Implement rx_handler to read the information of the rx descriptor,
thereby checking the packet accordingly and storing the packet
in the socket buffer to complete the reception of the packet.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-8-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-7-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement rtase_hw_config to set default hardware settings, including
setting interrupt mitigation, tx/rx DMA burst, interframe gap time,
rx packet filter, near fifo threshold and fill descriptor ring and
tally counter address, and enable flow control. When filling the
rx descriptor ring, the first group of queues needs to be processed
separately because the positions of the first group of queues are not
regular with other subsequent groups. The other queues are all newly
added features, but we want to retain the original design. So they were
not put together.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-6-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

1. Implement rtase_interrupt to handle txQ0/rxQ0, txQ4~txQ7 interrupts,
and implement rtase_q_interrupt to handle txQ1/rxQ1, txQ2/rxQ2 and
txQ3/rxQ3 interrupts.
2. Implement rtase_poll to call ring_handler to process the tx or
rx packet of each ring. If the returned value is budget,it means that
there is still work of a certain ring that has not yet been completed.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-5-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement the rtase_down function to disable hardware setting
and interrupt and clear descriptor ring.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-4-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement the .ndo_open function to set default hardware settings
and initialize the descriptor ring and interrupts. Among them,
when requesting interrupt, because the first group of interrupts
needs to process more events, the overall structure and interrupt
handler will be different from other groups of interrupts, so it
needs to be handled separately. The first set of interrupt handlers
need to handle the interrupt status of RXQ0 and TXQ0, TXQ4~7,
while other groups of interrupt handlers will handle the interrupt
status of RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 according to the
interrupt vector.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-3-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for a pci table in this module, and implement pci_driver
function to initialize this driver, remove this driver, or shutdown
this driver.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-2-justinlai0215@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/phy/phy_device.c
  2560db6e ("net: phy: Fix missing of_node_put() for leds")
  1dce520a ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au

Adjacent changes:

drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
  858430db ("net: xilinx: axienet: Fix race in axienet_stop")
  76abb5d6 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fill another small gap in the nftables spec so that it is possible to
dump a tailscale ruleset with:

  tools/net/ynl/cli.py --spec \
     Documentation/netlink/specs/nftables.yaml --dump getrule

This adds support for the 'target' expression.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904091024.3138-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 6f8b12d6 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.

This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.

The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.

Before this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647

After this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range

Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:

include/linux/netdevice.h:      unsigned int            tx_queue_len;

And has an overflow check:

dev_change_tx_queue_len(..., unsigned long new_len):

  if (new_len != (unsigned int)new_len)
          return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, bluetooth and wireless.

  No known regressions at this point. Another calm week, but chances are
  that has more to do with vacation season than the quality of our work.

  Current release - new code bugs:

   - smc: prevent NULL pointer dereference in txopt_get

   - eth: ti: am65-cpsw: number of XDP-related fixes

  Previous releases - regressions:

   - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
     BREDR/LE", it breaks existing user space

   - Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
     later problems with suspend

   - can: mcp251x: fix deadlock if an interrupt occurs during
     mcp251x_open

   - eth: r8152: fix the firmware communication error due to use of bulk
     write

   - ptp: ocp: fix serial port information export

   - eth: igb: fix not clearing TimeSync interrupts for 82580

   - Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo

  Previous releases - always broken:

   - eth: intel: fix crashes and bugs when reconfiguration and resets
     happening in parallel

   - wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()

  Misc:

   - docs: netdev: document guidance on cleanup.h"

* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  ila: call nf_unregister_net_hooks() sooner
  tools/net/ynl: fix cli.py --subscribe feature
  MAINTAINERS: fix ptp ocp driver maintainers address
  selftests: net: enable bind tests
  net: dsa: vsc73xx: fix possible subblocks range of CAPT block
  sched: sch_cake: fix bulk flow accounting logic for host fairness
  docs: netdev: document guidance on cleanup.h
  net: xilinx: axienet: Fix race in axienet_stop
  net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
  r8152: fix the firmware doesn't work
  fou: Fix null-ptr-deref in GRO.
  bareudp: Fix device stats updates.
  net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
  bpf, net: Fix a potential race in do_sock_getsockopt()
  net: dqs: Do not use extern for unused dql_group
  sch/netem: fix use after free in netem_dequeue
  usbnet: modern method to get random MAC
  MAINTAINERS: wifi: cw1200: add net-cw1200.h
  ice: do not bring the VSI up, if it was down before the XDP setup
  ice: remove ICE_CFG_BUSY locking from AF_XDP code
  ...

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes (including some of the widespread
  work on fixing missing ID tables for module autoloading and the revert
  of some problematic PM work in spi-rockchip), some improvements to the
  MAINTAINERS information for the NXP drivers and the addition of a new
  device ID to spidev"

* tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers
  MAINTAINERS: SPI: Add freescale lpspi maintainer information
  spi: spi-fsl-lpspi: Fix off-by-one in prescale max
  spi: spidev: Add missing spi_device_id for jg10309-01
  spi: bcm63xx: Enable module autoloading
  spi: intel: Add check devm_kasprintf() returned value
  spi: spidev: Add an entry for elgin,jg10309-01
  spi: rockchip: Resolve unbalanced runtime PM / system PM handling

Merge tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix from Doug Anderson for a missing stub, required to fix the build
  for some newly added users of devm_regulator_bulk_get_const() in
  !REGULATOR configurations"

* tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR

Pull Rust fixes from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Fix builds for nightly compiler users now that 'new_uninit' was
     split into new features by using an alternative approach for the
     code that used what is now called the 'box_uninit_write' feature

   - Allow the 'stable_features' lint to preempt upcoming warnings about
     them, since soon there will be unstable features that will become
     stable in nightly compilers

   - Export bss symbols too

  'kernel' crate:

   - 'block' module: fix wrong usage of lockdep API

  'macros' crate:

   - Provide correct provenance when constructing 'THIS_MODULE'

  Documentation:

   - Remove unintended indentation (blockquotes) in generated output

   - Fix a couple typos

  MAINTAINERS:

   - Remove Wedson as Rust maintainer

   - Update Andreas' email"

* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
  MAINTAINERS: update Andreas Hindborg's email address
  MAINTAINERS: Remove Wedson as Rust maintainer
  rust: macros: provide correct provenance when constructing THIS_MODULE
  rust: allow `stable_features` lint
  docs: rust: remove unintended blockquote in Quick Start
  rust: alloc: eschew `Box<MaybeUninit<T>>::write`
  rust: kernel: fix typos in code comments
  docs: rust: remove unintended blockquote in Coding Guidelines
  rust: block: fix wrong usage of lockdep API
  rust: kbuild: fix export of bss symbols

Pull tracing fixes from Steven Rostedt:

 - Fix adding a new fgraph callback after function graph tracing has
   already started.

   If the new caller does not initialize its hash before registering the
   fgraph_ops, it can cause a NULL pointer dereference. Fix this by
   adding a new parameter to ftrace_graph_enable_direct() passing in the
   newly added gops directly and not rely on using the fgraph_array[],
   as entries in the fgraph_array[] must be initialized.

   Assign the new gops to the fgraph_array[] after it goes through
   ftrace_startup_subops() as that will properly initialize the
   gops->ops and initialize its hashes.

 - Fix a memory leak in fgraph storage memory test.

   If the "multiple fgraph storage on a function" boot up selftest fails
   in the registering of the function graph tracer, it will not free the
   memory it allocated for the filter. Break the loop up into two where
   it allocates the filters first and then registers the functions where
   any errors will do the appropriate clean ups.

 - Only clear the timerlat timers if it has an associated kthread.

