- 04 Jun, 2020 37 commits
-
-
Ritesh Harjani authored
Implement ext4_mb_discard_preallocations_should_retry() which we will need in later patches to add more logic like check for sequence number match to see if we should retry for block allocation or not. There should be no functionality change in this patch. Signed-off-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/1cfae0098d2aa9afbeb59331401258182868c8f2.1589955723.git.riteshh@linux.ibm.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Ritesh Harjani authored
ext4_mb_discard_preallocations() only checks for grp->bb_prealloc_list of every group to discard the group's PA to free up the space if allocation request fails. Consider below race:- Process A Process B 1. allocate blocks 1. Fails block allocation from ext4_mb_regular_allocator() ext4_lock_group() allocated blocks more than ac_o_ex.fe_len ext4_unlock_group() 2. Scans the grp->bb_prealloc_list (under ext4_lock_group()) and find nothing and thus return -ENOSPC. 2. Add the additional blocks to PA list ext4_lock_group() add blocks to grp->bb_prealloc_list ext4_unlock_group() Above race could be avoided if we add those additional blocks to grp->bb_prealloc_list at the same time with block allocation when ext4_lock_group() was still held. With this discard-PA will know if there are actually any blocks which could be freed from the PA Signed-off-by:
-
Eric Biggers authored
No one currently needs EXT4_INODE_CASEFOLD, but add it to keep the EXT4_INODE_* definitions in sync with the EXT4_*_FL definitions. Also make it clearer that the casefold flag is only for directories. Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200510215252.87833-1-ebiggers@kernel.orgSigned-off-by:
-
Eric Whitney authored
The path performing block allocations in ext4_ext_map_blocks() contains code trimming the length of a new extent that is repeated later in the function. This code is both redundant and unnecessary as the exact length of the new extent has already been calculated. Rewrite the instantiation of the map struct in this case to use the available values, avoiding the overhead of unnecessary conversions and improving clarity. Add another map struct instantiation tailored specifically to the separate case for an existing written extent. Remove an old comment that no longer appears applicable to the current code. Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200510155805.18808-1-enwlinux@gmail.comSigned-off-by:
-
Ritesh Harjani authored
ext_debug() msgs could be helpful, provided those could be enabled without recompiling kernel and also if we could selectively enable only required prints for case by case debugging. So make ext_debug() implementation use pr_debug(). Also change ext_debug() to be defined with CONFIG_EXT4_DEBUG. So EXT_DEBUG macro now mostly remain for below 3 functions. ext4_ext_show_path/leaf/move() (whose print msgs use ext_debug() which again could be dynamically enabled using pr_debug()) This also changes the ext_debug() to take inode as a parameter to add inode no. in all of it's msgs. Prints additional info like process name / pid, superblock id etc. This also removes any explicit function names passed in ext_debug(). Since ext_debug() on it's own prints file, func and line no. Signed-off-by:
-
Ritesh Harjani authored
mb_debug() msg had only 1 control level for all type of msgs. And if we enable mballoc_debug then all of those msgs would be enabled. Instead of adding multiple debug levels for mb_debug() msgs, use pr_debug() with which we could have finer control to print msgs at all of different levels (i.e. at file, func, line no.). Also add process name/pid, superblk id, and other info in mb_debug() msg. This also kills the mballoc_debug module parameter, since it is not needed any more. Signed-off-by:
-
Ritesh Harjani authored
Replace EXT_DEBUG with __maybe_unused from inside ext4_ext_handle_unwritten_extents() function. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
ext4_map_blocks() has ext_debug msg early at the start of function. We also get ext_debug msg if we could allocate a block from ext4_ext_map_blocks(). But there is no ext_debug() msg in case of block allocation failure. So add one along with error code. Also add more info in ext_debug() msg like how many blocks were allocated v/s how many were requested in ext4_ext_map_blocks(). Signed-off-by:
-
Ritesh Harjani authored
Simply use BIT() macro for all BH_** state bits instead of open coding it. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
Use task_pid_nr() function instead of current->pid. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
Make sure to check for e4b->bd_info->bb_bitmap == NULL, in mb_cmp_bitmaps() and return if NULL, to avoid possible NULL ptr dereference. Similar to how we do this in other ifdef DOUBLE_CHECK functions. Also remove the BUG_ON() logic if kmalloc() or ext4_read_block_bitmap() fails. We should simply mark grp->bb_bitmap as NULL if above happens. In fact ext4_read_block_bitmap() may even return an error in case of resize ioctl. Hence remove this BUG_ON logic (fstests ext4/032 may trigger this). Link: https://lore.kernel.org/r/9a54f8a696ff17c057cd571be3d15ac3ec1407f1.1589086800.git.riteshh@linux.ibm.comSigned-off-by:
-
Ritesh Harjani authored
This patch implemets mb_group_bb_bitmap_alloc() and mb_group_bb_bitmap_free() function to remove #ifdef DOUBLE_CHECK macro and it's related code from inside ext4_mb_add_groupinfo()/ext4_mb_release(). There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
