Instead of limiting the setting of the processes limits to current,
relax this to tasks confined by the same profile, as the apparmor
controls for rlimits are at a profile level granularity.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

The "permipc" command is unused and unfinished, remove it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

-ESTALE used to be incorrectly used to indicate a disconnected path, when
name lookup failed.  This was fixed in commit e1b0e444 to correctly return
-EACCESS, but the error to failure message mapping was not correctly updated
to reflect this change.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-By: Steve Beattie <sbeattie@ubuntu.com>

When policy specifies a transition to a profile that is not currently
loaded, it result in exec being denied.  However the failure is not being
audited correctly because the audit code is treating this as an allowed
permission and thus not reporting it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-By: Steve Beattie <sbeattie@ubuntu.com>

Passing a pointer to the dentry name, as a parameter to
process_measurement(), causes a race condition with rename() and
is unnecessary, as the dentry name is already accessible via the
file parameter.

In the normal case, we use the full pathname as provided by
brpm->filename, bprm->interp, or ima_d_path().  Only on ima_d_path()
failure, do we fallback to using the d_name.name, which points
either to external memory or d_iname.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

If the TPM has already been sent a SaveState command before the driver
is loaded it may have problems sending that same command again later.

This issue is seen with the Chromebook Pixel due to a firmware bug in
the legacy mode boot path which is sending the SaveState command
before booting the kernel.  More information is available at
http://crbug.com/203524

This change introduces a retry of the SaveState command in the suspend
path in order to work around this issue.  A future firmware update
should fix this but this is also a trivial workaround in the driver
that has no effect on systems that do not show this problem.

When this does happen the TPM responds with a non-fatal TPM_RETRY code
that is defined in the specification:

  The TPM is too busy to respond to the command immediately, but the
  command could be resubmitted at a later time.  The TPM MAY return
  TPM_RETRY for any command at any time.

It can take several seconds before the TPM will respond again.  I
measured a typical time between 3 and 4 seconds and the timeout is set
at a safe 5 seconds.

It is also possible to reproduce this with commands via /dev/tpm0.
The bug linked above has a python script attached which can be used to
test for this problem.  I tested a variety of TPMs from Infineon,
Nuvoton, Atmel, and STMicro but was only able to reproduce this with
LPC and I2C TPMs from Infineon.

The TPM specification only loosely defines this behavior:

  TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState:
  The TPM MAY declare all preserved values invalid in response to any
  command other than TPM_Init.

  TCG PC Client BIOS Spec 1.21 section 8.3.1.
  After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM
  commands before transitioning to S3 without issuing another
  TPM_SaveState command.

  TCG PC Client TIS 1.21, section 4. Power Management:
  The TPM_SaveState command allows a Static OS to indicate to the TPM
  that the platform may enter a low power state where the TPM will be
  required to enter into the D3 power state.  The use of the term "may"
  is significant in that there is no requirement for the platform to
  actually enter the low power state after sending the TPM_SaveState
  command.  The software may, in fact, send subsequent commands after
  sending the TPM_SaveState command.

Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

Kent Yoder indicated that the code might be a bit clearer with a comment
here, so this patch adds a small explanation of the code.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

As the subject says.
It's probably a good idea to have these fields populated.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

module.h and sched.h were included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

This driver adds support for Infineon's new SLB 9645 TT 1.2 I2C TPMs,
which supports clockstretching, combined reads and a bus speed of
up to 400khz. The device also has a new device id.

The driver works now also fine with device trees, so you can
instantiate your device by adding:
 +       tpm {
 +               compatible = "infineon,slb9645tt";
 +               reg = <0x20>;
 +       };
 for SLB 9645 devices or

 +       tpm {
 +               compatible = "infineon,slb9635tt";
 +               reg = <0x20>;
 +       };
 for SLB 9635 devices

to your device tree.
tpm_i2c_infineon is also retained as a compatible id as a fallback to
slb9635 protocol.

The driver was tested on Beaglebone.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.

Thanks to Julia Lawall for automating the conversion.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

 Ensure that the 'version' string includes a NULL terminator after its
copied out of the acpi table.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

As reported for linux-next: Tree for Apr 2 (smack)
Add the required include for smackfs.c
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>

I had the following problem reported a while back. If you mount the
same filesystem twice using NFSv4 with different contexts, then the
second context= option is ignored. For instance:

    # mount server:/export /mnt/test1
    # mount server:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
    # ls -dZ /mnt/test1
    drwxrwxrwt. root root system_u:object_r:nfs_t:s0       /mnt/test1
    # ls -dZ /mnt/test2
    drwxrwxrwt. root root system_u:object_r:nfs_t:s0       /mnt/test2

When we call into SELinux to set the context of a "cloned" superblock,
it will currently just bail out when it notices that we're reusing an
existing superblock. Since the existing superblock is already set up and
presumably in use, we can't go overwriting its context with the one from
the "original" sb. Because of this, the second context= option in this
case cannot take effect.

