- 11 Jul, 2016 19 commits
-
-
David S. Miller authored
drivers/net/dsa/b53/b53_srab.c: In function 'b53_srab_probe': >> drivers/net/dsa/b53/b53_srab.c:388:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] pdata->chip_id = (u32)of_id->data; ^ Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: init/Kconfig:config BPF_SYSCALL init/Kconfig: bool "Enable bpf() system call" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_ALIAS is a no-op for non-modular code. We replace module.h with init.h since the file does use __init. Cc: Alexei Starovoitov <ast@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Colin Ian King authored
idx can be returned as -ENOSPC, so we should check for this first before using it as an index into nn->vxlan_usecnt[] to avoid an out of bounds array offset read. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jeremy Linton authored
Enable lan91x adapters in some ARM machines and models when booted with an ACPI kernel. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
-
Sabrina Dubroca authored
Some comments weren't updated to reflect the renaming of ndo's and the change of arguments. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Jiri Pirko authored
As requested by Scott, removing him. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Simon Horman authored
Using a combination if #if conditionals and goto labels to unwind tunnel4_init seems unwieldy. This patch takes a simpler approach of directly unregistering previously registered protocols when an error occurs. This fixes a number of problems with the current implementation including the potential presence of labels when they are unused and the potential absence of unregister code when it is needed. Fixes: 8afe97e5 ("tunnels: support MPLS over IPv4 tunnels") Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: implement rfc7496 in sctp This patchset implements "Additional Policies for the Partially Reliable Stream Control Transmission Protocol Extension" described on RFC7496. The Partially Reliable SCTP (PR-SCTP) extension defined in [RFC3758] provides a generic method for senders to abandon user messages. The decision to abandon a user message is sender side only, and the exact condition is called a "PR-SCTP policy". This patchset implements 3 policies: 1. Timed Reliability: This allows the sender to specify a timeout for a user message after which the SCTP stack abandons the user message. 2. Limited Retransmission Policy: Allows limitation of the number of retransmissions. 3. Priority Policy: Allows removal of lower-priority messages if space for higher-priority messages is needed in the send buffer. Patch 1-3 add some sockopts in sctp to set/get pr_sctp policy status. Patch 4-6 implement these 3 policies one by one. ==================== Acked-by:Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
prsctp PRIO policy is a policy to abandon lower priority chunks when asoc doesn't have enough snd buffer, so that the current chunk with higher priority can be queued successfully. Similar to TTL/RTX policy, we will set the priority of the chunk to prsctp_param with sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So if PRIO policy is enabled, msg->expire_at won't work. asoc->sent_cnt_removable will record how many chunks can be checked to remove. If priority policy is enabled, when the chunk is queued into the out_queue, we will increase sent_cnt_removable. When the chunk is moved to abandon_queue or dequeue and free, we will decrease sent_cnt_removable. In sctp_sendmsg, we will check if there is enough snd buffer for current msg and if sent_cnt_removable is not 0. Then try to abandon chunks in sctp_prune_prsctp when sendmsg from the retransmit/transmited queue, and free chunks from out_queue in right order until the abandon+free size > msg_len - sctp_wfree. For the abandon size, we have to wait until it sends FORWARD TSN, receives the sack and the chunks are really freed. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
prsctp RTX policy is a policy to abandon chunks when they are retransmitted beyond the max count. This patch uses sent_count to count how many times one chunk has been sent, and prsctp_param is the max rtx count, which is from sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So similar to TTL policy, if RTX policy is enabled, msg->expire_at won't work. Then in sctp_chunk_abandoned, this patch checks if chunk->sent_count is bigger than chunk->prsctp_param to abandon this chunk. Signed-off-by:
-
Xin Long authored
prsctp TTL policy is a policy to abandon chunks when they expire at the specific time in local stack. It's similar with expires_at in struct sctp_datamsg. This patch uses sinfo->sinfo_timetolive to set the specific time for TTL policy. sinfo->sinfo_timetolive is also used for msg->expires_at. So if prsctp_enable or TTL policy is not enabled, msg->expires_at still works as before. Signed-off-by:
-
Xin Long authored
This patch adds SCTP_PR_ASSOC_STATUS to sctp sockopt, which is used to dump the prsctp statistics info from the asoc. The prsctp statistics includes abandoned_sent/unsent from the asoc. abandoned_sent is the count of the packets we drop packets from retransmit/transmited queue, and abandoned_unsent is the count of the packets we drop from out_queue according to the policy. Note: another option for prsctp statistics dump described in rfc is SCTP_PR_STREAM_STATUS, which is used to dump the prsctp statistics info from each stream. But by now, linux doesn't yet have per stream statistics info, it needs rfc6525 to be implemented. As the prsctp statistics for each stream has to be based on per stream statistics, we will delay it until rfc6525 is done in linux. Signed-off-by:
-
Xin Long authored
This patch adds SCTP_DEFAULT_PRINFO to sctp sockopt. It is used to set/get sctp Partially Reliable Policies' default params, which includes 3 policies (ttl, rtx, prio) and their values. Still, if we set policy params in sndinfo, we will use the params of sndinfo against chunks, instead of the default params. In this patch, we will use 5-8bit of sp/asoc->default_flags to store prsctp policies, and reuse asoc->default_timetolive to store their values. It means if we enable and set prsctp policy, prior ttl timeout in sctp will not work any more. Signed-off-by:
-
Xin Long authored
According to section 4.5 of rfc7496, prsctp_enable should be per asoc. We will add prsctp_enable to both asoc and ep, and replace the places where it used net.sctp->prsctp_enable with asoc->prsctp_enable. ep->prsctp_enable will be initialized with net.sctp->prsctp_enable, and asoc->prsctp_enable will be initialized with ep->prsctp_enable. We can also modify it's value through sockopt SCTP_PR_SUPPORTED. Signed-off-by:
-
Philippe Reynes authored
This reverts commit 4386f566 ("net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings") This patch is wrong, the function phy_ethtool_{get|set}_link_ksettings don't check if the device is running, but the driver bcmgenet need this check. The function {get|set}_settings need to access the mdio bus, and this bus may only be used when the device is running. Otherwise, the clock is disable and a mdio access will fail. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: b53: Add Broadcom NSP switch support This patch series updates the B53 driver to support Broadcom's Northstar Plus Soc integrated switch. Unlike the version of the core present in BCM5301x/Northstar, we cannot read the full chip id of the switch, so we need to get the information about our switch id from Device Tree. Other than that, this is a regular Broadcom Ethernet switch which is register compatible for all practical purposes with the existing switch driver. Since DSA requires a working CPU Ethernet MAC driver this depends on Jon Mason's AMAC/BGMAC driver changes to support NSP. Board specific changes depend on patches present in Broadcom's ARM SoC branches and will be posted in a short while. ==================== Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Florian Fainelli authored
Update the SRAB, core driver and binding document to support the BCM585xx/586xx/88312 integrated switch (Northstar Plus SoCs family). Signed-off-by:
-
Florian Fainelli authored
For Northstart Plus SoCs, we cannot detect the switch because only the revision information is provied in the Management page, instead, rely on Device Tree to tell us the chip id, and pass it down using the b53_platform_data structure. Signed-off-by:
-
Tien Hock Loh authored
This adds support for TSE PCS that uses SGMII adapter when the phy-mode of the dwmac is set to sgmii. Signed-off-by:
Tien Hock Loh <thloh@altera.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 09 Jul, 2016 21 commits
-
-
Eric Dumazet authored
All inet6_netconf_notify_devconf() callers are in process context, so we can use GFP_KERNEL allocations if we take care of not holding a rwlock while not needed in ip6mr (we hold RTNL there) Fixes: d67b8c61 ("netconf: advertise mc_forwarding status") Fixes: f3a1bfb1 ("rtnl/ipv6: use netconf msg to advertise forwarding status") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Eric Dumazet authored
inet_forward_change() runs with RTNL held. We are allowed to sleep if required. If we use __in_dev_get_rtnl() instead of __in_dev_get_rcu(), we no longer have to use GFP_ATOMIC allocations in inet_netconf_notify_devconf(), meaning we are less likely to miss notifications under memory pressure, and wont touch precious memory reserves either and risk dropping incoming packets. inet_netconf_get_devconf() can also use GFP_KERNEL allocation. Fixes: edc9e748 ("rtnl/ipv4: use netconf msg to advertise forwarding status") Fixes: 9e551110 ("rtnl/ipv4: add support of RTM_GETNETCONF") Signed-off-by:
-
David S. Miller authored
Jon Mason says: ==================== net: ethernet: bgmac: Add platform device support David Miller, Please consider including patches 1-5 in net-next Florian Fainelli, Please consider including patches 6 & 7 in devicetree/next Changes in v2: * Made device tree binding changes suggested by Sergei Shtylyov, Ray Jui, Rob Herring, Florian Fainelli, and Arnd Bergmann * Removed devm_* error paths in the bgmac_platform.c suggested by Florian Fainelli * Added Arnd Bergmann's Acked-by to the first 5 (there were changes outlined in the bullets above, but I believe them to be minor enough for him to not revoke his acks) This patch series adds support for other, non-bcma iProc SoC's to the bgmac driver. This series only adds NSP support, but we are interested in adding support for the Cygnus and NS2 families (with more possible down the road). To support non-bcma enabled SoCs, we need to add the standard device tree "platform device" support. Unfortunately, this driver is very tighly coupled with the bcma bus and much unwinding is needed. I tried to break this up into a number of patches to make it more obvious what was being done to add platform device support. I was able to verify that the bcma code still works using a 53012K board (NS SoC), and that the platform code works using a 58625K board (NSP SoC). ==================== Signed-off-by: -
Jon Mason authored
The bcma portion of the driver has been split off into a bcma specific driver. This has been mirrored for the platform driver. The last references to the bcma core struct have been changed into a generic function call. These function calls are wrappers to either the original bcma code or new platform functions that access the same areas via MMIO. This necessitated adding function pointers for both platform and bcma to hide which backend is being used from the generic bgmac code. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Jon Mason authored
The bgmac driver is using the bcma provides device ID and revision, as well as the SoC ID and package, to determine which features are necessary to enable, reset, etc in the driver. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. In place of that, each "feature" has been given a flag, and the flags are enabled for their respective device and SoC. Signed-off-by:
-
Jon Mason authored
Move the BCMA MDIO phy into a separate file, as it is very tightly coupled with the BCMA bus. This will help with the upcoming BCMA removal from the bgmac driver. Optimally, this should be moved into phy drivers, but it is too tightly coupled with the bgmac driver to effectively move it without more changes to the driver. Note: the phy_reset was intentionally removed, as the mdio phy subsystem automatically resets the phy if a reset function pointer is present. In addition to the moving of the driver, this reset function is added. Signed-off-by:
-
Jon Mason authored
The dma buffer allocation, etc references a dma_dev device pointer from the bcma core. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. Add a dma_dev device pointer to the bgmac stuct and reference that instead. Signed-off-by:
-
Jon Mason authored
The bgmac_* print wrappers call dev_* prints with the dev pointer from the bcma core. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. So, simply change all of the bgmac_* prints to their dev_* counterparts. In some cases netdev_* prints are more appropriate, so change those as well. Signed-off-by:
-
Jesper Dangaard Brouer authored
An important information for the napi_poll tracepoint is knowing the work done (packets processed) by the napi_poll() call. Add both the work done and budget, as they are related. Handle trace_napi_poll() param change in dropwatch/drop_monitor and in python perf script netdev-times.py in backward compat way, as python fortunately supports optional parameter handling. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: remove the redundant code Remove the unnacessary code. ==================== Signed-off-by: -
hayeswang authored
There is no conflict between the work_queue function and rtl8152_set_speed(), so we don't have to cancel the delayed work in rtl8152_set_speed(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
After commit 90186af4 ("r8152: fix lockup when runtime PM is enabled"), the autoresume wouldn't start the device before rtl8152_open() is finished. Therefore, we don't have to reset the linking status before and after autoresume. That is, one of netif_carrier_off() in rtl8152_open() could be removed. Signed-off-by:
-
hayeswang authored
