconnect+0x19/0x50 [<c05e06fa>] __input_unregister_device+0x9a/0x140 [<c05e0845>] input_unregister_device+0x45/0x80 [<f854b1d6>] uvc_delete+0x26/0x110 [uvcvideo] [<f84d66f8>] v4l2_device_release+0x98/0xc0 [videodev] [<c05a25bb>] device_release+0x2b/0x90 [<c04ad8bf>] kobject_cleanup+0x6f/0x1a0 [<f84d5453>] v4l2_release+0x43/0x70 [videodev] [<c0372f31>] __fput+0xb1/0x1b0 [<c02650c1>] task_work_run+0x91/0xb0 [<c024d845>] do_exit+0x265/0x910 [<c024df64>] do_group_exit+0x34/0xa0 [<c025a76f>] get_signal_to_deliver+0x17f/0x590 [<c0201b6a>] do_signal+0x3a/0x960 [<c02024f7>] do_notify_resume+0x67/0x90 [<c071ebb5>] work_notifysig+0x30/0x3b [<b7739e60>] 0xb7739e5f ---[ end trace b1e56095a485b631 ]--- The cause is that uvc_status_cleanup() is called after usb_put_*() in uvc_delete(). usb_put_*() removes the sysfs parent and eventually removes the children recursively, so the later device_del() can't find its sysfs. The fix is simply rearrange the call orders in uvc_delete() so that the child is removed before the parent. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=897736Reported-and-tested-by:Martin Pluskal <mpluskal@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Philipp Zabel authored
This patch adds a quirk to force Y8 pixel format even if the camera reports half-width YUYV. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The v4l2_ctrl_check() helper function is now only used in cx2341x. Move it there and make it static. Signed-off-by:
-
Hans Verkuil authored
For some unknown reason several control prototypes where in v4l2-common.c instead of in v4l2-ctrls.h. Move them and document them. Signed-off-by:
-
Hans Verkuil authored
Several control helper functions are no longer needed since most drivers are now converted to the control framework. So we can delete them. Signed-off-by:
-
Hans Verkuil authored
These days vdev->v4l2_dev must always be set. This means that some old code that still tests for a NULL vdev->v4l2_dev can be removed or simplified. Signed-off-by:
-
Hans Verkuil authored
Never use sg++, always use sg = sg_next(sg). Scatterlist entries can be combined if the memory is contiguous but sg++ won't know about that. As far as I can tell cx88 and ivtv are really broken because of this, and bttv and cx25821 are OK because vb1 doesn't combine scatterlist entries. But regardless, sg++ should never be used, only sg_next is safe. Signed-off-by:
-
Prabhakar Lad authored
Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The omap2 media driver got removed. Remove a left-over for tcm825x driver that were also at omap2 tree. Signed-off-by:
-
- 21 Nov, 2014 13 commits
-
-
Christian Resell authored
Simple style fix (checkpatch.pl: "space prohibited before that ','"). For the eudyptula challenge (http://eudyptula-challenge.org/). Signed-off-by:
Christian F. Resell <christian.resell@gmail.com> Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Andreas Ruprecht authored
In smipcie.c, the function i2c_bit_add_bus() is called. This function is defined by the I2C bit-banging interfaces enabled with CONFIG_I2C_ALGOBIT. As there was no dependency in Kconfig, CONFIG_I2C_ALGOBIT could be set to "m" while CONFIG_DVB_SMIPCIE was set to "y", resulting in a build error due to an undefined reference. This patch adds the dependency on CONFIG_I2C_ALGOBIT in Kconfig by selecting it when CONFIG_DVB_SMIPCIE is selected. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Load SDR sub-driver in order to support SDR for devices having this tuner too. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
That logic was duplicated from rtl2832_sdr.h in order to avoid hard dependency for staging directory. rtl2832_sdr is moved to media, so we could remove that code now. Signed-off-by:
-
Antti Palosaari authored
Better to rename tuner I2C to something which clearly says it is for tuner as there is now multiple different I2C clients used. Signed-off-by:
-
Antti Palosaari authored
There is RTL2832P devices having extra MN88473 demodulator. This patch add support for such configuration. Logically MN88473 slave demodulator is connected to RTL2832 master demodulator, both I2C bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P chips. Chip version RTL2832P has extra TS interface for connecting slave demodulator. Signed-off-by:
-
Antti Palosaari authored
There is RTL2832P devices having extra MN88472 demodulator. This patch add support for such configuration. Logically MN88472 slave demodulator is connected to RTL2832 master demodulator, both I2C bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P chips. Chip version RTL2832P has extra TS interface for connecting slave demodulator. Signed-off-by:
-
Antti Palosaari authored
Implement partial PIP mode to carry TS from slave demodulator, through that master demodulator. RTL2832 demod has TS input interface to connected another demodulator TS output. Signed-off-by:
-
Hans Verkuil authored
The omap2 camera driver and the tcm825x sensor driver have been deprecated for a year and are now being removed. They are unmaintained and they use an internal API that has long since been superseded by a much better API. Worse, that internal API has been abused by out-of-kernel trees (i.MX6). In addition, Sakari stated that these drivers have never been in a usable state in the mainline kernel due to missing platform data. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Cc: David Cohen <dacohen@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The omap2 camera driver has been deprecated for a year and is now going to be removed. It is unmaintained and it uses an internal API that has long since been superseded by a much better API. Worse, that internal API has been abused by out-of-kernel trees (i.MX6). In addition, Sakari stated that these drivers have never been in a usable state in the mainline kernel due to missing platform data. Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: David Cohen <dacohen@gmail.com> Signed-off-by:
-
- 14 Nov, 2014 7 commits
-
-
Nibble Max authored
DVBSky T982 DVB-T2/T/C dual PCIe card: 1>dvb frontend: SI2158A20(tuner),SI2168A30(demod) 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode) 3>rc: cx23885 integrated. Signed-off-by:
Nibble Max <nibble.max@gmail.com> Reviewed-by:
-
Wilson Michaels authored
This patch adds "lgdt330x" device name i2c_devs array used for debugging Signed-off-by:
Wilson Michaels <thebitpit@earthlink.net> Signed-off-by:
-
Prabhakar Lad authored
this patch adds support for using vb2_start_streaming_called() for cx88-blackbird driver. Signed-off-by:
-
Prabhakar Lad authored
this patch adds support for using vb2_start_streaming_called() for vivid driver. Signed-off-by:
-
Sebastian Reichel authored
Remove unreferenced members from the platform data's structure. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Sebastian Reichel authored
This updates platform data related to Si4713, which has been updated to be compatible with DT interface. Signed-off-by:
-
Sebastian Reichel authored
This patch adds the DT bindings documentation for Silicon Labs Si4713 FM radio transmitter. Signed-off-by:
-