This patch fixes this by turning security_sb_clone_mnt_opts into an int
return operation. When it finds that the "new" superblock that it has
been handed is already set up, it checks to see whether the contexts on
the old superblock match it. If it does, then it will just return
success, otherwise it'll return -EBUSY and emit a printk to tell the
admin why the second mount failed.

Note that this patch may cause casualties. The NFSv4 code relies on
being able to walk down to an export from the pseudoroot. If you mount
filesystems that are nested within one another with different contexts,
then this patch will make those mounts fail in new and "exciting" ways.

For instance, suppose that /export is a separate filesystem on the
server:

    # mount server:/ /mnt/test1
    # mount salusa:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
    mount.nfs: an incorrect mount option was specified

...with the printk in the ring buffer. Because we *might* eventually
walk down to /mnt/test1/export, the mount is denied due to this patch.
The second mount needs the pseudoroot superblock, but that's already
present with the wrong context.

OTOH, if we mount these in the reverse order, then both mounts work,
because the pseudoroot superblock created when mounting /export is
discarded once that mount is done. If we then however try to walk into
that directory, the automount fails for the similar reasons:

    # cd /mnt/test1/scratch/
    -bash: cd: /mnt/test1/scratch: Device or resource busy

The story I've gotten from the SELinux folks that I've talked to is that
this is desirable behavior. In SELinux-land, mounting the same data
under different contexts is wrong -- there can be only one.

Cc: Steve Dickson <steved@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Allow BPF_XOR based ALU instructions.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>

This patch fixes kernel Oops because of wrong common_audit_data type
in smack_inode_unlink() and smack_inode_rmdir().

When SMACK security module is enabled and SMACK logging is on (/smack/logging
is not zero) and you try to delete the file which
1) you cannot delete due to SMACK rules and logging of failures is on
or
2) you can delete and logging of success is on,

you will see following:

	Unable to handle kernel NULL pointer dereference at virtual address 000002d7

	[<...>] (strlen+0x0/0x28)
	[<...>] (audit_log_untrustedstring+0x14/0x28)
	[<...>] (common_lsm_audit+0x108/0x6ac)
	[<...>] (smack_log+0xc4/0xe4)
	[<...>] (smk_curacc+0x80/0x10c)
	[<...>] (smack_inode_unlink+0x74/0x80)
	[<...>] (security_inode_unlink+0x2c/0x30)
	[<...>] (vfs_unlink+0x7c/0x100)
	[<...>] (do_unlinkat+0x144/0x16c)

The function smack_inode_unlink() (and smack_inode_rmdir()) need
to log two structures of different types. First of all it does:

	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_DENTRY);
	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);

This will set common audit data type to LSM_AUDIT_DATA_DENTRY
and store dentry for auditing (by function smk_curacc(), which in turn calls
dump_common_audit_data(), which is actually uses provided data and logs it).

	/*
	 * You need write access to the thing you're unlinking
	 */
	rc = smk_curacc(smk_of_inode(ip), MAY_WRITE, &ad);
	if (rc == 0) {
		/*
		 * You also need write access to the containing directory
		 */

Then this function wants to log anoter data:

		smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
		smk_ad_setfield_u_fs_inode(&ad, dir);

The function sets inode field, but don't change common_audit_data type.

		rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad);
	}

So the dump_common_audit() function incorrectly interprets inode structure
as dentry, and Oops will happen.

This patch reinitializes common_audit_data structures with correct type.
Also I removed unneeded
	smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
initialization, because both dentry and inode pointers are stored
in the same union.
Signed-off-by: Igor Zhbanov <i.zhbanov@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Rule modifications are enabled via /smack/change-rule. Format is as follows:
"Subject Object rwaxt rwaxt"

First two strings are subject and object labels up to 255 characters.
Third string contains permissions to enable.
Fourth string contains permissions to disable.

All unmentioned permissions will be left unchanged.
If no rule previously existed, it will be created.

Targeted for git://git.gitorious.org/smack-next/kernel.gitSigned-off-by: Rafal Krypa <r.krypa@samsung.com>

SMACK_MAGIC moved to a proper place for easy user space access
(i.e. libsmack).
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>

This fixes audit logs for granting or denial of permissions to show
information about transmute bit.

Targeted for git://git.gitorious.org/smack-next/kernel.gitSigned-off-by: Rafal Krypa <r.krypa@samsung.com>

Special file /smack/revoke-subject will silently accept labels that are not
present on the subject label list. Nothing has to be done for such labels,
as there are no rules for them to revoke.

Targeted for git://git.gitorious.org/smack-next/kernel.gitSigned-off-by: Rafal Krypa <r.krypa@samsung.com>

DEFINE_STATIC_SRCU() defines srcu struct and do init at build time.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>

DEFINE_STATIC_SRCU() defines srcu struct and do init at build time.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Sync with Linus.

