GitLab

The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Commit 0a0e2ea6 ("ACPI: processor: Move MWAIT quirk out of
acpi_processor.c") moved the MWAIT quirk code into arch/x86 but left
calls to it in the ACPI PDC processor code that is shared with Itanium,
breaking the latter build.

Since the quirk is specific to a certain x86-based platform, stub out
the function acpi_proc_quirk_mwait_check() when building for ia64.

Fixes: 0a0e2ea6

 ("ACPI: processor: Move MWAIT quirk out of acpi_processor.c")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Pull drm ci scripts from Dave Airlie:
 "This is a bunch of ci integration for the freedesktop gitlab instance
  where we currently do upstream userspace testing on diverse sets of
  GPU hardware. From my perspective I think it's an experiment worth
  going with and seeing how the benefits/noise playout keeping these
  files useful.

  Ideally I'd like to get this so we can do pre-merge testing on PRs
  eventually.

  Below is some info from danvet on why we've ended up making the
  decision and how we can roll it back if we decide it was a bad plan.

  Why in upstream?

   - like documentation, testcases, tools CI integration is one of these
     things where you can waste endless amounts of time if you
     accidentally have a version that doesn't match your source code

   - but also like the above, there's a balance, this is the initial cut
     of what we think makes sense to keep in sync vs out-of-tree,
     probably needs...

Pull x86 fixes from Ingo Molnar:
 "Fix preemption delays in the SGX code, remove unnecessarily
  UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
  make the x86 SMP init code a bit more conservative to fix kexec()
  lockups"

* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
  x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
  x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
  x86/smp: Don't send INIT to non-present and non-booted CPUs

Pull x86 perf event fix from Ingo Molnar:
 "Work around a firmware bug in the uncore PMU driver, affecting certain
  Intel systems"

* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on EMR

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "perf tools maintainership:

   - Add git information for perf-tools and perf-tools-next trees and
     branches to the MAINTAINERS file. That is where development now
     takes place and myself and Namhyung Kim have write access, more
     people to come as we emulate other maintainer groups.

  perf record:

   - Record kernel data maps when 'perf record --data' is used, so that
     global variables can be resolved and used in tools that do data
     profiling.

  perf trace:

   - Remove the old, experimental support for BPF events in which a .c
     file was passed as an event: "perf trace -e hello.c" to then get
     compiled and loaded.

     The only known usage for that, that shipped with the kernel as an
     example for such events, augmented the raw_syscalls tracepoints and
     was converted to a libbpf skeleton, reusing all the...

Pull smb client fixes from Steve French:

 - six smb3 client fixes including ones to allow controlling smb3
   directory caching timeout and limits, and one debugging improvement

 - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)

 - one minor spnego registry update

* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  spnego: add missing OID to oid registry
  smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
  cifs: update internal module version number for cifs.ko
  smb3: allow controlling maximum number of cached directories
  smb3: add trace point for queryfs (statfs)
  nls: Hide new NLS_UCS2_UTILS
  smb3: allow controlling length of time directory entries are cached with dir leases
  smb: propagate error code of extract_sharename()

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that can't be extracted.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that does nothing.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.

The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.

Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.

Fixes: 7d58fe73

 ("iov_iter: Add a function to extract a page list from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sh updates from Adrian Glaubitz:

 - Fix a use-after-free bug in the push-switch driver (Duoming Zhou)

 - Fix calls to dma_declare_coherent_memory() that incorrectly passed
   the buffer end address instead of the buffer size as the size
   parameter

* tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
  sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()

Pull more RISC-V updates from Palmer Dabbelt:

 - The kernel now dynamically probes for misaligned access speed, as
   opposed to relying on a table of known implementations.

 - Support for non-coherent devices on systems using the Andes AX45MP
   core, including the RZ/Five SoCs.

 - Support for the V extension in ptrace(), again.

 - Support for KASLR.

 - Support for the BPF prog pack allocator in RISC-V.

 - A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
  soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
  riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
  riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
  riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
  bpf, riscv: use prog pack allocator in th...

The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:

      (cpu 0)                    |      (cpu 1)
switch_drv_remove()              |
 flush_work()                    |
  ...                            |  switch_timer // timer
                                 |   schedule_work(&psw->work)
 timer_shutdown_sync()           |
 ...                             |  switch_work_handler // worker
 kfree(psw) // free              |
                                 |   psw->state = 0 // use

This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations.

Fixes: 9f5e8eee

 ("sh: generic push-switch framework.")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230802033737.9738-1-duoming@zju.edu.cn

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

In all these cases, the last argument to dma_declare_coherent_memory() is
the buffer end address, but the expected value should be the size of the
reserved region.

Fixes: 39fb9930 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver")
Fixes: c2f9b05f ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
Fixes: f3590dc3 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")
Fixes: 186c446f ("media: arch: sh: migor: Use new renesas-ceu camera driver")
Fixes: 1a3c230b

 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230724120742.2187-1-petrtesarik@huaweicloud.com

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Pull more SCSI updates from James Bottomley:
 "Mostly small stragglers that missed the initial merge.

  Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
  due to the volatile qualifier removal, fnic due to unused function
  removal and sd.c has a lot of code shuffling to remove forward
  declarations)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
  scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
  scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
  scsi: mpt3sas: Remove volatile qualifier
  scsi: mpt3sas: Perform additional retries if doorbell read returns 0
  scsi: libsas: Simplify sas_queue_reset() and remove unused code
  scsi: ufs: Fix the build for the old ARM OABI
  scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
  scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  scsi: fnic: Replace sgreset tag with max_tag_id
  scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
  scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
  scsi: smartpqi: Change driver version to 2.1.24-046
  scsi: smartpqi: Enhance error messages
  scsi: smartpqi: Enhance controller offline notification
  scsi: smartpqi: Enhance shutdown notification
  scsi: smartpqi: Simplify lun_number assignment
  scsi: smartpqi: Rename pciinfo to pci_info
  scsi: smartpqi: Rename MACRO to clarify purpose
  scsi: smartpqi: Add abort handler
  ...

Merge tag 'driver-core-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver symbol lookup fix from Greg KH:
 "Here is one last fixup for your tree for 6.6-rc1. It resolves a
  problem with the way that symbol_get was changed in the module tree
  merge in your tree to fix up the DVB drivers which rely on this old
  api to attach new devices.

  As the changelog comment says:

    In commit 9011e49d ("modules: only allow symbol_get of
    EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly
    restricted to GPL-only marked symbols. This interacts oddly with the
    DVB logic which only uses dvb_attach() to load the dvb driver which
    then uses symbol_get().

    Fix this up by properly marking all of the dvb_attach attach symbols
    as EXPORT_SYMBOL_GPL().

  This has been acked by Hans from the V4L driver side, Luis from the
  module side, Mauro on the media side, and Christoph said it was the
  correct solution, and was tested by the original reporter of the
  issue.

  It has passed 0-day testing, but has not been in linux-next due to it
  only being sent yesterday"

* tag 'driver-core-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  media: dvb: symbol fixup for dvb_attach()

Pull dma-mapping fixes from Christoph Hellwig:

 - move a dma-debug call that prints a message out from a lock that's
   causing problems with the lock order in serial drivers (Sergey
   Senozhatsky)

 - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right
   dependency and not default to y (Christoph Hellwig)

 - move an ifdef a bit to remove a __maybe_unused that seems to trip up
   some sensitivities (Christoph Hellwig)

 - revert a bogus check in the CMA allocator (Zhenhua Huang)

* tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping:
  Revert "dma-contiguous: check for memory region overlap"
  dma-pool: remove a __maybe_unused label in atomic_pool_expand
  dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA
  dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

Pull PCI fixes from Bjorn Helgaas:

 - Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build
   error (Lizhi Hou)

 - After coalescing host bridge resources, free any released resources
   to avoid a leak (Ross Lagerwall)

 - Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus
   Reset. The quirk worked around an issue that we now think is related
   to the Root Port, not the GPU (Bjorn Helgaas)

* tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
  PCI: Free released resource after coalescing
  PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies

Pull NTB updates from Jon Mason:
 "Link toggling fixes and debugfs error path fixes"

[ And for everybody like me who always have to remind themselves what
  the TLA of the day is, and what NTB stands for - it's a PCIe
  "Non-Transparent Bridge" thing    - Linus ]

* tag 'ntb-6.6' of https://github.com/jonmason/ntb:
  ntb: Check tx descriptors outstanding instead of head/tail for tx queue
  ntb: Fix calculation ntb_transport_tx_free_entry()
  ntb: Drop packets when qp link is down
  ntb: Clean up tx tail index on link down
  ntb: amd: Drop unnecessary error check for debugfs_create_dir
  NTB: ntb_tool: Switch to memdup_user_nul() helper
  dtivers: ntb: fix parameter check in perf_setup_dbgfs()
  ntb: Remove error checking for debugfs_create_dir()

Add missing OID to the registry. Some servers and clients (including
Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security")

See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02

Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

In commit 9011e49d ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols.  This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().

Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().

Fixes: 9011e49d

 ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull smb server update from Steve French:
 "After two years, many fixes and much testing, ksmbd is no longer
  experimental"

* tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd:
  ksmbd: remove experimental warning

Pull xarray fixes from Matthew Wilcox:

 - Fix a bug encountered by people using bittorrent where they'd get
   NULL pointer dereferences on page cache lookups when using XFS

 - Two documentation fixes

* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
  idr: fix param name in idr_alloc_cyclic() doc
  xarray: Document necessary flag in alloc functions
  XArray: Do not return sibling entries from xa_load()

Pull block fixes from Jens Axboe:

 - Fix null_blk polled IO timeout handling (Chengming)

 - Regression fix for swapped arguments in drbd bvec_set_page()
   (Christoph)

 - String length handling fix for s390 dasd (Heiko)

 - Fixes for blk-throttle accounting (Yu)

 - Fix page pinning issue for same page segments (Christoph)

 - Remove redundant file_remove_privs() call (Christoph)