   In the rtla tool that uses timerlat, if it was killed just as it was
   shutting down, the signals can free the kthread and the timer. But
   the closing of the timerlat files could cause the hrtimer_cancel() to
   be called on the already freed timer. As the kthread variable is is
   set to NULL when the kthreads are stopped and the timers are freed it
   can be used to know not to call hrtimer_cancel() on the timer if the
   kthread variable is NULL.

 - Use a cpumask to keep track of osnoise/timerlat kthreads

   The timerlat tracer can use user space threads for its analysis. With
   the killing of the rtla tool, the kernel can get confused between if
   it is using a user space thread to analyze or one of its own kernel
   threads. When this confusion happens, kthread_stop() can be called on
   a user space thread and bad things happen. As the kernel threads are
   per-cpu, a bitmask can be used to know when a kernel thread is used
   or when a user space thread is used.

 - Add missing interface_lock to osnoise/timerlat stop_kthread()

   The stop_kthread() function in osnoise/timerlat clears the osnoise
   kthread variable, and if it was a user space thread does a put_task
   on it. But this can race with the closing of the timerlat files that
   also does a put_task on the kthread, and if the race happens the task
   will have put_task called on it twice and oops.

 - Add cond_resched() to the tracing_iter_reset() loop.

   The latency tracers keep writing to the ring buffer without resetting
   when it issues a new "start" event (like interrupts being disabled).
   When reading the buffer with an iterator, the tracing_iter_reset()
   sets its pointer to that start event by walking through all the
   events in the buffer until it gets to the time stamp of the start
   event. In the case of a very large buffer, the loop that looks for
   the start event has been reported taking a very long time with a non
   preempt kernel that it can trigger a soft lock up warning. Add a
   cond_resched() into that loop to make sure that doesn't happen.

 - Use list_del_rcu() for eventfs ei->list variable

   It was reported that running loops of creating and deleting kprobe
   events could cause a crash due to the eventfs list iteration hitting
   a LIST_POISON variable. This is because the list is protected by SRCU
   but when an item is deleted from the list, it was using list_del()
   which poisons the "next" pointer. This is what list_del_rcu() was to
   prevent.

* tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
  tracing/timerlat: Only clear timer if a kthread exists
  tracing/osnoise: Use a cpumask to know what threads are kthreads
  eventfs: Use list_del_rcu() for SRCU protected list variable
  tracing: Avoid possible softlockup in tracing_iter_reset()
  tracing: Fix memory leak in fgraph storage selftest
  tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()

syzbot found an use-after-free Read in ila_nf_input [1]

Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().

It should be done in the reverse way, with a synchronize_rcu().

This is a good match for a pre_exit() method.

[1]
 BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16

CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
  __netif_receive_skb_one_core net/core/dev.c:5661 [inline]
  __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
  process_backlog+0x662/0x15b0 net/core/dev.c:6108
  __napi_poll+0xcb/0x490 net/core/dev.c:6772
  napi_poll net/core/dev.c:6841 [inline]
  net_rx_action+0x89b/0x1240 net/core/dev.c:6963
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
  smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
  prep_new_page mm/page_alloc.c:1501 [inline]
  get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
  __alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
  ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
  __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
  __do_kmalloc_node mm/slub.c:4146 [inline]
  __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
  __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
  ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
  ops_init+0x359/0x610 net/core/net_namespace.c:139
  setup_net+0x515/0xca0 net/core/net_namespace.c:343
  copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508
  create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110
  unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228
  ksys_unshare+0x619/0xc10 kernel/fork.c:3328
  __do_sys_unshare kernel/fork.c:3399 [inline]
  __se_sys_unshare kernel/fork.c:3397 [inline]
  __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397
page last free pid 11846 tgid 11846 stack trace:
  reset_page_owner include/linux/page_owner.h:25 [inline]
  free_pages_prepare mm/page_alloc.c:1094 [inline]
  free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612
  __folio_put+0x2c8/0x440 mm/swap.c:128
  folio_put include/linux/mm.h:1486 [inline]
  free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565
  kfree+0x1c4/0x360 mm/slub.c:4588
  rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169
  ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626
  ops_exit_list net/core/net_namespace.c:173 [inline]
  cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640
  process_one_work kernel/workqueue.c:3231 [inline]
  process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
  worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Memory state around the buggy address:
 ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 7f00feaf ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Execution of command:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml /
	--subscribe "monitor" --sleep 10
fails with:
  File "/repo/./tools/net/ynl/cli.py", line 109, in main
    ynl.check_ntf()
  File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf
    op = self.rsp_by_value[nl_msg.cmd()]
KeyError: 19

