1. 10 Nov, 2016 6 commits
    • Jens Axboe's avatar
      block: add scalable completion tracking of requests · cf43e6be
      Jens Axboe authored
      For legacy block, we simply track them in the request queue. For
      blk-mq, we track them on a per-sw queue basis, which we can then
      sum up through the hardware queues and finally to a per device
      state.
      
      The stats are tracked in, roughly, 0.1s interval windows.
      
      Add sysfs files to display the stats.
      
      The feature is off by default, to avoid any extra overhead. In-kernel
      users of it can turn it on by setting QUEUE_FLAG_STATS in the queue
      flags. We currently don't turn it on if someone just reads any of
      the stats files, that is something we could add as well.
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      cf43e6be
    • Tejun Heo's avatar
      block: cfq_cpd_alloc() should use @gfp · ebc4ff66
      Tejun Heo authored
      cfq_cpd_alloc() which is the cpd_alloc_fn implementation for cfq was
      incorrectly hard coding GFP_KERNEL instead of using the mask specified
      through the @gfp parameter.  This currently doesn't cause any actual
      issues because all current callers specify GFP_KERNEL.  Fix it.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Fixes: e4a9bde9 ("blkcg: replace blkcg_policy->cpd_size with ->cpd_alloc/free_fn() methods")
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      ebc4ff66
    • Christoph Hellwig's avatar
      nvme: don't pass the full CQE to nvme_complete_async_event · 7bf58533
      Christoph Hellwig authored
      We only need the status and result fields, and passing them explicitly
      makes life a lot easier for the Fibre Channel transport which doesn't
      have a full CQE for the fast path case.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      7bf58533
    • Christoph Hellwig's avatar
      nvme: introduce struct nvme_request · d49187e9
      Christoph Hellwig authored
      This adds a shared per-request structure for all NVMe I/O.  This structure
      is embedded as the first member in all NVMe transport drivers request
      private data and allows to implement common functionality between the
      drivers.
      
      The first use is to replace the current abuse of the SCSI command
      passthrough fields in struct request for the NVMe command passthrough,
      but it will grow a field more fields to allow implementing things
      like common abort handlers in the future.
      
      The passthrough commands are handled by having a pointer to the SQE
      (struct nvme_command) in struct nvme_request, and the union of the
      possible result fields, which had to be turned from an anonymous
      into a named union for that purpose.  This avoids having to pass
      a reference to a full CQE around and thus makes checking the result
      a lot more lightweight.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      d49187e9
    • Arnd Bergmann's avatar
      skd: fix function prototype · 41c9499b
      Arnd Bergmann authored
      Building with W=1 shows a harmless warning for the skd driver:
      
      drivers/block/skd_main.c:2959:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]
      
      This changes the prototype to the expected formatting.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      41c9499b
    • Arnd Bergmann's avatar
      skd: fix msix error handling · 3bc8492f
      Arnd Bergmann authored
      As reported by gcc -Wmaybe-uninitialized, the cleanup path for
      skd_acquire_msix tries to free the already allocated msi-x vectors
      in reverse order, but the index variable may not have been
      used yet:
      
      drivers/block/skd_main.c: In function ‘skd_acquire_irq’:
      drivers/block/skd_main.c:3890:8: error: ‘i’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
      
      This changes the failure path to skip releasing the interrupts
      if we have not started requesting them yet.
      
      Fixes: 180b0ae7 ("skd: use pci_alloc_irq_vectors")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      3bc8492f
  2. 09 Nov, 2016 1 commit
  3. 08 Nov, 2016 3 commits
  4. 07 Nov, 2016 1 commit
    • Christoph Hellwig's avatar
      pktcdvd: don't scribble over the bvec array · feebd568
      Christoph Hellwig authored
      Hi Peter, hi Jens,
      
      I've been looking over the multi page bio vec work again recently, and
      one of the stumbling blocks is raw biovec access in the pktcdvd.
      
      The first issue is that it directly sets up the page and offset pointers
      in the biovec just before calling bio_add_page.  As bio_add_page already
      does the setup it's trivial to just switch it to stack variables for the
      arguments.
      
      The second issue is the copy code in pkt_make_local_copy, which
      effectively is an opencoded version of bio_copy_data except that it
      skips pages that already are the same in the ѕource and destination.
      But we look at the only calleer we just set up the bio using bio_add_page
      to point exactly to the page array that pkt_make_local_copy compares,
      so the pages will always be the same and we can just remove this function.
      
      Note that all this is done based on code inspection, I don't have any
      packet writing hardware myself.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      feebd568
  5. 06 Nov, 2016 1 commit
    • Gabriel Krisman Bertazi's avatar
      blk-mq: Always schedule hctx->next_cpu · c02ebfdd
      Gabriel Krisman Bertazi authored
      Commit 0e87e58b ("blk-mq: improve warning for running a queue on the
      wrong CPU") attempts to avoid triggering the WARN_ON in
      __blk_mq_run_hw_queue when the expected CPU is dead.  Problem is, in the
      last batch execution before round robin, blk_mq_hctx_next_cpu can
      schedule a dead CPU and also update next_cpu to the next alive CPU in
      the mask, which will trigger the WARN_ON despite the previous
      workaround.
      
      The following patch fixes this scenario by always scheduling the value
      in hctx->next_cpu.  This changes the moment when we round-robin the CPU
      running the hctx, but it really doesn't matter, since it still executes
      BLK_MQ_CPU_WORK_BATCH times in a row before switching to another CPU.
      
      Fixes: 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU")
      Signed-off-by: default avatarGabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      c02ebfdd
  6. 05 Nov, 2016 1 commit
    • Jens Axboe's avatar
      block: add code to track actual device queue depth · d278d4a8
      Jens Axboe authored
      For blk-mq, ->nr_requests does track queue depth, at least at init
      time. But for the older queue paths, it's simply a soft setting.
      On top of that, it's generally larger than the hardware setting
      on purpose, to allow backup of requests for merging.
      
      Fill a hole in struct request with a 'queue_depth' member, that
      drivers can call to more closely inform the block layer of the
      real queue depth.
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      d278d4a8
  7. 04 Nov, 2016 2 commits
    • Shaohua Li's avatar
      blk-mq: immediately dispatch big size request · 600271d9
      Shaohua Li authored
      This is corresponding part for blk-mq. Disk with multiple hardware
      queues doesn't need this as we only hold 1 request at most.
      Signed-off-by: default avatarShaohua Li <shli@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      600271d9
    • Shaohua Li's avatar
      block: immediately dispatch big size request · 50d24c34
      Shaohua Li authored
      Currently block plug holds up to 16 non-mergeable requests. This makes
      sense if the request size is small, eg, reduce lock contention. But if
      request size is big enough, we don't need to worry about lock
      contention. Holding such request makes no sense and it lows the disk
      utilization.
      
      In practice, this improves 10% throughput for my raid5 sequential write
      workload.
      
      The size (128k) is arbitrary right now, but it makes sure lock
      contention is small. This probably could be more intelligent, eg, check
      average request size holded. Since this is mainly for sequential IO,
      probably not worthy.
      
      V2: check the last request instead of the first request, so as long as
      there is one big size request we flush the plug.
      Signed-off-by: default avatarShaohua Li <shli@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      50d24c34
  8. 03 Nov, 2016 1 commit
  9. 02 Nov, 2016 16 commits
  10. 01 Nov, 2016 8 commits