Linux 3.9-rc2

Pull namespace bugfixes from Eric Biederman:
 "This is three simple fixes against 3.9-rc1.  I have tested each of
  these fixes and verified they work correctly.

  The userns oops in key_change_session_keyring and the BUG_ON triggered
  by proc_ns_follow_link were found by Dave Jones.

  I am including the enhancement for mount to only trigger requests of
  filesystem modules here instead of delaying this for the 3.10 merge
  window because it is both trivial and the kind of change that tends to
  bit-rot if left untouched for two months."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use nd_jump_link in proc_ns_follow_link
  fs: Limit sys_mount to only request filesystem modules (Part 2).
  fs: Limit sys_mount to only request filesystem modules.
  userns: Stop oopsing in key_change_session_keyring

There is a more complete atmel patch-series out by Nick Dyer that fixes
this and other things, but in the meantime this is the minimal thing to
get the touchscreen going on (at least my) Pixel Chromebook.

Not that I want my dirty fingers near that beautiful screen, but it
seems that a non-initialized touchscreen will also end up being a
constant wakeup source, so you have to disable it to go to sleep.  And
it's easier to just fix the initialization sequence.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update proc_ns_follow_link to use nd_jump_link instead of just
manually updating nd.path.dentry.

This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave
Jones and reproduced trivially with mkdir /proc/self/ns/uts/a.

Sigh it looks like the VFS change to require use of nd_jump_link
happend while proc_ns_follow_link was baking and since the common case
of proc_ns_follow_link continued to work without problems the need for
making this change was overlooked.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull btrfs fixes from Chris Mason:
 "These are scattered fixes and one performance improvement.  The
  biggest functional change is in how we throttle metadata changes.  The
  new code bumps our average file creation rate up by ~13% in fs_mark,
  and lowers CPU usage.

  Stefan bisected out a regression in our allocation code that made
  balance loop on extents larger than 256MB."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: improve the delayed inode throttling
  Btrfs: fix a mismerge in btrfs_balance()
  Btrfs: enforce min_bytes parameter during extent allocation
  Btrfs: allow running defrag in parallel to administrative tasks
  Btrfs: avoid deadlock on transaction waiting list
  Btrfs: do not BUG_ON on aborted situation
  Btrfs: do not BUG_ON in prepare_to_reloc
  Btrfs: free all recorded tree blocks on error
  Btrfs: build up error handling for merge_reloc_roots
  Btrfs: check for NULL pointer in updating reloc roots
  Btrfs: fix unclosed transaction handler when the async transaction commitment fails
  Btrfs: fix wrong handle at error path of create_snapshot() when the commit fails
  Btrfs: use set_nlink if our i_nlink is 0

Add basic platform data to get the current upstream driver working
with the 224s touchpad and 1664s touchscreen.
We will be using NULL config so we will use the settings from the
devices' NVRAMs.
Signed-off-by: Benson Leung <bleung@chromium.org>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This same driver can be used by atmel based touchscreens and touchpads
(buttonpads). Platform data may specify a device is a touchpad
using the is_tp flag.

This will cause the driver to perform some touchpad specific
initializations, such as:
  * register input device name "Atmel maXTouch Touchpad" instead of
  Touchscreen.
  * register BTN_LEFT & BTN_TOOL_* event types.
  * register axis resolution (as a fixed constant, for now)
  * register BUTTONPAD property
  * process GPIO buttons using reportid T19

Input event GPIO mapping is done by the platform data key_map array.

key_map[x] should contain the KEY or BTN code to send when processing
GPIOx from T19. To specify a GPIO as not an input source, populate
with KEY_RESERVED, or 0.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull CIFS fixes from Steve French:
 "A small set of cifs fixes which includes one for a recent regression
  in the write path (pointed out by Anton), some fixes for rename
  problems and as promised for 3.9 removing the obsolete sockopt mount
  option (and the accompanying deprecation warning)."

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix missing of oplock_read value in smb30_values structure
  cifs: don't try to unlock pagecache page after releasing it
  cifs: remove the sockopt= mount option
  cifs: Check server capability before attempting silly rename
  cifs: Fix bug when checking error condition in cifs_rename_pending_delete()

Merge misc fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  alpha: boot: fix build breakage introduced by system.h disintegration
  memcg: initialize kmem-cache destroying work earlier
  Randy has moved
  ksm: fix m68k build: only NUMA needs pfn_to_nid
  dmi_scan: fix missing check for _DMI_ signature in smbios_present()
  Revert parts of "hlist: drop the node parameter from iterators"
  idr: remove WARN_ON_ONCE() on negative IDs
  mm/mempolicy.c: fix sp_node_init() argument ordering
  mm/mempolicy.c: fix wrong sp_node insertion
  ipc: don't allocate a copy larger than max
  ipc: fix potential oops when src msg > 4k w/ MSG_COPY