Parsing Generic Netlink notification messages performs lookup for op in
the message. The message was not yet decoded, and is not yet considered
GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of
proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13).

Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the
op was not passed to the decode function, thus allow parsing of Generic
Netlink notifications without causing the failure.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/
Fixes: 0a966d60 ("tools/net/ynl: Fix extack decoding for directional ops")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While checking the latest series for ptp_ocp driver I realised that
MAINTAINERS file has wrong item about email on linux.dev domain.

Fixes: 795fd934 ("ptp_ocp: adjust MAINTAINERS and mailmap")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bind_wildcard is compiled but not run, bind_timewait is not compiled.

These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.

The author of the tests confirmed via email that these were
intended to be run.

Enable these two tests.

Fixes: 13715acf ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and
dspi).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add imx@lists.linux.dev and NXP maintainer information for lpspi driver
(drivers/spi/spi-fsl-lpspi.c).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - amd/pmf: ASUS GA403 quirk matching tweak

 - dell-smbios: Fix to the init function rollback path

* tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd: pmf: Make ASUS GA403 quirk generic
  platform/x86: dell-smbios: Fix error path in dell_smbios_init()

Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fix fromShuah Khan:
 "One single fix to a use-after-free bug resulting from
  kunit_driver_create() failing to copy the driver name leaving it on
  the stack or freeing it"

* tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Device wrappers should also manage driver name

The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.

Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.

Remove unneeded "return;" in stop_kthread().

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.

Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.

Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.

Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:

 while true; do
   rtla timerlat top -u -q & PID=$!;
   sleep 5;
   kill -INT $PID;
   sleep 0.001;
   kill -TERM $PID;
   wait $PID;
  done

Causing the following OOPS:

 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc7-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
 RIP: 0010:hrtimer_active+0x58/0x300
 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
 RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
 RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
 R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
 FS:  0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
 Call Trace:
  <TASK>
  ? die_addr+0x40/0xa0
  ? exc_general_protection+0x154/0x230
  ? asm_exc_general_protection+0x26/0x30
  ? hrtimer_active+0x58/0x300
  ? __pfx_mutex_lock+0x10/0x10
  ? __pfx_locks_remove_file+0x10/0x10
  hrtimer_cancel+0x15/0x40
  timerlat_fd_release+0x8e/0x1f0
  ? security_file_release+0x43/0x80
  __fput+0x372/0xb10
  task_work_run+0x11e/0x1f0
  ? _raw_spin_lock+0x85/0xe0
  ? __pfx_task_work_run+0x10/0x10
  ? poison_slab_object+0x109/0x170
  ? do_exit+0x7a0/0x24b0
  do_exit+0x7bd/0x24b0
  ? __pfx_migrate_enable+0x10/0x10
  ? __pfx_do_exit+0x10/0x10
  ? __pfx_read_tsc+0x10/0x10
  ? ktime_get+0x64/0x140
  ? _raw_spin_lock_irq+0x86/0xe0
  do_group_exit+0xb0/0x220
  get_signal+0x17ba/0x1b50
  ? vfs_read+0x179/0xa40
  ? timerlat_fd_read+0x30b/0x9d0
  ? __pfx_get_signal+0x10/0x10
  ? __pfx_timerlat_fd_read+0x10/0x10
  arch_do_signal_or_restart+0x8c/0x570
  ? __pfx_arch_do_signal_or_restart+0x10/0x10
  ? vfs_read+0x179/0xa40
  ? ksys_read+0xfe/0x1d0
  ? __pfx_ksys_read+0x10/0x10
  syscall_exit_to_user_mode+0xbc/0x130
  do_syscall_64+0x74/0x110
  ? __pfx___rseq_handle_notify_resume+0x10/0x10
  ? __pfx_ksys_read+0x10/0x10
  ? fpregs_restore_userregs+0xdb/0x1e0
  ? fpregs_restore_userregs+0xdb/0x1e0
  ? syscall_exit_to_user_mode+0x116/0x130
  ? do_syscall_64+0x74/0x110
  ? do_syscall_64+0x74/0x110
  ? do_syscall_64+0x74/0x110
  entry_SYSCALL_64_after_hwframe+0x71/0x79
 RIP: 0033:0x7ff0070eca9c
 Code: Unable to access opcode bytes at 0x7ff0070eca72.
 RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
 RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
  </TASK>
 Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
 ---[ end trace 0000000000000000 ]---