In rtl_hw_phy_work_func_t(), the flag of PHY_RESET is set in rtl_ops.hw_phy_cfg() and cleared in rtl8152_set_speed(). Therefore, the rtl_phy_reset() is never run and is unnecessary. Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== net: support MPLS in IPv4 and UDP This short series provides support for MPLS in IPv4 (RFC4023), and by virtue of FOU, MPLS in UDP (RFC7510). The changes are as follows: 1. Teach tunnel4.c about AF_MPLS, it already understands AF_INET and AF_INET6 2. Enhance IPIP and SIT to handle MPLS. Both already handle IPv4. SIT also already handles IPv6. 3. Trivially enhance MPLS to allow routes over SIT and IPIP tunnels. A corresponding patch set for iproute2 has also been provided. Changes since v1 * Correct inverted IPIP protocol logic in SIT patch * Provide usage example below Sample configuration follows: * The following creates a tunnel and routes MPLS packets whose outermost label is 100 over it. The forwarded packets will have the outermost label stack entry, 100, removed and two label stack entries added, the outermost having label 200 and the next having label 300. The local end-point for the tunnel is 10.0.99.192 and the remote endpoint is 10.0.99.193. The local address for encapsulated packets is 10.0.98.192 and the remote address is 10.0.98.193. # Create an MPLS over IPv4 tunnel using the IPIP driver ip link add name tun1 type ipip remote 10.0.99.193 local 10.0.99.192 \ ttl 225 mode mplsip # Bring the tunnel up and an add an IPv4 address and route ip link set up dev tun1 ip addr add 10.0.98.192/24 dev tun1 # Set MPLS route # Allow MPLS forwarding of packets recieved on eth0 echo 1 > /proc/sys/net/mpls/conf/eth0/input # Larger than label to be routed (100) echo 101 > /proc/sys/net/mpls/platform_labels ip -f mpls route add 100 as 200/300 via inet 10.0.98.193 * For FOU (in this case MPLS over UDP) a tunnel may created using: # Packets recieved on UDP port 6635 are MPLS over UDP (IP proto 137) ip fou add port 6635 ipproto 137 # Create the tunnel netdev ip link add name tun1 type ipip remote 10.0.99.193 local 10.0.99.192 \ ttl 225 mode mplsip encap fou encap-sport auto encap-dport 6635 IPv4 address, link and route, and MPLS routing commands are as per the MPLS over IPv4 example * To use the SIT driver instead of the IPIP driver "ipip" may be substituted for "sit" in the above examples. * To create a tunnel that forwards and receives all supported inner-protocols "mplsip" may be substituted for "any" in the above examples. For the IPIP driver this configures both IPv4 and MPLS over IPv4. For the SIT driver this configures IPv6, IPv4 and MPLS over IPv4. ==================== Signed-off-by: -
Simon Horman authored
Allow MPLS routes on IPIP and SIT devices now that they support forwarding MPLS packets. Signed-off-by:
Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by:
-
Simon Horman authored
Extend the IPIP driver to support MPLS over IPv4. The implementation is an extension of existing support for IPv4 over IPv4 and is based of multiple inner-protocol support for the SIT driver. Signed-off-by:
-
Simon Horman authored
Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by:
-
Simon Horman authored
Extend tunnel support to MPLS over IPv4. The implementation extends the existing differentiation between IPIP and IPv6 over IPv4 to also cover MPLS over IPv4. Signed-off-by:
-
Nikolay Aleksandrov authored
As was suggested this patch adds support for the different versions of MLD and IGMP query types. Since the user visible structure is still in net-next we can augment it instead of adding netlink attributes. The distinction between the different IGMP/MLD query types is done as suggested in Section 7.1, RFC 3376 [1] and Section 8.1, RFC 3810 [2] based on query payload size and code for IGMP. Since all IGMP packets go through multicast_rcv() and it uses ip_mc_check_igmp/ipv6_mc_check_mld we can be sure that at least the ip/ipv6 header can be directly used. [1] https://tools.ietf.org/html/rfc3376#section-7 [2] https://tools.ietf.org/html/rfc3810#section-8.1Suggested-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Marcelo Ricardo Leitner authored
When we introduced GSO support, if using auth the auth chunk was being left queued on the packet even after the final segment was generated. Later on sctp_transmit_packet it calls sctp_packet_reset, which zeroed the packet len while not accounting for this left-over. This caused more space to be used the next packet due to the chunk still being queued, but space which wasn't allocated as its size wasn't accounted. The fix is to only queue it back when we know that we are going to generate another segment. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
-
Dan Carpenter authored
This code generates as static checker warning because htons(ETH_P_IPV6) is always true. From the context it looks like the && was intended to be !=. Fixes: 94758f8d ('bnxt_en: Add GRO logic for BCM5731X chips.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