 - Fix a regression in partition handling for devices not supporting
   partitions (Li)

* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
  drbd: swap bvec_set_page len and offset
  block: fix pin count management when merging same-page segments
  null_blk: fix poll request timeout handling
  s390/dasd: fix string length handling
  block: don't add or resize partition on the disk with GENHD_FL_NO_PART
  block: remove the call to file_remove_privs in blkdev_write_iter
  blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
  blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
  blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
  blk-throttle: print signed value 'carryover_bytes/ios' for user

Pull io_uring fixes from Jens Axboe:
 "A few fixes that should go into the 6.6-rc merge window:

   - Fix for a regression this merge window caused by the SQPOLL
     affinity patch, where we can race with SQPOLL thread shutdown and
     cause an oops when trying to set affinity (Gabriel)

   - Fix for a regression this merge window where fdinfo reading with
     for a ring setup with IORING_SETUP_NO_SQARRAY will attempt to
     deference the non-existing SQ ring array (me)

   - Add the patch that allows more finegrained control over who can use
     io_uring (Matteo)

   - Locking fix for a regression added this merge window for IOPOLL
     overflow (Pavel)

   - IOPOLL fix for stable, breaking our loop if helper threads are
     exiting (Pavel)

  Also had a fix for unreaped iopoll requests from io-wq from Ming, but
  we found an issue with that and hence it got reverted. Will get this
  sorted for a future rc"

* tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux:
  Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"
  io_uring: fix unprotected iopoll overflow
  io_uring: break out of iowq iopoll on teardown
  io_uring: add a sysctl to disable io_uring system-wide
  io_uring/fdinfo: only print ->sq_array[] if it's there
  io_uring: fix IO hang in io_wq_put_and_exit from do_exit()
  io_uring: Don't set affinity on a dying sqpoll thread

There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU
      0X00000004 instead of 0x00000004
make it consistent
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull more thermal control updates from Rafael Wysocki:
 "Eliminate an obsolete thermal zone registration function"

* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Drop thermal_zone_device_register()
  thermal: Use thermal_tripless_zone_device_register()
  thermal: core: Add function for registering tripless thermal zones
  thermal: core: Clean up headers of thermal zone registration functions

Pull power management fix from Rafael Wysocki:
 "Fix an Intel RAPL power capping driver regression introduced during
  the 6.5 development cycle (Srinivas Pandruvada)"

* tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: intel_rapl: Fix invalid setting of Power Limit 4

Pull gpio fix from Bartosz Golaszewski:

 - fix a regression in irqchip setup in gpio-zynq

* tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks

This reverts commit d5af729d.

d5af729d ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.

But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4.  The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.

Revert d5af729d as requested by Wu Zongyong.  This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.

Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for 6.6-rc1. All small and easy ones.

   - The corrections of the previous PCM iov_iter transitions

   - Regression fixes in MIDI 2.0 / USB changes

   - Various ASoC codec fixes for Cirrus, Realtek, WCD

   - ASoC AMD quirks and ASoC Intel AVS driver workaround"

* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek - ALC287 I2S speaker platform support
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
  ASoC: Intel: avs: Provide support for fallback topology
  ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
  ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
  ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
  ASoC: rt5645: NULL pointer access when removing jack
  ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming...

Pull arm64 fixes from Will Deacon:
 "The main one is a fix for a broken strscpy() conversion that landed in
  the merge window and broke early parsing of the kernel command line.

   - Fix an incorrect mask in the CXL PMU driver

   - Fix a regression in early parsing of the kernel command line

   - Fix an IP checksum OoB access reported by syzbot"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: csum: Fix OoB access in IP checksum code for negative lengths
  arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
  perf: CXL: fix mismatched number of counters mask

Merge tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Allow usage of LSX/LASX in the kernel, and use them for
   SIMD-optimized RAID5/RAID6 routines

 - Add Loongson Binary Translation (LBT) extension support

 - Add basic KGDB & KDB support

 - Add building with kcov coverage

 - Add KFENCE (Kernel Electric-Fence) support

 - Add KASAN (Kernel Address Sanitizer) support

 - Some bug fixes and other small changes

 - Update the default config file

* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add KASAN (Kernel Address Sanitizer) support
  LoongArch: Simplify the processing of jumping new kernel for KASLR
  kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
  kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
  LoongArch: Add KFENCE (Kernel Electric-Fe...

Pull printk fix from Petr Mladek:

 - Revert exporting symbols needed for dumping the raw printk buffer in
   panic().

   I pushed the export prematurely before the user was ready for merging
   into the mainline.

* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  Revert "printk: export symbols for debug modules"

Pull landlock updates from Mickaël Salaün:
 "One test fix and a __counted_by annotation"

* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Fix a resource leak
  landlock: Annotate struct landlock_rule with __counted_by

To prevent randconfig build issues when enabling the RZ/Five SoC, consider
selecting specific configurations only when their dependencies are
satisfied.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 484861e0

 ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901110936.313171-1-prabhakar.mahadev-lad.rj@bp.renesas.com

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is
enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to
avoid any build failures.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.

This avoids users to explicitly select MMU.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>