Change return type of function ext4_mb_use_preallocated() to bool to better reflect what this function can return. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
This patch simplifies error handling logic in ext4_init_mballoc(), by adding all the cleanups at one place at the end of that function. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
Fix few other format specifiers in mb_debug() msgs. As such no other functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
pa->pa_len is an integer. Fix all of the format specifier used in mb_debug() for pa_len to %d instead of %u. As such no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
This patch adds some more debugging mb_debug() msgs to help improve mballoc code debugging. Other than adding more mb_debug() msgs at few more places, there should be no other functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
This factors out ext4_mb_show_pa() function to show all the group's preallocation info. This could be useful info to be added in later patches. There should be no functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
Improve the debugging msg by also printing even if bb_free is 0. Signed-off-by:
-
Theodore Ts'o authored
We can't fail in the truncate path without requiring an fsck. Add work around for this by using a combination of retry loops and the __GFP_NOFAIL flag. From: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Anna Pendleton <pendleton@google.com> Reviewed-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200507175028.15061-1-pendleton@google.comSigned-off-by:
-
Eric Biggers authored
'igrab(d_inode(dentry->d_parent))' without holding dentry->d_lock is broken because without d_lock, d_parent can be concurrently changed due to a rename(). Then if the old directory is immediately deleted, old d_parent->inode can be NULL. That causes a NULL dereference in igrab(). To fix this, use dget_parent() to safely grab a reference to the parent dentry, which pins the inode. This also eliminates the need to use d_find_any_alias() other than for the initial inode, as we no longer throw away the dentry at each step. This is an extremely hard race to hit, but it is possible. Adding a udelay() in between the reads of ->d_parent and its ->d_inode makes it reproducible on a no-journal filesystem using the following program: #include <fcntl.h> #include <unistd.h> int main() { if (fork()) { for (;;) { mkdir("dir1", 0700); int fd = open("dir1/file", O_RDWR|O_CREAT|O_SYNC); write(fd, "X", 1); close(fd); } } else { mkdir("dir2", 0700); for (;;) { rename("dir1/file", "dir2/file"); rmdir("dir1"); } } } Fixes: d59729f4 ("ext4: fix races in ext4_sync_parent()") Cc: stable@vger.kernel.org Signed-off-by: -
Christophe JAILLET authored
s/extnets/extents/ Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200503200647.154701-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Eric Whitney authored
If ext4_ext_convert_to_initialized() fails when called within ext4_ext_handle_unwritten_extents(), immediately error out through the exit point at function end. Fix the error handling in the event ext4_ext_convert_to_initialized() returns 0, which it shouldn't do when converting an existing extent. The current code returns the passed in value of allocated (which is likely non-zero) while failing to set m_flags, m_pblk, and m_len. Signed-off-by:
-
Eric Whitney authored
If the call to ext4_split_convert_extents() fails in the EXT4_GET_BLOCKS_PRE_IO case within ext4_ext_handle_unwritten_extents(), error out through the exit point at function end rather than jumping through an intermediate point. Fix the error handling in the event ext4_split_convert_extents() returns 0, which it shouldn't do when splitting an existing extent. The current code returns the passed in value of allocated (which is likely non-zero) while failing to set m_flags, m_pblk, and m_len. Signed-off-by:
-
Eric Whitney authored
Remove the redundant code assigning values to ext4_map_blocks components in ext4_ext_handle_unwritten_extents() for the EXT4_GET_BLOCKS_CONVERT case, using the code at the function exit instead. Clean up and reorder that code to eliminate more redundancy and improve readability. Signed-off-by:
-
Eric Whitney authored
There's no call to ext4_map_blocks() in the current ext4 code with a flags argument that combines EXT4_GET_BLOCKS_CONVERT and EXT4_GET_BLOCKS_ZERO. Remove the code that corresponds to this case from ext4_ext_handle_unwritten_extents(). Signed-off-by:
-
Harshad Shirwadkar authored
Don't ignore return values from ext4_ext_dirty, since the errors indicate valid failures below Ext4. In all of the other instances of ext4_ext_dirty calls, the error return value is handled in some way. This patch makes those remaining couple of places to handle ext4_ext_dirty errors as well. In case of ext4_split_extent_at(), the ignorance of return value is intentional. The reason is that we are already in error path and there isn't much we can do if ext4_ext_dirty returns error. This patch adds a comment for that case explaining why we ignore the return value. In the longer run, we probably should make sure that errors from other mark_dirty routines are handled as well. Ran gce-xfstests smoke tests and verified that there were no regressions. Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200427013438.219117-2-harshadshirwadkar@gmail.comSigned-off-by:
-
Harshad Shirwadkar authored
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return value may lead ext4 to ignore real failures that would result in corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail as soon as possible and return errors to the caller whenever appropriate. One of the possible scnearios when this bug could affected is that while creating a new inode, its directory entry gets added successfully but while writing the inode itself mark_inode_dirty returns error which is ignored. This would result in inconsistency that the directory entry points to a non-existent inode. Ran gce-xfstests smoke tests and verified that there were no regressions. Signed-off-by:
-
Jeffle Xu authored
Don't pass error pointers to brelse(). commit 7159a986 ("ext4: fix some error pointer dereferences") has fixed some cases, fix the remaining one case. Once ext4_xattr_block_find()->ext4_sb_bread() failed, error pointer is stored in @bs->bh, which will be passed to brelse() in the cleanup routine of ext4_xattr_set_handle(). This will then cause a NULL panic crash in __brelse(). BUG: unable to handle kernel NULL pointer dereference at 000000000000005b RIP: 0010:__brelse+0x1b/0x50 Call Trace: ext4_xattr_set_handle+0x163/0x5d0 ext4_xattr_set+0x95/0x110 __vfs_setxattr+0x6b/0x80 __vfs_setxattr_noperm+0x68/0x1b0 vfs_setxattr+0xa0/0xb0 setxattr+0x12c/0x1a0 path_setxattr+0x8d/0xc0 __x64_sys_setxattr+0x27/0x30 do_syscall_64+0x60/0x250 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this case, @bs->bh stores '-EIO' actually. Fixes: fb265c9c ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Signed-off-by:
Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org # 2.6.19 Reviewed-by:
-
Jan Kara authored
When we are evicting inode with journalled data, we may race with transaction commit in the following way: CPU0 CPU1 jbd2_journal_commit_transaction() evict(inode) inode_io_list_del() inode_wait_for_writeback() process BJ_Forget list __jbd2_journal_insert_checkpoint() __jbd2_journal_refile_buffer() __jbd2_journal_unfile_buffer() if (test_clear_buffer_jbddirty(bh)) mark_buffer_dirty(bh) __mark_inode_dirty(inode) ext4_evict_inode(inode) frees the inode This results in use-after-free issues in the writeback code (or the assertion added in the previous commit triggering). Fix the problem by removing inode from writeback lists once all the page cache is evicted and so inode cannot be added to writeback lists again. Signed-off-by: -
Jan Kara authored
Ext4 needs to remove inode from writeback lists after it is out of visibility of its journalling machinery (which can still dirty the inode). Export inode_io_list_del() for it. Signed-off-by:
-
Xiyu Yang authored
ext4_orphan_get() invokes ext4_read_inode_bitmap(), which returns a reference of the specified buffer_head object to "bitmap_bh" with increased refcnt. When ext4_orphan_get() returns, local variable "bitmap_bh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of ext4_orphan_get(). When ext4_iget() fails, the function forgets to decrease the refcnt increased by ext4_read_inode_bitmap(), causing a refcnt leak. Fix this issue by calling brelse() when ext4_iget() fails. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/1587618568-13418-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
Harshad Shirwadkar authored
If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned (-1) resulting in illegal memory accesses. Although there is no consistent repro, we see that generic/019 sometimes crashes because of this bug. Ran gce-xfstests smoke and verified that there were no regressions. Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: fs/ext4/extents_status.c:1057:5-28: WARNING: Comparison to bool fs/ext4/inode.c:2314:18-24: WARNING: Comparison to bool Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Eric Whitney authored
As new ext4_map_blocks() flags have been added, not all have gotten flag bit to string translations to make tracepoint output more readable. Fix that, and go one step further by adding a translation for the EXT4_EX_NOCACHE flag as well. The EXT4_EX_FORCE_CACHE flag can never be set in a tracepoint in the current code, so there's no need to bother with a translation for it right now. Signed-off-by:
-
Eric Whitney authored
The eofblocks code was removed in the 5.7 release by "ext4: remove EOFBLOCKS_FL and associated code" (4337ecd1). The ext4_map_blocks() flag used to trigger it can now be removed as well. Signed-off-by:
-
Carlos Guerrero Álvarez authored
Fixed an if statement where braces were not needed. Link: https://lore.kernel.org/r/20200416141456.1089-1-carlosteniswarrior@gmail.comSigned-off-by:
Carlos Guerrero Álvarez <carlosteniswarrior@gmail.com> Signed-off-by:
-
- 14 May, 2020 1 commit
-
-
Kaixu Xia authored
We can use the ext4_has_feature_bigalloc() function directly to check bigalloc feature and the variable has_bigalloc is reduncant, so remove it. Signed-off-by:
Kaixu Xia <kaixuxia@tencent.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1586935542-29588-1-git-send-email-kaixuxia@tencent.comSigned-off-by:
-
- 07 May, 2020 1 commit
-
-
Kaixu Xia authored
The DIOREAD_NOLOCK flag has been cleared when doing the test_opt that is meaningless, so remove the unnecessary test_opt for DIOREAD_NOLOCK. Signed-off-by:
-
- 03 May, 2020 1 commit
-
-
Linus Torvalds authored
-