This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.

Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.

Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/

This was debugged by using the persistent ring buffer:

Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/

Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:

  https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Chi Zhiling reported:

  We found a null pointer accessing in tracefs[1], the reason is that the
  variable 'ei_child' is set to LIST_POISON1, that means the list was
  removed in eventfs_remove_rec. so when access the ei_child->is_freed, the
  panic triggered.

  by the way, the following script can reproduce this panic

  loop1 (){
      while true
      do
          echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events
          echo "" > /sys/kernel/debug/tracing/kprobe_events
      done
  }
  loop2 (){
      while true
      do
          tree /sys/kernel/debug/tracing/events/kprobes/
      done
  }
  loop1 &
  loop2

  [1]:
  [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150
  [ 1147.968239][T17331] Mem abort info:
  [ 1147.971739][T17331]   ESR = 0x0000000096000004
  [ 1147.976172][T17331]   EC = 0x25: DABT (current EL), IL = 32 bits
  [ 1147.982171][T17331]   SET = 0, FnV = 0
  [ 1147.985906][T17331]   EA = 0, S1PTW = 0
  [ 1147.989734][T17331]   FSC = 0x04: level 0 translation fault
  [ 1147.995292][T17331] Data abort info:
  [ 1147.998858][T17331]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
  [ 1148.005023][T17331]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  [ 1148.010759][T17331]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges
  [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP
  [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls]
  [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G        W         ------- ----  6.6.43 #2
  [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650
  [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020
  [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398
  [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398
  [ 1148.115969][T17331] sp : ffff80008d56bbd0
  [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000
  [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100
  [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10
  [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000
  [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0
  [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
  [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0
  [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862
  [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068
  [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001
  [ 1148.198131][T17331] Call trace:
  [ 1148.201259][T17331]  eventfs_iterate+0x2c0/0x398
  [ 1148.205864][T17331]  iterate_dir+0x98/0x188
  [ 1148.210036][T17331]  __arm64_sys_getdents64+0x78/0x160
  [ 1148.215161][T17331]  invoke_syscall+0x78/0x108
  [ 1148.219593][T17331]  el0_svc_common.constprop.0+0x48/0xf0
  [ 1148.224977][T17331]  do_el0_svc+0x24/0x38
  [ 1148.228974][T17331]  el0_svc+0x40/0x168
  [ 1148.232798][T17331]  el0t_64_sync_handler+0x120/0x130
  [ 1148.237836][T17331]  el0t_64_sync+0x1a4/0x1a8
  [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300)
  [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]---

The issue is that list_del() is used on an SRCU protected list variable
before the synchronization occurs. This can poison the list pointers while
there is a reader iterating the list.

This is simply fixed by using list_del_rcu() that is specifically made for
this purpose.

Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home
Fixes: 43aa6f97 ("eventfs: Get rid of dentry pointers without refcounts")
Reported-by: Chi Zhiling <chizhiling@kylinos.cn>
Tested-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).

Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.

Cc: stable@vger.kernel.org
Fixes: 2f26ebd5 ("tracing: use timestamp to determine start of latency traces")
Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.comSuggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Frank Sae says:

====================
Add driver for Motorcomm yt8821 2.5G ethernet phy

yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved
default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14
as phy speed mask.

Be compatible to yt8821, reform phy speed mask and phy speed macro.

Based on update above, add yt8821 2.5G phy driver.
====================

Link: https://patch.msgid.link/20240901083526.163784-1-Frank.Sae@motor-comm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add a driver for the motorcomm yt8821 2.5G ethernet phy. Verified the
driver on BPI-R3(with MediaTek MT7986(Filogic 830) SoC) development board,
which is developed by Guangdong Bipai Technology Co., Ltd..

yt8821 2.5G ethernet phy works in AUTO_BX2500_SGMII or FORCE_BX2500
interface, supports 2.5G/1000M/100M/10M speeds, and wol(magic package).
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved
default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14
as phy speed mask.

Be compatible to yt8821, reform phy speed mask and phy speed macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-09-04-2

this is a pull request of 18 patches for net-next/master.

All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.

The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.

The remaining 17 patches are by me and add the driver in several
stages.

linux-can-next-for-6.12-20240904-2

* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
  can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
  can: rockchip_canfd: add hardware timestamping support
  can: rockchip_canfd: enable full TX-FIFO depth of 2
  can: rockchip_canfd: prepare to use full TX-FIFO depth
  can: rockchip_canfd: add stats support for errata workarounds
  can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
  can: rockchip_canfd: implement workaround for erratum 12
  can: rockchip_canfd: implement workaround for erratum 6
  can: rockchip_canfd: add TX PATH
  can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
  can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
  can: rockchip_canfd: add notes about known issues
  can: rockchip_canfd: add support for rk3568v3
  can: rockchip_canfd: add quirk for broken CAN-FD support
  can: rockchip_canfd: add quirks for errata workarounds
  can: rockchip_canfd: add driver for Rockchip CAN-FD controller
  dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================

Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The commit 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.

Fixes: 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.netSigned-off-by: Mark Brown <broonie@kernel.org>

Replace comma between expressions with semicolons.

Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.

Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904015003.1065872-1-nichen@iscas.ac.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the __counted_by compiler attribute to the flexible array member
entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904014956.2035117-1-lihongbo22@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Hangbin Liu says:

====================
Bonding: support new xfrm state offload functions

Add 2 new xfrm state offload functions xdo_dev_state_advance_esn and
xdo_dev_state_update_stats for bonding. The xdo_dev_state_free will be
added by Jianbo's patchset [1]. I will add the bonding xfrm policy offload
in future.

v7: no update, just rebase the code.
v6: Use "Return: " based on ./scripts/kernel-doc (Simon Horman)
v5: Rebase to latest net-next, update function doc (Jakub Kicinski)
v4: Ratelimit pr_warn (Sabrina Dubroca)
v3: Re-format bond_ipsec_dev, use slave_warn instead of WARN_ON (Nikolay Aleksandrov)
    Fix bond_ipsec_dev defination, add *. (Simon Horman, kernel test robot)
    Fix "real" typo (kernel test robot)
v2: Add a function to process the common device checking (Nikolay Aleksandrov)
    Remove unused variable (Simon Horman)
v1: lore.kernel.org/netdev/20240816035518.203704-1-liuhangbin@gmail.com
====================

Link: https://patch.msgid.link/20240904003457.3847086-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The patch add xfrm statistics update for bonding IPsec offload.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, users can see that bonding supports IPSec HW offload via ethtool.
However, this functionality does not work with NICs like Mellanox cards when
ESN (Extended Sequence Numbers) is enabled, as ESN functions are not yet
supported. This patch adds ESN support to the bonding IPSec device offload,
ensuring proper functionality with NICs that support ESN.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch adds a common function to check the status of IPSec devices.
This function will be useful for future implementations, such as IPSec ESN
and state offload callbacks.
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7.
Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this
moment.

This patch fix it.

Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>